(XT1575) Issue flashing Lollipop Roms - X Style (Pure) Q&A, Help & Troubleshooting

I couldn't find a solution to this problem myself so I was hoping someone else could provide some insight. Whenever I try to flash any Lollipop roms whether it's stock or custom my phone gets stuck on the boot logo and reboots. I tried downgrading TWRP and flashing the stock Lollipop firmware then going to a custom ROM but no avail. Nougat and Marshmallow roms work fine.

Hybrid Theory said:
I couldn't find a solution to this problem myself so I was hoping someone else could provide some insight. Whenever I try to flash any Lollipop roms whether it's stock or custom my phone gets stuck on the boot logo and reboots. I tried downgrading TWRP and flashing the stock Lollipop firmware then going to a custom ROM but no avail. Nougat and Marshmallow roms work fine.
Click to expand...
Click to collapse
You probably will not find a solution as no one has really developed a lollipop ROM utilizing the MM or N bootloader/ radio.

aybarrap1 said:
You probably will not find a solution as no one has really developed a lollipop ROM utilizing the MM or N bootloader/ radio.
Click to expand...
Click to collapse
It's just strange I flashed the boot loader and radio for the stock lollipop firmware and it still boot loop.

Related

NOTE 3 t-mobile soft brick problem

Hi, I flashed Cm 12.1 lollipop rom on my note 3 t-mobile. I was working good but would like to try dom pop rom and could not succeed to install it. try to install TWRP instead of CWM. but stuck while booting. so now phone enter de downloading mode. But can not enter system rom(lollipop was on it) and also recovery mode.
Can i flash Kitkat official stock rom on to Lollipop running system Because there is no Offical stock lollipop rom for Note 3 t-mobile. My phone stuck and soft bricked i think and got advised to back to the official stock rom is the easiest way. I was worry about if i hard brick my phone by flashing older version rom like kitkat. Is there any way to flash kitkat rom after installing lollipop rom.
What can i do at this situation? highly need help i would be appreciated for your help thanks.
John.
johnweurding said:
Hi, I flashed Cm 12.1 lollipop rom on my note 3 t-mobile. I was working good but would like to try dom pop rom and could not succeed to install it. try to install TWRP instead of CWM. but stuck while booting. so now phone enter de downloading mode. But can not enter system rom(lollipop was on it) and also recovery mode.
Can i flash Kitkat official stock rom on to Lollipop running system Because there is no Offical stock lollipop rom for Note 3 t-mobile. My phone stuck and soft bricked i think and got advised to back to the official stock rom is the easiest way. I was worry about if i hard brick my phone by flashing older version rom like kitkat. Is there any way to flash kitkat rom after installing lollipop rom.
What can i do at this situation? highly need help i would be appreciated for your help thanks.
John.
Click to expand...
Click to collapse
Your correct thread have to be HERE.

OJ5 firmware + bootloader + modem - any possibility to flash custom recovery?

Hello dear XDA-Community,
Until now, I kept with Audax Rom 1.2 (based on firmware OH3) with its delivered Audax kernel, but now I wanted to upgrade to OJ5.
Everything went fine with Audax Rom 2.0 (OJ5) - custom kernel from Arter was working as well. I still messed up something though.
I read that the OJ5 firmware/bootloader blocks the flash of any custom recovery. I was a bit too risky and updated my recovery to a newer PhilZ version anyways after I flashed the new bootloader and modem. Now my phone won't boot up anymore. Doesn't matter what I'm trying.
Audax Rom 2.0 (OJ5) with and without custom kernel doesn't boot up. It will only bring me to the stock Samsung bootlogo. But it keeps there.. for an endless amount of time.
I think that I messed up because I still wanted to update my recovery - even after I upgraded to the OJ5 bootloader + firmware + modem.
I wanted to go back to AOH3 now.. and I downloaded the AOH3 stock firmware. Unfortunately it fails to flash in Odin. It literally stops at "cm.bin" and shows "FAIL!".
Is there any way how I can fix my phone again?
I really really need your help, guys. :/
Greetings
Prim
Edit: That's fixed. I can boot now. I installed stock OJ5 firmware.
Apparently there is no way to do a downgrade from AOJ5 to AOH3.
I downloaded the AOJ5 stock firmware and installed it. Everything works fine now.
But due to the fact that it's completely stock, my battery life is horrible (30% loss of battery over 6 hours screen being off.) :crying:
Is there any method to install a custom recovery and kernel after I updated to AOJ5?
A lot of people run AOJ5 with a custom recovery. But my phone is based on the newest bootloader, which now doesn't allow me to install any custom recovery. I really hope there is some workaround for this. I am really not happy with stock AOJ5, as it was supposed to fix the battery drain, but it drains even more than AOH3 :/
Greetings
Prim
Primrose Jy said:
Apparently there is no way to do a downgrade from AOJ5 to AOH3.
I downloaded the AOJ5 stock firmware and installed it. Everything works fine now.
But due to the fact that it's completely stock, my battery life is horrible (30% loss of battery over 6 hours screen being off.) :crying:
Is there any method to install a custom recovery and kernel after I updated to AOJ5?
A lot of people run AOJ5 with a custom recovery. But my phone is based on the newest bootloader, which now doesn't allow me to install any custom recovery. I really hope there is some workaround for this. I am really not happy with stock AOJ5, as it was supposed to fix the battery drain, but it drains even more than AOH3 :/
Greetings
Prim
Click to expand...
Click to collapse
Development options/ OEM Enable and that is all
Oh my actual god. It works. I am now running OJ5 together with the newest modem, custom recovery, custom kernel and ROM.
Thanks a lot, sir. :fingers-crossed:

(SM-910h) IM NOT ABLE TO FLASH STOCK FIRMWARE

Please I own a SM-910H version of the Galaxy Note 4. I tried to flash the N5 ported Sixperience rom but I was experiencing a bootloop because my bootloader wasn't a lollipop 5.1.1 bootloader. I downloaded the 5.1.1 bootloader (910HXXU1COH4) and for some unknown reason I'm not able to flash via odin. It fails whenever it gets to "sboot.bi". I tried flashing the stock firmware, both lollipop 5.0.2 and 5.1.1 but they all fail when it gets to "sboot.bin". But I'm able to flash Recoveries and 910HXXU2COJ4 bootloader.
I reverted back to stock kernel and recovery and still didn't solve the problem. I tried to flash CyanogenMod 12.1 via recovery it also didn't work.
Please I need help to fix this problem because I'm afraid it might affect me in the coming months if I want to flash android 6.0 Marshmallow.
Below are the information on my phone frmware

Upgrading lp to mm, now I can't install custom roms

Don't Know what I am doing wrong. This is my forth phone I've rooted and installed custom roms. I just upgraded from lollypop to Marshmellow, I was running moar rom on lollypop, no problems.
After I upgraded I lost root access so I re-rooted. But now I can not seem to have success on installing a new rom, I've tried two different roms. I follow the instructions and it begins to load and just sits there, even after a good 20 minutes or so. I'm figuring I'm missing something here, please help. My stasts: ,Sprint carreir, model sm-G900P, build MMB29M.G900PVPU3CPCA
macmovr said:
Don't Know what I am doing wrong. This is my forth phone I've rooted and installed custom roms. I just upgraded from lollypop to Marshmellow, I was running moar rom on lollypop, no problems.
After I upgraded I lost root access so I re-rooted. But now I can not seem to have success on installing a new rom, I've tried two different roms. I follow the instructions and it begins to load and just sits there, even after a good 20 minutes or so. I'm figuring I'm missing something here, please help. My stasts: ,Sprint carreir, model sm-G900P, build MMB29M.G900PVPU3CPCA
Click to expand...
Click to collapse
You can't flash lp roms anymore since you have mm bootloader and modem
Hbk6699 said:
You can't flash lp roms anymore since you have mm bootloader and modem
Click to expand...
Click to collapse
Yes he can .. he just need to flash the lollipop modem and bootloader
Supernatural77 said:
Yes he can .. he just need to flash the lollipop modem and bootloader
Click to expand...
Click to collapse
Duh! That's why i said he can't flash lp rom with mm bootloader and modem.
Ok, sorry for being such a dumb ass, but can someone walk me through this. I only know enough to be a total danger to myself and don't want to really f something up that I can't fix.

Note 4 Issues When Flashing Roms, Please Help

My younger brother has a Note 4. It was previously on Kitkat 4.4.2, stock rom, rooted with dual recovery...
He wanted to manually update to either a 5.1.1 Lollipop rom or even 6.01 Marshmallow.
After having tried several 6.01 roms, the phone either bootloops or the sim card is not reading...
After having trying to flash the radio & bootloader to flash via odin, it keeps failing when trying to do so.
Could someone please recommend a simple Lollipop rom or Marshmallow rom that actually WORKS and the sim card is read as it should?
With my current Sony Z2, it is so much simpler, flashing any roms automatically comes with the kernal, radio, recovery, root, etc...
With Samsung it is much more complex and finding a rom which comes with everything seems difficult to find.
Some roms even ask to choose a kernel & modem/radio. How the F**K do i know which one I need? Even when selecting one it results in a bootloop.
I'm not interested in overclocking or using a custom kernel. I just want something that works and any 5.1.1 rom or Marshmallow rom would do. I want something as close as stock as possible. Not interested in Cyanogen mod, custom roms or such.
Thanks!!
you need to flash a compatible modem for your model number and version of android. If it helps, I'm using: N910FXXUICOL2 with Marshmallow
I have the N910F model.
Hmm, I don't know why you are having problems, actually its Samsung where you can simply flash a ROM with Odin, no need of ADB or anything.
You just make sure that you COMPLETELY WIPE your phone before flashing a stock ROM via Odin. You should not have any problem at all, no one should, unless its hardware.

Categories

Resources