Sorry, but I am a newbie so forgive me if this is stupid!
1 I had a slight battery problem so decided (why??) to flash the rom on my unlocked S7 edge. I used the 'BTU' version.
2 after flashing rom i cannot make or receive voice calls
3 i went into a samsung store they said it was an unlocked SM-G935F and had 'XEU' firmware.
4 they kindly reflashed this for me but it didn't solve the problem
5 I have just tried downloading and reflashing again with the XEU firmware. But I still cannot make or receive calls
one weird thing is that the odd text seems to get through to me
Anyone got any ideas on how to unbrick my phone? Very much appreciated.
Sorry, one extra piece of information. I am on '3'. But if I put an O2 sim in the phone it can make and receive calls. But before my first flashing it worked fine with '3'.
It seems I must have flashed the wrong firmware but have no idea what was on there. The previous owner used a EE sim in it. But it was bought not locked to a network - i think. There was no network branding on the phone.
bobbaker1970 said:
Sorry, but I am a newbie so forgive me if this is stupid!
1 I had a slight battery problem so decided (why??) to flash the rom on my unlocked S7 edge. I used the 'BTU' version.
2 after flashing rom i cannot make or receive voice calls
3 i went into a samsung store they said it was an unlocked SM-G935F and had 'XEU' firmware.
4 they kindly reflashed this for me but it didn't solve the problem
5 I have just tried downloading and reflashing again with the XEU firmware. But I still cannot make or receive calls
one weird thing is that the odd text seems to get through to me
Anyone got any ideas on how to unbrick my phone? Very much appreciated.
Sorry, one extra piece of information. I am on '3'. But if I put an O2 sim in the phone it can make and receive calls. But before my first flashing it worked fine with '3'.
It seems I must have flashed the wrong firmware but have no idea what was on there. The previous owner used a EE sim in it. But it was bought not locked to a network - i think. There was no network branding on the phone.
Click to expand...
Click to collapse
Hey, can it boot? If yes then flash a custom rom. Some custom roms have multi csc options. Make sure to enable oem unlock before doing anything and flash modded twrp and take full backup
Sent from my Galaxy S7 Edge using XDA Labs
gupt07ash said:
Hey, can it boot? If yes then flash a custom rom. Some custom roms have multi csc options. Make sure to enable oem unlock before doing anything and flash modded twrp and take full backup
Sent from my Galaxy S7 Edge using XDA Labs
Click to expand...
Click to collapse
Yes it boots and works ok with an O2 sim but not with my '3' sim. Everything else works fine.
Thanks for your reply. But I don't want to use a custom rom. I want to get my stock rom working.
Does anyone know of a solution to this problem please?
Would it be possible to flash the wrong CSC - for example and American CSC - I am in Europe and on European CSC?
Many thanks
Bob
bobbaker1970 said:
Yes it boots and works ok with an O2 sim but not with my '3' sim. Everything else works fine.
Thanks for your reply. But I don't want to use a custom rom. I want to get my stock rom working.
Does anyone know of a solution to this problem please?
Would it be possible to flash the wrong CSC - for example and American CSC - I am in Europe and on European CSC?
Many thanks
Bob
Click to expand...
Click to collapse
Take a look at my thread.
https://forum.xda-developers.com/s7-edge/how-to/g935fd-twrp-backup-t3917485
Sent from my Galaxy S7 Edge using XDA Labs
---------- Post added at 05:06 PM ---------- Previous post was at 05:05 PM ----------
Yes you can install multi csc via root explorer.
Sent from my Galaxy S7 Edge using XDA Labs
gupt07ash said:
Take a look at my thread.
https://forum.xda-developers.com/s7-edge/how-to/g935fd-twrp-backup-t3917485
Sent from my Galaxy S7 Edge using XDA Labs
---------- Post added at 05:06 PM ---------- Previous post was at 05:05 PM ----------
Yes you can install multi csc via root explorer.
Sent from my Galaxy S7 Edge using XDA Labs
Click to expand...
Click to collapse
I'm really not sure why you suggest everyone to install TWRP? People with less knowledge shoudn't know that flashing twrp will break the knox and they won't be able to use secure folder etc. Please put more information with such suggestions.
rroyy said:
I'm really not sure why you suggest everyone to install TWRP? People with less knowledge shoudn't know that flashing twrp will break the knox and they won't be able to use secure folder etc. Please put more information with such suggestions.
Click to expand...
Click to collapse
They're probably already tripping Knox if they're here and seeking help.
I'm replying coz nobody else did and it's merely a suggestion.
Twrp can save a bricked device and it's important to make backups before experimenting. They're not kids ffs
Sent from my Galaxy S7 Edge using XDA Labs
---------- Post added at 05:53 PM ---------- Previous post was at 05:51 PM ----------
Since this guy quoted me, he'll provide you whatever csc you need
Goodbye
Sent from my Galaxy S7 Edge using XDA Labs
gupt07ash said:
They're probably already tripping Knox if they're here and seeking help.
I'm replying coz nobody else did and it's merely a suggestion.
Twrp can save a bricked device and it's important to make backups before experimenting. They're not kids ffs
Sent from my Galaxy S7 Edge using XDA Labs
---------- Post added at 05:53 PM ---------- Previous post was at 05:51 PM ----------
Since this guy quoted me, he'll provide you whatever csc you need
Goodbye
Sent from my Galaxy S7 Edge using XDA Labs
Click to expand...
Click to collapse
I still believe you've to warn them.
---------- Post added at 19:56 ---------- Previous post was at 19:54 ----------
bobbaker1970 said:
Sorry, but I am a newbie so forgive me if this is stupid!
1 I had a slight battery problem so decided (why??) to flash the rom on my unlocked S7 edge. I used the 'BTU' version.
2 after flashing rom i cannot make or receive voice calls
3 i went into a samsung store they said it was an unlocked SM-G935F and had 'XEU' firmware.
4 they kindly reflashed this for me but it didn't solve the problem
5 I have just tried downloading and reflashing again with the XEU firmware. But I still cannot make or receive calls
one weird thing is that the odd text seems to get through to me
Anyone got any ideas on how to unbrick my phone? Very much appreciated.
Sorry, one extra piece of information. I am on '3'. But if I put an O2 sim in the phone it can make and receive calls. But before my first flashing it worked fine with '3'.
It seems I must have flashed the wrong firmware but have no idea what was on there. The previous owner used a EE sim in it. But it was bought not locked to a network - i think. There was no network branding on the phone.
Click to expand...
Click to collapse
Try flashing XEU rom via odin but use CSC file instead of Home CSC you'll loose your data so don't forget to take a backup via Smart Switch.
one more suggestion flash older firmware (again 8.0) from XEU later connect your device to pc and update to latest via smart switch.
rroyy said:
I still believe you've to warn them.
---------- Post added at 19:56 ---------- Previous post was at 19:54 ----------
Try flashing XEU rom via odin but use CSC file instead of Home CSC you'll loose your data so don't forget to take a backup via Smart Switch.
one more suggestion flash older firmware (again 8.0) from XEU later connect your device to pc and update to latest via smart switch.
Click to expand...
Click to collapse
Many thanks that sounds like an interesting idea.
But.............. if I go back to the first version of 8.0 (oreo) will it wreck Knox or anything else to do with security. I want to still be able to use samsung pay for example.
Also, i was told by a samsung shop person that you can't downgrade because there are systems in place to stop you. Though i dont know if he meant from 8 to 7 or from recent 8 to older 8.
I am planning to flash this:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/XEU/download/G935FXXU2EREM/222561/
due to fact that its original software was xeu. Is that ok?
Your help was very valuable thank you
Bob
bobbaker1970 said:
Many thanks that sounds like an interesting idea.
But.............. if I go back to the first version of 8.0 (oreo) will it wreck Knox or anything else to do with security. I want to still be able to use samsung pay for example.
Also, i was told by a samsung shop person that you can't downgrade because there are systems in place to stop you. Though i dont know if he meant from 8 to 7 or from recent 8 to older 8.
I am planning to flash this:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/XEU/download/G935FXXU2EREM/222561/
due to fact that its original software was xeu. Is that ok?
Your help was very valuable thank you
Bob
Click to expand...
Click to collapse
you wont break the knox and you don't have to go that much back just download 2 version back from january or february will be enough.
you can't downgrade your bootloader or turn back to android 7.0 that's what they mean. Smart Switch shpuld fix the problem for you.
rroyy said:
you wont break the knox and you don't have to go that much back just download 2 version back from january or february will be enough.
you can't downgrade your bootloader or turn back to android 7.0 that's what they mean. Smart Switch shpuld fix the problem for you.
Click to expand...
Click to collapse
Many many thanks again Rroyy
Forgive me but I am new to this.
So are you saying:
1. Download:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/XEU/download/G935FXXS3ERLF/251612/
That's the last but one from January 19.
Which has: PDA G935FXXS3ERLF
CSC G935FXEU3ERKF
2. Can I just flash that. Or must I remove the bootloader from that package and put in the current bootloader?
And I was presuming I would do all of that with Odin??? Am I wrong. Is there a way of doing it with smartswitch? (I have reset the phone and got rid of all of my information already)
update: tried flashing last rom , that didnt work. the one before wouldn't flash - i notice it has numbers'3' in the various codes rather than 4.
still not solved
Many thanks again
Bob
bobbaker1970 said:
Many many thanks again Rroyy
Forgive me but I am new to this.
So are you saying:
1. Download:
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935F/XEU/download/G935FXXS3ERLF/251612/
That's the last but one from January 19.
Which has: PDA G935FXXS3ERLF
CSC G935FXEU3ERKF
2. Can I just flash that. Or must I remove the bootloader from that package and put in the current bootloader?
And I was presuming I would do all of that with Odin??? Am I wrong. Is there a way of doing it with smartswitch? (I have reset the phone and got rid of all of my information already)
Many thanks again
Bob
Click to expand...
Click to collapse
Flash the os via odin (select CSC file not home CSC) Untick re-partition option on odin. (Instructions)
Select all files except home_CSC from odin. BL-CP-AP and CSC
After your device boots, skip settings till you see the home page. Connect your device to pc and launch smartswitch (It could ask you to install smart switch to your device) and update latest firmware over smart switch.
rroyy said:
Flash the os via odin (select CSC file not home CSC) Untick re-partition option on odin. (Instructions)
Select all files except home_CSC from odin. BL-CP-AP and CSC
After your device boots, skip settings till you see the home page. Connect your device to pc and launch smartswitch (It could ask you to install smart switch to your device) and update latest firmware over smart switch.
Click to expand...
Click to collapse
Many thanks again Rroyy
Unforunately, I am getting nowhere. And cannot get my phone to work.
Odin will not let me flash any files which have '3' rather than 4 in them. For example I can flash
BL_G935FXXS4ESC1_CL14843133_QB22373776_REV00_user_low_ship.tar.md5
Because it is FXXS4.... the '4' being the important bit
But I cannot flash:
BL_G935FXXU3ERL3_CL14843133_QB20951136_REV00_user_low_ship.tar.md5
because it is FXXU3.... the '3' being the important bit
This seems to reduce me down to the last firmware for both XEU and BTU neither of which enable me to make calls on '3' network like I have done for months before flashing.
Thanks for all of your kind help
It looks like my phone is bricked (
All the best
Bob
bobbaker1970 said:
Many thanks again Rroyy
Unforunately, I am getting nowhere. And cannot get my phone to work.
Odin will not let me flash any files which have '3' rather than 4 in them. For example I can flash
BL_G935FXXS4ESC1_CL14843133_QB22373776_REV00_user_low_ship.tar.md5
Because it is FXXS4.... the '4' being the important bit
But I cannot flash:
BL_G935FXXU3ERL3_CL14843133_QB20951136_REV00_user_low_ship.tar.md5
because it is FXXU3.... the '3' being the important bit
This seems to reduce me down to the last firmware for both XEU and BTU neither of which enable me to make calls on '3' network like I have done for months before flashing.
Thanks for all of your kind help
It looks like my phone is bricked (
All the best
Bob
Click to expand...
Click to collapse
Bob, can you flash latest XEU? We are going to get new security patch update in few weeks. April security patch not yet release. If you can flash latest XEU you can update your device to upcoming update via Smart Switch.
Still bricked: cannot make calls
Thanks for help everyone.
I thought I would give you my conclusions so far in case they are helpful to anyone.
1 My phone was working perfectly for SMS, phone calls and data on the '3' network.
2 Because the battery life didn't seem good I decided to flash it
3 It turns out my phone was initially sold with 'XEU' firmware. But I didn't know that and so I flashed it with 'BTU' firmware - the latest edition.
4 As a result the phone could not make or receive calls on the '3' network. But... it can make and receive calls on the 'O2' network. However, '3' is my contract network and so I want to stay with that. Also, I think the companies are running down 2G transmissions ?? so eventually I may have problems with O2 .
FYI it seems the problem may be that the phone is not sending or receiving certain frequencies as otherwise why would it work ok on O2 but not 3??
**********Tried to resolve by:
5 New sim card
6 Factory reset
7 Clear partition
8 Flashing, again. I tried:
a latest XEU
b latest BTU
c previous XEU
d previous BTU
e previous XEU but with the modem file from EE
f previous XEU but with the modem file from 3
g previous XEU again but then did an over the air update to current XEU
Non of them worked.
*****Conclusion
My phone still will not make or receive calls on the 3 network - it won't register on the network (yes I have tried resetting, selecting network etc etc). It sometimes works with text messages though?? And 4G sometimes works. Otherwise the phone works perfectly, just not for phone calls.
Again on the O2 network all seems to work and I can make and receive calls.
So, to for me, it is bricked in that I can't use it as a phone.
I find it completely inexplicable that I can't get it to work on 3 for calls. There doesn't seem any logic to it.
But thanks everyone for all of your kind help. If anyone has any more suggestions I am willing to try them. Especially if they know how to turn on the relevant frequencies on the phone.
Bit of info: Samsung kindly ran a test to check the reception and transmission of signals. But the test wouldn't even start because it couldn't test the first frequency (apparently it should test lots).
RRoyy
Many thanks again for your reply. You've been very kind with your time.
Yes I can flash the current XEU but it still doesn't work. And I flashed the previous XEU and then did an update using over the air from the phone. But still it doesn't work.
Very best wishes
Bob
Weird
I put an EE sim into my phone (the previous owner had bought it unlocked but used it with an EE contract).
Then I put my '3' sim into my phone. And............ I was able to make one!! call.
After that it stopped working.
That was on XEU where I had downloaded the previous version and let it update over the air.
Does this in any way help diagnose the problem??
Thanks again.
bobbaker1970 said:
RRoyy
Many thanks again for your reply. You've been very kind with your time.
Yes I can flash the current XEU but it still doesn't work. And I flashed the previous XEU and then did an update using over the air from the phone. But still it doesn't work.
Very best wishes
Bob
Click to expand...
Click to collapse
Flash that version and update via smart switch please not ota. I've XEU device and I flashed btu many times to my device never had any problem. Than I update my device to TUR to get updates released bu Turkish operators.
There must be something about installization process that's why I'm asking you to update your device over pc via Smart Switch.
Thank you again RRoyy
I shall do as you suggest.
I think you are saying:
1 Flash previous version of XEU???
2 Then update to current version of XEU using 'smart switch'
3 Should I flash with my '3' sim card in the phone. Or not?
Is that correct?
Also, a small point but I didn't know smartswitch could update firmware. I have never used it. But shall give it a try.
If you could please tell me if the above is correct before I do it I would be most grateful. And thank you again for your time.
Side note: Today I tried an EE sim. It does work, but only on 2G. Not on 3G or auto switch. So, it may be the case that the original flashing of BTU that I did first of all somehow made the phone only 2G? Is that possible?
++Update. Smartswitch spent ages trying to update but failed at the last bit. IT downloaded the software but failed on installation. I have no idea why.
Any suggestions??
Best wishes
Bob
Hello again. So I still haven't had any luck.
I flashed the BTU before the current version. But then the smartswitch wouldn't update it to the current version. It claimed it was already current. It wouldn't update over the air either.
I then flashed the XEU before the current version and I DID manage to get smartswitch to update it to the current version. But '3' sim still not working.
It seems that the problem revolves around certain frequencies that do/don't work on my phone. I suppose it could be a hardware issue though that is unlikely seeing as it happened immediately after I flashed the phone for the first time.
This gives rise to two quesions:
1 Does flashing the firmware get rid of EVERYTHING on the phone. Or does it leave residual bits of information that aren't overwritten?
2 Perhaps the problem is the 'CP' software which seems to be the same for all the options I can flash.
3 If I could flash with firmware from another country with a different CP file perhaps that might push the phone into action.
4 Is there a way to check what frequencies my phone can and cannot receive transmit. I don't mean the specifications. I mean the actual received/transmitted frequencies/bands.
Many thanks again.
Finally, apologies for posting this without logging in but there is a problem with trying to login to the forum on this Chromebook. The space for name and password is not visible. Works ok in windows 10 but not on my chromebook.
Best wishes
Bob
1) Yes I believe the efs of the phone is not wiped when flashing software. Everything else is wiped.
2) You could try another country rom. Just make sure the model number is the same. Changing the CP could work as CP is the modem file.
Related
Dear All,
Trust this finds you well
I have this very unusual problem. I have a Galaxy Note 3 N9005 and I live in Denmark. I havent have any problem with the network what so ever. 4 Days ago, I suddenly realized that I cant make any calls and I get "Not registered on the network". Although I can not make/receive calls, the data seems to be working (3g). I tried other sim cards on the phone and they work perfectly. My sim card also works with any other phone!! I did everything I could find on forums (from flashing new roms to....). I went to Telia store ( Telia is the company I get the network), they tried to reset my number and my sim card, tried new sim cards... but it just doesnt work!! They told me that they havent seen anything like this before. Looks like my phone is blocked on Telia Network!! No Telia sim cards works on my phone but others do!
I have tried new modems, firmwares and etc. The phone is unlocked. Right now I have flashed X-note but its still the same. No matter what Rom (custom or stock) I use, it just doesnt work. Can anyone please help me?? Much appreciated!
Hello, i got exactly the same problem here, i was thinking that the problem was about region lock but in fact it's not.
I tried everything like you, flashing modem, stock rom, custom rom... everything i found on the web and nothing worked for me.... I bought the SM-n9005 1 month ago in france, and now i live in new caledonia, i was able to make call for about 2 weeks without any problem and suddenly, impossible to connect the network. Samsung gived me the region unlock code but didn't make my network work again.
I'm so disapointed. My imei and baseband are correct.
bootlader : N9005XXUGNG1
baseband : N9005XXUGNG1
PDA : N9005DXUGNH1
CRC : N9005ITVGNG1 (audax rom)
Please someone help us !
Hello @yashironc
The interesting thing is that my phone is also from France! I have been using the phone for 6 months and no problem at all! The problem suddenly appeared few days ago. I'm actually considering to change my network provider as it appears to be working on any other one! Hope it will not be the same after some time...
please someone help us
Tried This
one thing can tried is changing the imei number, to a phone thats not connected to a telias network that way it will registered on the network another new phone it looks like your phone got blocked by your carrier
Try this.. It worked for me for my note 2...
Hi I faced the same kind of issue with my note 2 and I found some solution.
1. Download the previous version of firmware from sammobile. ( Eg: If the current version is 4.4.2 you have to download 4.3).
2. Flash the firmware using Odin.
3. After flashing the firmware now update the firmware to current one using Samsung kies.
4. After the updation when the phone reboots your issue may get resolved.
It worked for me. Just try doing that......
---------- Post added at 03:42 PM ---------- Previous post was at 03:35 PM ----------
Hi I faced the same kind of issue with my note 2 and I found some solution.
1. Download the previous version of firmware from sammobile. ( Eg: If the current version is 4.4.2 you have to download 4.2.2).
2. Flash the firmware using Odin.
3. After flashing the firmware now update the firmware to current one using Samsung kies.
4. After the updation when the phone reboots your issue may get resolved.
It worked for me. Just try doing this.........
---------- Post added at 04:01 PM ---------- Previous post was at 03:42 PM ----------
Hi I faced the same kind of issue with my note 2 and I found some solution.
1. Download the previous version of firmware from sammobile. ( Eg: If the current version is 4.4.2 you have to download 4.2.2).
2. Flash the firmware using Odin.
3. After flashing the firmware now update the firmware to current one using Samsung kies.
4. After the updation when the phone reboots your issue may get resolved.
It worked for me. Just try doing this........
Thanks Rafi. I tried this but it didnt work out because when I connect to Kies, it says that I'm using the latest firmware which is strange! Looks like in Denmark, the updates are a bit late. I will try to change my IMEI number, hope it works...
maziar.golestani said:
Thanks Rafi. I tried this but it didnt work out because when I connect to Kies, it says that I'm using the latest firmware which is strange! Looks like in Denmark, the updates are a bit late. I will try to change my IMEI number, hope it works...
Click to expand...
Click to collapse
Yes, may be your phone has been blacked list by Telia network. Ask your Telia network to be sure?
But curiously, how can you change the IMEI?
same problem here after afligt
Hi, i don't know if changing Imei will fix the problem because my carrier don't blacklist phone and I have the same problem here :/ I got now a phone who can't make call. Damn Samsung 700 € for that ?
vndnguyen said:
Yes, may be your phone has been blacked list by Telia network. Ask your Telia network to be sure?
But curiously, how can you change the IMEI?
Click to expand...
Click to collapse
Thanks vndnguyen for your reply. I asked them several times but seems like they havent blocked my phone!! They were in shock like me I finally decided to change my network provider as it was the cheapest and easiest solution. I think if the IMEI number is blocked, I should not be able to receive signal from other providers as well, cause that doesnt make sense in terms of security. Hopefully someone could find the answer to this unusual problem and save some lives Cheers!
maziar.golestani said:
.. if the IMEI number is blocked, I should not be able to receive signal from other providers as well, cause that doesnt make sense in terms of security.
Click to expand...
Click to collapse
Nope, if your imei was blocked, you still can receive signal from your home network, but you can not make a calls.
[email protected] said:
Hi I faced the same kind of issue with my note 2 and I found some solution.
1. Download the previous version of firmware from sammobile. ( Eg: If the current version is 4.4.2 you have to download 4.3).
2. Flash the firmware using Odin.
3. After flashing the firmware now update the firmware to current one using Samsung kies.
4. After the updation when the phone reboots your issue may get resolved.
It worked for me. Just try doing that......
---------- Post added at 03:42 PM ---------- Previous post was at 03:35 PM ----------
Hi I faced the same kind of issue with my note 2 and I found some solution.
1. Download the previous version of firmware from sammobile. ( Eg: If the current version is 4.4.2 you have to download 4.2.2).
2. Flash the firmware using Odin.
3. After flashing the firmware now update the firmware to current one using Samsung kies.
4. After the updation when the phone reboots your issue may get resolved.
It worked for me. Just try doing this.........
---------- Post added at 04:01 PM ---------- Previous post was at 03:42 PM ----------
Hi I faced the same kind of issue with my note 2 and I found some solution.
1. Download the previous version of firmware from sammobile. ( Eg: If the current version is 4.4.2 you have to download 4.2.2).
2. Flash the firmware using Odin.
3. After flashing the firmware now update the firmware to current one using Samsung kies.
4. After the updation when the phone reboots your issue may get resolved.
It worked for me. Just try doing this........
Click to expand...
Click to collapse
NOTE 3 cant DOWNGRADE TO 4.3 if you are on KITKAT bootloader....
lordofbana said:
same problem here after afligt
Click to expand...
Click to collapse
Hi lordofbana where did you get your phone from? Is it also from France??!! have you tried sim cards from other providers?
maziar.golestani said:
Thanks vndnguyen for your reply. I asked them several times but seems like they havent blocked my phone!! They were in shock like me I finally decided to change my network provider as it was the cheapest and easiest solution. I think if the IMEI number is blocked, I should not be able to receive signal from other providers as well, cause that doesnt make sense in terms of security. Hopefully someone could find the answer to this unusual problem and save some lives Cheers!
Click to expand...
Click to collapse
There is a difference between the two IMEI blacklists.
One is Provider-based. Meaning your provider can block your IMEI on their network alone. Other providers work without issue. They used to do this here for a long time if you used a different device than the phone you purchased from them. It still happens in some countries if the device is from another country or sometimes when it runs a customROM.
Providers are also very good at denying this.
The other is the international blacklist. This one renders a phone completely useless worldwide, and is usually reserved for stolen devices.
Sent from my SM-N9005 using Tapatalk 2
maziar.golestani said:
Hi lordofbana where did you get your phone from? Is it also from France??!! have you tried sim cards from other providers?
Click to expand...
Click to collapse
no from italy but the flagit wer to france hhhhhhhhhhhhh and yes i have traied alot
Hi All,
Just picked up my shiny new Gold SM-G9250, and I thought it might be a good idea to start a thread for all of us who own it! Phone has already updated to baseband G9250ZCU1A0D3, and seems to be running very smoothly so far!
Being a Chinese version, there's no Google Services on the phone, so would be curious if anyone has managed to root their phone and get GApps on there yet.
Hope you're all enjoying your phones!
:good:
Hi man!
I'm looking for a green S6 Edge and the only variant that has this color available is the G9250.
So, does it dual sim? or single sim? Does it have any logo on the back saying it is Dual?
Thank you
It's a single sim phone, I'm afraid.
Why are you afraid?
Can you post some pics of your device?
as in 'I'm sorry it isn't Dual Sim.'
Any of you having the low bright and dimming essues ? My s6 edge gets waaay brighter but only outside.... auto or not auto still brightness problems.. software or hardware essues?
I haven't noticed anything yet, but I have mainly been using it indoors - only took it outside for a short while yesterday.
I'm out and about today, so I'll keep an eye on it and post later with what I find.
Still trying to track down root/recovery for this firmware if anyone has been successful? There was a page based on the phone's original firmware, but not sure whether to risk it.
Asrathael said:
I haven't noticed anything yet, but I have mainly been using it indoors - only took it outside for a short while yesterday.
I'm out and about today, so I'll keep an eye on it and post later with what I find.
Still trying to track down root/recovery for this firmware if anyone has been successful? There was a page based on the phone's original firmware, but not sure whether to risk it.
Click to expand...
Click to collapse
I'm rooted used odin
Nice!
Could you direct me to a link for the files you used?
iGordy101, how did you unlock your SM-G9250? Did it come unlocked?
To the other G9250 users, the Taiwan version of the the G9250 comes with Gapps installed, perhaps there is someway to load it onto there?
Based on model numbers released so far, it looks like only the regular S6 will have dual sim option, but only for limited bands.
---------- Post added at 09:46 AM ---------- Previous post was at 09:26 AM ----------
Oh Guys! Not sure about the different regions, but the members on MOBILE01 found that 'crom service' in Samsung Apps is the factory bootloader unlock! I just unlocked my bootloader, ROOT, HERE I COME!
---------- Post added at 10:19 AM ---------- Previous post was at 09:46 AM ----------
I'm So EXCITED! Samsung provides factory bootloader unlocking!
I posted the details here:
http://forum.xda-developers.com/gal...o-bootloader-unlock-s6-edge-sm-g9250-t3086325
Just a quick update.
I also found the CROM service post, unlocked and rooted my Edge. However, the recovery seems to not have taken properly (I'm getting the dm-verity verification failed error when I try to flash a zip or reset the phone). Phone still works fine, but I'm still that elusive step away from getting Gapps running on it!
Haven't had any problems at all with the auto-brightness bug that I can see - perhaps it's a handset issue thing? I'm just waiting for the firmware to appear on Sammobile so I can reflash it and try doing the recovery thing from scratch.
Keep the post updated if any of you have luck getting a working recovery/Gapps on the phone!
Cheers!
Cocytan said:
Just a quick update.
I also found the CROM service post, unlocked and rooted my Edge. However, the recovery seems to not have taken properly (I'm getting the dm-verity verification failed error when I try to flash a zip or reset the phone). Phone still works fine, but I'm still that elusive step away from getting Gapps running on it!
Haven't had any problems at all with the auto-brightness bug that I can see - perhaps it's a handset issue thing? I'm just waiting for the firmware to appear on Sammobile so I can reflash it and try doing the recovery thing from scratch.
Keep the post updated if any of you have luck getting a working recovery/Gapps on the phone!
Cheers!
Click to expand...
Click to collapse
How were you able to use the app? My app force closes.
Sent from my SM-G925V using XDA Premium HD app
I didn't have any problem - found the app on the store, downloaded, it opened and unlocked without issue (and very quickly). I'm model SM-G9250, so it could be because of that.
Anyone had any luck yet finding a fully-working recovery for the AOD3 build? Or any other method of getting Gapps on the phone?
Hong Kong version G9250 , everything is unlocked , single sim and comes with google services. On AOD5 now
That's interesting - is it ok to flash firmwares of different regions between phones of the same model number? HK firmware flashed to a mainland phone for example?
i would also like to know this and if so, how to do it
Apparently it's ok to flash firmware to different regions, but it will break OTA as the CSC codes don't match up.
I've been checking the Chinese message boards, but there isn't currently a working root/recovery for the AOD3 build. Hopefully, some clever person out there can help out with this, as it's way beyond me!
I gave it a try with the HK firmware - didn't work, and soft-bricked phone. Had to flash the original software again. Wouldn't suggest anyone else tries, just in case.
I'm sure the proper files will pop up online soon - no need to rush!
can someone explain the simplest way to get google apps?
ive unlocked the phone using crom, so what is the next step to get google play?
is the simplest method rooting it? Is there a method that works without messing up the phone?
I bought this phone from the USA about year and a half and I'm using it in Macedonia, Europe the whole time. It is a dual sim, but I'm not sure which country it is exactly from, Taiwan maybe I guess?
The model is SM-G935FD and the Baseband version shows: G935FXXU1APB6.
I tried updating it manually, but always says you're using the latest software version even though android 7 has came out a long time ago.
Can you tell me:
1. How can I update to android 7 ?
2. Why am I not receiving an update automatically, even though this feature was working when I bought the phone. I was getting regular updates automatically ever since I bought the phone up unti a point when the 7 came out.
3. If I update the firmware through an SD card or whatever method you suggest its best, will I continue receiving regular updates automatically after I install the v7.0 ?
4. How can I check what country is this phone from?
Lots of questions, would be glad if someone can clear these things up for me so I can understand better how this works with samsung and different countries models etc.
Thanks up front!
try smart switch on PC to update it... frend of mine had s7 flat and no update via mobile phone, as soon as I connected it to pc and turned on smart switch update came out...
NeoDJW said:
try smart switch on PC to update it... frend of mine had s7 flat and no update via mobile phone, as soon as I connected it to pc and turned on smart switch update came out...
Click to expand...
Click to collapse
I wanted to mention that, but I've probably forgot. I did try Smart Switch, but it also said, latest update already installed. Any other ideas?
http://updato.com/firmware-archive-select-model?q=G935FD&rpp=15&order=date&dir=desc&exact=1
NeoDJW said:
http://updato.com/firmware-archive-select-model?q=G935FD&rpp=15&order=date&dir=desc&exact=1
Click to expand...
Click to collapse
I'm sorry for my noobish questions, but can you please explain to me how to choose the country of my firmware? Do I need to choose a country which I currently reside in? Or do I need to choose a country for which the phone was made? I just want to use English language, even though I use it in Macedonia, Europe.
Please kindly advise. Thanks!
1. How can I update to android 7 ?
i had the exact same problem as you smart switch n ota both said i was on latest software. All you need to do is goto sammmobile download firmware for your s7 edge model if your phone is non carrier or unlocked then you can download any carrier version. after that download Odin n Samsung drivers n view an odin flashing tutorial on YouTube.
3. If I update the firmware through an SD card or whatever method you suggest its best, will I continue receiving regular updates automatically after I install the v7.0 ?
I am getting all the 7.0 updates.
4. How can I check what country is this phone from?
if i remember correctly Its written on the smartphone box although u don't need to worry about the country all you need to know is the model number.
But to tell the truth there is no performance difference only ui change but still if u want to be on the latest version then use Odin. good luck.
I have flashed my s7 edge about a dozen times n haven't faced any flashing problem just be sure to use original cable n try not to use the computer while the flashing is happening. use odin in adminstrator mode n if possible kill extra background processes like chrome etc (not needed but i still do it just to be safe)
Alecia1212 said:
1. How can I update to android 7 ?
i had the exact same problem as you smart switch n ota both said i was on latest software. All you need to do is goto sammmobile download firmware for your s7 edge model if your phone is non carrier or unlocked then you can download any carrier version. after that download Odin n Samsung drivers n view an odin flashing tutorial on YouTube.
3. If I update the firmware through an SD card or whatever method you suggest its best, will I continue receiving regular updates automatically after I install the v7.0 ?
I am getting all the 7.0 updates.
4. How can I check what country is this phone from?
if i remember correctly Its written on the smartphone box although u don't need to worry about the country all you need to know is the model number.
But to tell the truth there is no performance difference only ui change but still if u want to be on the latest version then use Odin. good luck.
I have flashed my s7 edge about a dozen times n haven't faced any flashing problem just be sure to use original cable n try not to use the computer while the flashing is happening. use odin in adminstrator mode n if possible kill extra background processes like chrome etc (not needed but i still do it just to be safe)
Click to expand...
Click to collapse
Just checked my phone with PHONE INFO app and there seems to be no CSC code?! All these field are empty:
Original CSC Code: blank
Firmware CSC Code: blank
Active CSC Code: blank
Available CSC Codes: blank
CSC Country: blank
I tried dialing *#1234# and it says:
"USSD code running"
but it shows some kind of error right after:
"connection problem or invalid mmi code"
and does not enter the menu with the CSC code. Tried restarting the phone, switching sim cards and what not.. Nothing worked and I have no clue what my CSC code is now.
My original box is gone and can't really see what country it was made for, but as far as I can remember it didn't say anything on the box. The title of the original amazon.com listing says: Internationally Sourced (Middle East/Africa/Asia) Version G935FD which doesn't say much.
I don't know what to do, I'm a bit scared to flash it with just about any country firmware. There's got to be a way to find more about this phoe CSC?
spiritfly said:
Just checked my phone with PHONE INFO app and there seems to be no CSC code?!
Click to expand...
Click to collapse
Download cpuz app from play store. From the app you will find what is your phone chipset. If it is exynos download any 935fd nougat firmware and flash it with Odin.basically 935fd is a unlock version. it's support all csc version and you will also get update how much I know.
I have an rooted Android 7 on my S7 Edge DUOS without issues.
I'm looking the rom for Oreo but there is not exist yet, I think...
---------- Post added at 07:32 PM ---------- Previous post was at 07:32 PM ----------
I have an rooted Android 7 on my S7 Edge DUOS without issues.
I'm looking the rom for Oreo but there is not exist yet, I think...
Hi first post here but not a complete newbie. But this time I'm stuck big time and would appreciate some help.
I've got a s8 plus that recently started playing up. All of a sudden it started not being able to make or receive calls. But I noticed it only happened when the "conditional call forwarding active" message didn't appear when dialing. I figured it had something to do with call forwarding so try to change the settings on supplementary services settings but when I tried to enter the settings an error message appeared "failed to read data" I tried sending the code manually to cancel voice mail *#022# to see if it would work but I got "connection problem or invalid mmi code" so assumed it could be that the phone is trying to check with the network the forwarding settings as the call starts but for some reason it cannot communicate with it as the mmi codes don't seem to working?? (I'm not that knowledgeable in that area) I tried all the fixes online for the "connection problem or invalid mmi" but none work so I flashed the firmware through Odin even tried a few different ones, I've been playing around with Odin for a while so I'm comfortable with it, I even flashed a pit once for a note 4 that was bricked (just saying so you can see I'm comfortable with using it, not an expert just comfortable) but nothing has fixed my problem my phone is a g955fd running pie and one UI with the latest security update. I've read the duos have some issues with this. I've tried other sim cards on my phone from different carriers and the problem is the same and I'm using my sim on a borrowed phone and no problems. I'm assuming the problem goes deeper than the firmware, could this problem be boot loader related? Would a nand erase and reinstalling the boot loader fix it? Everything else works 100%
Someone please help me, the phone I'm borrowing is an apple and every day I have it I feel weaker and dumber, it's like kryptonite.
Sorry for the long post but I've been browsing xda forums for years and I know that you guys always say to share as much info as possible. By the way I've searched and couldn't find a thread about this but it there is one I promptly apologize and just ask for the link to it if not thanks in advanced.
? G935F or G935U exynos vs snapdragon
Way for snapdragon
Flash https://forum.xda-developers.com/galaxy-s8+/development/rom-t3901074 with odin and test with hard factory reset recoery.
After, flash odin last firmware stock sammobile
Thanks
Thanks for your reply deadedge7
As I said my s8 + is a duos g955fd variant and has an Exynos processor, I'm not sure that rooting it would make much of a difference, as to my understanding rooting doesn't really change the boot loader it just allows you to install a custom recovery and roms. Which is not much different to reflashing a stock rom for all intents and purposes , but I might give it a try anyway. I guess that maybe a rom like the one in the thread you shared might give me some more hidden codes access as a root but I'm not sure. I will try to find a root like it for my variant unless you know of one and can point me to it.
Thanks
Hard reset or flash stock software or hardware problem
For iemi best way is root efs with flash twrp best way for /EFS
https://forum.xda-developers.com/android/general/guide-restore-imei-fix-corrupted-efs-t3116217 read only
Bellboy4510 said:
Thanks for your reply deadedge7
As I said my s8 + is a duos g955fd variant and has an Exynos processor, I'm not sure that rooting it would make much of a difference, as to my understanding rooting doesn't really change the boot loader it just allows you to install a custom recovery and roms. Which is not much different to reflashing a stock rom for all intents and purposes , but I might give it a try anyway. I guess that maybe a rom like the one in the thread you shared might give me some more hidden codes access as a root but I'm not sure. I will try to find a root like it for my variant unless you know of one and can point me to it.
Thanks
Click to expand...
Click to collapse
I am facing the same issue. Same variant. latest update April 1st Security Patch. Data and texting work. but can't make or receive calls. Have you found any solutions?
@unbreakabl3
I am facing the same issue. Same variant. latest update April 1st Security Patch. Data and texting work. but can't make or receive calls. Have you found any solutions?
Click to expand...
Click to collapse
No solution so far. I've rooted the phone and install a couple of custom ROMs but still nothing. I'll try and roll back the firmware and see what happens. I'm no expert but I still think it is fixable. If I find a solution I'll post it on this thread. If you find one please share. My solution at the moment is getting a galaxy A50, very comparable performance with the S8 and really cheap.
Bellboy4510 said:
@unbreakabl3
No solution so far. I've rooted the phone and install a couple of custom ROMs but still nothing. I'll try and roll back the firmware and see what happens. I'm no expert but I still think it is fixable. If I find a solution I'll post it on this thread. If you find one please share. My solution at the moment is getting a galaxy A50, very comparable performance with the S8 and really cheap.
Click to expand...
Click to collapse
I'll keep that in mind. Couple of things to note: I don't get the message conditional call forwarding active. I don't think I ever have.
I tried a different carrier SIM card(T-mobile) and it worked (I'm on At&t). I was able to make and receive calls. Even tried an out of country SIM card and received calls. But my At&t SIM works on other phones perfectly. Go figure lol.
The only other reason I can think of is maybe cos it fell a couple of times from the couch. About 1.5ft. New case kept making it slide off.
Install (Phone INFO SAM).apk
check csc if they are all the same operator
deadedge7 said:
Install (Phone INFO SAM).apk
check csc if they are all the same operator
Click to expand...
Click to collapse
Here is the screenshot from the app
unbreakabl3 said:
Here is the screenshot from the app
Click to expand...
Click to collapse
Original missing and DBT and XSG not same
It must be all same
flash stock firmware odin bl ap cp and csc
Install apk phone info sam
Check csc original and all same
After flashing firmware stock, *#243203855# to choose good csc reset and test
UPDATE:
I need an urgent help however.. I changed my csc to SPRINT from ATnT, using *#272*IMEI number# method. I kept changing to T mobile, and all, until I got stuck with SPRINT.
Now I tried the *#272*IMEI number# method and it won't let me do it with SPRINT CSC.
HELP please ( I just want to go back to ATnT or T mobile again..
Hi guys,
I just gave me iphone xs max to my wife since her iphone 7 is already too buggy and slow. Now that I moved to s10+, I love it and but the customization option is overwhelming me. Happy though that its customizable.
Then I realize 1 critical thing. I bought a snapdragon USA version of AT&T from local importer. I am located in Asia. When I looked at the software version, its only at "G975USQU1ASD3" with security patch, March 2019. I tried for 2 days now to get the OTA update and it just wont come. Saying that I already got the latest update.
Naturally I checked google and found so many updates, and one of them, night mode in camera, I really want. Now I am a newbie in all of these. My question is.. how do I get the non OTA update? I don't have a PC, but I might be able to use my work PC. I do have an micro SD card.
In summary:
1. Where to find the update files? the non OTA version
2. Is it doable without PC?
3. Can I just jump to the latest firmware update, or do I have to do it manually one by one?
4. Will it wipe my phone, because I spent hours customizing it before checking the problem.
Thank you very much if there's anyone willing to help me figuring things out.
regards,
torakun said:
Hi guys,
I just gave me iphone xs max to my wife since her iphone 7 is already too buggy and slow. Now that I moved to s10+, I love it and but the customization option is overwhelming me. Happy though that its customizable.
Then I realize 1 critical thing. I bought a snapdragon USA version of AT&T from local importer. I am located in Asia. When I looked at the software version, its only at "G975USQU1ASD3" with security patch, March 2019. I tried for 2 days now to get the OTA update and it just wont come. Saying that I already got the latest update.
Naturally I checked google and found so many updates, and one of them, night mode in camera, I really want. Now I am a newbie in all of these. My question is.. how do I get the non OTA update? I don't have a PC, but I might be able to use my work PC. I do have an micro SD card.
In summary:
1. Where to find the update files? the non OTA version
2. Is it doable without PC?
3. Can I just jump to the latest firmware update, or do I have to do it manually one by one?
4. Will it wipe my phone, because I spent hours customizing it before checking the problem.
Thank you very much if there's anyone willing to help me figuring things out.
regards,
Click to expand...
Click to collapse
1.You can download firmwares on sammobile.com for your model
2.You can use work PC but need get small software named Odin and samsung drivers for correct work
3.You not need install one by one you can flash directly to latest one but must use HOME_CSC and make backup with samsung app named smart switch which is already on phone if not you can get it on Google Play Store
Poslano z mojega SM-G975F z uporabo Tapatalk
---------- Post added at 06:40 AM ---------- Previous post was at 06:39 AM ----------
Btw you can use Frija software too fir download firmware
Poslano z mojega SM-G975F z uporabo Tapatalk
Hi, check the thread
https://forum.xda-developers.com/s10-plus/how-to/guide-g975f-flashing-megathread-faqs-t3936704
there are answers for all your questions=)
thank you very much guys!
I need an urgent help however.. I changed my csc to SPRINT from ATnT, using *#272*IMEI number# method. I kept changing to T mobile, and all, until I got stuck with SPRINT.
Now I tried the *#272*IMEI number# method and it won't let me do it with SPRINT CSC.
HELP please ( I just want to go back to ATnT or T mobile again..
To try and force a change of the csc power down your phone, remove the SIM card and boot up your phone without any SIM inserted. After the phone has completely booted up insert your SIM and you should get a message that the network settings are being updated.
I purchased an unlocked AT&T S10+ as well to use on T-Mobile. Since you don't actually have AT&T service I would very strongly recommend that you flash the U1 (unlocked) firmware. There are instructions for doing this in another XDA thread.
AT&T firmware is modded specifically for their messaging, network and WiFi services. Since I'm not an AT&T customer I got no OTA updates until I flashed the U1 firmware. Immediately after flashing the U1 firmware and booting up OTA updates were available to download and I receive OTA updates when they are available so there's no further need to manually flash updates using a computer.
The current U1 firmware has night mode for the camera and was just updated this week to the August security patch (which is good for Samsung).
jhs39 said:
To try and force a change of the csc power down your phone, remove the SIM card and boot up your phone without any SIM inserted. After the phone has completely booted up insert your SIM and you should get a message that the network settings are being updated.
I purchased an unlocked AT&T S10+ as well to use on T-Mobile. Since you don't actually have AT&T service I would very strongly recommend that you flash the U1 (unlocked) firmware. There are instructions for doing this in another XDA thread.
AT&T firmware is modded specifically for their messaging, network and WiFi services. Since I'm not an AT&T customer I got no OTA updates until I flashed the U1 firmware. Immediately after flashing the U1 firmware and booting up OTA updates were available to download and I receive OTA updates when they are available so there's no further need to manually flash updates using a computer.
The current U1 firmware has night mode for the camera and was just updated this week to the August security patch (which is good for Samsung).
Click to expand...
Click to collapse
Hi thank you very much for your help. I appreaciate it. However, as you can see from my opening post, I kinda did a mistake and locked myself out of AT&T now.. I am stuck with Sprint after changing CSC 3x feeling safe.. then Spint removed my ability to change CSC via *#272*IMEI#
:crying::crying::crying:
You shouldn't need to change the CSC using the dial code. If you cold start your phone without a SIM card then insert the sim after your phone has fully booted up you should get a message about your network settings updating.
I would also still recommend flashing the U1 unlocked firmware.
jhs39 said:
You shouldn't need to change the CSC using the dial code. If you cold start your phone without a SIM card then insert the sim after your phone has fully booted up you should get a message about your network settings updating.
I would also still recommend flashing the U1 unlocked firmware.
Click to expand...
Click to collapse
Hi thanks again for replying to me. I tried many times doing this but as soon as my SIM card got in, SPRINT OMADM took over.. I can't even get rid of the notification.. sigh..
This might help:
https://forum.xda-developers.com/sp...-to-remove-sprint-omadm-notification-t3636264
That's apparently something annoying that's specific to Sprint.
To get rid of any US carrier stuff on your phone I would still suggest using the modified Odin (which can be found in the XDA firmware flashing threads for the S10+) and flash the U1 firmware version which is carrier free.