[Deprecated] I do not have this zip anymore, please consider using something like this.
Disclaimer: I am not responsible for anything bad that may occur from the use of this zip.
Debugging for any device!Many ROMs often don't allow debugging out of the box while booting up. This could be troublesome to someone trying to capture logcats for a bootloop.
This flashable will allow a user to debug their device. A computer with adb properly setup has a file named "adbkey.pub". This file contains a string/key which can be used by android to authorize debugging.
Setup
Make sure adb and it's drivers is setup and working on your PC
Download the zip.
The zip contains a file named "adbkey.pub". Delete it.
Replace the file with your computer's adbkey.pub
adbkey.pub is typically found:
- Linux: ~/.android/adbkey.pub (directory "~/.android" is hidden)
- Windows: C:\Users\<username>\.android\adbkey.pub
Installation
Turn off your device
Boot into recovery
Flash the zip
Reboot
Download
XDA:DevDB Information
Debugging Enabler, Tool/Utility for all devices (see above for details)
Contributors
Agent_fabulous
Version Information
Status: Testing
Created 2016-09-23
Last Updated 2016-09-24
Thanks
Sent from my A0001 using Tapatalk
thanks bro
Question, how to flash the zip
Working with a Note 4 trying to get usb debugging enabled, im also using Vysor to the device to recover data. What are your recomended steps to flash the zip you provided, just needing a lil help Thank you in advance Brian. ps The screen is cracked but comes to life.
Agent_fabulous said:
Disclaimer: I am not responsible for anything bad that may occur from the use of this zip.
Debugging for any device!Many ROMs often don't allow debugging out of the box while booting up. This could be troublesome to someone trying to capture logcats for a bootloop.
This flashable will allow a user to debug their device. A computer with adb properly setup has a file named "adbkey.pub". This file contains a string/key which can be used by android to authorize debugging.
Setup
Make sure adb and it's drivers is setup and working on your PC
Download the zip.
The zip contains a file named "adbkey.pub". Delete it.
Replace the file with your computer's adbkey.pub
adbkey.pub is typically found:
- Linux: ~/.android/adbkey.pub (directory "~/.android" is hidden)
- Windows: C:\Users\<username>\.android\adbkey.pub
Installation
Turn off your device
Boot into recovery
Flash the zip
Reboot
Download
XDA:DevDB Information
Debugging Enabler, Tool/Utility for all devices (see above for details)
Contributors
Agent_fabulous
Version Information
Status: Testing
Created 2016-09-23
Last Updated 2016-09-24
Click to expand...
Click to collapse
How to flash the zip?
My display on my device doesnt work. Do you know if and how to turn on USB Debugging via adb in Windows 10?
Thanks for the release.
I need to enable ADB debugging.
I am able to goto stock recovery on my ZTE Z982 . I run ADB and try to install with sideload, but I received " Signature verification failed error 21 "
How do we go about signing this zip ?
hey guys the zip link is no longer availiable do you have an alternate link
please anyone can share the zip file, thanks.
hello, can anybody reupp?
not working
IS THERE A way to still get this the download is not working
Agent_fabulous said:
Disclaimer: I am not responsible for anything bad that may occur from the use of this zip.
Debugging for any device!Many ROMs often don't allow debugging out of the box while booting up. This could be troublesome to someone trying to capture logcats for a bootloop.
This flashable will allow a user to debug their device. A computer with adb properly setup has a file named "adbkey.pub". This file contains a string/key which can be used by android to authorize debugging.
Setup
Make sure adb and it's drivers is setup and working on your PC
Download the zip.
The zip contains a file named "adbkey.pub". Delete it.
Replace the file with your computer's adbkey.pub
adbkey.pub is typically found:
- Linux: ~/.android/adbkey.pub (directory "~/.android" is hidden)
- Windows: C:\Users\<username>\.android\adbkey.pub
Installation
Turn off your device
Boot into recovery
Flash the zip
Reboot
Download
XDA:DevDB Information
Debugging Enabler, Tool/Utility for all devices (see above for details)
Contributors
Agent_fabulous
Version Information
Status: Testing
Created 2016-09-23
Last Updated 2016-09-24
Click to expand...
Click to collapse
Bump. I would love to use this tool, but OP's download link is not working.
Disclaimer
Code:
[COLOR="gray"]
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired [B]because the alarm app failed[/B].
* Please do some research if you have any concerns about features included
* in the products you find here before flashing it!
* YOU are choosing to make these modifications.
*/
[/COLOR]
Prerequisites for Installation
- Must have an unlocked bootloader
- Update TWRP to Android-7.1 builds located here. Please make sure to use the recovery image which is appropriate for your device (Thor or Apollo).
Fresh Installation
- Backup your existing ROM first
- Wipe the /data partition (but you can keep the media storage)
- Flash the ROM File
- Flash Open Gapps: use an ARM 7.1 version smaller than the "full" size to make sure it fits
- Reboot
- Enjoy!
LineageOS-eXtended Downloads
LineageOS Builds for Thor (ggow)
LineageOS Builds for Apollo (ggow)
Gapps
- Open Gapps (use a size smaller than "Full" to make sure it fits)
NOTE: Here's what I do to solve the "Play Games" side load issue... Anytime I update my GApps zip file:
- I download the "full" and "mini" versions of GApps
- Extract the "GApps/playgames-arm.tar.lz" file from the "full" file and add it to the "GApps" folder of the "mini" file.
- Open the installer.sh script in the "mini" file and move the "playgames" line from the full_gapps_list= section into the mini_gapps_list= section
- I use this modified "mini" .zip when flashing CM-14.1 ROMs so that my Play Games install always works.
Source Code (branch: cm-14.1)
- LineageOS-eXtended
- Kernel Source
- Common Device Tree
- Thor Device Tree
- Apollo Device Tree
Credits
- LineageOS Team
- Cyanogenmod Team
- LineageOS-eXtended Team
- CodeAurora
- ggow
- Cpasjuste
- dpeddi
XDA:DevDB Information
LineageOS-eXtended, ROM for the Amazon Kindle Fire HDX 7" & 8.9"
Contributors
ggow
ROM OS Version: 7.x Nougat
Version Information
Status: Stable
Created 2018-02-28
Last Updated 2018-02-28
What is different between LineageOS and LineageOS-eXtended?
Mark2014 said:
What is different between LineageOS and LineageOS-eXtended?
Click to expand...
Click to collapse
Responded here: https://forum.xda-developers.com/ki.../rom-lineageos-extended-t3757025/post75736834
The links to download the rom is not working. The hyperlink shows basically the same as the text
Closed per OP request
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about doing this to your device
* YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
OpenWatch OS:
Project OpenWatch is the initiative undertaken by BLOCKS, who came into the limelight for their modular smartwatch. The goal of this is to make an AOSP based fully open source OS (OpenWatch OS) so any smartwatch that can have AOSP builds or be ported to AOSP can have a fully functional Watch OS. We are already working to convert 3 prominent traditional roms to be compatible with smartwatches and their smaller screens.
We also want to give as many smartwatches as possible a central location to get TWRP and information on their devices so instead of having to look everywhere on the internet for information its all under one umbrella.
Tools Required:
Standard MTK drivers installer
https://goo.gl/PraJuZ
SPFlash Tool
https://spflashtool.com/
Harmony
List of confirmed working devices:
Kingwear KW68, KW88, KW88 Pro, KW98, KW99, KW99 Pro
Blocks Watch
Look Watch
Zeblaze Thor, Thor S
IQ I2
Diggro DI01
AllCall W1, W2
TWRP Download: 3.2.2-0
TWRP Image Installer Download: 3.2.2-0
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Here
Install Instructions:
Load this scatter file
Turn off the watch
Press download only
Connect the watch via USB to the computer
Wait till the green checkmark
Unplug the watch and hold the power button until it boots up
Once booted replug in the watch
Do adb reboot recovery in a terminal to boot to twrp
InHarmony
List of confirmed working devices:
Diggro DI06
Older Diggro DI07
Lemfo LES1
TWRP Download: 3.2.2-0
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Here
Install Instructions:
Load this scatter file
Turn off the watch
Press download only
Connect the watch via USB to the computer
Wait till the green checkmark
Unplug the watch and hold the power button until it boots up
Once booted replug in the watch
Do adb reboot recovery in a terminal to boot to twrp
AntiHarmony
List of confirmed working devices:
Newer Microwear H2
TWRP Download: Here
TWRP Image Installer Download: Here
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Prebuilt kernel (For now)
Install Instructions:
Load this scatter file
Turn off the watch
Press download only
Connect the watch via USB to the computer
Wait till the green checkmark
Unplug the watch and hold the power button until it boots up
Once booted replug in the watch
Do adb reboot recovery in a terminal to boot to twrp
If you don't have TWRP installed:
1. With your watch turned on, copy the file "TWRP_patcher.zip" to the /sdcard directory.
2. Turn off your watch.
3. Open spflash tool
4. In the "Scatter-loading File" box choose the "MT6580M_Android_scatter.txt" file located in the "TWRP_image" folder.
5. Press on "Download".
6. Connect the watch dock to the computer.
7. Plug your watch in and wait until a green tick appears on the screen.
8. Pick up your watch and power it on. It will automatically boot to TWRP.
WARNING: the following step (9) will install the default boot.img for the stock rom of the device. If you have another rom installed, be sure to flash it after finishing this guide.
9. On the recovery, go to Install -> Install Zip and select the previously copied file "TWRP_patcher.zip"
10. Wait until it finishes and that's it!
Infinity
List of confirmed working devices:
Lemfo Lem7
Zeblaze Thor 4
TWRP Image Download: 3.2.2-0
TWRP Image Installer Download: 3.2.2-0
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Prebuilt Stock Kernel
Install Instructions:
If you have TWRP installed already:
1. Download the first link which is just the twrp image files
2. Copy the image file to your watch
3. Boot into twrp
4. Click install
5. Click install image
6. Navigate to the twrp image you copied over and select it
7. Find recovery in the list and select it
8. Swipe to confirm
9. Your done
If you don't have TWRP installed:
1. With your watch turned on, copy the file "TWRP_patcher.zip" to the /sdcard directory.
2. Turn off your watch.
3. Open the "SP_Flash_Tool_v5.1824_Win" folder and run "flash_tool.exe".
4. In the "Scatter-loading File" box choose the "MT6737M_Android_scatter.txt" file located in the "TWRP_image" folder.
5. Press on "Download".
6. Connect the watch dock to the computer.
7. Put the watch on your dock and wait until a green tick appears on the screen.
8. Pick up your watch and power it on. It will automatically boot to TWRP.
WARNING: the following step (9) will install the default boot.img for the stock rom of the device. If you have another rom installed, be sure to flash it after finishing this guide.
9. On the recovery, go to Install -> Install Zip and select the previously copied file "TWRP_patcher.zip"
10. Wait until it finishes and that's it!
Unity
List of confirmed working devices:
Kingwear KW06
TWRP Image Download: 3.2.2-0
TWRP Image Installer Download: 3.2.2-0
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Prebuilt Stock Kernel
Install Instructions:
If you have TWRP installed already:
1. Download the first link which is just the twrp image files
2. Copy the image file to your watch
3. Boot into twrp
4. Click install
5. Click install image
6. Navigate to the twrp image you copied over and select it
7. Find recovery in the list and select it
8. Swipe to confirm
9. Your done
If you don't have TWRP installed:
1. With your watch turned on, copy the file "TWRP_patcher.zip" to the /sdcard directory.
2. Turn off your watch.
3. Open spflash tool
4. In the "Scatter-loading File" box choose the "MT6580M_Android_scatter.txt" file located in the "TWRP_image" folder.
5. Press on "Download".
6. Connect the watch dock to the computer.
7. Plug your watch in and wait until a green tick appears on the screen.
8. Pick up your watch and power it on. It will automatically boot to TWRP.
WARNING: the following step (9) will install the default boot.img for the stock rom of the device. If you have another rom installed, be sure to flash it after finishing this guide.
9. On the recovery, go to Install -> Install Zip and select the previously copied file "TWRP_patcher.zip"
10. Wait until it finishes and that's it!
Continuum
List of confirmed working devices:
Lemfo Lem5 Pro
Finow X5 Air
TWRP Image Download: 3.2.2-0
TWRP Image Installer Download: 3.2.2-0
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Prebuilt Stock Kernel
Install Instructions:
If you have TWRP installed already:
1. Download the first link which is just the twrp image files
2. Copy the image file to your watch
3. Boot into twrp
4. Click install
5. Click install image
6. Navigate to the twrp image you copied over and select it
7. Find recovery in the list and select it
8. Swipe to confirm
9. Your done
If you don't have TWRP installed:
1. With your watch turned on, copy the file "TWRP_patcher.zip" to the /sdcard directory.
2. Turn off your watch.
3. Open sp flash tool
4. In the "Scatter-loading File" box choose the "MT6737M_Android_scatter.txt" file located in the "TWRP_image" folder.
5. Press on "Download".
6. Connect the watch to the computer.
7. Put the watch on your dock and wait until a green tick appears on the screen.
8. Pick up your watch and power it on. It will automatically boot to TWRP.
WARNING: the following step (9) will install the default boot.img for the stock rom of the device. If you have another rom installed, be sure to flash it after finishing this guide.
9. On the recovery, go to Install -> Install Zip and select the previously copied file "TWRP_patcher.zip"
10. Wait until it finishes and that's it!
Expanse
List of confirmed working devices:
Zeblaze Thor Pro
TWRP Image Download: 3.2.2-0
TWRP Image Installer Download: 3.2.2-0
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Prebuilt Stock Kernel
Install Instructions:
If you have TWRP installed already:
1. Download the first link which is just the twrp image files
2. Copy the image file to your watch
3. Boot into twrp
4. Click install
5. Click install image
6. Navigate to the twrp image you copied over and select it
7. Find recovery in the list and select it
8. Swipe to confirm
9. Your done
If you don't have TWRP installed:
1. With your watch turned on, copy the file "TWRP_patcher.zip" to the /sdcard directory.
2. Turn off your watch.
3. Open sp flash tool
4. In the "Scatter-loading File" box choose the "MT6737M_Android_scatter.txt" file located in the "TWRP_image" folder.
5. Press on "Download".
6. Connect the watch to the computer.
7. Put the watch on your dock and wait until a green tick appears on the screen.
8. Pick up your watch and power it on. It will automatically boot to TWRP.
WARNING: the following step (9) will install the default boot.img for the stock rom of the device. If you have another rom installed, be sure to flash it after finishing this guide.
9. On the recovery, go to Install -> Install Zip and select the previously copied file "TWRP_patcher.zip"
10. Wait until it finishes and that's it!
Wisp
List of confirmed working devices:
* X02S MT6580
* X01S Plus MT6580
TWRP Image Download: 3.2.2-0
TWRP Image Installer Download: 3.2.2-0
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Prebuilt Stock Kernel
Install Instructions:
If you have TWRP installed already:
1. Download the first link which is just the twrp image files
2. Copy the image file to your watch
3. Boot into twrp
4. Click install
5. Click install image
6. Navigate to the twrp image you copied over and select it
7. Find recovery in the list and select it
8. Swipe to confirm
9. Your done
If you don't have TWRP installed:
1. With your watch turned on, copy the file "TWRP_patcher.zip" to the /sdcard directory.
2. Turn off your watch.
3. Open sp flash tool
4. In the "Scatter-loading File" box choose the "MT6737M_Android_scatter.txt" file located in the "TWRP_image" folder.
5. Press on "Download".
6. Connect the watch to the computer.
7. Put the watch on your dock and wait until a green tick appears on the screen.
8. Pick up your watch and power it on. It will automatically boot to TWRP.
WARNING: the following step (9) will install the default boot.img for the stock rom of the device. If you have another rom installed, be sure to flash it after finishing this guide.
9. On the recovery, go to Install -> Install Zip and select the previously copied file "TWRP_patcher.zip"
10. Wait until it finishes and that's it!
S99
List of confirmed working devices:
Zgpax S99
TWRP Download: Here
TWRP Source Code: Here
Custom roms Download: Coming Soon
Kernel Source Code: Here
Install Instructions:
Load this scatter file
Turn off the watch
Press download only
Connect the watch via USB to the computer
Wait till the green checkmark
Unplug the watch and hold the power button until it boots up
Once booted replug in the watch
Do adb reboot recovery in a terminal to boot to twrp
Watch Bringup:
We are actively working on bringing up the following devices on aosp roms:
Harmony, InHarmony, antiharmony, s99, unity: Android 8.1
Infinity: Android 7.0
If anyone has a watch that would like to get a source built twrp on it please look at the contact us section. It must run full android aka not a mt2xxx
Timeline:
We don't have a timeline that is set in stone because this is all volunteer work but you can take a look at our current to-do/in-progress/done board here
The Team:
Carbon Rom:
@Myself5, @frap129
LineageOS:
@Alberto96, @jrior001, @forkbomb444 @deadman96385
Dirty Unicorns:
@jbats, @danjull
Independent devs:
@corvus, @CaptivateKing @iscle
Contact us:
We have a telegram support group for issues or if you would like to get your watch supported here
You can also PM here on xda if you don't/can't join the telegram
WWWWWWWWWWWWWOOOOOOOOOOOOOOOOOWWWWWWWWWWWWWWWW..! TWRP for watch..! Now that's coooooooool..!
This project looks really promising!
I wish I owned one of these watches, so If could play around with this.
Damm i was hoping for IQI I4 Pro support. Will it be in near future. :good:
Inverted version for DIGGRO DI06 (and others that feature an inverted touchpanel): https://www.androidfilehost.com/?fid=5862345805528050107
Device Tree containing all required changes: https://github.com/GearLabs/twrp_device_mediatek_inharmony
Is it worth while mentioning here that I managed to port an older version of TWRP to the Finow X5 AIR / LEMFO LEM5 Pro a few weeks ago? It's the 2Gb RAM version of the watch. It's over at RASC if anyone wants to have a look. CF
deadman96385 said:
Mine just in case
Click to expand...
Click to collapse
Well done I am very excited to see custom roms for android wear devices in the future hopefully with extra customization like what is present in feature rich roms like Ressurection remix and Aosp Extended.
Finnaly its live for the community
Awesome, cheers
Tutorial
Could someone explain step by step what to do for dummies like me ?
This project spawned out of an idea I had while working at blocks that we should open source some of the work we are doing so the community could benefit from it. Releasing twrp for these devices is just the first step, the primary goal of Openwatch is to get aosp roms on these watches that have been optimized for the smaller screen to replace the normally crappy stock os's. I will admit that there was twrps for a lot of these watches scattered around xda/roundandroidwatches but trying to find them was not an easy task and none of them provided source code to recompile the twrp. So we decided to make this project to put them all under one umbrella. On the note of the 2 different screen types this is the first time we are seeing it all the devices we have tested on so far work fine so if we can get a tester for the other variant we would be more then willing to make a version that supports it. We chose xda rather than round android watch because we all have more experience with it and it's historically been the centre of android development for most devices. We would be more than willing to work with you/others that are on roundandroidwatch just let us know our dev team is primarily rom devs from various rom teams, but also a few app devs. I think our work is coming off as a surprise because its one of the first times full android watches have gotten a lot of attention from xda/press. So people are excited about it especially with source built customs roms being a reality in the near future which was never really a thing in the past.
Is it expected to support a smartwatch with Snapdragon in the future?
deadman96385 said:
This project spawned out of an idea I had while working at blocks that we should open source some of the work we are doing so the community could benefit from it. Releasing twrp for these devices is just the first step, the primary goal of Openwatch is to get aosp roms on these watches that have been optimized for the smaller screen to replace the normally crappy stock os's. I will admit that there was twrps for a lot of these watches scattered around xda/roundandroidwatches but trying to find them was not an easy task and none of them provided source code to recompile the twrp. So we decided to make this project to put them all under one umbrella. On the note of the 2 different screen types this is the first time we are seeing it all the devices we have tested on so far work fine so if we can get a tester for the other variant we would be more then willing to make a version that supports it. We chose xda rather than round android watch because we all have more experience with it and it's historically been the centre of android development for most devices. We would be more than willing to work with you/others that are on roundandroidwatch just let us know our dev team is primarily rom devs from various rom teams, but also a few app devs. I think our work is coming off as a surprise because its one of the first times full android watches have gotten a lot of attention from xda/press. So people are excited about it especially with source built customs roms being a reality in the near future which was never really a thing in the past.
Click to expand...
Click to collapse
Thanks for the PM and sorry for causing any issues with my earlier posts.
It was not my intention to be so reactive.
We all have the same goal so I am seeking a way for us to work together.
Again - apologies for the previous posts.
Cheers
Pablo
mega-samu said:
Is it expected to support a smartwatch with Snapdragon in the future?
Click to expand...
Click to collapse
The base support is there, any watch that can boot aosp roms can use the Openwatch code. So watches with snapdragon would need to be brought up like phones or any other device.
Status update
So since we launched we have gotten quite a bit of activity from various developers and because of that, we have added support for a number of new devices. We are focusing on getting the changes to the OS done so we can start releasing alpha builds to the community.
Infinity:
List of confirmed working devices:
Lemfo Lem7
Zeblaze Thor 4
Source built twrp is up and running
Preliminary source built aosp is up and running
Tested by @iscle
Unity:
List of confirmed working devices:
Kingwear KW06
Source built twrp is up and running
Source built aosp has not been started
Tested by Yours truly
Continuum:
List of confirmed working devices:
Lemfo Lem5 Pro
Finow X5 Air
Source built twrp is up and running
Ported aosp up and running, will now work on source built
Tested by @CerebralFlex
Preview video of the ported rom on Continuum:
I would just like to say thank you all for doing this. Got a zeblaze Thor pro begging for a custom ROM
sephiroth555999 said:
I would just like to say thank you all for doing this. Got a zeblaze Thor pro begging for a custom ROM
Click to expand...
Click to collapse
Could you join the telegram group in the 2nd post, so we can see about supporting the zeblaze thor pro?
I will believe that open watch OS will support Bluetooth calling feature and steady connection.
What about supporting IOS IPhone devices I believe too.
Great idea look forward, I will support you guys
First...what a fantastic idea. Thank you!
I have been chatting to one of the admin over on Telegram, as I own a Smartwear H2 with MTK6580, 1GB Ram and 16GB storage. Unfortunately the Harmony/Inharmony TWRP does boot on the H2 and is correct orientation on the screen (unlike the one over on roundwatches) but the touch screen is unresponsive. The admin over on telegram tried to extract defconfig from the kernel for support, but has not found it possible at the moment. I have therefore emailed Microwear to see if they will provide this information/file.
By the way...the H2 TWRP Recovery over on roundwatches, the touch screen does work...but for some reason the screen and touch is inverted. Screen is upside down, and x/y axis reversed, so to press a button displayed at the bottom of the screen you have to press the top of the screen.
I have emailed Microwear about this too...as it could be they have changed components through production.
Good luck with the project! hopefully I can join the fun.
Yep, you need a recovery for the hehui screens.
We only have the early screen type so it has changed and no longer works.
I will supply the group with the HEHUI stock boot and recovery images for the H2.
Cheers
Pablo.
Sent from my BLA-L29 using Tapatalk
---------- Post added at 10:03 PM ---------- Previous post was at 09:28 PM ----------
Here are the files that you need
https://goo.gl/i74K6F
Sent from my BLA-L29 using Tapatalk
Code:
*** Disclaimer ***
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
YOU are choosing to make these modifications, and if you point your finger at me for messing up your device, I will laugh at you.
This tool should work on ALL Android devices (except Samsung devices) and also works on Custom ROMs (if you have a Samsung with a custom ROM then this will not work).
Requirements[ :/SIZE]
A Unlocked Bootloader
USB Debugging On
The USB Cable that came with your device.
A Windows PC (Windows 10 is recommended).
The TWRP Installer and Image compatible with your phone
Features :
Runs on Command Prompt (Hidden)
Works on all devices (except Samsung Devices)
Works with all versions of TWRP
Installation instructions :
I am assuming you already installed the adb drivers, if not I have a folder inside called "Drivers", you'll find the .exe there.
Download and install WinRAR: 64bit - 32bit
Extract the folder to your C drive directly.
Copy your TWRP image and Installer to C:TWRPFiles and rename both of them to TWRP (image ends with .img and installer with .zip)
Copy your Root .zip file to C:TWRPFiles and rename it to Root (ends with .zip)
Run the TWRP Flasher for your system (64bit or 32bit) and follow all Instructions in the prompts.
Now you have rooted your phone with Magisk/SuperSU and installed TWRP.
The final boss is for last... Press the Thanks button if my tool/s helped even by a little bit.
Credits :
Creator: _Masked_
Lead Coder: _Masked_
Details :
File Name : Universal TWRP Flasher
File Size : 10.4MB
File Type : ZIP
Compatibility : Windows (Any), 32bit and 64bit
MD5 :d584fa3ea0775fe465162171d275af0d
Download
XDA:DevDB Information
Universal TWRP Flasher, Tool/Utility for all devices (see above for details)
Contributors
_Masked_
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2019-04-20
Created 2019-04-20
Last Updated 2019-04-19
Thread closed as duplicate of https://forum.xda-developers.com/android/software-hacking/tool-universal-twrp-installer-t3885710
Code:
* Disclaimer
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
HOW TO ROOT XIAOMI REDMI NOTE 6 PRO
Pre-Requisits
-Unlocked Bootloader
-Have a PC
This is an in general type to tutorial. You are expected to be able to understand some aspects of rooting an android phone
IF YOU ALREADY HAVE DEVELOPER OPTIONS ENABLED SKIP THIS PART
-Go to settings
-About Phone
-Tap MIUI Version 7 times until you get a floating notification that says "You are now a Developer!"
-Go back to main menu and go to additional settings
-Developer options
-Have USB DEBUGGING ENABLED
DOWNLOADS
-Download The latest stable Magisk https://github.com/topjohnwu/Magisk/releases/ Magisk-vXX.X.zip (You might want to do a quick check that the current version has no major bugs.)
-Download The latest version of Orange Fox recovery https://files.orangefox.tech/OrangeFox-Stable/tulip/ OrangeFox-RXX.X_XX-Stable-tulip.zip
-Download ADB-Platform tools https://www.xda-developers.com/install-adb-windows-macos-linux/
-Download the lastest LazyFlasher from https://www.androidinfotech.com/no-verity-opt-encrypt-versions/
-Once you have all your files downloaded copy the folder in OrangeFox called sdcard to your sd. Put the magisk.zip and the no-verity-opt-encrypt.zip files in there aswell. Put the sdcard back in your phone
-Power off phone
-Boot to bootloader(Power + Volume Down)
-plug phone into computer
-open PowerShell and navigate to where your OrangeFox folder is using the cd command.
-
Code:
fastboot devices
Make sure there is something that show up for this
-
Code:
fastboot flash recovery recovery.img
-
Code:
fastboot boot recovery.img
or
Code:
fastboot reboot recovery
-Once OrangeFox is loaded navigate to the folder you put on your sd card previously
-Flash the zip called OF_initd.zip
-Navigate to menu tab -> Restart -> Recovery
-At this point your phone will have Orange Fox installed.
-Once OrangeFox is loaded navigate to where you placed your magisk.zip file
-Flash it
-Go back and flash no-verity-opt-encrypt.zip
-Navigate to menu and reboot to system
DONE!
worked !! thanks!!!
You're too early for the guide ?