Xperifrim Incorrect listings for Z5P Firmware - Xperia Z5 Premium General

Recently Installed a Firmware using Xperifirm
- The firmware i chose to i download was not the correct/ received files.
- It works but i suppose this is not good. it is potentially a complete waste of data
Firmware received:
E6653_32.2.A.5.11_1299-0274_R11C
E6653_32.4.A.1.54_1298-5496_R3E.ftf
Firmware Chosen:
UK Vodaphone
Custom
[Disclaimer]
My post count is too low to post in the DEV section
Addititonal request (offtopic):
If anyone can post guides or links on how to perform a full system DUMP... i.e. make a correct firmware file,
...then i can attempt to make a ttf from a factory Z5P upgraded from 5.1.1. to 6.0 using official system update and provide the correct firmware to xperifirm
?

Try again

Related

A request......regarding OTA update to Android 4.2.2 FW

Hello to all Devs and fans at XDA who see my first post. For years I have watched the community and benefited from the knowledge they shared on the smartphones frontier. But today, I humbly ask for a hand from whoever might be be able to provide me with what I need.Here is situation:
1- I do hate Sony firmwares of Android 4.3 and the new 4.4 firmware because I want to stay LB and I do need to root and mount SYSTEM partition
which are difficult on such firmwares and I simply don't like deodexed flashable roms dear devs here provide.In my opinion Android 4.2.2 FW 14.1.G.2.257 seems to be the best one for me...but how to get this one rooted and stay odexed on LB? here are the steps I took :
2- I was on 4.3 and when i went to 14.1.G.534 my phone lost IMEI and GSM SIGNAL and couldn't OTA to 14.1.G.2.257(much to my surprise the phone downloaded the OTA update but the installation failed, so I flashed 14.1.G.2.257 and then went all the way back to the first firmware of z1 which is rootable: 14.1.G.534
3- I rooted this firmware with Kingo root , updated superSU Pro to the latest version enabled survival mode in its settings and installed recovery but now the OTA updater on the phone detects Android 4.3 FW 14.2.A.0.290 and I have no clue how to make it OTA to 14.1.G.2.257 NOT 14.2.A.0.290. As of now, I am stopped here and wondering if a small flashable zip with my desired OTA update could be provided to solve my problem or any other idea how to have my phone in the desired state...
Your help is highly appreciated :crying:
I'm not sure but I believe that not all firmware versions allows for OTA update from 534 to 257. You might have flashed a 534 firmware that only allows for OTA from 534 to 290. Have you tried the firmware from this thread?
If you are already on the firmware in the above thread, it may be the case that the OTA to 257 is just no longer available. You'll have to flash a de-odexed and pre-rooted 257 firmware (e.g. here).
Thank you for your reply. I am indeed on the firmware you mentioned. If you noticed I had said if Iflashed directly from 290 to 534 I would lose IMEI but my phone detected 257 for OTA update but when it restarted to install, it failed and i was back with no change. If I downgrad from 290 to 257 and then to 534 I will have IMEI and signal back but this time 290 is detected for OTA.Yeah i read the post related to my firmware but I don't need a deoexed rom and I don't know how to redoex it if using that would be my last choice.
hfaz63 said:
Thank you for your reply. I am indeed on the firmware you mentioned. If you noticed I had said if Iflashed directly from 290 to 534 I would lose IMEI but my phone detected 257 for OTA update but when it restarted to install, it failed and i was back with no change. If I downgrad from 290 to 257 and then to 534 I will have IMEI and signal back but this time 290 is detected for OTA.Yeah i read the post related to my firmware but I don't need a deoexed rom and I don't know how to redoex it if using that would be my last choice.
Click to expand...
Click to collapse
On NUT thread you'll find firmware 534.
You can flash that one from 4.3 or even 4.4 and you'll preserve IMEI.
Without IMEI you can't update firmware through OTA so, probably, that was the problem.
Now you should be able to update firmware through OTA.
If that fails or OTA offers latest firmware you don't want to use you can try to find flashable firmware 290 but I doubt we have that...
Sent from my C6903 using Tapatalk
OK i think I know what is going on but could I have a rooted UN-DEODEXED 14.1.G.2.257 on my z1??The method you proposed for upgrading to 257 and keeping root now want's to install 290 on my phone....I wish to install 257 NOT 290
I searched but couldn't find any rooted un-deodexed 257 firmware, and that's why I didn't point you to one in my previous post. I think most of us upgraded via OTA to 257 and kept root, hence there wasn't a need for a developer to create a rooted un-deodexed 257 firmware.

[INFO/TIP] Web sites for official and LEAKED roms..

This post/thread is to summarize where to find full SBF files, leaks, etc for the Moto X (2013 or First Generation).
REMEMBER... Always flash the same ROM/SBF or Newer to your phone. NEVER attempt to downgrade your rom!!! for more info, see DOWNGRADING
Motorola posts their complete STOCK "Recovery Images" (aka SBF files) for the GSM and Verizon Developer Edition X at -> https://motorola-global-portal.custhelp.com/app/standalone/bootloader/recovery-images
If you have the Retail and/or Moto Maker XT1053 (aka Unlocked ships with T-Mobile SIM, or Unlocked Ships with Net10 SIM), you can also use the GSM Developer Edition (XT1053) roms from Moto's site.
If you have the Retail and/or Moto Maker Verizon X (XT1060), you can also use the Verizon Developer Edition (XT1060) roms from Moto's site.
There might be a delay in Moto making an SBF available.
For other models of X, I know of 3 sites for "leaks" which contain the SBF files for nearly every model of X (2013). You may need to check EACH site to find the particular rom you are looking for. NOTE: None of the following sites are owned, operated, or sponsored by Motorola. They may be down or offline at any time, without warning.
http://sbf.droid-developers.org/ <- DEAD when checking on 8/22/15
http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=100&page=1 <- seems to have the most 4.4.4 roms
http://motofirmware.com/files/category/9-ghost/ <- DEAD when checking on 8/22/15 once there, look under the GHOST folder. (as of 11/9/2014, its format and access has changed)
http://motofirmware.center/files/ <- Select Moto X 1St Generation from the list along the right side of the page
Are there any others?
@dagoban has linked a few other in Post #17 of this thread..
dagoban said:
..Really good and fast overview page with most/all files, when you look for something, go here 1st:
https://cloud.mail.ru/public/64a43f0fcc1e/Moto_X or here:
https://cloud.mail.ru/public/a083d0bb5e97/Motorola
Big Thx to OP: http://4pda.ru/forum/index.php?showtopic=514209&st=8360
Click to expand...
Click to collapse
See Post #17 for more direct links.
As 5.1 SBF files become available, they are being collected and curated in this thread -> [OFFICIAL] Collection Full Firmwares (FXZ/SBF) Lollipop 5.1
FAQ:
1. How do I know which file to download?
- If you are NOT running a 3rd Party or Custom ROM... take a look on your phone, under App Drawer -> Settings... Make note of what is listed under System Version, Android Version, and build number. Then visit one (or all) of the sites until you find the SBF that matches. The file name will usually contain parts or all of that info listed under settings, and possibly the carrier name, or acronym for the carrier name (Verizon might be VZW, Rogers Canada might be RCI, etc).
Normally I would suggest BEFORE you flash away from Stock, on the phone you first go App Drawer -> Settings -> About Phone... Make note of what is listed under System Version, Android Version, and build number. Then visit one (or all) of the sites until that host the leaked SBF files until you find the SBF that matches and down load the file to your PC for use later.. The file name will usually contain parts or all of that info listed under settings, and possibly the carrier name, or acronym for the carrier name (Verizon might be VZW, Rogers Canada might be RCI, etc).
So for example: If your phone model is XT1058 and under about phone it reports...
android version is 4.4.4
system version is 212.44.26. ghost_row.RCI.en.ca
build nunber is KXA21.12-L1.26
That tells me you have a Rogers Canada (RCI) XT1058 with 4.4.4 ROM on it. When you look at the file factory site for your SBF, you want to look for a file that contains some/all of that info, like... XT1058_RCI-CA_4.4.4_KXA21.12-L1.26_59_cid14_CFC_1FF.xml.zip
(notice the parts of the "about phone" info and file name which are highlighted in Bold to help illustrate the example)
IF you are already running a CUSTOM or 3Rd party rom, like CM, system version and build number will not match STOCK Moto SBF files
2. Where do all these SBF files come from?
As mentioned earlier, Moto does make the Dev Edition "recovery images" (in SBF format) available on their web site. For all others, the only way for us to get firmware files, is for a copy to be LEAKED to us.. The "Leaked" firmwares are files that are basically "stolen" by a Motorola or wireless carrier employee, who then posts the file on the internet for us... So we can't always count on this ever happening, nor can we have any expectations that a particular firmware will actually get leaked, or when it will be leaked.
There is some talk about using Motorla Device Manager (MDM) app to upgrade your phone, and how during the update process, the app downloads the full FXZ (another term for SBF) to your PC, so it could be copied/saved to another folder for use later. I have not done this with MDM.
EDIT: As of 12/12/14, Only the filefactory.com link is working. The others appear to be down. I don't know the owners of the sites, so I can't say if they will return or not.
EDIT2: As of 1/2/15, motofirmware.com seems to be back up, but sbf.droid-developers.org appears to be gone.
Great info! ??
SBF is my first choice, but when I needed the 4.4.4 retail firmware not found it in SBF, I had to turn to Google and found it.
FTP of Moto Firmware is empty, but the File Factory folder has many versions! Very cool.
if my firmware is currently 4.2.2, can I download the 4.4.2 or 4.4.4 firmware and it would fix a soft brick with 4.2.2? or must i find the 4.2.2 firmware in order to fix the issues?
x000x said:
if my firmware is currently 4.2.2, can I download the 4.4.2 or 4.4.4 firmware and it would fix a soft brick with 4.2.2? or must i find the 4.2.2 firmware in order to fix the issues?
Click to expand...
Click to collapse
I'm not sure what problem you encountered is.. If it is truely "soft bricked" first start by booting the phone to APFastboot/Booloader screen and use fastboot or mFastboot on the PC to erase the phone's cache then try to reboot.
If that doesn't work, generally to recover from any issues, if you can boot into APFasboot/Booloader, check the version on the second line, then download and flash the appropriate ROM version, you can recovery from most soft brick scenarios.
30.70 = original 4.2.2
30.71 = 4.2.2 OTA with camera update
30.B2 = 4.4
30.B4 = 4.4.2
30.B7 = 4.4.4
Once on 4.4.2, 4.4.3 or 4.4.4, NEVER flash an older version ROM!!!
On occasion, you need to use mfastboot, and do a few extra commands (See Option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html )
If you have any questions, please search and see if any threads with your phone's symptoms already exist then post in that thread. If a thread doesn't already exist, start a new one, and post any details of what phone you have (model, carrier), what the symptom is, and what was done leading up to the symptom appearing. The more details you can supply the better.
edit: problem resolved. see my findings: http://forum.xda-developers.com/showpost.php?p=57122184&postcount=635
Thanks Kidjoe
x000x said:
well issue was I was rooted with twrp and silly me I tried to do the ota update. so now it won't get past the warning about unlocked bootloader. I read after the fact that you needed to revert back to stock before taking ota. mine is 30.71, but the other issue is I cannot find that firmware anywhere. my only option in regards to firmware is to use 4.4.2 that I found. I've posted the question here http://forum.xda-developers.com/showthread.php?t=2542219&page=123
Click to expand...
Click to collapse
BUT if you tried to take the OTA while TWRP was on your phone, just boot into fastboot mode on the phone, and do a mfastboot erase cache will get you out of the bootloop. Then you can flash stock recovery on there, take the ota.
Or you can just flash the 4.4.2 or 4.4.4 for your phone, when completed, flash TWRP on there, reboot hte phone to bootloader, enter Recovery/TWRP and root.
Yes, You can flash a higher/newer version without problems. You just can't flash older once 4.4.2 or higher has been flashed to your phone. (the only time its safe to flash older was when you had 4.4 on your phone, and you were Following the SlapMyMoto process to downgrade to 4.2.2. W/Camera Update as part of the process).
Thank you for this!
KidJoe said:
I'm not sure what problem you encountered is.. If it is truely "soft bricked" first start by booting the phone to APFastboot/Booloader screen and use fastboot or mFastboot on the PC to erase the phone's cache then try to reboot.
If that doesn't work, generally to recover from any issues, if you can boot into APFasboot/Booloader, check the version on the second line, then download and flash the appropriate ROM version, you can recovery from most soft brick scenarios.
30.70 = original 4.2.2
30.71 = 4.2.2 OTA with camera update
30.B2 = 4.4
30.B4 = 4.4.2
30.B7 = 4.4.4
Once on 4.4.2, 4.4.3 or 4.4.4, NEVER flash an older version ROM!!!
On occasion, you need to use mfastboot, and do a few extra commands (See Option 5 at -> http://mark.cdmaforums.com/MotoX-ReturnToStock.html )
If you have any questions, please search and see if any threads with your phone's symptoms already exist then post in that thread. If a thread doesn't already exist, start a new one, and post any details of what phone you have (model, carrier), what the symptom is, and what was done leading up to the symptom appearing. The more details you can supply the better.
Click to expand...
Click to collapse
Getting a Moto X VZW dev ed in a few days, and while it may never apply to me, I had his same question.
I understand what you said, but it doesn't really address the issue of if it is OK to use these images to flash to a later version...
I am aware of the risks of flashing to older firmwares, but are their risks to flashing NEWER updates? I have seen people go as far as to recommend flashing the current version first to recover, then updating... But is this necessary?
scryan said:
Getting a Moto X VZW dev ed in a few days, and while it may never apply to me, I had his same question.
I understand what you said, but it doesn't really address the issue of if it is OK to use these images to flash to a later version...
I am aware of the risks of flashing to older firmwares, but are their risks to flashing NEWER updates? I have seen people go as far as to recommend flashing the current version first to recover, then updating... But is this necessary?
Click to expand...
Click to collapse
U can always flash newer images without a problem. It's flashing older images (downgrading) that's a problem.
scryan said:
I am aware of the risks of flashing to older firmwares, but are their risks to flashing NEWER updates? I have seen people go as far as to recommend flashing the current version first to recover, then updating... But is this necessary?
Click to expand...
Click to collapse
The OTA updates are incremental, so you need to be on a certain level to take them. (to take 4.4.4 you need to be on 4.4.2, to take 4.4.2 you need to be on 4.4, etc)
Full SBF/FXZ files are complete roms. They are not incremental like the OTA Updates are. When flashing a FULL SBF/FXZ you can just flash it, so long as its the same version OR newer than what is on your phone, with no need to "step up." In other words, if you have 4.4 on your phone, you can flash directly to 4.4.4 using the full 4.4.4 SBF, without having to flash 4.4.2 on there first.
The risks to keep in mind would be, just like any update...
If you have a locked bootloader, the vulnerabilities exploited to root and disable write protection might be patched in the newer roms, that means you might not be able to root, or the processes may change for the newer rom. However, with an unlocked bootloader, there is no issue rooting and disabling write protection (lollipop is yet to be confirmed).
In either case, since you can't safely downgrade, if you find bugs, other issues (battery life, reception, etc), or there is something you don't like about the rom, you're stuck, since you can't safely downgrade.
THANK YOU SO MUCH every damn site I went to posted a link to a long dead server LIFE SAVER YOU ARE....
Method to go STOCK.
Hey,I'm currently on CM12/5.0.2 Official ROM for ghost[Bootloader unlocked & I had rooted my device for upgrading to CM12 obviously but now Root Checker says that my device is not rooted].My model number is XT1052(Asia Retail/India).I've found a link(but sadly can't post) for the stock ROM on FileFactory but I don't know the further steps to return back to stock.Before upgrading to CM12/5.0.2 I was on 4.4.4 and since Official 5.0.2 is just right around the corner I'd like to go stock(4.4.4). I'd be highly obliged.I've even downloaded a recovery file as posted by @flasherruts in his thread
"Stock Recovery 4.4.4 XT1052". Will your guide for Returning to stock work for me as well?Sorry but I'm new to this community.
Build Number: KXA21.12-L1.26
System Version:212.44.26.ghost_row.AsiaRetail.en.03
Model Number:XT 1052
Thanks in Advance!
the_fiasco said:
Hey,I'm currently on CM12/5.0.2 Official ROM for ghost[Bootloader unlocked & I had rooted my device for upgrading to CM12 obviously but now Root Checker says that my device is not rooted].My model number is XT1052(Asia Retail/India).I've found a link(but sadly can't post) for the stock ROM on FileFactory but I don't know the further steps to return back to stock.Before upgrading to CM12/5.0.2 I was on 4.4.4 and since Official 5.0.2 is just right around the corner I'd like to go stock(4.4.4). I'd be highly obliged.I've even downloaded a recovery file as posted by @flasherruts in his thread
"Stock Recovery 4.4.4 XT1052". Will your guide for Returning to stock work for me as well?Sorry but I'm new to this community.
Build Number: KXA21.12-L1.26
System Version:212.44.26.ghost_row.AsiaRetail.en.03
Model Number:XT 1052
Thanks in Advance!
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515
I suggest you use this : perfect compatible stock firmware for xt1052 asia retail first gen moto x. : http://www.filefactory.com/file/3qr..._4.4.4_KXA21.12-L1.26_18_cid7_CFC_1FF.xml.zip pl. check it with someone else just in case if I'm wrong. pm me if you have any problems
Hey, thanks for replying!
Yeah, I found this stock recovery a while ago and downloaded it and now back to stock 4.4.4. Thanks a lot!
Sent from my Moto X using XDA Free mobile app
@KidJoe since filefactory is really slow, I searched for some alternatives and found some good ones, maybe you could add it to your 1st post?
Really good and fast overview page with most/all files, when you look for something, go here 1st:
https://cloud.mail.ru/public/64a43f0fcc1e/Moto_X or here:
https://cloud.mail.ru/public/a083d0bb5e97/Motorola
Big Thx to OP: http://4pda.ru/forum/index.php?showtopic=514209&st=8360
Some other alternatives:
XT1053 4.4.2; 4.4.3; 4.4.4 (downloading from mega server (fast!)), thx to OP (http://www.grupoandroid.com/topic/110743-aporte-firmware-t-mobile-retail-442/):
TMO_RETAIL_XT1053_4.4.2-KXA20.16-1.25_MR3_CFC.xml.zip: https://mega.co.nz/#!7RJygbQI!Sbx-bGRV8NbRsqLKS-d33nM_SEgY81czr8rye2ROYb0
TMO_RETAIL_XT1053_4.4.3-KXA21.12-L1.21_MR4_CFC.xml.zip: https://mega.co.nz/#!HQ4l2JIT!LD1gf8m2GxBou3NDFD8lzuxSi2OCn37X7Vhbe-hjNqc
TMO_RETAIL_XT1053_4.4.4_213.44.1.ghost_row.Retail.en.US_MR4_CFC.tgz: https://mega.co.nz/#!zIJhlSCS!o9B7xvRSJ9gTCdTYjXdmVActEmdWRBvhIVjs8JUHI8Q
XT1052_RETAIL-EU_4.4.4_KXA21.12-L1.26_54_cid7_CFC_1FF.xml.zip: https://yadi.sk/d/M2H9LMFJbYiag
from mega (fast!):http://www.mega.co.nz/#!jZgjECZT!sG0-9Vqngms551gwv9PfejY1mw_5QCL8Pg48KTVx4m0
XT1052_RETAIL-​GB_4.4.4_KXA21​.12-L1.26_56_c​id7_CFC_1FF.xm​l.zip: https://yadi.sk/d/KLmLR43SbYiaX
XT1052_RETAIL-​DE_4.4.4_KXA21​.12-L1.26_54_c​id7_CFC_1FF.xm​l.zip: https://yadi.sk/d/hDEHw2O-bYiae
For Brazilians user's
http://www.motoforum.com.br/topic/4...oto-g-2014-moto-e-moto-maxx-nexus-6-moto-360/
Does anyone know of a link that contains the Rogers 4.4.4 file? I need it to update to 5.1.
I have tried the filefactory link but after the countdown, the file is unavailable. I haven't seen any other links for it.
Thanks
I have the same problem. I've looked everywhere and cannot find the rogers 4.4.4 file.
If anyone has it download, could you please share with us.
Alternatively, would i be able to Flash XT1058_VIVO-BR_4.4.4_KXA21.12-L1.26_59_cid12_CFC_1FF.xml.zip since the build versions are the same?
I only need the 4.4.4 in order to install the Lolipop update.
Thanks

Failed at modem.bin when flashing 6.0.1 stock firmware

Howdy! Please help me newbie with this problem. Mine is SM-G928F, its region is DBT, which is Germany. My current firmware is 5.1.1. As I haven't received Marshmallow update OTA, as well as when I checked for update in Smart Switch, I decided to use SamFirm and download the suitable 6.0.1 firmware for my Region. And then I used Odin to flash it, with Kies uninstalled, Samsung drivers up-to-date and so on according to the instruction I've read. Now what I have is a fancy brick with the Samsung brand on it ( I can still get into download mode. What should I do now?
Access the following link to see my problem: (Cuz I cannot add links, I added a space):
h ttps://drive.google.com/open?id=0B4DyzkBV73L2ZTRKbFRzbzJQN1E
Blooderman said:
Howdy! Please help me newbie with this problem. Mine is SM-G928F, its region is DBT, which is Germany. My current firmware is 5.1.1. As I haven't received Marshmallow update OTA, as well as when I checked for update in Smart Switch, I decided to use SamFirm and download the suitable 6.0.1 firmware for my Region. And then I used Odin to flash it, with Kies uninstalled, Samsung drivers up-to-date and so on according to the instruction I've read. Now what I have is a fancy brick with the Samsung brand on it ( I can still get into download mode. What should I do now?
Access the following link to see my problem: (Cuz I cannot add links, I added a space):
h ttps://drive.google.com/open?id=0B4DyzkBV73L2ZTRKbFRzbzJQN1E
Click to expand...
Click to collapse
Hey, you may try another firmware or follow the procedure(in the video) to avoid that failure. Exclude modem.bin from firmware and find the another one which fits F variant then flash it after firmware..

Zenfone 3 ZE552KL Z012DE Nougat Update?

I have a Zenfone 3 Z012DE and I do not know what firmware to install, since I have seen different models in the roms and otas uploaded to the forum, I do not know how to check the correct model to which my equipment corresponds
Is possible update to Nougat?, not link for my Firmware of my model ...
Edit: ZE552KL (Asus Z012DE)
Thanks
First off, as a new user I am unable to supply you the link directly to the page but I can direct you to where you would find your update:
If you search in Google "Zenfone 3 Z012DE" (Without quotation marks obviously) then the first link should be an Asus page. Once the page opens, you will see a bunch of gallery pictures of your device, near the top right under the search bar you should see Support, click it. Then, go to Driver & Tools, select Android as your OS and a few boxes should appear. On the second box, you will see the latest Nougat update for your device (WW-14.2020.1706.53). If you notice in your screenshot, your software code starts with WW, only download firmwares that start with WW off Asus support page since those are the only ones that will work with your devices. Unfortunately, if your phone works the same way as mine, your build indicates the date 09/09/2016 which means the latest update may not work because it will refuse to update on a build that is older than 01/20/2017 (I think that's the exact date) in which case you will have to download and upgrade each version at a time until you get to the lastest firmware.
To install the updates, copy them over to an SD card from a PC or download it through your phone and make sure you know where to find it on the SD card, boot into recovery and hit update from SD card.
Necrodaemon said:
I have a Zenfone 3 Z012DE and I do not know what firmware to install, since I have seen different models in the roms and otas uploaded to the forum, I do not know how to check the correct model to which my equipment corresponds
Is possible update to Nougat?, not link for my Firmware of my model ...
Edit: ZE552KL (Asus Z012DE)
Thanks
Click to expand...
Click to collapse
Flash WW_13.20.10.152 first.
After flashing, update your device to WW_14.2015.1701.8/ WW_14.2015.1701.13
After upgrading to Nougat, flash the new WW_14.2020.1706.53 firmware.
P.S: These update files can be found on ASUS' website.
Hope this helps
SaktisWRXSTi said:
Flash WW_13.20.10.152 first.
After flashing, update your device to WW_14.2015.1701.8/ WW_14.2015.1701.13
After upgrading to Nougat, flash the new WW_14.2020.1706.53 firmware.
P.S: These update files can be found on ASUS' website.
Hope this helps
Click to expand...
Click to collapse
Thanks, for me worked this way and flashed last ww nougat.
Receveid yesterday z012de, luckily ww version with android 6.0.1 version not upgradable online.
SaktisWRXSTi said:
Flash WW_13.20.10.152 first.
After flashing, update your device to WW_14.2015.1701.8/ WW_14.2015.1701.13
After upgrading to Nougat, flash the new WW_14.2020.1706.53 firmware.
P.S: These update files can be found on ASUS' website.
Hope this helps
Click to expand...
Click to collapse
Good afternoon, I can install firmware ww15 (Android 8) ASUS_Z012DE?
At the moment I have the firmware WW_13.20.10.152.
Do I have to install the firmware WW_14.2015.1701.8 and then the WW_14.2020.1706.53?
Or can I move from the WW_13.20.10.152 firmware directly to WW-15.0410.1712.31 or WW-15.0410.1801.40?
helder3678 said:
Good afternoon, I can install firmware ww15 (Android 8) ASUS_Z012DE?
At the moment I have the firmware WW_13.20.10.152.
Do I have to install the firmware WW_14.2015.1701.8 and then the WW_14.2020.1706.53?
Or can I move from the WW_13.20.10.152 firmware directly to WW-15.0410.1712.31 or WW-15.0410.1801.40?
Click to expand...
Click to collapse
I have similar question. I can install firmware ww15 (Android 8) ASUS_Z012DE?
At the moment I have the firmware WW_14.2020.1709.68. I tried upgrade to WW_14.2020.1711.75, to WW_14.2020.1711.79, to WW_14.2020.1711.85 but don't work. installation aborted. What should i do?

[FTF] Customized TW (E5823) stock firmware dump - 32.1.A.1.185 to 32.4.A.0.160

I've sold my Z5C, so I no longer have use for these FTF files I have stored on my computer.
I figured I'd share them here before I delete them from my drive, since it includes older versions that can be difficult to obtain.
In hindsight, I probably should have done this earlier... but better late than never, right?
The earliest firmware version I have is 32.1.A.1.185, and I've uploaded each subsequent release up to 32.4.A.0.160.
Curiously, 32.2.A.0.305 is still available on Sony's servers along with 32.4.A.0.160 according to XperiFirm.
However, with 32.4.A.1.54 just around the corner, there's no telling when they'd get removed, so grab those from Sony while you still can. It's still better to get it from the official source if possible.
These are pure, untouched, stock official Sony firmware. I only downloaded a single region, Customized TW, so please don't request other regions from me, I don't have it and have no means of procuring one.
You are more than welcome to share your own FTF files in this thread for the benefit of the community though, in fact I encourage it.
FTF Download links:
32.1.A.1.185
32.2.A.0.224
32.2.A.0.253
32.2.A.0.305
32.3.A.2.33
32.4.A.0.160
Note: I've already deleted the files on my drive to clear up space, so there's no use in asking me to reupload if any of the links die.
that is useful, thank you !
your file use 4G or LTE indicator?

Categories

Resources