Database Users

Tab 4 LTE SM-T535 recognized as matissewifi

SOLVED: TWRP 3.0.3 uploaded by sub77 on androidfilehost doesn't properly recognize devices. I flashed the older 3.0.2-8 and it works fine and let me able to flash matisselte rom. Anyway, I flashed crdroid but It's stuck on boot animation.
Hello everybody,
I recently bought a secondhand Galaxy Tab 4 SM-T535. It has the android stock rom 5.2 and I wanted to flash a CM or any custom rom to speed it up a bit and remove all pre-installed apps. I did flash TWRP through Odin and it works fine, then I copied Gapps for 7.1 pico versión and crDroid custom rom based on LineageOS 14.1 and nougat 7.1 for matisselte aka Tab 4 SM-T535. I followed instructions (that are pretty the same for every custom rom) so I wiped dalvik, cache, system and data, then I flashed (tried to) crDroid 14.1 zip and... TWRP says something like: unable to flash zip, it is for device matisselte but this is matissewifi. Wtf?! So, ok. I thought I'm blind and I got the wrong version, I downloaded the matissewifi version, tried to flash again and it did flash. Then I flashed Gapps and rebooted, now it goes directly in download mode and says Could not boot normally... What is happening? I also tried CM 14.1 for matissewifi, it flashes but can't boot and I'm unable to flash the matisselte version. Why?
it is for sure the LTE tablet, I read it in settings and info in the android stock rom and it has a sim slot, so it can't be the wifi one.
Thank you in advance for any reply. Let me know if you need more informations. Thanks.
P. S. I already searched in the forum and didn't find any similar case.

Hi,
has anybody found a solution...?
seen too late.....
"SOLVED: TWRP 3.0.3 uploaded by sub77 on androidfilehost doesn't properly recognize devices. I flashed the older 3.0.2-8 and it works fine and let me able to flash matisselte rom. Anyway, I flashed crdroid but It's stuck on boot animation. "

So glad you posted this because I had failed in all my attempts and had tried a few TWRP versions but not that one, which worked perfectly with Lineage 14.1.

Attempts to install LOS 16 (Pie) always fails

I've been contending with this issue - whenever I install any of the LOS 16 ROMs they do not boot, I get a black screen, no reboot. Have to hold power for 10 seconds to restart and fastboot load TWRP to do any sort of recovery.
Is there something I could be missing? I've followed a lot of different methods, got LOS 15.1 running just fine, but all attempts to run LOS 16 seem to result in this.
Any suggestions?
Using this for LOS 16: https://forum.xda-developers.com/mi-a1/development/rom-lineageos-16-0-xiaomi-mi-a1-t3885100
Tried several TWRP versions, 3.2.1, 3.2.3, even CosmicDan one doesn't seem to take hold when LOS 16 is installed.

Re-check all steps. Have you upgrade to Pie stock before flashing LOS 16?

Flash march stock and then Flash los16. I did the same today for resurrection remix.

Thanks for the help, you guys were right, I was trying to come from 8.0. I went with the latest MIUI ROM (from Xiaomi's website, under Mi A1 Downloads) after reverting the system back to stock (using the EDL tool). After that everything seems to be working fine.

Locked in fastboot mode after sideloading Lineage OS

I was running on OOS 10.3 rooted with Magisk and flashed TWRP.
I tried to install Lineage OS 16 (the last version from the official website), but after sideloading it and the superSU file in TWRP I could only reboot in the Lineage recovery mode. I tried to flash a unofficial version of Lineage 17 but still not working, the Lineage recovery mode just became rainbow colored. Then I tried to do a factory reset and flash an OOS and since then I have no more access to the recovery mode and the only thing I have when I try to access it or when I turn on the phone is the unlocked boot loader message. I can only access the fastboot mode. Sometimes when I turn it on, I also have the Qualcomm Crashdump message, but nor every time.
I read about MSM, but I'm running on mac OS... Any ideas of solutions I can try with mac terminal?
Thanks for your help

lifeisblue said:
I was running on OOS 10.3 rooted with Magisk and flashed TWRP.
I tried to install Lineage OS 16 (the last version from the official website), but after sideloading it and the superSU file in TWRP I could only reboot in the Lineage recovery mode. I tried to flash a unofficial version of Lineage 17 but still not working, the Lineage recovery mode just became rainbow colored. Then I tried to do a factory reset and flash an OOS and since then I have no more access to the recovery mode and the only thing I have when I try to access it or when I turn on the phone is the unlocked boot loader message. I can only access the fastboot mode. Sometimes when I turn it on, I also have the Qualcomm Crashdump message, but nor every time.
I read about MSM, but I'm running on mac OS... Any ideas of solutions I can try with mac terminal?
Thanks for your help
Click to expand...
Click to collapse
Fastboot ROM. It's available in the Guides Section and the Instructions are pretty straightforward. You can Google "OP6T Fastboot ROM". Also, from the looks of it, you didn't flash LOS Correctly.

lifeisblue said:
I was running on OOS 10.3 rooted with Magisk and flashed TWRP.
I tried to install Lineage OS 16 (the last version from the official website), but after sideloading it and the superSU file in TWRP I could only reboot in the Lineage recovery mode.
Click to expand...
Click to collapse
If you had TWRP why sideload LOS? Here's how I flash LOS.

Thank you very much for your advices, I managed to flash OOS back and install successfully Lineage OS 17.1 ! :good:

lifeisblue said:
Thank you very much for your advices, I managed to flash OOS back and install successfully Lineage OS 17.1 ! :good:
Click to expand...
Click to collapse
what did you do different this time to get a working LOS? Did you use the fadtboot ROM?

Hp6t said:
what did you do different this time to get a working LOS? Did you use the fadtboot ROM?
Click to expand...
Click to collapse
I fastbooted the original ROM and installed TWRP back. Then I used TWRP to install LOS from a zip file. Basically I followed OhioYJ's instructions on his comment above.

Problems with installing LineageOS 17.1

Good morrning everyone!
i am a little bit helpless with my plan to flash LineageOS 17.1 onto my OP 6T. I started from LineageOS 16, which was rooted with Magisk.
With my first attempt I followed the instructions from https://wiki.lineageos.org/devices/fajita/install. I used the latest files from 20200903 of LineageOS. But after flashing temporarily the recovery, I ended up with a stuck in oem-unlock-screen. To fix it i used the MSMtool 4.0.59.
I flashed only boot and not boot_a or boot_b. So I tried it with that now. But I only got the same results. I was unable to boot into recovery. So again MSM Tool and unlocking the bootloader.
Then I tried to install it via TWRP. OOS 9.0.13:
1. booted into fastboot mode
2. booted TWRP 3.3.1.0
3. Wiped Data and rebooted into fastboot mode
4. booted again TWRP 3.3.1.0
5. installed LineageOS lineage-17.1-20200903-nightly-fajita-signed.zip
6. installed TWRP 3.4.0
7. rebooted into recovery
8. repeated 5. and 6.
9. rebooted into recovery
10. installed open gapps-nano
11. installed Magisk 20.4
12. rebooted the system
Result: Qualcomm CrashDump Mode......
I do not understand what I did wrong. In June I installed Lineage OS on another OP 6T and it worked fine with flashing the recovery to boot_a. But I do not know which OOS was installed. No I am trying it since hours and only end up in the above mentioned results.
What do I have to do? Thanks for your help in advance!
Greetings
Thawu

My LOS Install Guide
- Don't use TWRP 3.4.x. Use 3.3.1-32 (The latest 3.3.1 version.) 3.4.x will give you issues.

Thank you lot. Lineage ist booting =)

Thawu said:
Thank you lot. Lineage ist booting =)
Click to expand...
Click to collapse
I also just noticed you are trying to use a very old version of OOS (which also means old firmware). Why are you using 9.0.13? Perhaps this could be your issue.
I need to update my guide, but 10.3.5, and the latest weekly 9-3 work fine. One warning, I never did get the 10.3.5 fastboot ROM to work on either of my 6Ts. The 10.3.4 Fastboot ROM works fine, then I had to update to 10.3.5 using TWRP.
I asked if anyone else had problems with the 10.3.5 fastboot ROM in the fastboot thread but didnt get any replies...

I started at first wit OOS 9 because of the latest (?) msm tool. I regocnized later, that it is crucial to update OOS to Android 10 what I did after I posted my question. I installed OOS 10.3.5 from oneplus.com via TWRP.
So all I had to do yesterday was to reinstall TWRP 3.3.1-32.
Your guide for installing LineageOS was by far the best I got. All the little explenations were the things I needed to understand, why the steps had to be done. So again thank you for your help and your guide which is really really good.
Greetings
Thawu

Thawu said:
I started at first wit OOS 9 because of the latest (?) msm tool. I regocnized later, that it is crucial to update OOS to Android 10 what I did after I posted my question. I installed OOS 10.3.5 from oneplus.com via TWRP.
So all I had to do yesterday was to reinstall TWRP 3.3.1-32.
Your guide for installing LineageOS was by far the best I got. All the little explenations were the things I needed to understand, why the steps had to be done. So again thank you for your help and your guide which is really really good.
Greetings
Thawu
Click to expand...
Click to collapse
Also if you like themed TWRP @acuicultor and @ morphine1e1 have a really nice creation for OP6/6t here: https://forum.xda-developers.com/on...covery-theme-blacked-twrp-acuicultor-t3847752
It's latest twrp but I've been using it for months without any issues and I flash much more than a regular user. Installed LOS twice and all good.

或许你应该先升级到安卓10 再去安装lineage os 17

Thawu said:
Good morrning everyone!
i am a little bit helpless with my plan to flash LineageOS 17.1 onto my OP 6T. I started from LineageOS 16, which was rooted with Magisk.
With my first attempt I followed the instructions from https://wiki.lineageos.org/devices/fajita/install. I used the latest files from 20200903 of LineageOS. But after flashing temporarily the recovery, I ended up with a stuck in oem-unlock-screen. To fix it i used the MSMtool 4.0.59.
I flashed only boot and not boot_a or boot_b. So I tried it with that now. But I only got the same results. I was unable to boot into recovery. So again MSM Tool and unlocking the bootloader.
Then I tried to install it via TWRP. OOS 9.0.13:
1. booted into fastboot mode
2. booted TWRP 3.3.1.0
3. Wiped Data and rebooted into fastboot mode
4. booted again TWRP 3.3.1.0
5. installed LineageOS lineage-17.1-20200903-nightly-fajita-signed.zip
6. installed TWRP 3.4.0
7. rebooted into recovery
8. repeated 5. and 6.
9. rebooted into recovery
10. installed open gapps-nano
11. installed Magisk 20.4
12. rebooted the system
Result: Qualcomm CrashDump Mode......
I do not understand what I did wrong. In June I installed Lineage OS on another OP 6T and it worked fine with flashing the recovery to boot_a. But I do not know which OOS was installed. No I am trying it since hours and only end up in the above mentioned results.
What do I have to do? Thanks for your help in advance!
Greetings
Thawu
Click to expand...
Click to collapse
I install it on HTC u11.. but voice call speaker not working and Bluetooth voice speaker not working .

Opengapps install fail A5 2016 a510f - 17.1 and 18.1

Guys. Not first time I install lineage and open gaps. Some time ago I already had lineage after original ROM on my A510f.
I wanted to update Lineage becouse something happens with system. I used TWRP, andsame system installed great but later have a problem with all opengapps (arm) instalation. Maybe not instalation because all goes OK, but after rebooting phone can not start and trying to ask for account. Nothing works. All version of OG checked on 17.1 and 18.1 and different TWRP. Have no idea what I make wrong or what happens, but still this same problem. I wiped all what was possible in TWRP and OG installed from SD. System ok, OG - not. Help.