Hi all
I have a question that has probably been asked before but i cant seem to find a definite answer.
I have a Note 3 SM-N9005 (Snapdragon 800 (MSM8974)). I would like to flash latest TWRP. I am sure i have the right TWRP (https://dl.twrp.me/hlte/)
All goes well in Odin but TWRP doesnt boot up. The phone keeps rebooting to the Samsung logo . (FYI i have previously installed latest TWRP on the S3, S4 and S5 along with custom ROMS with not a single problem)
Trying previous versions of TWRP i found the only one that works is twrp-c-hlte-4.4.img.tar, but that is too old to use to flash Android 8.1 or 9.0.
All my searching shows many instructions with a successful installation of TWRP 3.0 or greater on a Note 3. But i cant get that to happen.
Hoping that someone can help with an answer please.
Thanks in advance
Flash it by recovery and not with odin...
Hi
Sorry, Not sure what you mean
Do you mean flash TWRP by going into stock recovery and selecting applying an update from external storage (SD Card)
If so what file type do i need? img or tar?. img i presume
FYI, i am rooted and have tried the following;
*. adb fastboot. (dvice is not recognised in fastboot no matter what drivers i install)
*. Flashify
*. ROM manager
*. ODIN
All flash the latest TWRP (successfully according to the on screen message) but when trying to enter recovery i get a boot loop. Even when i try to boot to the OS, it stays in the recovery boot loop
I recover from the boot loop by re-flashing stock rom (Android 5.0, the latest from Sammobile for my device)
Thanks
turn off auto reboot while flashing twrp in odin (hlte)
Related
On my Note 1 I tried to update CWM-Recovery with the cwm app - and I never sticked to the device.
When installing and booting into recovery though cwm-app it worked once, but then on next reboot it got reverted to the old version again.
Later then I found out that on the galaxy devices the recovery can only be hard-flashed with odin or similar method, but not through the cwm-app.
BUT the cwm-app used install-recovery.sh or some other method to start the new recovery at least once after the first reboot.
Couldn't we maybe get a custom recovery running on our devices while still having knox untouched?
Just as a temporary boot I mean, but if that would work over adb for example, we wouldnt need to flash a recovery on the phone but instead boot the recovery over adb.
Anyone know more maybe? How does install-recovery.sh actually work, or how ccan it be used to boot a custom recovery?
Hello,
i'm sorry, i'm french i use google translation
I was under android 6.0 I wanted to come back to android 5.0.
So I wanted to flash a firmware that my brick my phone
My asus gets stuck on " ASUS " and will not boot I have access to the recovery
when I try to flash a ROM with stock that does not work with ADB because the firmware does not want to install , how?
Thank you for your reply and sorry if google translation is wrong
Having the same issue, after flashing a custom Android 6 rom I'm now stuck with Marshmallow.
I am not able to adb sideload stock Asus rom, but I can still flash other Android 6 rom without problem
Try this to unbrick your phone: http://forum.xda-developers.com/showpost.php?p=66894780&postcount=5
Then try this to downgrade. http://forum.xda-developers.com/zenfone-2-laser/general/guide-downgrade-zenfone-2-laser-to-t3382172
Hello and thank you for your answer
I try out your solutions yours I know you
by cons when I flash the official android 6 it makes me when my phone boot " cant read boot" and I can not find the boot image in file setting has android 6 days
Thank you and good day
I just tried the tutorials its does not work ... I'm still stuck on the Asus screen ...
if you stuck on ASUS logo screen, boot twrp once, it would solve this problem.
download stock from asus site, and flash with stock recovery.
twrp didn't support stock firmware.
hello, i have recovery official .222 no TWRP..
Hello,
I managed with the new firmware release M this morning by Asus
I was flashing with the SD card via FASTBOOT then I made the command: fastboot boot with the boot the latest version M
Thanks for your help !
I have another problem when I boot I oblige as previously said to fastboot boot boot.img if not my phone tells me error : can not loade invalid picture
I tried to do: fastboot flash boot.img successfully but this doesnt have anything you ideas ?
thank you
help !!!!!
I want to go back to stock rom
From lineage
chronology
-flash stock recovery via adb
-success
-including stock recovery is written can not mount bla2
-power off stop in asus logo
-a turn off cas in there animation batre is hardened but the position of animation batre is still innate lineage is trying isntal stock recovery berkali2 with adb via pc but can not wipe data / cache ...... can not install stock rom dll mskipun sdah flash stock recovery N boot recovery via adb but when disconnect pc n press pol + power back into TWRP ....
Hello,
I am into a TWRP boot loop.
- I can boot into TWRP
- I can update ROMs
- I can update TWRP
- I can connect to the computer and send files using mtp://[usb:001,003]/
- I can Wipe ...
But when I reboot into the system, regardless of the ROM that I use, I get again into recovery
I have read in some posts that from the TWRP command one could try to clear the first sectors of the misc partition
For instance for a Lenovo ZUK Z2 (Plus) in https://forum.xda-developers.com/showpost.php?p=72298526&postcount=14 it is said that this could help
"dd if=/dev/zero of=/dev/block/platform/soc/7464900.sdhci/by-name/misc"
but ... I cannot find the misc partition in /dev from the TWRP shell ("find /dev -name misc") !
Could someone help me with this one ? I would appreciate it a lot !
Regards
Same problem on MadOS 8.1 (MT6752)!
TWRP loop
Just flash old stock 5.1 Android ROM through Flash Tool. Its pretty easy. Then turn it, turn it off and wipe data. restart TWRP, upgrade TWRP and install new Android 8.1 and gapps. Turn the phone on and its finished. You can do recovery now for the next instalation if you want. I am doing this often because I have same problem for several months. Fortunetaly google backup works pretty fine so its not problem with installing apps again. The command you wrote above doesnt work for me.
I'm having the same problem. I was using my phone today, when it started to show wifi problems (couldn't connect); so, I rebooted it and its screen started to blink; when I rebooted it again, it automatically entered into recovery mode (TWRP). After this, the phone didn't boot normally (MadOS Android 8.1) anymore - only TWRP. Even when I try to charge it, it boots into TWRP mode instead of showing the battery animation.
In my attempts to solve the problem, I firstly reinstalled the MadOS 8.1 ROM but it kept booting into TWRP mode. So I flashed an old Android 5.1 ROM I got (connected and uploaded the device successfully with SP Flash Tools) but it also kept booting into TWRP (now an older version from the 5.1 ROM). Then I uptadated the TWRP and the OS again to MadOS 8.1 but the result was the same.
With any other alternative, I came accross this topic and tried the steps described above (practically identical to what I just did), but again I hadn't any positive results.
What else could I do?
Hello,
I have finally resolved my issue !!!
a) Using "SP_Flash_Tool_v5.1824_Win" and the "RC5_S3_16GB.zip" stock rom I flashed it using ---->>>>> "firmware upgrade" mode <<<<-------.
The option you can find it in Smart Phone Flash Tool, between the "Authentication File" and the table with the partitions.
b) Once done with the flasshing, boot the telephone into the Stock fimware
c) Boot into recovery (power + volume up) and flash the latest TWRP
d) Flash you new ROM
Do not hesitate to ask me if you have questions.
imascara said:
Hello,
I have finally resolved my issue !!!
a) Using "SP_Flash_Tool_v5.1824_Win" and the "RC5_S3_16GB.zip" stock rom I flashed it using ---->>>>> "firmware upgrade" mode <<<<-------.
The option you can find it in Smart Phone Flash Tool, between the "Authentication File" and the table with the partitions.
b) Once done with the flasshing, boot the telephone into the Stock fimware
c) Boot into recovery (power + volume up) and flash the latest TWRP
d) Flash you new ROM
Do not hesitate to ask me if you have questions.
Click to expand...
Click to collapse
Thanks! With this method, I solved the problem, identical to yours !!
I got my T580 yesterday and manged to unlock and root it.
First with the Samsung 8.1 oreo OS
Later on via TWRP I flashed Lineage OS but I didn't like it
Then used ODIN to go back to stock Samsung but I broke it
Boots in black screen but it still goes in download mode with FRP lock off
It looks like I can flash CF-Root and TWRP (success)
I can't flash a Samsung TAR anymore (failed)
But no matter what I do it won't boot or go to reovery
Tried several Samsung stock but none of them even start to download
Played with a PIT file but also no luck
There are a few unbrick guides but mine won't flash so that doesn't help me
Does anybody have a suggestion what to do now ?
Edit
Flashed TWRP again without root or Stock
Now I could go to recovery and flash LineageOS again and it boot.. Hurray !!!
Hello
Sorry for my bad english
a few months ago, i decided to flash my first custom rom (One UI rom) and it worked fine
then i was testing a lot of other roms too until i tried lineage os 20
when i flashed lineage os 20, i decided to try another rom but i was stuck on the twrp logo screen. i tried methods of fixing it but none of them worked.
after trying a method of flashing twrp once again, it failed and i got stuck in a reboot loop and could only boot into download mode. so i booted into download mode and flashed a stock rom.
everything was working fine again until i wanted to try another custom rom. At first whenever i would flash twrp, they would always fail. but later i found the cause of that and fixed it. then, flashing twrp would always pass but my device would get stuck on a reboot loop once again and i had to flash stock rom again.
i tried rooting using auto root but it would show me a verification failed error and i had to reset my device. so now im stuck on a device which cannot flash twrp, nor can it be rooted. its been 1 month and i could not find a viable solution so any help would be extremely appreciated.
You have to just reflash your fastboot rom with fastboot mode unzip it and double click on flash_all.bat file or something like that
it is a samsung, there is no fastboot mode