Database Users

Joying PX5 sleep/hibernation control?

I've looked at all the the settings under Factory Settings on my Joying PX/5 unit and can't find where the setting for length of time before sleep actually is. Saw a couple Youtube videos, but my unit doesn't have the Sleep Time delay option they show. All I'd like to do is set Sleep time for an hour or so and not have the unit boot for 30-40 seconds every time I leave the car for 5 minutes.
What am I missing here?

Which PX5? That makes a big difference
A model ending on PX5S or another PX5?

Not sure, how do I find out?
To make things worse it started actin up today, periodically shutting down, not restarting and not responding to Reset. A few times it cam up in calibration mode and did not respond to screen touch. A few times it was blank and flashing the screen and blank again after ignition. One thing after another with this unit...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

nile13mx5 said:
Not sure, how do I find out?
Click to expand...
Click to collapse
Well, you ordered it, didn't you?
So what model did you order?
But looking at the images being it a Android 8.1 on a PX5, it is almost sure a QD model ending on PX5??, where ?? is some 1 or 2-character extension.
These models only know cold boot. No 1,2,3 hours sleep delay before being switched off either.
All the other Joying models are FYT models. They always go into deep-sleep and can stay there for 25-30 days without draining your battery, but will switch off after 5-7 days just to make sure.
They always wake up within 1-3 seconds within those "deep sleep" period.

The unit came with the car I've purchased. Not sure where else to look for a model number other than the screens I've posted. Is there another place?
So, I should't hope for a boot faster than 30-40 seconds after every ignition off? It seems to vary, sometimes a little faster, sometimes a little slower, but about that long, which is pretty inconvenient. That is, if the damn unit ever works (I have my doubts after its behavior today). I've been pretty frustrated by how buggy it's been and now it seems to exhibit a hardware failure if my instincts are right. Time for something else?

Help with Raise canbus settings on Chevrolet Trax (Europe)

Hello everybody from Italy,
Can you please help me with this issue? I've just purchased an Android 10 AllWinner head unit, had it installed but the original rear camera, parking sensors, beeps, etc are no longer working. Before everything was great on the original MyLink.
I've attached pictures so that you can have a look.
A Raise canbus was sent together with the car radio but even if it is set to CHEVROLET TRAX, it is not working.
Anybody knows how to help for this GM car? THANKS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

the sad fact about getting a aftermarket unit that's not specifically made for your vehicle is that you won't be able to get any of those things working especially if they communicate through proprietary connectors and communication methods. You might be able to get the camera working through some special wiring and wiring diagrams. Other than that I doubt you will be able to get the ultrasonic parking sensors working with a basic aftermarket unit by itself.
And on another note if you had somebody install it other than yourself it will be even more difficult getting it to work. Being that you have no knowledge of what's going on behind your dash right now
Sent from my SM-N960U using Tapatalk

antonelloairport said:
Hello everybody from Italy,
Can you please help me with this issue? I've just purchased an Android 10 AllWinner head unit, had it installed but the original rear camera, parking sensors, beeps, etc are no longer working. Before everything was great on the original MyLink.
I've attached pictures so that you can have a look.
A Raise canbus was sent together with the car radio but even if it is set to CHEVROLET TRAX, it is not working.
Anybody knows how to help for this GM car? THANKS
Click to expand...
Click to collapse
Hi,
My android head unit has no option for GE - Trax.
I set the can bus to GE - Aveo. I use Raise can bus.
I mis plugged the connector on head unit side upside down, but after fixing it works fine.

Suggestions on new aftermarket stereos (Skoda octavia mk2)

Hello! I own a Skoda Octavia mk2 2008/2009 and I would like to upgrade the stereos in it. Current ones do not include bluetooth, but thats something I would love to have in it. I have thought about android stereos and something else, but seems like android would fit best? What do you think? It should work with all dashboard buttons the default stereo also works with. I have seen multiple different chinese brands in aliexpress, but I'm not sure which has the best sound quality.
My current stereo:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now to the real question:
What stereo would you suggest for ~150-200€ budget WITH bluetooth? Would be awesome if you also knew that it would 100% fit.
Thank you!

Hi, i bought this from European site for 85$:
https://www.aliexpress.com/item/4000046636557.html?spm=a2g0s.12269583.0.0.4c041ae9COaKGp
I was quite surprised, it works quite fast, it is just sleeping (not turned) but does not draw much power when off (just like sleeping tablet).
Wheel buttons work, radio has strong signal. This version has only 1gb of ram, it is enough for preinstalled software but fe waze or spotify is a little slow.
Preinstalled Sygic works great but does not provide traffic info.
Beware different frame size as seen in picture, i bought used but if you are not as lucky, new costs around 1000CZK.
I also installed this launcher:
https://play.google.com/store/apps/details?id=altergames.carlauncher&hl=cs
I am sure you can find even more satisfying radio for 150+ USD, there are some models with 4GB ram and Android 10.

Is there any models you suggest for 150+ USD? I can't really find any.. :c

Hard to suggest something i am not familiar with, try to look here:
https://www.aliexpress.com/wholesal...&minPrice=120&maxPrice=200&page=1&groupsort=1

Take a look at this:
https://www.erisin.com/erisin-es272...b-carplay-for-skoda-superb-octavia-p0542.html
I have a unit for Mercedes and I'm very satisfied.

I bought mine from Pumpkin and its ok.
Make sure to buy a unit which will be delivered with an can-bus adapter for Skoda|VW!
As your car is a before-facelift model, be aware that not everything will work (parking distance, changing climate).
Also keep an eye on the battery, because on this building year the new radio can drain the battery empty.

Audi TT mk2 px6 head unit - the sound goes off randomly with carplay

Dear All,
On my HU the sound randomly goes off and I get the message in the attached picture.
Is a reboot the only solution?
How can this be solved? How can I turn this wake up function off, I have tried everything.
Nevertheless voice assist is not functioning, neither Siri nor androud auto, but I can live without it.
Thanks for your help!
PX6
MTCHE_CHS_V3.67_1
andorid 10
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

nemethsamu said:
Dear All,
On my HU the sound randomly goes off and I get the message in the attached picture.
Is a reboot the only solution?
How can this be solved? How can I turn this wake up function off, I have tried everything.
Nevertheless voice assist is not functioning, neither Siri nor androud auto, but I can live without it.
Thanks for your help!
PX6
MTCHE_CHS_V3.67_1
andorid 10
View attachment 5695711
Click to expand...
Click to collapse
Sorry to say... but: Just use the head unit as it is expected.
There is no need to mirror anything, so voice recognition would not fight in there. Use Google navigation on your head unit as expected, instead of any mirroring.
I really don´t understand why someone uses mirroring on these units....
Issue is in the settings on your phone, not on the head unit.

rigattoni said:
Sorry to say... but: Just use the head unit as it is expected.
There is no need to mirror anything, so voice recognition would not fight in there. Use Google navigation on your head unit as expected, instead of any mirroring.
I really don´t understand why someone uses mirroring on these units....
Issue is in the settings on your phone, not on the head unit.
Click to expand...
Click to collapse
I am currently using it with shared internet, but it is terribly unstable. It freezes the ipod app, chrome crashes all the time, phone calls are often completely silent and so I have reset the HU.
So mirroring is still much more manageable than the factory software environment of the head unit.
I might try the Hal9k package.

nemethsamu said:
I am currently using it with shared internet, but it is terribly unstable. It freezes the ipod app, chrome crashes all the time, phone calls are often completely silent and so I have reset the HU.
So mirroring is still much more manageable than the factory software environment of the head unit.
I might try the Hal9k package.
Click to expand...
Click to collapse
First of all, I would ask the seller for the latest firmware and MCU.
You need to have something as fall back solution, if Hal9k goes wrong.
Be patient to use Hal9k... it is not always the final solution to use it.

SPRD Head Unit Problems

Hi....Attached picture shows what I have and the problem I am having is that it will about 30% of the time come on without sound and turning car off and back on will have sound and everything will work fine until I turn it off again. Car is a 2001 LS430 and have tried all canbus settings within the factory settings for the type canbus I have. I have tried sleep and non sleep modes, reboot the unit while car is on, reset while car is on, change canbus settings while car is on and nothing will bring the sound back until I turn car off and back on. The unit comes on to a different screen everytime and is not consistant in what it does. The radio in unit may play then switches to car tuner and then afterwards sound may cut off and this may happen also with the car turner coming on first. I have changed the car launcher with agama and sometimes the sound will play fine and when hit home button agama starts up and other times it is already there which it is supposed to be. It is very eratic how this unit boots up or comes out of sleep. Once on everything works fine including AC controls but did notice when messed up the AC controls still will work on app but not light up if turn fan up high etc. You would think the home launcher would be the first thing to dictate what happens but for this unit it is down the line. I have since put a switch in the ACC line to use so I don't have to cut car off. Has anyone else here experienced this. Is there a way to go into settings somewhere and dictate the sequence. I can get into factory settings with password but do not know the developer options password. Thanks and hope someone here can help with this strange problem. Like I said when it comes on it is random what I see on screen when it does and doesn't work.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

What is head unit. Post Android system information including MCU version.

Thanks for trying to help

This might be in the wrong thread...is this an FYT unit and if not where should I post...thanks

alextv75 said:
This might be in the wrong thread...is this an FYT unit and if not where should I post...thanks
Click to expand...
Click to collapse
I don't think this a FYT unit. Please run the HWGetInfo apk from my signature. That's the simplest way to tell whether it is a FYT.

Thanks...I did that and it is not an FYT unit...Where should I post this question...thanks

I have requested the Moderators to move this thread to the general Android Head unit forum

Hi,
I want to Root sprd uis8581 device. Thanks to my friends who will help.

LifeBoard said:
Hi,
I want to Root sprd uis8581 device. Thanks to my friends who will help.
Click to expand...
Click to collapse
It's good to know you found the forum and read through to find the information you needed to root the head unit. Bravo!