Hello,
I have a big problem. I don't know what to do.
I wanted to make a clean install of OxygenOS 4.5.8 and so i downloaded it, did it on SD card together with Magisk and no_verity_op5.zip (because i read that this decrypt the data).
So i cleand data and installed no_verity_op5.zip via TWRP, but when i wanted to reboot it takes way to long (i waited 30minutes but it stays on boot circle)
After that i booted into TWRP and decided to made a factory reset and to install OxygonOS 4.5.8 in a clean version. But it was not possible anymore!
When i want to install the .zip it says Patching system image unconditionally... and it loads. after the blue is full it says:
writing static_nvbk image...
patching firmware images...
script succeeded: result was [1.000000]
And when i want to boot into system it says no OS installed.
I tried also to flash this rom or even any other custom rom through ADB Sideload but it does not work. Same like above..
What can i do? I do not know what to do
I hope my phone is not bricked.
Thank you for any suggestion.
Go to oneplus 5 official download page, download stock recovery and latest stock firmware and follow instructions on the download page.... But first with TWRP take a backup of all your data because restoring stock firmware will ERASE everything... Don't panic it will works
First off, don't panic! you're not bricked as long as you can reach your bootloader and recovery.
This happened to me as well and luckily the fix is easy!
You probably tried to flash the OxygenOS build from the Oneplus downloads right?
Somehow these won't flash properly through TWRP and you must therefore also flash the Oxygen recovery image listed in the downloads.
Here are some steps that'll fix your problem.
1 - Backup all of your private data from internal storage because flashing OxygenOS will WIPE/ENCRYPT all data on your device.
2 - Go to the Oneplus download center and download both the latest OxygenOS and it's appropriate recovery:
http://downloads.oneplus.net/oneplus-5/oneplus_5_oxygenos_4.5.8
3 - Boot into your bootloader and flash the stock recovery you just downloaded. (fastboot flash recovery <recovery>.img)
4 - Boot into the Oxygen recovery and flash OxygenOS.
This should get you up and running again.
Once you get tired of OxygenOS simply reboot back into your bootloader and flash TWRP and any rom of your liking.
In the future if you want to flash OxygenOS from TWRP you have to grab a build from XDA I guess. I'm not entirely sure why flashing from within TWRP won't work with stock OOS but I believe it expects to be flashed from withing the stock recovery.
I'm pretty confident this will solve your problems.
Please backup your data first though, don't want anything to get messed up in there!
Good luck!
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
manuelbvb said:
Ok thank you.
i will try it.
So you are right, i tried to install OxygenOS with TWRP.
So is it not possible to have official OxygenOS with TWRP, Magisk and Root?
So i cannot backup OxygenOS with TWRP?
Click to expand...
Click to collapse
It is possible to have both OxygenOS and TWRP for sure!
Only a clean flash from a non-encrypted state in TWRP seems to break stuff. You can use a modified OOS build from the forums.
TWRP can indeed backup your OOS install so that shouldn't be a problem.
The only exception seems to be flashing a clean install of OxygenOS (from Oneplus Download center) through TWRP.
Other than that everything works as expected.
Ok thank you.
So i will follow you instructions and i hope it will work.
And i think so.
And after it i will install TWRP again (because i need the backup tool), i will install magisk. will this work?
So i can use everything as in a custom rom, but cannot make a clean install? So official Oneplus OTA will work with TWRP or not?
Thank you soooo much!
Also, Magisk/root works just fine on OxygenOS.
Once you flashed OOS from the stock recovery and have everything set up simply boot into your bootloader and flash TWRP.
From there you flash Magisk and everything should be fine.
OTA's from Oneplus also install fine through TWRP as long as you go into Magisk and uninstall 'root' first. When OxygenOS tells you there's an update simply remove Magisk as I said above and it'll update fine.
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
manuelbvb said:
Ok thank you!
It worked!!!!! I am very happy!
So i will now install TWRP, and then magisk (newest version).
I have a question, because the last time i installed magisk it did not fully work.
If i install it i have root or? But how can i get saftynet in magisk?
Click to expand...
Click to collapse
First off! YAY!! glad it worked out!
Be sure to use the TWRP build from the twrp.me website. The one listed on these forums are 'unofficial'. Not saying those are bad, but the official one has a pretty impressive track-record.
After flashing Magisk you are root-enabled so yeah, congrats you are now root! In order to pass safetynet you must enable 'magisk hide' in the magisk manager (the app that should now be installed on your phone).
If you do not have an app called 'magisk manager' then you can download this app from the magisk forums. It should however install itself while flashing the Magisk zip. So assuming you have it installed find the 'magisk hide' service and enable it.
From my experience you sometimes need to reboot in order for it to pass safetynet check.
Glad it all worked out for you!
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
manuelbvb said:
Everything worked!
Now i have OxygenOS 4.5.8 (with OTAs in future), magisk + root + saftynet and i can install something throug TWRP and backup.
SO PERFEKT.
You are a hero
Click to expand...
Click to collapse
That's great to hear!
Enjoy and take care!
no os
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
xda___ said:
sideloaded zip for rom in twrp, says successful but then no os installed and I can't find the zip anywhere in twrp. help :]
Click to expand...
Click to collapse
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Zocker1304 said:
Can't you just connect your phone to your PC and use MTP for the file transfer? Make sure to have MTP disabled under TWRP-> Mount -> Enable MTP
Click to expand...
Click to collapse
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
xda___ said:
I tried, windows recognizes my phone, but when I try to transfer files it it says device is not available or has been disconnected (something like that...)
Click to expand...
Click to collapse
Well just flash a different twrp via fastboot flash recovery *path to file*
I have fullmics rom (not sure if that matters) with Magisk installed.
Magisk needs updating, but I just can't figure out how to do it and feel like an idiot now.
In Magisk manager, I press install, go through the confirmation dialogue and then choose "patch boot image file" (I've already downloaded the zip).
I then need to choose a file from that zip to patch the boot image, but I don't have a clue which one to choose. I've tried a few that I guessed could work but no luck and the update process is not self explanatory unfortunately....
The strange thing is that the Magisk manager now also says that Magisk is not installed an the phone is not rooted. Did this break because of the failed update, or is the update failing because I somehow lost root? How can I get Magisk back on my phone, it was part of the installation process with fullmics. Should I dirty flash fullmics again to get magisk reinstalled?
I ended up making a back up in twrp as a precaution before moving on to re-flashing magisk. Strangely enough after rebooting (but before re-flashing magisk) magisk was fine again and also had root back.
No idea what had broken but obviously a simple reboot fixed it.
I was waiting for a root enabler for oreo (41.3.A.2.24), and I could find https://forum.xda-developers.com/xperia-x-performance/how-to/guide-stock-kernel-root-twrp-drm-fix-41-t3711837.
But this link is for version 41.3.A.0.401 and it does not work for everybody including me.
Since androplus still didn't bring out a new version of his kernel I tried the method from the above link.
But I'm using newer versions than in the description, I use TWRP 3.2.0, Magisk manager 5.2.2 and Magisk 15.2.
I can install the new version, twrp, the new boor image and Magisk 15.2.
I can boot and Magisk runs but the Safetynet control failes and Magisk does not enable root.
On the installation of the boot image, twrp and magisk I got some messages (marked in red)
unable to mount storage
failed to mount
Before I tried with magisk manager 5.5.1 and magisk 15.1 but then I got stuck at boot time at the sony logo.
Does anybody have a way to root Oreo (the latest version), enable DRM and enable root?
Ok I started all over again and I noticed I didn't follow the procedure first time.
So I excluded the FOTA kernel but whatever else I check no full wipe is done, I can always see the previous installed apps, it does not matter if I check Cust-reset, master-reset or reset-wipe-reason, the system is not wiped.
So that's my first problem, how to wipe the previous install.
Flashing the rom seems to be OK, same thing for flashing boot_oreo.img and twrp-3.1.1-0-dora.img.
I'm not sure about twrp 3.2.0.0 because this version is off-line now, so I tried with TWRP 3.1.1.0 and 3.2.1.0 but they all gave me the same result.
Problems start when I have to flash drmfix.zip, safety-net cleaner or magisk 15.2. The procedure tells me the flash is ok but have a look at thet attached images, I get errors while flashing. One picture for drmfix, one for safety-net-cleaner and one for magisk 15.2
After flashing all of this I can boot successfully but when I try to get root in ES File Explorer pro, it does not work. When I go into Magisk and try the afety-net check I get ctsProfile false and basicIntegrity False.
So the rom does work but I do not get root.
I tried all of this with the Italian rom 41.3.A.2.24.R1E ? I can start all over again with the UK version 41.3.A.2.24.R2E but I do not know if this makes any sense.
So can anybody tell me what to do to get it all going?
deboopi2 said:
I was waiting for a root enabler for oreo (41.3.A.2.24), and...
Click to expand...
Click to collapse
1 - Do use always Adrian DC latest fully working TWRP build for dora.
2 - You don't need a 3rd party kernel to achieve that, instead, you can easily create your own one, based always on stock kernel!
Thats the SELinux's problem.
Flash this first then flash magisk
https://forum.xda-developers.com/xp...ment/mod-sony-stock-patcher-xperia-x-t3528148
Sorry I had a problem. When I use LineageOS builtin updater app to update system. When system first reboot. I can't boot system. Auto boot in bootloader. Then I use adb to cutover partition A. I can start system, but still old version. And I haven't root or install Magisk, I don't know why.
BTW, I try to use sideload to update, still in old version.
Flash it again. I have been using LOS 18.1 and updates are getting installed seamlessly.
I hope you have flashed LOS recovery
Hi - I have a rooted OP6T on OOS 11.1.1.1.
I want to upgrade to OOS 11.1.2.2, but I am trying to keep root. Installing TWP would be nice, but not mandatory. I definitely don't want to lose my configuration / data during the upgrade.
Can I do it?
I have upgraded my OP 7 Pro to OOS 11 using Payload Dumper and a Magisk patched boot.bin file. Is the process the same with the OP6T?
Thanks!
@¿GotJazz?
Hello,
yes you can,
this is what i done at every update...
Disable all the Magisk modules
and the securities (fingerprints/pin, etc)
Let the OTA comes and install itself.
Do NOT reboot, instead open the Magisk
manager and via internal modules flasher
install the TWRP .zip, (i'm using 3.5.2_9-0,
but there are newer ones).
Do NOT reboot.
Open Magisk again and select install,
then install to inactive slot (after OTA).
When that's done you can reboot your phone
with lastest firmware, TWRP, root and untouched data.
Configure your securities and reinstall your modules.
Cheers
@¿GotJazz?
I saw that you also posted in other threads
with slight variations and the bootloop slot issue.
Well, if I were you I would not risk it
and I would proceed first with a backup
of the important stuff, then
I would use MSM tool with rollback
to the android 10 version, re-root it
via Payload Dumper or using a pre-patched image
and upgrade to android 11 with the method
I have already told you.
Let the community know how it went and
good luck.