I am looking to root my head unit Toyota Verso 2013
android 8.1.0
Processor-type Octa-sp9853i
MCU-Version Ts9.4.3.167-30-C03181-190422
CAN-Version v3.28.010BYPS
System-Version V.11.1.1.20190610.153530_CLC1
I bought from aliexpres (Ullgo Shop)
4 GB RAM / 64 GB
hello there. have the same head unit.
could you please tell one thing - are "car settings" app is working on your device? I mean door locking, etc.
LazyGatto said:
hello there. have the same head unit.
could you please tell one thing - are "car settings" app is working on your device? I mean door locking, etc.
Click to expand...
Click to collapse
couple of things works for a short time and goes away for example ventilation display on screen, door opening display on screen
Steering wheel button not 100 percent correct
Here you have gentlemans.
Ullgo=Allwinner=Ownice 960 k6=TEYES=Topway, all with SC9853i processor.
Dispatch, put on usb stick only the files without folder, plug to the radio, go to update firmware function and let the radio to work.
After the automatic restart, install Magisk Manager and Root Explorer, give permission to Root Explorer from inside Magisk Manager and it's DONE.
I have this ULLGO (10", 4gb RAM, SC9853i):
MCU VERSION Ts9.4.3-24-84-94C681-191021
SYSTEM VERSION V11.1.1_20200304.092444_AKW2-X
ANDROID 9
I taked the files from a VIETNAM seller for Ownice C960 k6 and in 2 minutes I make the root.
All the bests.
Hi,
I'm having some problems with this HU. The first one is that the APP PowerAMP installed, when I turn the car off (HU turned on in position) the music of the APP is not recorded, HU's Android closes the APP and the last song does not play. The second problem is that the startup of the HU is very slow, I would like some tip on how to improve this.
In the APP PowerAmp forum there is a possible solution, which I will post below:
"you don't need to change any code - just enter the intent (often looking like cn.nihao.action.SHUTDOWN instead of android.intent.action.SHUTDOWN) into" Shutdown intent "Poweramp option. Usually can be googled by" shutdown intent YOUR HEADUNIT NAME ".
Poweramp supports like 5-6 of these, but it looks like each headunit model / firmware (again for unknown reason) changes the intent name, so this is why Shutdown Intent option is there. " link : https://forum.powerampapp.com/topic/20947-aktivation-issue-on-headunit-with-v3-893/page/2/
Could anyone tell me what is the Shutdown intent of this HU model?
I attached images for a better understanding.
Thank you very much in advance.
i have a android head unit , but it not booting.. please send me a link to download to android firmware for it..
My device is a T3L with 1GB Ram and 16GB of Internal memory,
MCU version:
T3L.3.19.-296-10-A49311-210105 (MM030)
System:
V8.1.1_20210430.162039_THEME1
Android Version: 11
i have a android head unit , but it not booting.. please send me a link to download to android firmware for it..
My device is a T3L with 1GB Ram and 16GB of Internal memory,
MCU version:
T3L.3.19.-296-10-A49311-210105 (MM030)
System:
V8.1.1_20210430.162039_THEME1
Android Version: 11
Hello,
It happened to me when I updated my system, after system updating my air conditioner app stop working my head unit system is Quad core T3 p1 android 9, I solved the problem, and I would like to share the solution if someone facing same problem.
The solution is to go to settings, car settings, extra settings ( password 123456 ) then select car model or something related to model, then you will be getting into car selecting menu ( pic is attached for reference ).
Please be careful when choosing the car model, it should be exactly the same as yours.after that you will get an APK downloading, also MCU update, system will be restarted automatically after the update is complete, done
notice: your head unit should be connected to WiFi for the MCU updating process.
Regards,,
Hi everyone!
i need some help because the seller refuses to help and acts like he doesn't understand english. I am a car audio installer and the 4 radio is no longer working well. memory forgets radio settings when acc is connected, after 2 minutes, good for 1-2 days, dsp sound quality is pathetic and painful, only radio sound quality is good, usb, youtube, spotyfi, itunes, video and all other crap it says, no subwoofer setting and control option, developer mode cannot be entered via build number, device customization is not possible, menu access is limited, neither system nor mcu can be updated, many settings cannot be done. there is only a problem with the installation of the uis7862 processor!
Android 12
mcu: QF01.V01: 45: 20220818.011021
System: QF001.2022.08.18.225855
DSP: BD37534
Radio: TSC4745
Processor: 1.8 GHz x 8 - UIS7862A
Device Name: K706
Software version: ums512_q0_20211130
Hardware: QF001
Honestly, cut losses and replace with an FYT UIS7862 variant.
marchnz said:
Őszintén szólva, csökkentse a veszteségeket, és cserélje ki egy FYT UIS7862 változatra.
Click to expand...
Click to collapse
Thank you, What does FYT stand for? Unfortunately, I don't speak English, only google is my friend as a translator. What do you mean by exchange?
Mtxaudio said:
Thank you, What does FYT stand for? Unfortunately, I don't speak English, only google is my friend as a translator. What do you mean by exchange?
Click to expand...
Click to collapse
He said that you should buy a new one.
Today I received the UIS7860A update File a System and MCU from the manufacturer! The BD37534 DSP also works well and a lot of innovations and useful functions have been added.
Mtxaudio said:
Today I received the UIS7860A update File a System and MCU from the manufacturer! The BD37534 DSP also works well and a lot of innovations and useful functions have been added.
Click to expand...
Click to collapse
Same hardware here and same issues with sound quality.
Would you please share this update?
Thank you!
Mtxaudio said:
Today I received the UIS7860A update File a System and MCU from the manufacturer! The BD37534 DSP also works well and a lot of innovations and useful functions have been added.
Click to expand...
Click to collapse
Share it here for the benefit of XDA
1.Download the two firmware in your computer, they are <update.zip> and <MCU.bin> , please do not unzip them.
2.Copy the <update.zip> document into your Udisk root path. And copy the <MCU> document into your Udisk root path.
3.Connect your Udisk to our player, and then follow settings-general-system upgrade, and then it will upgrade itself, please do not cut the power during the upgrade. And the player will reboot itself. This step will take about 6 minutes.
4.When you finish upgrading the system, then follow settings-General-MCU Upgrade- select the upgrade file -Confirm, and it will upgrade itself. This step will take about 1 minute.
5.After upgrade all, we also need to activate the weather APK, please set your cellphone WiFi hotspot name as FYQP5QRG, and connect the player WiFi to your cellphone hotspot, and then it will activate the weather APK. When you are using an iPhone, please do not connect your iPhone Bluetooth to our player before you activate the weather APK, it is very important. After you activate the weather APK, you can connect your iPhone Bluetooth normally.
6.The MCU upgrade may lead to the touch screen and touch panel not working correctly, please use your five fingers to long touch the screen and go to calibration mode to adjust the touch screen. And about the touch panel please follow the steps settings-factory-8888-ok-touch learning button, in this way you can set it correctly.
7.After the upgrade, you need to set the correct CANBUS type if your car has CANBUS system ,please follow the steps settings-factory-8888 ok-car model
8.The firmware upgrade may lead to the Carletter APK not activated, please take the picture of QR code and send to us, we will activate it for you.
https://jitufirmware1128.oss-eu-central-1.aliyuncs.com/update.zip
https://jitu375344745mcu1126.oss-eu-central-1.aliyuncs.com/mcu.bin
Mtxaudio said:
1.Download the two firmware in your computer, they are <update.zip> and <MCU.bin> , please do not unzip them.
2.Copy the <update.zip> document into your Udisk root path. And copy the <MCU> document into your Udisk root path.
3.Connect your Udisk to our player, and then follow settings-general-system upgrade, and then it will upgrade itself, please do not cut the power during the upgrade. And the player will reboot itself. This step will take about 6 minutes.
4.When you finish upgrading the system, then follow settings-General-MCU Upgrade- select the upgrade file -Confirm, and it will upgrade itself. This step will take about 1 minute.
5.After upgrade all, we also need to activate the weather APK, please set your cellphone WiFi hotspot name as FYQP5QRG, and connect the player WiFi to your cellphone hotspot, and then it will activate the weather APK. When you are using an iPhone, please do not connect your iPhone Bluetooth to our player before you activate the weather APK, it is very important. After you activate the weather APK, you can connect your iPhone Bluetooth normally.
6.The MCU upgrade may lead to the touch screen and touch panel not working correctly, please use your five fingers to long touch the screen and go to calibration mode to adjust the touch screen. And about the touch panel please follow the steps settings-factory-8888-ok-touch learning button, in this way you can set it correctly.
7.After the upgrade, you need to set the correct CANBUS type if your car has CANBUS system ,please follow the steps settings-factory-8888 ok-car model
8.The firmware upgrade may lead to the Carletter APK not activated, please take the picture of QR code and send to us, we will activate it for you.
https://jitufirmware1128.oss-eu-central-1.aliyuncs.com/update.zip
https://jitu375344745mcu1126.oss-eu-central-1.aliyuncs.com/mcu.bin
Click to expand...
Click to collapse
worked! Thank you.
@ffontana @Mtxaudio just installed S1 ( 3GB/32GB ) version and having the same issues, seems my FW is even older than you had originally, would you know if my radio can be updated with your firmware above?
Android 12
mcu: QF01.V01: 45: 20220818.011021
System: QF001.20220817.221459
DSP: BD37534
Radio: TSC4745
Processor: 1.8 GHz x 8 - UIS7862A
Device Name: K706
Software version: ums512_q0_20211130
Build number: QF001.20220817.221459
Hardware: QF001
DDR: 3GB
FLASH: 32GB
got an January 2023 update from dealer on Alibaba, update went OK, radio is working, will see if it helped my problems
firmware: https://jitufirmware20230109.oss-eu-central-1.aliyuncs.com/update.zip
MCU: https://jitu375344745mcu20230103.oss-eu-central-1.aliyuncs.com/mcu.bin
1. download these two files. copy <Update.zip> and <MCU.bin> to the root directory of a formatted USB drive(FAT-32).
2. plug the U-disk into the unit. enter Settings-General-System Upgrade. the system upgrade will start automatically. the step takes about 6 minutes, please do not cut the power off during the process.
3. after upgrading the system, enter Settings-General-MCU Upgrade- select the upgrade file -Confirm to do MCU upgrade. the step takes about 1 minute.
vendo232 said:
[USER = 3060553] @ffontana [/ USER] [USER = 8250520] @Mtxaudio [/ USER] éppen telepítette az S1 (3 GB / 32 GB) verziót, és ugyanazokkal a problémákkal tűnik, hogy az FW még régebbi, mint eredetileg volt, tudod, hogy a rádióm frissíthető-e a fenti firmmal?
Android 12
mcu: QF01.V01: 45: 20220818.011021
Rendszer: QF001.20220817.221459
DSP: BD37534
Rádió: TSC4745
Processzor: 1,8 GHz x 8 - UIS7862A
Eszköz neve: K706
Szoftver verzió: ums512_q0_20211130
Építési szám: QF001.20220817.221459
Hardver: QF001
DDR: 3 GB
VILÁG: 32 GB
Click to expand...
Click to collapse
You can update it as described.
Mtxaudio said:
You can update it as described.
Click to expand...
Click to collapse
Hi, I also have the same problem, the seller has provided me with an update but it has created audio problems and problems with some applications. How can I fix it?
Versione del sistema: QF001.20220827.145315
Versione MCU: QF01.V01.47.20220830.001131
Android: 12
DPI: 1280 x 720
DSP: BU32107
Radio: TSC4745
Bluetooth: 5.0
UUID: 1002204081000536
vendo232 said:
got an January 2023 update from dealer on Alibaba, update went OK, radio is working, will see if it helped my problems
firmware: https://jitufirmware20230109.oss-eu-central-1.aliyuncs.com/update.zip
MCU: https://jitu375344745mcu20230103.oss-eu-central-1.aliyuncs.com/mcu.bin
1. download these two files. copy <Update.zip> and <MCU.bin> to the root directory of a formatted USB drive(FAT-32).
2. plug the U-disk into the unit. enter Settings-General-System Upgrade. the system upgrade will start automatically. the step takes about 6 minutes, please do not cut the power off during the process.
3. after upgrading the system, enter Settings-General-MCU Upgrade- select the upgrade file -Confirm to do MCU upgrade. the step takes about 1 minute.
Click to expand...
Click to collapse
hi the link doesn't work, can you send a working one?
hello everyone I have a problem with my s3 car radio, I updated with the firmware that the seller gave me, it only solved the memory problem etc., but now I have audio problems and problems with some applications.
firmware: https://jitufirmwarezlink20230306.oss-eu-central-1.aliyuncs.com/update.zip
MCU: https://jitu321074745mcu230207.oss-eu-central-1.aliyuncs.com/mcu.bin
this is the update i have installed, are there any other fixes?
Scofi003 said:
hello everyone I have a problem with my s3 car radio, I updated with the firmware that the seller gave me, it only solved the memory problem etc., but now I have audio problems and problems with some applications.
firmware: https://jitufirmwarezlink20230306.oss-eu-central-1.aliyuncs.com/update.zip
MCU: https://jitu321074745mcu230207.oss-eu-central-1.aliyuncs.com/mcu.bin
this is the update i have installed, are there any other fixes?
Click to expand...
Click to collapse
What kind of audio problems you have? Please elaborate and share details of your radio Hardware and Software revision after the update.
vendo232 said:
What kind of audio problems you have? Please elaborate and share details of your radio Hardware and Software revision after the update.
Click to expand...
Click to collapse
before this update the audio, was working fine nn grainy, the update is what i posted.
vendo232 said:
What kind of audio problems you have? Please elaborate and share details of your radio Hardware and Software revision after the update.
Click to expand...
Click to collapse
the weather application doesn't work after this update, the audio is degraded.
Scofi003 said:
the weather application doesn't work after this update, the audio is degraded.
Click to expand...
Click to collapse
I had the problem with audio as you explain and it got resolved in Jan. Update. If you flashed March update the problem should be resolved. Please list your HW/SW versions.
Android 12
mcu: QF01.V01.70.20221216.011021
System: QF001.20230109.190922_v3.08_01
DSP: BD37534
Radio: TSC4745
Processor: 1.8 GHz x 8 - UIS7862A
Device Name: K706
Software version: ums512_q0_20211130
Build number: QF001.20230109.190922
Hardware: QF001
DDR: 3GB
FLASH: 32GB
Where can I find the March update to fix it?