Database Users

TWRP wipes after flashing AOSP 9 Pie

Hello everyone I have recently flashed AOSP pie 9 ROM but after that my TWRP recovery gets wipe and stock recovery gets installed and after reflashing TWRP I can't flash magisk and get root access.
Edit: Issue solved. The solution with Magisk not appearing even after clean flashed on AOSP 9:
Step1: Flash TWRP with Tissot manager: https://forum.xda-developers.com/mi-a1/development/treble-twrp-installer-treble-manager-t3793637 "Download" Note: You can leave Treble stuff and just flash TWRP
Step2: Goto Advanced and select Tissot Manager "Run"
After that flash magisk.
Note: It will also work on temporary TWRP but the with the @CosmicDan TWRP, it will get installed to both slot kernels so you don't need to hassle on selecting/changing slot.
Thank You!

Athakuri700 said:
Hello everyone I have recently flashed AOSP pie 9 ROM but after that my TWRP recovery gets wipe and stock recovery gets installed and because of that I can't flash magisk and get root access.
Click to expand...
Click to collapse
Ask in the AOSP 9 Thread!!! Don't create one?
And just flash TWRP again. Not hard to think of.

justboryata said:
Ask in the AOSP 9 Thread!!! Don't create one?
And just flash TWRP again. Not hard to think of.
Click to expand...
Click to collapse
Mistake, thanks

Solti le purai Naya banai dexa qn sodhna lai?

5anzay said:
Solti le purai Naya banai dexa qn sodhna lai?
Click to expand...
Click to collapse
More experienced than you. ? Junior. I have mentioned earlier it was a mistake and it got posted in both thread. Now if you know or not about deleting?????

Athakuri700 said:
More experienced than you. ? Junior. I have mentioned earlier it was a mistake and it got posted in both thread. Now if you know or not about deleting?????
Click to expand...
Click to collapse
Have you flashed the TWRP installer after the ROM, like on every other ROM for our A/B device with no dedicated recovery partition?

Haxomen said:
Have you flashed the TWRP installer after the ROM, like on every other ROM for our A/B device with no dedicated recovery partition?
Click to expand...
Click to collapse
The issue has been fixed ? I just forgot to switch A/B partition. Feeling fool on myself ? anyway thanks.

Athakuri700 said:
The issue has been fixed ? I just forgot to switch A/B partition. Feeling fool on myself ? anyway thanks.
Click to expand...
Click to collapse
You dont need to switch partitions, you just need to flash the twrp installer after the ROM

Haxomen said:
You dont need to switch partitions, you just need to flash the twrp installer after the ROM
Click to expand...
Click to collapse
I had no issue on installing TWRP, I was stuck on Magisk as it was not appearing even after neat flash.

Athakuri700 said:
I had no issue on installing TWRP, I was stuck on Magisk as it was not appearing even after neat flash.
Click to expand...
Click to collapse
Me too, just installed the magisk manager apk

How to Root A2017G oreo?

Hi
How can i Root the A2017G oreo a2017gv1.3.0b02 ?
when i install TWRP the phone will formatted?
i have unlock the bootloader.

Just install Magisk 16.7 (even though I hate suggesting to use that software). Do not try to use 17.x or higher until you have followed the steps in this topic:
https://forum.xda-developers.com/axon-7/development/kernel-magisk-17-stock-roms-t3856809
Unfortunately, the 2 other major root solutions out there, SuperSU and Phh's Superuser, don't appear to work with stock Oreo on the Axon 7. I tried both and got bootloops.
Edit: Sorry about that link, it seems to require B20 Oreo, which is for the A2017U. But you have B02 Oreo for the A2017G. The solution in that thread may or may not work for you, I would post there first to ask. Or just try it and see.

m-powergr said:
Hi
How can i Root the A2017G oreo a2017gv1.3.0b02 ?
when i install TWRP the phone will formatted?
i have unlock the bootloader.
Click to expand...
Click to collapse
hey how did you unlock the bootloader?

kay07- said:
hey how did you unlock the bootloader?
Click to expand...
Click to collapse
You just need to flash TWRP, and install Magisk from TRWRP aswell.

TerrorToetje said:
You just need to flash TWRP, and install Magisk from TRWRP aswell.
Click to expand...
Click to collapse
How to do that? Can you explain step by step process. I'm on stock oreo 2017g

Any update on this topic?

TerrorToetje said:
You just need to flash TWRP, and install Magisk from TRWRP aswell.
Click to expand...
Click to collapse
kay07- said:
How to do that? Can you explain step by step process. I'm on stock oreo 2017g
Click to expand...
Click to collapse
that is not too right... If you have a G, you need to roll back to Marshmallow (B10 or B11) and install a SIGNED TWRP (of which there's only one, Tenfar's). [DO NOT BACKUP ANYTHING IN THIS TWRP]
Then from there install the aboot and fbop files present in Controllerboy's unlock guide to get fastboot (via adb commands). then enter fastboot and issue the unlock command
After that, install any other TWRP, the official one from twrp.me might be better for stock ROMs

Based on previous conversation, Tenfar's TWRP is recommended. Can somebody provide me with the TWRP? Cannot find it anywhere due to dead link.

abdinsyakirin said:
Based on previous conversation, Tenfar's TWRP is recommended. Can somebody provide me with the TWRP? Cannot find it anywhere due to dead link.
Click to expand...
Click to collapse
Raystef's G download center, i think it's called 3.0.2-2-SIGNED or something

TWRP App

Is it possible to use the official TWRP app to install on the 6T? Thanks in advance to anyone nice enough to answer ?

Bildo41383 said:
Is it possible to use the official TWRP app to install on the 6T? Thanks in advance to anyone nice enough to answer ?
Click to expand...
Click to collapse
I'm sure it is. I don't see why it wouldn't be seeing how we just got an official TWRP now.
https://www.androidpolice.com/2018/...ble-for-oneplus-6t-moto-z3-and-other-devices/

TheKnux said:
I'm sure it is. I don't see why it wouldn't be seeing how we just got an official TWRP now.
https://www.androidpolice.com/2018/...ble-for-oneplus-6t-moto-z3-and-other-devices/
Click to expand...
Click to collapse
Will I need to reflash majisk as well?

Bildo41383 said:
Will I need to reflash majisk as well?
Click to expand...
Click to collapse
More than likely. A lot of people reported that after flashing Magisk via the zip in TWRP, the phone doesn't boot until you flash Magisk. I as well encountered this issue. If you flash TWRP and reboot recovery and then reboot to system you'll be stuck with a recovery loop until you flash Magisk. Hope this helps.

Required TWRP for Stock Android Pie........

Hey Folks, I am just a newbie here trying to root and try Custom ROMs. Currently, I am using Stock Android Pie with Unlocked Bootloader and 1 June 2019 Security patch. I can really appreciate some help here coz I cannot find a suitable TWRP and Steps for configuration of my device. Thanks in Advance

these are the steps i used
https://wiki.lineageos.org/devices/tissot/install
its working for me

Which Recovery?
mdude22 said:
these are the steps i used
it's working for me
Click to expand...
Click to collapse
It may be working but which TWRP recovery did you use?

i used twrp-3.3.0-2-tissot.img
i found it in this thread:
https://forum.xda-developers.com/mi-a1/development/rom-lineageos-16-0-xiaomi-mi-a1-t3885100
i can upload it here if you want, but im not sure what website to use to upload because it tried using xda and it says file too large

mdude22 said:
i used twrp-3.3.0-2-tissot.img
i found it in this thread:
i can upload it here if you want, but im not sure what website to use to upload because it tried using xda and it says file too large
Click to expand...
Click to collapse
it's only an img file right? there is no zip file

yes, it's called
twrp-3.3.0-2-tissot.img

You can find TWRP in Mi A1 xda forum but the sad news is you can't get permanent TWRP in latest Stock Pie Rom. I just had the permanent TWRP in 1.0.8.0 Stock rom by flashing eXtreme Kernel then flash Cosmic Dan's TWRP Zip Installer otherwise i tried many times but never get permanent TWRP. You can also use official TWRP Zip installer from TWRP's official site

ranjodhricky said:
You can find TWRP in Mi A1 xda forum but the sad news is you can't get permanent TWRP in latest Stock Pie Rom. I just had the permanent TWRP in 1.0.8.0 Stock rom by flashing eXtreme Kernel then flash Cosmic Dan's TWRP Zip Installer otherwise i tried many times but never get permanent TWRP. You can also use official TWRP Zip installer from TWRP's official site
Click to expand...
Click to collapse
I just need root access for now can you please explain the process for latest stock pie rom? I have already unlocked the bootloader and the remaining process on internet is just confusing

jasmeets7 said:
I just need root access for now can you please explain the process for latest stock pie rom? I have already unlocked the bootloader and the remaining process on internet is just confusing
Click to expand...
Click to collapse
1- Boot from patched boot image (ex: fastboot boot patched_boot.img).
2- Install Magisk Manager app.
3- Open it and Select install then direct install.
4- Reboot.
If you want to unroot then select complete uninstall from magisk manager.

Stealtherthreat said:
1- Boot from patched boot image (ex: fastboot boot patched_boot.img).
2- Install Magisk Manager app.
3- Open it and Select install then direct install.
4- Reboot.
If you want to unroot then select complete uninstall from magisk manager.
Click to expand...
Click to collapse
From where can I get patched boot image?

jasmeets7 said:
From where can I get patched boot image?
Click to expand...
Click to collapse
Download stock june boot image from here - https://forum.xda-developers.com/showpost.php?p=79898593&postcount=3
To patch it,
1- Install Magisk Manager app.
2- Select install then select Patch file.
3- It will ask for the boot image, select the downloaded file.
4- It will automatically generate the patched boot image.

Rooted 6T / Update to 10.3.2 with TWRP completed successful / 6T stays at 10.3.1

Hi there
It's very strange. My phone is rooted and normally the update to a new version of OxygenOS works without problems. This time (update to 10.3.2) it's different. I use the following process:
Install full OTA version with TWRP
Install TWRP
Reboot
Install Magisk
After rebooting my 6T it shows immediately that there is a system update to version 10.3.2 available. The version I installed seconds ago. I tried full OTA version from several sources including the one from Oneplus itself. Always the same phenomenon.
Any idea what causes this behavior and how to solve it?

nobody has an idea?

e.m.m.a said:
nobody has an idea?
Click to expand...
Click to collapse
Hello, it seems somehow won't flash...
I would racommend to use LOCAL UPDATE to update your rom.
See THIS THREAD, post #3, very useful thread.
Would to thank @Striatum_bdr and @Scott for their awesome work..
Cheers

Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk

DowneyHere said:
Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
Quick question:
How do I update when i'm on a patche OOS?
I only have Magisk. No TWRP
Hope you or someone can help me out
JP

Johan.constantin said:
Quick question:
How do I update when i'm on a patche OOS?
I only have Magisk. No TWRP
Hope you or someone can help me out
JP
Click to expand...
Click to collapse
Hey dude,
look at the link i posted above,
it explain exactly what you're looking for.
If you have any further doubts you just have to ask...
Cheers

DowneyHere said:
Try this method
- Flash 10.3.2
- Flash Twrp zip
- Reboot to Recovery
- Again Flash 10.3.2
- Flash Twrp zip
- Now Reboot to System
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
Thank you. I will first try this method. does it make a difference if I use the TWRP zip or image to install it? Previously I used img.
And before rebooting system I would install magisk. but that should not affect the uodate, rught?

e.m.m.a said:
Thank you. I will first try this method. does it make a difference if I use the TWRP zip or image to install it? Previously I used img.
And before rebooting system I would install magisk. but that should not affect the uodate, rught?
Click to expand...
Click to collapse
Are you on 10.3.1?
Sent from my OP6T using Tapatalk

DowneyHere said:
Are you on 10.3.1?
Sent from my OP6T using Tapatalk
Click to expand...
Click to collapse
yes

worked. thank you for your help.