Database Users

[TUTORIAL] Easy way for UNLOCK Bootloader and flash TWRP 2.8.6.0 for MX4

All your actions with the phone is at your own risk. The authors are not liable. This is just your choice.
PLEASE read full instructions before you start.
RECOMMENDED ONLY FOR EXPERIENCED USERS.
This was tested ONLY on MEIZU MX4 and ONLY FIRMWARE 4.2.8.2A, ANY OTHER FIRMWARE/PHONE - YOU WILL RECEIVE BRICK PHONE.
(с)
ONLY FOR MEIZU MX4 AND ONLY FIRMWARE 4.2.8.2A. Don't use the that apk on Lollipop or your device will brick​
Hello everyone, i changed chinese apk for unlock bootloader, and replaced chinese recovery, on TWRP 2 8.6.0 recovery.
1. Download Flyme OS 4.2.8.2A stock firmware an official webpage Meizu
2. Flash it in stock recovery and select WIPE DATA
3. Get root permission
4. Download and install that APK - drive.google.com/open?id=0B_Gd_o_kBWgLNHFuZW5kMlFzV2s
5. Open that app, and provide root permission.
6. Press "Press to UNLOCK BootLoader" - and wait, you will see "Unlock Finished"
7. After, will be available recovery mode, and you press to "Enter Recovery Mode"
8. Your phone reboot and enters for normal recovery - TWRP 2.8.6.0.

Thanks for the great work!
At last we're getting closer to opening up our meizu phones.
Can the phone with this, unlocked bootloader flash "I" international roms from OTA?

How to relock?

ideosx5 said:
How to relock?
Click to expand...
Click to collapse
Reflash FLyme rom (with Flyme recovery, be carefull!)
Or flash stock uboot

Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
1. Installed apk method unlock (this thread).
2. Downloaded 4.5.7 "I" firmware, extracted and created system.img using (linux):
$ sdat2img system.transfer.list system.new.dat system.img
for windows, see this guide from Meizufans.
3. Boot into fastboot mode (now unlocked) using "VOL -" + "POWER"
4. fastboot flash boot boot.img
WAIT
fastboot flash system system.img
WAIT
5.Reboot into recovery
6. Full wipe
7. Install super su
8. Reboot
VOILA - 4.5.7 "I"
Remember to block/deactivate system updates once system has booted for first time.

Is it possible for someone to upload recovery.img of TWRP please ? I'd like to try
---------- Post added at 10:16 AM ---------- Previous post was at 09:22 AM ----------
I got it, I'm fixing the splash screen dimensions ahah^^
---------- Post added at 11:03 AM ---------- Previous post was at 10:16 AM ----------
It was a little harder than I expected but it's here : http://www.mediafire.com/download/26b963db1k489db/new-recovery.img

Learnincurve said:
Successfully upgraded MX4 "A" edition phone to "I" using following method:
Installed 4.2.8 "A" stock firmware.
Click to expand...
Click to collapse
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261

And this method works even on newest firmware, let's say 4.5.6i downgraded to 4.2.8i via 4.0.4i? Or is a easy variant of previous method, patched uboot by meizu remains after 4.5.6i upgrade if i understand, no matter if you downgrate to Kitkat?

update for TWRP : http://www.mediafire.com/download/f6a65ccpgrfaopw/TWRPr5.img
Changelog :
I corrected "Select storage" position, corrected some shifts on the main screen

zaurikk said:
Good, but there is easy way download that rom, and install it for TWRP(select full wipe, include internal storage) - emmaus.pro/MX4_custom_roms/Flyme/4.5.7i_twrp.zip
and there all stock Flyme roms for twrp - emmaus.pro/?dir=MX4_custom_roms/Flyme
Author all rom "nikk3d" russian 4pda users - 4pda.ru/forum/index.php?showuser=2196261
Click to expand...
Click to collapse
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.

Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk

itresw said:
I have an MX4 originally with Ubuntu touch, I tried to flash 4.5.7i from emmaus.pro.
It failed, updater binary error. I checked the recovery log and it says write error, no space left.
Does anybody have any clue?
Thanks,
Note: I already tried a wipe out (even internal storage). No issues with the cyanogenmod roms from emmaus.pro.
Click to expand...
Click to collapse
i think, mx4 ubuntu touch version, and standard china version, - internal partitions(storage) name - different, so you gives write an error.

isko01 said:
Is someone trying to make fom Meizu MX5?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Now it is impossible.

zaurikk said:
Now it is impossible.
Click to expand...
Click to collapse
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk

isko01 said:
Thanks for reply . Can I know how much is good Caynogenmod on MX4? Is everything working good?
Sent from my MX5 using Tapatalk
Click to expand...
Click to collapse
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.

i tried on M2 note, i suppose it bricked.is it possible earlier condition working?i look up some unbrick videos, can repairs make my phone working?thanks.

No way to unbrick it, this is for MX4 not M2 Note !!! You'll need to change the motherboard, sorry

zaurikk said:
Yep, all needed function now it work - gsm module, wi-fi, bluetooth and etc.
The only problem, that ROM not officially for Cyanogen team, that rom created by ordinary users and updated 1-2 times on month.
Click to expand...
Click to collapse
Thanks to all user's who making this for MX4. They are really engineers! I hope they will try for MX5.
Yes, the problem it is not official, and we cant get new update.
Why we don't write a email to Canynogen and tell them that we open the bootloader and put CM. But we want they make CM for MX4 and MX5, with new CM and updates?
Sent from my MX5 using Tapatalk

my meizu is bricked, ne response please help me

hi someone had tested this app already? is it surely gonna work??
and after i will unlock the bootloader i can instal any rom? like Mokee and CM12.1??

[Recovery][MI 8 SE] TWRP Recovery Installer

Hi guys,
Easy way to flash TWRP from computer for Mi 8 SE.
Download suitable file from below.
Twrp 3.2.3-1227 Compatible with Android 9 (Beta v8.12.27 and upper versions)
https://www.mediafire.com/file/qtdm3qlivcn4gmw/MI8_SE_TWRP_Yukleme_Araci_81227.zip/file
Twrp 3.2.3-1102 Compatible with Android 8.1 (Lower versions than Beta v8.12.27)
https://www.mediafire.com/file/bsvuaxcg1vghayz/MI8SE_TWRP_Yukleme_Araci.zip/file
1. Your phone bootloader should be unlocked.
2. Make sure USB drivers are installed to PC.
3. Turn on USB Debugging. Settings - More - Developer Options - Usb debugging
4. Press Volume down + power button and reboot to fastboot mode.
5. Connect your USB cable to PC
6. Unzip downloaded package and run twrp-yukleme.bat file.
7. Press enter to continue. When it's done enter to exit program.
8-For steady TWRP install Magisk16.4 when you boot into TWRP.
Thanks to by.Trabzonlu from miuiturkiye

downloaded multiple times
unpacking gives a bug
I tried both links

olinen said:
downloaded multiple times
unpacking gives a bug
I tried both links
Click to expand...
Click to collapse
Thanks for your report.
Links and zips are updated. It should unzip fine now :good:

it's ok, just that I had to run the program first and only after that I joined the mobile in the fastboot. Otherwise, he made a mistake
Thx :good:

9
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me

Alimataei said:
which TWRP u guys use to flash android 9 ? i always get bootloop
and most of the TWRP images here wont even boot for me
Click to expand...
Click to collapse
TWRP 3.2.3 12-17 works for android 9 ?

TacoNikky said:
TWRP 3.2.3 12-17 works for android 9 ?
Click to expand...
Click to collapse
1102 also works for Pie.

I try to install this recovery but nothing happens at all I have installed the rom miui.eu 10.2.2.0 apparently this rom mr deleted the recovery that had already installed before installing this rom:crying:

Have someone trying treble gsi rom? How to proper install? Thanks in advance.

TWRP-3.3.0-0423 whit magisk 19.0 root For Xiaomi mi8 SE
Download Link:
https://mega.nz/#!CrhTmKgY!PE7lXdLtCzPqYO55ulCx2faFLVqPi6mpXXaYOnbbB8s

Could it be possible that this TWRP will work on mi 9 se, too?
Sent from my [device_name] using XDA-Developers Legacy app

putti71 said:
Could it be possible that this TWRP will work on mi 9 se, too?
Click to expand...
Click to collapse
This is mi8se forum!! TWRP is specific for each phone (different kernel, processor...) so there's no way you could install this TWRP img on another phone than Sirius

Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?

Hi! Is there an updated twrp for miui 11 android 10. First time to install this.

greendra8 said:
Getting this error: FAILED (remote: Failed to load/authenticate boot image: Load Error)
Seems to install correctly but doesn't boot into it. Holding power on and volume up boots it back into fast boot. Any ideas?
Click to expand...
Click to collapse
Same as mine. How's your device now?
---------- Post added at 08:16 AM ---------- Previous post was at 08:13 AM ----------
Hi guys. Im getting the error after flashing twrp. At first it works. I will flash rom so i reset it and wipe al data. But it didn't boot into recovery mode. It stays at fastboot. I just dl this installer from somewhere here in xda so i didint know thatmagisk should be flashed afterward. Pls help. I . getting error authentication failed

Trojan00 said:
Same as mine. How's your device now?
Click to expand...
Click to collapse
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.

greendra8 said:
This was a long time ago now and I've since changed device. However, I seem to remember having to switch back to the original Chinese ROM and starting again. It allowed me to install the correct version of TWRP I think. But if you do go back, make sure you don't lock your device again like I did. I think there's a checkbox on the program that you have to use to put the Chinese ROM back on and you need to make sure it's ticked. Sorry if I'm not of much help but it was so long ago now that it's hard for me to remember.
Click to expand...
Click to collapse
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?

Trojan00 said:
My fault is I didn't flash the magisk. I saw this link somewhere here in xda so I didn't know that magisk should be flashed. What twrp did you install?
Click to expand...
Click to collapse
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.

greendra8 said:
These were the notes that I left myself:
After boot, go into Fastboot and flash recovery 3.2.3-1217 twrp
Using this, wipe everything apart from bottom box on advanced wipe. Do twice, reboot once in the middle.
Flash EU rom. Do the wipe it promts after install and boot up.
Then use fastboot to flash recovery TWRP-EU, and flash magisk (canary build) to keep twrp installed.
I'm not sure what version this TWRP-EU is, so I've just uploaded it to Google Drive for you here.
Hope this helps.
Click to expand...
Click to collapse
Bro i downloaded the stock fastboot firmware. But in mi flash it says can not found file flash_all.bat

Realme UI android 10 download here

Hi guys
Realme UI already available.
Download torrent here. Taken from realme x2 pro official group
https://www12.zippyshare.com/v/Rbyqjz3Y/file.html
Flash via twrp
use this recovery
https://www35.zippyshare.com/v/9rJGzafw/file.html
format dalvik cache/system and data
flash the ozip
reboot system
if you want to relock bootloader, foloow the guide. any try to relock the bootloader with nothing else than stock recovery, will hard brick your phone

nosidefcp said:
Hi guys
Realme UI already available.
Download torrent here. Taken from realme x2 pro official group
https://www12.zippyshare.com/v/Rbyqjz3Y/file.html
Flash via twrp
Click to expand...
Click to collapse
Will it work if no indian ?

I tried to install it in the Indian version and it gives me an error and does not install
Enviado desde mi RMX1931 mediante Tapatalk

It's safe to flash it using TWRP? doesn't close the bootloader or anything dangerous?

nosidefcp said:
Hi guys
Realme UI already available.
Download torrent here. Taken from realme x2 pro official group
https://www12.zippyshare.com/v/Rbyqjz3Y/file.html
Flash via twrp
Click to expand...
Click to collapse
Can you give me the link of the Realme X2 Pro Official Group?

Download Google Drive
https://drive.google.com/drive/folders/1nmAWdIdsHHSuuSS8wCPyb9UXNwDlSFmf?usp=sharing

dertester1 said:
Download Google Drive
https://drive.google.com/drive/folders/1nmAWdIdsHHSuuSS8wCPyb9UXNwDlSFmf?usp=sharing
Click to expand...
Click to collapse
I am downloading right no for later flash it.
Do you allready flash it sucesseful?

almmpt said:
I am downloading right no for later flash it.
Do you allready flash it sucesseful?
Click to expand...
Click to collapse
Not yet, I'll test in 1-2 hours

Downloaded it. Install doesn't complete, just reboots after some seconds...still on colorOS 6.1 A10

Can't make it work,it throws an error "zip treble compatibility error" using latest TWRP-12
I'm doing something wrong?

_phil07_ said:
Downloaded it. Install doesn't complete, just reboots after some seconds...still on colorOS 6.1 A10
Click to expand...
Click to collapse
Do you have bootloader locked?
I have booloader locked and my smartphone is fully stock, can I apply this OZIP update?

almmpt said:
Do you have bootloader locked?
I have booloader locked and my smartphone is fully stock, can I apply this OZIP update?
Click to expand...
Click to collapse
My x2 pro is also locked and fully stock, the ozip install won't work

Is this for the Chinese model or the international model?

Its only install a VPN, connect to India and the OTA Realme UI appears
I updates to Realme UI via OTA. Great update. Everything is different for better at first view.
Realme UI https://imgur.com/gallery/0Kd1HIg

Ricochet90 said:
Can't make it work,it throws an error "zip treble compatibility error" using latest TWRP-12
I'm doing something wrong?
Click to expand...
Click to collapse
Same for me, also with twrp 12, all android 9 updated worked but this one doesn't.
Probably is made to work only with India IMEI codes?

use this recovery
https://www35.zippyshare.com/v/9rJGzafw/file.html
format dalvik cache/system and data
flash the ozip
reboot system
if you want to relock bootloader, foloow the guide. any try to relock the bootloader with nothing else than stock recovery, will hard brick your phone

Your link to the recovery file does not work - 403 Forbidden

[email protected] said:
Your link to the recovery file does not work - 403 Forbidden
Click to expand...
Click to collapse
its working fine here. but here is another link for recovery https://easyupload.io/2r1j5r

nosidefcp said:
use this recovery
https://www35.zippyshare.com/v/9rJGzafw/file.html
format dalvik cache/system and data
flash the ozip
reboot system
if you want to relock bootloader, foloow the guide. any try to relock the bootloader with nothing else than stock recovery, will hard brick your phone
Click to expand...
Click to collapse
ok I can confirm that this works fine but now I can't flash magisk, not the latest stable (with the fix) or the canary version,anyone can help?

My problem is after flashing the OZIP it only boots into recovery (also when choosing reboot system).
I haven't wiped anything.

[RECOVERY][3.4.0-14][toco]Unofficial TWRP Xiaomi Mi Note 10 Lite (TEST)

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Flash Rom works
- F2FS support
- Fastboot boot command support
Not working:
- Fastbootd
- Adb sideload
- Backup restore and image flash (system-vendor-product)
- Android 11 fully support
Download:
TWRP 3.4.0-14 Unofficial by mauronofrio
TWRP 3.4.0-13 Unofficial by mauronofrio
To Flash the TWRP:
Code:
fastboot flash recovery twrp-3.3.1-xx-xxxxxx-mauronofrio.img
Then reboot in TWRP manually or using a fastboot command.
Code:
fastboot boot twrp-3.3.1-xx-xxxxxx-mauronofrio.img
or
Code:
fastboot oem reboot-recovery
REMEMBER: is important that from fastboot you directly go in TWRP mode or the TWRP will be overwritten.
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Source code:
https://github.com/Teamwin/android_bootable_recovery
https://github.com/mauronofrio/android_device_xiaomi_toco
My Telegram TWRP Support Group:
https://t.me/twrp_Mauronofrio
Donations:
Credits:
- Thanks to @bigbiff and @Captain_Throwback for the hard work on this android 10 TWRP
Thanks to all testers on the Telegram Group
Created 2020-05-29

Oooo finally... Gonna test this out when I get home later.
Just to check, what happens if i flash and i get bootloop? How do I recover? By flashing the entire MIUI rom from official site?
Okay Im sure im being a noob... But err...
I wasnt able to mount data...
I tried to mount and install MAGISK via USB-OTG mounting and i get permission denied for system and vendor (and also Data unable to mount)
EDIT2: Oh cool... despite the errors Magisk got installed! Nice!

Hello, will there be more development for this terminal? and the note 10 lite thread? Thank you

Did anyone boot it?
hello, work boot it?
fastboot boot twrp.XXXX.img

StanGumn said:
hello, work boot it?
fastboot boot twrp.XXXX.img
Click to expand...
Click to collapse
Yes

iron maiden said:
Hello, will there be more development for this terminal? and the note 10 lite thread? Thank you
Click to expand...
Click to collapse
Let us hope so.

I would like to apologize in advance as I am a noob when it comes to the recent changes made by Google to android. So on a lot of the recent devices launched with android 10, an essential step before flashing Magisk is to disable the vbmeta partition by flashing the "vbmeta.img" using a fastboot command with the --disable-verify and --disable-verification argument. My question is that is the "vbmeta.img" modified by developers or is this the same identical file found in the stock firmware files?
I do apologize if this is the wrong thread but there's not many resources online or even on xda for this device.

Why its in mi note 10 general section? Isnt right to do separately section for mi note 10 lite since there is nothing in common just name.

Reanimax said:
Why its in mi note 10 general section? Isnt right to do separately section for mi note 10 lite since there is nothing in common just name.
Click to expand...
Click to collapse
ask to xda to make a dedicated section and i will ask to move this thread

mauronofrio said:
ask to xda to make a dedicated section and i will ask to move this thread
Click to expand...
Click to collapse
Yes. You right about it.

Kediraksith said:
Oooo finally... Gonna test this out when I get home later.
Just to check, what happens if i flash and i get bootloop? How do I recover? By flashing the entire MIUI rom from official site?
Okay Im sure im being a noob... But err...
I wasnt able to mount data...
I tried to mount and install MAGISK via USB-OTG mounting and i get permission denied for system and vendor (and also Data unable to mount)
EDIT2: Oh cool... despite the errors Magisk got installed! Nice!
Click to expand...
Click to collapse
Nowadays you have to unmount Data and mount vendor (just in case for Vendor) before flashing Magisk. Mounting data does not let Magisk install via TWRP. Follow the this process, same install process with the Mi Note 10, and assuming the Mi note 10 Lite. The reason why is because of encryption.
Update: 5/16/2020
1) Flash lastest TWRP unofficial 3.31-4 mauronofrio using Command prompt using the - fastboot flash recovery [XXXX].img. Note: it's easier to just rename the recover image to "twrp"
2) Then - fastboot boot [XXXX].img to reboot into TWRP recovery.
3) In my experience for thr Mi Note 10 that is, the reboot to RECOVERY did not happened, so instead i pressed - volume up and power button at the same time for thr phone to reboot until you see the boot splash screen, hold the two buttons for another 3 seconds ... and then let go of power button and then TWRP recovery will show up.
4) Ok...so first things first... flash the VBMETA PATCHER like the OP says on first page --> that way you don't lose TWRP after flashing the Rom and MAGISK. After install, reboot to RECOVERY. ***This is only if OP asks to flash VBMETA PATCHER, otherwise skip to Step 5***
5) Now....go to FORMAT DATA (Warning: DON'T use advanced wipe)... Instead, go to the FORMAT DATA, type in yes and press ok. Then go back to main menu, and reboot to RECOVERY again.
6) Now you can access your internel memory when connecting to USB... You can import the two neccesary files --> Xiaomi.EU and MAGISK 20.4. Now Flash the Rom and when flash MAGISK, make sure you unmount DATA and mount VENDOR to avoid flash error. After unticking DATA, you can now install Magisk.
7) Now you can go to REBOOT, and press SYSTEM, and the phone will boot to Xiaomi EU 11 or 12, etc. just follow this process and enjoy your ROM. ?
Note: When updating, flash EU rom and Magisk, dont forget to unmount Data when flashing Magisk. You can probably disable decryption because that is why you can't mount Data when flashing Magisk. **Just don't ask me about it because I normally don't flash Disable Decyption often.

Wmateria said:
Nowadays you have to unmount Data and mount vendor (just in case for Vendor) before flashing Magisk. Mounting data does not let Magisk install via TWRP. Follow the this process, same install process with the Mi Note 10, and assuming the Mi note 10 Lite. The reason why is because of encryption.
1) Flash lastest TWRP unofficial 3.31-4 mauronofrio using Command prompt using the - fastboot flash recovery [XXXX].img. Note: it's easier to just rename the recover image to "twrp"
2) Then - fastboot boot [XXXX].img to reboot into TWRP recovery.
3) In my experience for thr Mi Note 10 that is, the reboot to RECOVERY did not happened, so instead i pressed - volume up and power button at the same time for thr phone to reboot until you see the boot splash screen, hold the two buttons for another 3 seconds ... and then let go of power button and then TWRP recovery will show up.
4) Ok...so first things first... flash the VBMETA PATCHER like the OP says on first page --> that way you don't lose TWRP after flashing the Rom and MAGISK. After install, reboot to RECOVERY.
5) Now....go to FORMAT DATA (Warning: DON'T use advanced wipe)... Instead, go to the FORMAT DATA, type in yes and press ok. Then go back to main menu, and reboot to RECOVERY again.
6) Now you can access your internel memory when connecting to USB... You can import the two neccesary files --> Xiaomi.EU and MAGISK 20.4. Now Flash the Rom and when flash MAGISK, make sure you unmount DATA and mount VENDOR to avoid flash error. After unticking DATA, you can now install Magisk.
7) Now you can go to REBOOT, and press SYSTEM, and the phone will boot to Xiaomi EU 11 or 12, etc. just follow this process and enjoy your ROM.
Note: When updating, flash EU rom and Magisk, dont forget to unmount Data when flashing Magisk. You can probably disable decryption because that is why you can't mount Data when flashing Magisk. **Just don't ask me about it because I normally don't flash Disable Decyption often.
Click to expand...
Click to collapse
this post is gold! Coming back to xiaomi and twrp after 2 years with a huawei, hope to go smooth again with root magisk etc!

cerme said:
this post is gold! Coming back to xiaomi and twrp after 2 years with a huawei, hope to go smooth again with root magisk etc!
Click to expand...
Click to collapse
The root and flash process is basically the same process as the Mi 9T/K20, Mi Max 3, Mi Note 10 since decryption is now a common thing with Android 10... except for the VBmeta.zip, which is new and necessary to flash, as long as you follow the directions..you'll be fine.

Wmateria said:
The root and flash process is basically basically the same process as the Mi 9T/K20, Mi Max 3, Mi Note 10 since decryption is now a common thing with Android 10... except for the VBmeta.zip, which is new and necessary to flash, as long as you follow the directions..you'll be fine.
Click to expand...
Click to collapse
I understand. Last experience ti flash etc was on a mi5, so I have a little bit of rust with that. I do think that following instructions i shouldn't face major difficulties

cerme said:
I understand. Last experience ti flash etc was on a mi5, so I have a little bit of rust with that. I do think that following instructions i shouldn't face major difficulties
Click to expand...
Click to collapse
Same here, i was on the Mi 9T before, I didnt understood the whole new flashing process and carefully updating from EU Rom to AOSP Roms and back, I think i was messing with with thwe wipe and change partition feature (f2fs to ext 4 with an EU Rom) - then the Mi 9T bricked big time. Never recovered after that, luckily got it refunded for it but not many may have that second chance. After learning how to flash propeely and root, ect. I try to help out here when needed and ask too. I just got my Mi Note 10 2 weeks ago and rooted a week ago. So if anything, am willing to help out and repeat the following flash process or any changes in the future and feedback on future Roms.

Was thinking about which rom to use... does xiaomi.eu is stille faster with providing updates? what about the situation with OTA with that.
Now I have the phone with global rom, I want at least flash the EEA rom. But I also know that at some point i want to root, install magisk and get nice features. Still don't want to update manually everytime for an update...

will be watching this thread with much interest..
I recently bought this device (Global version) for use here in Australia.
my first time owning a Xiaomi - quite happy with it so far.
would be nice to have the themeing stuff work properly - I have used MIUI based ROMs back a LOoonggg time ago, in the days of the Nexus S and Galaxy Nexus etc.
used to have a new ROM flashed every couple of days lol, back then. But recent years I've stopped all that, no cool ROMs no snazzy kernels TWRP no nothing not even root lol, very boring!
anyway thanks for posting I hope to try this sometime soon

Hello is there any Eu rom for Mi note 10 lite?

Alisiddiqui75 said:
Hello is there any Eu rom for Mi note 10 lite?
Click to expand...
Click to collapse
yes, there is the EEA ROM you can find on miui website. You can flash it after unlocking bootloader with miFlash

Alisiddiqui75 said:
Hello is there any Eu rom for Mi note 10 lite?
Click to expand...
Click to collapse
I'm not sure if you mean the official ROM or xiaomi.eu.
The link to the official EEA(EU) ROM:
Recovery: https://bigota.d.miui.com/V11.0.7.0.QFNEUXM/miui_TOCOEEAGlobal_V11.0.7.0.QFNEUXM_7926bf9c02_10.0.zip
Fastboot: https://bigota.d.miui.com/V11.0.7.0...EUXM_20200508.0000.00_10.0_eea_4eb1c694c9.tgz
I have yesterday seen a xiaomi.eu Stable build for toco which is based on Global Stable ROM:
https://sourceforge.net/projects/xi...e10LITE_V11.0.4.0.QFNMIXM_v11-10.zip/download
I can not promise that it's working.

Twrp recovery

I'm not responsible for any damage to your device. For more info check Xiaomi.eu (source)
Bootloader needs to be unlocked: http://en.miui.com/unlock/
Install TWRP via Fastboot mode
Code:
fastboot flash recovery twrp.img
fastboot boot twrp.img
https://androidfilehost.com/?fid=4349826312261761273
Ps: It worked for me.
Optional: (I haven't tried this yet)
For ROOT install Magisk (may cause lags and fingerprint issue) in TWRP, reboot one more time after install to get rid of system lags.
https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip
https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
If you decide to install Xiaomi eu roms: Go with the stable version of miui11. Code name of the rom is "Imi" K30 pro (it is also for pocof2pro)
https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv11/
ROMs for devices with locked bootloader:
Unlock your bootloader here, this will erase your data. Make a backup. http://en.miui.com/unlock/
Install TWRP via Fastboot mode, then install ROM
Code:
fastboot flash recovery twrp.img
fastboot boot twrp.img
TWRP Recovery Zip or TWRP.ME (link above)
FORMAT / Wipe your data,cache,Internal storage,dalvik DONT WIPE SYSTEM OR YOU WILL BRICK YOUR DEVICE!!!
Copy ROM to the internal storage
Install ROM
Reboot
done
Installation via TWRP:
- Download zip to internal storage
- Updater - Menu (...) - Reboot to Recovery.
- Install - Select zip
- Reboot
- Done
Cheers
More info:
[ROM][LMI][10] Xiaomi.eu Weekly | Stable MIUI 12 for Redmi K30 Pro/Zoom/Poco F2 Pro thread

New at making tutorials
I'm new at this so please bear with me ?

Redmi k30 pro, k30 pro zoom and Poco f2 pro all flash with lmi. The k30 pro zoom is lmipro but uses the same as the other 2 models.

Is there a reason you recommend version 17.1 of Magisk?
The current version is 20.4: https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip

No reason ?
cgdams said:
Is there a reason you recommend version 17.1 of Magisk?
The current version is 20.4: https://github.com/topjohnwu/Magisk/releases/download/v20.4/Magisk-v20.4.zip
Click to expand...
Click to collapse
I did not see there was a newer version. Thanks ?

Hi you mean never delete system or persist, You just have to do the right data format and nothing else, and install Xiaomi EU, I know that you must also wipe the system and vendor advice from the MIUI MIX guys I don't know you get confused so
---------- Post added at 11:01 AM ---------- Previous post was at 10:58 AM ----------
Hi you mean never delete system or persist, You just have to do the right data format and nothing else, and install Xiaomi EU, I know that you must also wipe the system and vendor advice from the MIUI MIX guys I don't know you get confused so

Cool
rosy09 said:
Hi you mean never delete system or persist, You just have to do the right data format and nothing else, and install Xiaomi EU, I know that you must also wipe the system and vendor advice from the MIUI MIX guys I don't know you get confused so
---------- Post added at 11:01 AM ---------- Previous post was at 10:58 AM ----------
Hi you mean never delete system or persist, You just have to do the right data format and nothing else, and install Xiaomi EU, I know that you must also wipe the system and vendor advice from the MIUI MIX guys I don't know you get confused so
Click to expand...
Click to collapse
Could you then write how to do the right data format? I'll add it to the post. Thanks for clearing that ?

Is this TWRP chinese version? Any links for english version of TWRP?

Twrp version
spicediablo said:
Is this TWRP chinese version? Any links for english version of TWRP?
Click to expand...
Click to collapse
Right now it is the only version I know of. You can find more info in the xiaomi eu web page.

don't really wanna install some unofficial twrp. Probably gonna wait till the official twrp website hosts the recovery for this device.
Does anyone know when or if teamwin is gonna release an official twrp?

Teamwin
herpsnderpsn said:
don't really wanna install some unofficial twrp. Probably gonna wait till the official twrp website hosts the recovery for this device.
Does anyone know when or if teamwin is gonna release an official twrp?
Click to expand...
Click to collapse
I have just asked through their webpage. I'll let you know as soon as they write back.

spicediablo said:
Is this TWRP chinese version? Any links for english version of TWRP?
Click to expand...
Click to collapse
just change language to english

Any drivers?

Great work!
I suggest to move this thread to "Xiaomi Poco F2 Pro (Redmi K30 Pro) ROMs, Kernels, Recoveries, & Other Development".
And maybe use a naming convention and a template for the first post also add sourcecode.

Noob
GoldeneyeS2 said:
Great work!
I suggest to move this thread to "Xiaomi Poco F2 Pro (Redmi K30 Pro) ROMs, Kernels, Recoveries, & Other Development".
And maybe use a naming convention and a template for the first post also add sourcecode.
Click to expand...
Click to collapse
Hello ?,
I'm a noob at this. I just posted this because it took so long to have a thread that I wanted to show that there was some development on the device. There is a better thread in the forum about the same recovery and rom. Is there a way to delete this thread?

urez2beat said:
just change language to english
Click to expand...
Click to collapse
Does Twrp fit? Good Poco F2? cyanogenmods.org/twrp-poco-f2-pro/[/url]
Someone tried ?

leelossyferi said:
Does Twrp fit? Good Poco F2? cyanogenmods.org/twrp-poco-f2-pro/[/url]
Someone tried ?
Click to expand...
Click to collapse
Yes, works fine

Actually I'm finding alot of problems with this TWRP and I just hope TEAMWIN puts out an official version

urez2beat said:
Actually I'm finding alot of problems with this TWRP and I just hope TEAMWIN puts out an official version
Click to expand...
Click to collapse
Yeah me too, had trouble flashing the updated gpu drivers via using the Chinese twrp.

XDRdaniel said:
Yes, works fine
Click to expand...
Click to collapse
Yep. Though on consecutive reboots it just goes back to stock recovery unless I fastboot boot recovery.img again.
I haven't installed lazy flasher etc though.