Related
This guide was made before Kingroot was able to root the official update. But thanks to @oskar and @TheDerekHarper on XDA and to @josephwv on Android forums it is now comfirmed that Kingroot will root the official update. But first you must still follow steps #1 through #6 so Kingroot can root your device.
Now before Kingroot was able to root the update I figured out how to root the official update and it is not all to complicated. The following guide will walk you through the root process. But I am not responsible for anything that happens to your devices by using this guide as you are responsible for your device.
What you need:
1. A computer running Linux or Windows with adb and fastboot installed. (I used Ubuntu)
2. If you are using Windows you need all the drivers for your device installed. Linux users will not have to worry about this.
3. A functioning USB cable for your device.
4. Battery charged at least 50% just for safety.
5. The TWRP revovery.img, this is the same TWRP recovery we already have for the LG G Stylo I have just renamed it to recovery.img to make it easier to type the name in while typing fastboot commands.
6. The SuperSU-v2.65-20151226141550.zip by Chainfire. (All credit to Chainfire for this awesome zip.)
How to root your device:
1. I suggest you first go to Settings/General/About Phone/Software info and tap on the "Build number" until it says"You are now a developer". Then back out of until you are in Settings/General and go to "Developer options" and turn "Enable OEM unlock" on. This is to allow TWRP recovery to be able to boot. Also turn on "USB debugging" while you are there.
2. Download the SuperSU-v2.65-20151226141550.zip to your device. You need to move the zip file from your Downloads folder to somewhere on your external SD card as it will not be deleted from there when you use the "fastboot oem unlock" command in step #6.
3. Download the recovery.img to your computer. If you do not have adb and fastboot setup globally for linux or in your path for windows you need to move the recovery.img to the directory your adb and fastboot is in and open a terminal or command line (depending on your OS) in that directory or cd to that directory. If you do have adb and fastboot globally or in your path you can just open a terminal or command line in the directory you have the recovery.img or cd to the directory you have the recovery.img.
4. Once you have the terminal or command line open run the command "adb devices" to make sure your devices is detected by adb. You may get a toast pop up on your device asking if you to "Allow usb debugging". Except this as this is the RSA key you need to allow your computer to communicate with your device via adb. You should see something like "LGH631dffacad9 device" in your terminal or command line. If you see "unauthorized" instead of "device" you have not excepted the RSA key.
5.Now type the following command in your terminal or command line. Type "adb reboot bootloader". This will reboot your device to fastboot mode. Once in fastboot mode use the "fastboot devices" to make sure your device is recognized by fastboot. You should see something like "dffacad9 fastboot". If you are in Linux and get a error message you may have to use "sudo fastboot devices" for fastboot to work. (If you are using Windows and are having trouble with fastboot recognizing your device you need to install the device drivers. If it still does not work install the drivers again with your device connected to your computer in fastboot mode.)
6. To fully unlock your bootloader you have to use the command "fastboot oem unlock". You have to do this or this root method will not work. But be warned that if you do use this command it will factory reset your device. Plus you will get a line of text saying the bootloader is unlocked on the splash screen when you boot your device.
6-1: If you are wanting to use Kingroot to root your device you can reboot your device now. Open the Kingroot app and let it root your device and then use Flashify, Rashr, or a similar app to flash the recovery. Then boot to recovery and flash the SuperSU.zip in recovery and it will remove Kingroot and have SuperSU installed on your device.
7. Now you can do this two ways if you do not want to keep the stock recovery you can use the command "fastboot flash recovery.img" to install the recovery and then use the command "fastboot reboot recovery" to boot to the TWRP recovery. (If this command gives you issue like it seems to be for many then just use the the following method and then use Flashify or Rashr app to install TWRP after you are done rooting.) If you want to keep the stock recovery you can use the command "fastboot boot recovery.img" to boot to the TWRP recovery.
8. Once you are booted to the TWRP recovery you should make a full backup first so you have a backup to restore to in case things go bad. After you make a backup then select install and then find the SuperSU-v2.65-20151226141550.zip and install it. Once it is installed reboot your device to system. If TWRP gives you a warning about the su binaries missing and asks if you want to install thee su binaries before you reboot select no or it will interfere with the rooting process of the SuperSU.zip. When your device reboots it will boot to the LG splash screen and then reboot again. But then it will boot to the OS but it will take a minute. Make sure you let your device reboot all the way to the lockscreen or home screen depending on if you have a lockscreen enabled or not. You should be fully rooted after this, enjoy.
Resserved in case needed later.
Thank you.
target reported max download size of 268435456 bytes
sending 'recovery' (11300 KB)...
OKAY [ 0.359s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.359s
ok so i know this is 100% my fault for not reading, but why would you even include step 6? it wipes everything including the supersu.zip. the files i'm pissed about, but i can get over. mostly music plus some ****ty pictures. contacts can text me. but the main thing is i had to restart my phone, get it started up and everything, then put the super su.zip back onto the phone. just a tedious task.
Can I use this guide with my G4 Stylus (H635)?
wtf... i get this same error
C:\adb>fastboot flash recovery v10.img
target reported max download size of 268435456 bytes
sending 'recovery' (11230 KB)...
OKAY [ 0.390s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.390s
I've tried multiple versions of the TWRP for the g stylo on adroidforum and none of it flashes with the fastboot flash recovery .....img option. Every single one fails. Please tell me how you flashed the recovery... Also I cant run it through Flashify because my SuperSU says no binary is installed... I'm completely lost at this point
aaron2z said:
wtf... i get this same error
C:\adb>fastboot flash recovery v10.img
target reported max download size of 268435456 bytes
sending 'recovery' (11230 KB)...
OKAY [ 0.390s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.390s
I've tried multiple versions of the TWRP for the g stylo on adroidforum and none of it flashes with the fastboot flash recovery .....img option. Every single one fails. Please tell me how you flashed the recovery... Also I cant run it through Flashify because my SuperSU says no binary is installed... I'm completely lost at this point
Click to expand...
Click to collapse
Someone mentioned using the Kingroot app and I gotta admit, I was skepticle at first but after testing. I can confirm it works.
Just go go KingRoot.net, download their apk, install and run the root program. Igll work out of the box after, sadly I couldn't get the above method to work either with super su.
aaron2z said:
wtf... i get this same error
C:\adb>fastboot flash recovery v10.img
target reported max download size of 268435456 bytes
sending 'recovery' (11230 KB)...
OKAY [ 0.390s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.390s
I've tried multiple versions of the TWRP for the g stylo on adroidforum and none of it flashes with the fastboot flash recovery .....img option. Every single one fails. Please tell me how you flashed the recovery... Also I cant run it through Flashify because my SuperSU says no binary is installed... I'm completely lost at this point
Click to expand...
Click to collapse
do the fastboot boot recovery.img so it boots up twrp then flash the supersu zip then boot your phone you should be rooted then flash twrp using flashify
I was getting the same error, ( in step 7 don't flash the recovery )
just use "fastboot boot recovery.img" and it will boot to TWRP without installing it
you can then install SU, ( note ) when you exit or re boot from TWRP it will say SU in not installed do you want to install it, I did the first time and it seemed to hose up, so I did everything over and the second time selected no to re install.
once booted I used flashify to install the TWRP img, and I am able to boot to recovery using Quickboot apk
on a side note I have SU installed, I can use root explorer and other apps that ask for SU access, but Titanium backup
doesn't seem to uninstall apps anymore, they seem to re install after a reboot
Hope this helps yall's
aaron2z said:
wtf... i get this same error
C:\adb>fastboot flash recovery v10.img
target reported max download size of 268435456 bytes
sending 'recovery' (11230 KB)...
OKAY [ 0.390s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.390s
I've tried multiple versions of the TWRP for the g stylo on adroidforum and none of it flashes with the fastboot flash recovery .....img option. Every single one fails. Please tell me how you flashed the recovery... Also I cant run it through Flashify because my SuperSU says no binary is installed... I'm completely lost at this point
Click to expand...
Click to collapse
TheDerekHarper said:
Someone mentioned using the Kingroot app and I gotta admit, I was skepticle at first but after testing. I can confirm it works.
Just go go KingRoot.net, download their apk, install and run the root program. Igll work out of the box after, sadly I couldn't get the above method to work either with super su.
Click to expand...
Click to collapse
I gotta be honest... I'm pretty skeptical to try it. I've read of everyone having either a softbrick boot loop or the root just not staying after reboot. Yours worked for H631 T-mobile 6.0 and stayed? If you confirm T-mobile variant and 6.0 I'll try it. There's a lot of headache with this method for me (not saying it doesn't work). I bricked my phone trying to get the binary files for SU by trying to reroot. But unbricked it with LG Flash Tools and a stock kdz. So I don't want to brick it again twenty minutes later lol
aaron2z said:
I gotta be honest... I'm pretty skeptical to try it. I've read of everyone having either a softbrick boot loop or the root just not staying after reboot. Yours worked for H631 T-mobile 6.0 and stayed? If you confirm T-mobile variant and 6.0 I'll try it. There's a lot of headache with this method for me (not saying it doesn't work). I bricked my phone trying to get the binary files for SU by trying to reroot. But unbricked it with LG Flash Tools and a stock kdz. So I don't want to brick it again twenty minutes later lol
Click to expand...
Click to collapse
Made a tutorial on how to get the marshmallow update (i.e. rom i've used.)
And then afterwards i downloaded Minimal ADB & Fastboot, OEM Unlocked the device (for safety) and downloaded the Kingroot Apk.
Installed it, and just allowed the program to root. It was pretty simple, haven't had any issues (i've even disabled OEM Unlock from the phone & USB Debugging.)
Hell, even adoptable storage is enabled for my phone too (but that's another tutorial from somewhere else.)
I do plan to make a root video, just so someone could see it and grab their opinion.
To be clear: I'm using a metroPCS LG Stylo. Also, only time the phone had issues was when i factory reset it to get rid of root. (didn't work)
so i had to follow the steps from the above tutorial to reflash the stock rom.
jothe1 said:
do the fastboot boot recovery.img so it boots up twrp then flash the supersu zip then boot your phone you should be rooted then flash twrp using flashify
Click to expand...
Click to collapse
well this did it, the root actually worked.
I got a permanent root from the procedure listed on page one of this thread. The only thing I did differently was, when booted into TWRP and you try to re boot the system you will get the question if you want TWRP to install root. If you do allow TWRP to install root, you wont get root. At this point select the option to just reboot the phone. The LG Logo will appear twice before it fully boots. When the device is fully up, you will have root.
Foamp said:
ok so i know this is 100% my fault for not reading, but why would you even include step 6? it wipes everything including the supersu.zip. the files i'm pissed about, but i can get over. mostly music plus some ****ty pictures. contacts can text me. but the main thing is i had to restart my phone, get it started up and everything, then put the super su.zip back onto the phone. just a tedious task.
Click to expand...
Click to collapse
My apologies as I made a typo in the guide. The correct command is "fastboot flash recovery recovery.img" to flash the recovery. I will fix this along with another rework about putting the SusperSU.zip only on your SD card.
oskar5510 said:
Can I use this guide with my G4 Stylus (H635)?
Click to expand...
Click to collapse
I do not know if you can use it or not as I do not have that device. But you can try it bit if your device does not boot to fastboot mode when you issue the adb reboot bootloader command then your device's bootloader is not unlockable and this root method will not work for you. But from the posts in this thread point out that Kingroot now works on the 6.0 update so you can also try Kingroot to see if it willroot your device.
aaron2z said:
wtf... i get this same error
C:\adb>fastboot flash recovery v10.img
target reported max download size of 268435456 bytes
sending 'recovery' (11230 KB)...
OKAY [ 0.390s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.390s
I've tried multiple versions of the TWRP for the g stylo on adroidforum and none of it flashes with the fastboot flash recovery .....img option. Every single one fails. Please tell me how you flashed the recovery... Also I cant run it through Flashify because my SuperSU says no binary is installed... I'm completely lost at this point
Click to expand...
Click to collapse
Again sorry as this is fully my fault for making the typo on the fastboot command to flash recovery. I am fixing it as soon as I am done with this post.
TheDerekHarper said:
Someone mentioned using the Kingroot app and I gotta admit, I was skepticle at first but after testing. I can confirm it works.
Just go go KingRoot.net, download their apk, install and run the root program. Igll work out of the box after, sadly I couldn't get the above method to work either with super su.
Click to expand...
Click to collapse
Thank you for posting this.
jothe1 said:
do the fastboot boot recovery.img so it boots up twrp then flash the supersu zip then boot your phone you should be rooted then flash twrp using flashify
Click to expand...
Click to collapse
Yes this is how I did it when I rooted my device. I will edit the guide some to point this out.
AgainstTheFlow said:
I got a permanent root from the procedure listed on page one of this thread. The only thing I did differently was, when booted into TWRP and you try to re boot the system you will get the question if you want TWRP to install root. If you do allow TWRP to install root, you wont get root. At this point select the option to just reboot the phone. The LG Logo will appear twice before it fully boots. When the device is fully up, you will have root.
Click to expand...
Click to collapse
Thank you for posting this so others can see this does work.
infektedpc said:
target reported max download size of 268435456 bytes
sending 'recovery' (11300 KB)...
OKAY [ 0.359s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.359s
Click to expand...
Click to collapse
I also apologize to you for my mistake. It will be corrected shortly.
TheDerekHarper said:
Made a tutorial on how to get the marshmallow update (i.e. rom i've used.)
And then afterwards i downloaded Minimal ADB & Fastboot, OEM Unlocked the device (for safety) and downloaded the Kingroot Apk.
Installed it, and just allowed the program to root. It was pretty simple, haven't had any issues (i've even disabled OEM Unlock from the phone & USB Debugging.)
Hell, even adoptable storage is enabled for my phone too (but that's another tutorial from somewhere else.)
I do plan to make a root video, just so someone could see it and grab their opinion.
To be clear: I'm using a metroPCS LG Stylo. Also, only time the phone had issues was when i factory reset it to get rid of root. (didn't work)
so i had to follow the steps from the above tutorial to reflash the stock rom.
Click to expand...
Click to collapse
Thanks for posting this I will add this to the post as another option to root seeing as it is comfirmed. I will give credit to you and @oskar for this info.
Is there anyway to do this without wiping your data from 'fastboot oem unlock'? My bootloader keeps saying locked in fastboot mode even though I checked Enable OEM Unlock in settings. It won't let me boot the recovery.img because it's locked.
supersonic125 said:
Is there anyway to do this without wiping your data from 'fastboot oem unlock'? My bootloader keeps saying locked in fastboot mode even though I checked Enable OEM Unlock in settings. It won't let me boot the recovery.img because it's locked.
Click to expand...
Click to collapse
Are you trying to use the fastboot boot recovery.img command?
Yeah, if I try to flash instead of booting I get:
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 268435456 bytes
sending 'recovery' (11300 KB)...
OKAY [ 0.380s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.401s
supersonic125 said:
Yeah, if I try to flash instead of booting I get:
C:\adb>fastboot flash recovery recovery.img
target reported max download size of 268435456 bytes
sending 'recovery' (11300 KB)...
OKAY [ 0.380s]
writing 'recovery'...
FAILED (remote: unknown command)
finished. total time: 0.401s
Click to expand...
Click to collapse
Hmmm looks like maybe fully unlocking the bootloader enables all fastboot commands. You can try downloading and installing Kingroot and root with it as the posts here comfirm it will root the update now. Or just u lock the bootloaderb but your device will be reset if you do.
T-Macgnolia said:
Hmmm looks like maybe fully unlocking the bootloader enables all fastboot commands. You can try downloading and installing Kingroot and root with it as the posts here comfirm it will root the update now. Or just u lock the bootloaderb but your device will be reset if you do.
Click to expand...
Click to collapse
What if we just enable oem unlock in both the system and the bootloader then use adb to push the recovery, superuser, and busybox to the system. King Root caused too many system instabilities, it had injected itself as a system app and after unrooting and uninstalling after a reboot I was left with a soft brick due to a secure boot error 1003. A stock 5.1.1 kdz and the lg flash tool was able to bring my Stylo back to life.
It could all be done by running a simple batch file bundled with everything we need for our device. Linux would probably be the better option but it could work the same in windows.
Hello and thanks in advance to everyone,
I am trying to root my moto g4 but I am stuck on installing a recovery. I did unlock the bootloader and when I turn on the phone i am greeted with"this device is unlocked and can't be trusted"
Yet when i try to flash the recovery it states that it failed to install since the package is unsigned:
C:\Users\Jelle\Desktop\Nieuwe map>mfastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (12496 KB)...
OKAY [ 0.405s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.344s]
finished. total time: 0.748s
Re-entering my unlock code also does not work as it gives me this message:
C:\Users\Jelle\Desktop\Nieuwe map>fastboot oem unlock NYRTWS*************
...
(bootloader) invalid boot state
OKAY [ -0.000s]
finished. total time: -0.000s
Does someone have any idea on what the issue is, am I missing something?
Thank you in advance!
Twrp is for motog4 plus aka athene. Make sure your device is the same.
Just reboot to recovery after you flash twrp using fast boot. Do not reboot your device to your home screen as your recovery partition will be rewritten with the stock recovery.
Do not worry about the message. It doesn't say that flashing failed. It only gives you a warning that it's not signed. That message is displayed even if you flash the stock recovery using fast boot.
Sent from my Moto G (4) using Tapatalk
Silesh.Nair said:
Twrp is for motog4 plus aka athene. Make sure your device is the same.
Just reboot to recovery after you flash twrp using fast boot. Do not reboot your device to your home screen as your recovery partition will be rewritten with the stock recovery.
Do not worry about the message. It doesn't say that flashing failed. It only gives you a warning that it's not signed. That message is displayed even if you flash the stock recovery using fast boot.
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
that totally worked! thank you very much
same problem mentioned above but after recovery mode my devicxe says no command.
help mw plzzz
sauravchandela95 said:
same problem mentioned above but after recovery mode my devicxe says no command.
help mw plzzz
Click to expand...
Click to collapse
If you're getting a screen with 'no command', that's the stock recovery on your device.
Are you rebooting to the recovery straight after flashing TWRP? Do you have an unlocked bootloader and what version of TWRP are you flashing? What commands are you using to flash?
You may wish to try booting with TWRP first:
1)On a device with an unlocked bootloader, boot to the bootloader screen.
2)Connect your device to your computer via a high quality USB data cable or the original USB cable.
3)Ensure your TWRP image is copied to your ADB folder.
4)Open an ADB terminal. Verify your device is communicating with your computer by typing 'fastboot devices' without quotes. Press Enter. You should get a serial number response.
5)If so, then type 'fastboot boot twrp.img' without quotes. Replace twrp.img with the actual full file name of your TWRP image in your ADB folder including the file extension. For example, if your TWRP image file name is shreps_twrp_3_1_1.img, the full command would be fastboot boot shreps_twrp_3_1_1.img You can type the first few letters of the file name and press Tab on your keyboard to automatically complete the file name if you so wish.
6)Press Enter, and your device should download TWRP and boot to TWRP.
I had previously rooted my Moto G4 Plus and used multiple custom ROMs before switching back to Stock firmware.
Now, I'm unable to flash TWRP on my device. Any attempts to flash TWRP ends up with the following error:
Code:
reboot bootloader
mfastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (12530 KB)...
OKAY [ 0.406s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.203s]
finished. total time: 0.608s
Any further tries to reboot via adb commands results in the following:
Code:
adb reboot recovery
error: device not found
adb reboot
error: device not found
adb reboot bootloader
error: device not found
The device says the bootloader is unlocked while rebooting. the ID field shows 'bad key'(I feel this is weird).
Can someone please help me with this?
Thanks
unknown_geek said:
I had previously rooted my Moto G4 Plus and used multiple custom ROMs before switching back to Stock firmware.
Now, I'm unable to flash TWRP on my device. Any attempts to flash TWRP ends up with the following error:
Code:
reboot bootloader
mfastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (12530 KB)...
OKAY [ 0.406s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.203s]
finished. total time: 0.608s
Any further tries to reboot via adb commands results in the following:
Code:
adb reboot recovery
error: device not found
adb reboot
error: device not found
adb reboot bootloader
error: device not found
The device says the bootloader is unlocked while rebooting. the ID field shows 'bad key'(I feel this is weird).
Can someone please help me with this?
Thanks
Click to expand...
Click to collapse
It has got flashed correctly as you got "OKAY" at end of command. Try to boot into recovery and tell us what happens.
1) That TWRP message of 'Image not signed or corrupt' is normal, since the TWRP custom recovery is not signed. After you see the [OKAY], reboot to recovery directly to fix the TWRP, else the stock recovery will overwrite it. Afterwards, you can boot as normal.
2)If you're still in the bootloader on your device, adb commands do not work - you need to use fastboot commands, or use your device volume keys to select 'Start' (to boot to system) or 'Recovery mode' (to boot to recovery) and press the power key to select. Of course, in this case, after flashing TWRP, you'll want to select 'Recovery Mode' in your bootloader and press the power key. This should then boot into TWRP.
If you find yourself in the bootloader in the future, then 'fastboot reboot' or 'fastboot continue' (both commands to be used without quotes, in the ADB terminal) may get your device rebooting to system.
3)ID Bad key is normal with an unlocked bootloader, on subsequent boots this may change to ID:N/A
echo92 said:
1) That TWRP message of 'Image not signed or corrupt' is normal, since the TWRP custom recovery is not signed. After you see the [OKAY], reboot to recovery directly to fix the TWRP, else the stock recovery will overwrite it. Afterwards, you can boot as normal.
2)If you're still in the bootloader on your device, adb commands do not work - you need to use fastboot commands, or use your device volume keys to select 'Start' (to boot to system) or 'Recovery mode' (to boot to recovery) and press the power key to select. Of course, in this case, after flashing TWRP, you'll want to select 'Recovery Mode' in your bootloader and press the power key. This should then boot into TWRP.
If you find yourself in the bootloader in the future, then 'fastboot reboot' or 'fastboot continue' (both commands to be used without quotes, in the ADB terminal) may get your device rebooting to system.
3)ID Bad key is normal with an unlocked bootloader, on subsequent boots this may change to ID:N/A
Click to expand...
Click to collapse
Hi @echo92,
Thanks for pointing out what I was doing wrong. I now realize that the TWRP recovery was being overwritten by stock recovery and I didn't know adb commands don't work while still in bootloader mode.
I did boot into recovery mode from the bootloader (using the volume buttons from the phone) and it worked.
And the ID: bad key is also gone and now it shows ID: N/A.
Thanks again for your help!
Regards
____Mdd said:
It has got flashed correctly as you got "OKAY" at end of command. Try to boot into recovery and tell us what happens.
Click to expand...
Click to collapse
Hi @____Mdd,
I rebooted into recovery right after flashing TWRP and it worked fine. Now, I'm able to boot into TWRP recovery.
Thanks for your response.
Regards.
Im Facing this issue while flashing TWRP
C:\adb>fastboot flash recovery twrp.img
(bootloader) has-slot:recovery: not found
(bootloader) is-logical:recovery: not found
Sending 'recovery' (12644 KB) OKAY [ 0.422s]
Writing 'recovery' (bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote: '')
fastboot: error: Command failed
Click to expand...
Click to collapse
vaibhavhr2010 said:
Im Facing this issue while flashing TWRP
Click to expand...
Click to collapse
Pre flash validation errors suggest that your bootloader is locked (i.e. you have not unlocked your bootloader, or it has been re locked). Can you confirm your bootloader is unlocked, e.g. if there is a warning screen on boot saying your device is unlocked?
echo92 said:
Pre flash validation errors suggest that your bootloader is locked (i.e. you have not unlocked your bootloader, or it has been re locked). Can you confirm your bootloader is unlocked, e.g. if there is a warning screen on boot saying your device is unlocked?
Click to expand...
Click to collapse
Thank You for the Reply!
Yes I have already unlocked the Bootloader.
The device status in Bootloader shows Device is Unlocked, Status Code: 3
vaibhavhr2010 said:
Thank You for the Reply!
Yes I have already unlocked the Bootloader.
The device status in Bootloader shows Device is Unlocked, Status Code: 3
Click to expand...
Click to collapse
Thanks, what device are you trying to flash TWRP to and which TWRP image are you using?
echo92 said:
Thanks, what device are you trying to flash TWRP to and which TWRP image are you using?
Click to expand...
Click to collapse
I'm Flashing my Moto G4 using the twrp-3.0.2-3-titan.
vaibhavhr2010 said:
I'm Flashing my Moto G4 using the twrp-3.0.2-3-titan.
Click to expand...
Click to collapse
That TWRP won't work, if it's for Titan. The codename for Moto G4/plus is athene, only TWRP images specifying athene in their name will work.
https://forum.xda-developers.com/mo...recovery-twrp-3-2-1-unofficial-touch-t3722206 or https://eu.dl.twrp.me/athene/ give these a try instead
I was so excited when I successfuly unlocked my bootloader on LG US997 running Oreo (US99721d with android security patch Dec 1 2018). The first thing I tried was TWRP. I downloaded the latest TWRP image from eliminater74's page. tobe more specific this one https://sourceforge.net/projects/twrp-recovery/files/US997/
I executed adb to flash twrp image. the logs are here
Code:
C:\Users\XXXX\Downloads\fastboot>adb reboot bootloader
* daemon not running; starting now at tcp:5037
* daemon started successfully
C:\Users\XXXX\Downloads\fastboot>fastboot flash recovery twrp.img
Sending 'recovery' (27800 KB) OKAY [ 1.174s]
Writing 'recovery' OKAY [ 0.236s]
Finished. Total time: 1.472s
C:\Users\XXXX\Downloads\fastboot>fastboot reboot
Rebooting
Finished. Total time: 0.016s
C:\Users\XXXX\Downloads\fastboot>
Everything looks fine. the issue starts when I go to recovery using the key combination. The device asks to wipe data twice, what is exactly what is supposed to happen, but instead of starting recovery. It erases all my data!
In other words, no TWRP image is installed. I jut lost plenty of data on my device because looks like recovery is untouched. I tried the other releases but none of them works.
What am I doing wrong? I want to install some mod on my G6 but without root and TWRP I can't
For TWRP to "stick" you must 1st boot into TWRP and not boot back into Android until you flash SuperSU or Magisk
Magisk updater installed Magisk & said it needed to make a change to continue the update. I clicked the Reboot button. The phone boots into TWRP. I reboot & it goes into TWRP. Repeat.
How can I recover, preferably w/o losing apps & most preferably w/o losing data like pics?
I'm using Android 9 rooted.
kamiller42 said:
Magisk updater installed Magisk & said it needed to make a change to continue the update. I clicked the Reboot button. The phone boots into TWRP. I reboot & it goes into TWRP. Repeat.
How can I recover, preferably w/o losing apps & most preferably w/o losing data like pics?
I'm using Android 9 rooted.
Click to expand...
Click to collapse
Backup>select data and internal storage>use a computer to move the backup file out
restore then
You can also try magisk uninstaller which comes with magisk on github(seach github magisk the uninstaller is in assets)
jjgvv said:
Backup>select data and internal storage>use a computer to move the backup file out
restore then
You can also try magisk uninstaller which comes with magisk on github(seach github magisk the uninstaller is in assets)
Click to expand...
Click to collapse
Good suggestions. Came back to phone & found battery ran out. Charged up & now it boot loops to fast mode only. Argh!
fastboot flash recovery twrp.img where the recovery image should be renamed 'twrp.img' and placed in the fastboot platform tools folder.
then
fastboot reboot recovery
jjgvv said:
fastboot flash recovery twrp.img where the recovery image should be renamed 'twrp.img' and placed in the fastboot platform tools folder.
then
fastboot reboot recovery
Click to expand...
Click to collapse
Tried 3 different cables including OnePlus. Same result.
fastboot boot twrp-3.3.1-x_blu_spark_v9.101_op6t.img
downloading 'boot.img'...
OKAY [ 0.867s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.876s
kamiller42 said:
Tried 3 different cables including OnePlus. Same result.
fastboot boot twrp-3.3.1-x_blu_spark_v9.101_op6t.img
downloading 'boot.img'...
OKAY [ 0.867s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.876s
Click to expand...
Click to collapse
Sorry. I see your rename note. Same result.
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.840s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.848s
I see the platform-tools note. I'm on Linux & the adb & fastboot tools are in /usr/bin, not a platform-tools folder.
Found one.
/usr/lib/android-sdk/platform-tools$ fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 0.881s]
booting...
FAILED (remote: Failed to load/authenticate boot image: Load Error)
finished. total time: 0.889s
hmmmmm
fastboot oem unlock (maybe device relocked when battery rn out)
I was able to get back to TWRP by switching slots. Backup fails because Data is encrypted & TWRP is not prompting for PIN. I'll try using the Magisk uninstaller tomorrow (past bedtime). Long shot.
Open to other approaches. Thanks for your help.
kamiller42 said:
I was able to get back to TWRP by switching slots. Backup fails because Data is encrypted & TWRP is not prompting for PIN. I'll try using the Magisk uninstaller tomorrow (past bedtime). Long shot.
Open to other approaches. Thanks for your help.
Click to expand...
Click to collapse
Facing the same authenticate error when trying to boot into twrp.img. I also don't know how useful twrp will be on the other slot if it can't decrypt the data from there so stuck at this stage too.
@kamiller42 Did you manage to resolve this with the Magisk uninstaller?
spinergist said:
Facing the same authenticate error when trying to boot into twrp.img. I also don't know how useful twrp will be on the other slot if it can't decrypt the data from there so stuck at this stage too.
@kamiller42 Did you manage to resolve this with the Magisk uninstaller?
Click to expand...
Click to collapse
Nope. I tried getting by by flashing just the boot image. It erased data & everything, so I flash Android 10 again & re-rooted.
kamiller42 said:
Nope. I tried getting by by flashing just the boot image. It erased data & everything, so I flash Android 10 again & re-rooted.
Click to expand...
Click to collapse
Did you flash all partitions?
Is there a way to only flash the boot partition, then boot into twrp.img, flash that, then reboot into recovery to decrypt the data? I care more about recovering my encrypted data than getting the phone working.
spinergist said:
Did you flash all partitions?
Is there a way to only flash the boot partition, then boot into twrp.img, flash that, then reboot into recovery to decrypt the data? I care more about recovering my encrypted data than getting the phone working.
Click to expand...
Click to collapse
That's what I thought. All was lost when I flash boot image. Technically, I flashed the fast boot partition from this post. https://forum.xda-developers.com/t/...t-stock-fastboot-roms-for-oneplus-6t.3862516/