Excellent news and a solution i havent found anywhere else yet!
Follow up from - https://forum.xda-developers.com/galaxy-s8/help/restore-imei-attempt-stock-rom-flash-t3802527
TL;DR attempted to re-root as soon as the bootloader unlocked. It all seemed to stick again, and got the big red message of doom again.
"Official Binaries Only" - Last time i was able to restore to at least switch on the phone to run down the rmm state timer to zero to flash again.
Tried the several methods of flashing through a locked bootloader (old BL file, quickly restart download mode and spam start on odin, etc) - literally nothing would allow me to flash anything that included the BL file. IMEI and baseband remained unknown. Phone went in drawer for a few days.
Just went and downloaded the latest XSA (Australia, Unbranded) build - https://www.sammobile.com/firmwares/galaxy-s8/SM-G950F/XSA/ and guess what boys and girls?
This sucker flashes straight away with Odin 3.13.1
It has completely restored my IMEI and baseband, i now have full Cell connectivity again, and its all back and working again. OEM unlock is still disabled, Samsung Pay still locked out which is fine, but otherwise, i have gone from brick to fully working Exynos S8 again.
TL;DR IF YOU HAVE ISSUES WITH A BRICKED PHONE BECAUSE IT WONT LET YOU FLASH ANY STOCK ROMS TRY THAT ONE.
Thanks for the replies to my other threads trying to help out with this. Much appreciated.
Peace out.
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
kratosjohn said:
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
Click to expand...
Click to collapse
Ive had a few cracks at this now but the date keeps resetting itself when you reset the phone despite having the automatic update option switched off.
Thanks for the info tho ill keep trying.
kratosjohn said:
For heads up for other after this, how to get OEM unlock to pop up again.
Go-to date and time, change the date to 8 days prior, disable automatic update of time.
Reboot phone and it may take a few tries, but OEM unlock should pop up again in developer settings.
Just went through all this without any help and it sucked lol. Thanks for making this thread for everyone.
Click to expand...
Click to collapse
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Ah I should have also mentioned I also did the same, flashed the same firmware when I was desperate and after some bit I also noticed prenormal change to official in download mode (the tell tale). I had OEM unlock on always, just was stuck in prenormal mode and couldn't flash anything.
To speed up the OEM unlock trial and error process do this as well:
1. After setting time/date back 8 days (and auto update time off). Go-to updates in settings, select manual update and check the server (it will error probably but that sets a check on their server to allow the RMM state to change next time it's connected properly).
2. Do this quite a few times, with reboot and constantly fighting the date auto update.
3. Flash the CRED firmware mentioned, boot it and setup once. Then reboot and go-to download mode.
4. You should see official as the RMM state now and you can happily OEM and flash away!
kratosjohn said:
Ah I should have also mentioned I also did the same, flashed the same firmware when I was desperate and after some bit I also noticed prenormal change to official in download mode (the tell tale). I had OEM unlock on always, just was stuck in prenormal mode and couldn't flash anything.
To speed up the OEM unlock trial and error process do this as well:
1. After setting time/date back 8 days (and auto update time off). Go-to updates in settings, select manual update and check the server (it will error probably but that sets a check on their server to allow the RMM state to change next time it's connected properly).
2. Do this quite a few times, with reboot and constantly fighting the date auto update.
3. Flash the CRED firmware mentioned, and reboot and go-to download mode.
4. You should see official as the RMM state now and you can happily OEM and flash away!
Click to expand...
Click to collapse
Have just flashed TWRP, used the Comsy version to be safe (3.13.1 fine for the stock rom flash) - I used comsy as it is mentioned in hte post OREO S8 update. It allows TWRP to be flashed but maybe thats whats breaking everything else. Ill try magisk next.
Fire up TWRP and enable system changes. FIRST - Advanced wipe and format system (Im 99% sure this is what screwed my last couple of roots), hit yes and do it. Reboot into recovery again.
Flash no-verity, then SuperSU (or your preferred root, i use Aroma installer first, THEN you have to flash the SuperSU binary with that)
Wipe dalvik etc. Reboot into system. As i type this its now in the 'Welcome' screen. Gimme a minute and ill check all is good.
UPDATE - Everything restored installed titanium backup root held. Rebooted phone aaaaaaaaand - "Only official released binaries are allowed to be flashed" - Back to square one. Will attempt same reflash now, but the root procedure kills everything. Back in download mode again. RMM State: Prenormal returned.
It is now succesfully flashing the stock rom in Odin 3.13.1 - Accidentally started it with Comsy and it DID NOT WORK. You MUST use the normal version to flash the rom im using.
Looks like we def have a stable way to refire up the phone again, and get around RMM state prenormal nice and quickly, so ill go ahead now and try and find whats going on with things breaking afterwards!
Thanks again guys.
Did nearly the same as you, dejavu.
I use magisk though. Be sure to flash a rom or kernel with RMM state fixed lol, or you'll be back here soon.
Funkmonkey said:
Have just flashed TWRP, used the Comsy version to be safe (3.13.1 fine for the stock rom flash)
Fire up TWRP and enable system changes. FIRST - Advanced wipe and format system (Im 99% sure this is what screwed my last couple of roots), hit yes and do it. Reboot into recovery again.
Flash no-verity, then SuperSU (or your preferred root, i use Aroma installer first, THEN you have to flash the SuperSU binary with that)
Wipe dalvik etc. Reboot into system. As i type this its now in the 'Welcome' screen. Gimme a minute and ill check all is good.
Click to expand...
Click to collapse
Someone should clean this up and get it stickied.
I imagine there are alot of users here with this same issue, after the CRED update we can't downgrade our bootloader, and in a panic you can get stuck here.
kratosjohn said:
Did nearly the same as you, dejavu.
I use magisk though. Be sure to flash a rom or kernel with RMM state fixed lol, or you'll be back here soon.
Looks like that wont be an issue any more to be honest this phone is now a backup thankfully so i can play around with it to my little hearts desire.
Im about to try the magisk install. SuperSU/Aroma definately breaking something somewhere. Or verity. I dont know but rooting the phone at the moment is killing it again.
Also, i have NOT lost IMEI or baseband this time. At the very least for Australian SN-G950F phones, this is a 100% flashable stock rom regardless of your RMM or phone status. I cannot say this for any other model in any other country on any other carrier, but this is all working for a carrier free Exynos S8.
Maybe y'all better archive the actual stock somewhere before someone realises theyve made a mistake somewhere and it gets pulled. Im definantly backing it up.
I just got that oem unlock trick to happen in 2 shutdown/restarts NOT reboots. BUT. I did NOT enable developer mode until i had disabled automatic time updates and turned the date back 8 days. The option came up instantly. Is something comparing a hardware clock deep in the system to a software clock in the os to and developer mode comparing something in between? Either way, on to reflash TWRP again now. This is a good day.
Click to expand...
Click to collapse
Hokay so - From a factory refresh, to the OEM unlock trick -
Flashing TWRP with 3.13.1 and allowing the phone to reboot - Phone will reboot as normal, TWRP doesnt stick. Shutdown and reboot into recovery gives you stock recovery.
Flashing but ensuring phone reboots directly into recovery gives you TWRP. A format data and reboot directly into twrp again lets me install no-verity.
- AFTER DOING THIS I AM GETTING THE RED LINE OF DEATH - Something in the system isnt letting the modifications stick.
Reflashing with the Home_CSC still seems to work as normal and i havent had to go through the welcome stuff this time...
Funkmonkey said:
Hokay so - From a factory refresh, to the OEM unlock trick -
Flashing TWRP with 3.13.1 and allowing the phone to reboot - Phone will reboot as normal, TWRP doesnt stick. Shutdown and reboot into recovery gives you stock recovery.
Flashing but ensuring phone reboots directly into recovery gives you TWRP. A format data and reboot directly into twrp again lets me install no-verity.
- AFTER DOING THIS I AM GETTING THE RED LINE OF DEATH - Something in the system isnt letting the modifications stick.
Reflashing with the Home_CSC still seems to work as normal and i havent had to go through the welcome stuff this time...
Click to expand...
Click to collapse
Have you found and used this after getting your phone setup right (w/twrp)?
I think you should flash magisk, then this after.
After I had this "panic" I flashed the custom rom I was aiming for (once RMM: Official). That rom has a kernel with the RMM state fixed/locked.
Maybe look for a custom kernel if you want root, I believe this is the fight we have to put up even on stock w/root.
Download the Australian stock rom and install it but do not recover IMEI or coverage. I think it's because my G950F (singlesim) cell phone thinks it's G950FD (double sim). This causes the cell phone to get confused and not recognize any imei or sim. Does anyone know how to fix it?
Funkmonkey said:
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Click to expand...
Click to collapse
Do we need to factory rest or just reboot phone after we change date?
Funkmonkey said:
Sunuva....
I havent been inside since i replied to you before. Gave up trying to fix that and was doing other things. Just reset both the s8 and s8+ to look at download mode... noticed the rmm flag was GONE rebooted and sure enough OEM Unlock is done.
You genius.
So - Anyone actuallly reading this -
Lost root, reflashed and cant install TWRP etc, "OFFICIAL BINARIES ONLY" crash, cant replace bootloader, missing IMEI/Unknown baseband -
TRY FLASHING XXU2CRED stock rom from 18/6/18 or later. This will flash despite a locked bootloader.
Once up and running set up the phone for use. Reboot as normal. Then turn off automatic time and date set date to 8 days prior, reset phone a couple of times. Get annoyed because you keep having to reset the date backwards. Reboot phone again and set automatic tin me and date again. Reboot. Bamf unlocked and completely restored SN-G950F.
Courtesy of Funkmonkey and @kratosjohn (the little legend)
Click to expand...
Click to collapse
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Smartphones13 said:
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Click to expand...
Click to collapse
I was stuck here too, flash the latest CRED firmware he linked.
Then boot it one time (setup til you see launcher).
Do the OEM unlock method.
You can follow the steps after if you want root.
I suggest magisk and a custom ROM, that had RMM state fixed (so you won't get locked again).
Good luck!
Smartphones13 said:
Can you please help me? so when you say reset phone you are talking about restarting it? I have tried this a few times and not working for me. My oem has always been unlocked, but still have prenormal
Click to expand...
Click to collapse
Sorry i missed your reply i hope you got it fixed if not post again and ill see if i can help. Ive definantly gotten that oem unlock trick working which is awesome but its fiddly. I dont think it works if you turn on flight mode and you have to let the phone fight you between 'no automatic date and time' and the network forcing the time.
Of course now i cant get the oem unlock trick working...
RE the dual sim issue... i think you would need the stock rom specific to your model try sammobile, see if there is a CRED release for your model. I cant guarantee it will work tho.
kratosjohn said:
I was stuck here too, flash the latest CRED firmware he linked.
Then boot it one time (setup til you see launcher).
Do the OEM unlock method.
You can follow the steps after if you want root.
I suggest magisk and a custom ROM, that had RMM state fixed (so you won't get locked again).
Good luck!
Click to expand...
Click to collapse
Thank you for your help, I am on the latest firmware now and into my Google and Samsung accounts. I am a little confused on the wording in the oem steps. I have tried it a bunch of times. Prenormal is still there, I already have the OEM unblocked, I can toggle OEM on and off but it doesn't change my rmm status. I am not sure what I am doing wrong.
Smartphones13 said:
Thank you for your help, I am on the latest firmware now and into my Google and Samsung accounts. I am a little confused on the wording in the oem steps. I have tried it a bunch of times. Prenormal is still there, I already have the OEM unblocked, I can toggle OEM on and off but it doesn't change my rmm status. I am not sure what I am doing wrong.
Click to expand...
Click to collapse
Thats exactly what im now struggling with. It absolutely did work twice but i cant get it to go now.
Heres the thing - both times i did it before, i would turn off automatic time and date and set the date backwards, then reboot the phone, when it reboots, automatic time and date were rechecked, and the date reset to now (hence the 'fighting with the date' comments) ... i think thats important, because now when i try it, automatic time and date stay OFF, the date does not reset, and i cant get the trick to work anymore. No amount of wifi/airplane/mobile data on/off seems to change owt.
If anyone reading has any ideas it would help.
Funkmonkey said:
Thats exactly what im now struggling with. It absolutely did work twice but i cant get it to go now.
Heres the thing - both times i did it before, i would turn off automatic time and date and set the date backwards, then reboot the phone, when it reboots, automatic time and date were rechecked, and the date reset to now (hence the 'fighting with the date' comments) ... i think thats important, because now when i try it, automatic time and date stay OFF, the date does not reset, and i cant get the trick to work anymore. No amount of wifi/airplane/mobile data on/off seems to change owt.
If anyone reading has any ideas it would help.
Click to expand...
Click to collapse
I see, so you suppose to set date back 8 days and turn off auto time and date and restart phone? When it comes back on to and set the date back to 8 days again? I thought you have to check the software? And then do those steps? So after I change the date back after that first restart, then what? Do I just turn OEM lock on and check download mode to see what the status is? I am not trying to be a pain o am just confused a little on the steps. Thank you for all your help
Smartphones13 said:
I see, so you suppose to set date back 8 days and turn off auto time and date and restart phone? When it comes back on to and set the date back to 8 days again? I thought you have to check the software? And then do those steps? So after I change the date back after that first restart, then what? Do I just turn OEM lock on and check download mode to see what the status is? I am not trying to be a pain o am just confused a little on the steps. Thank you for all your help
Click to expand...
Click to collapse
I think we might be looking at different issues.
This is to fix a semi bricked phone that has locked up its bootloader. In the past to resurrect a samsung all you had to do was flash twrp and your new rom but since Oreo some funkiness has been added to the system which only lets you flash a stock rom, (i.e. restoring a phone to factory settings and software) via ODIN/HEIMDALL then it locks up the bootloader for a week so you CANNOT flash anything into the phone that modifies the bootloader (i.e. TWRP OR *any* rom) until its timer runs out. This is most likely an anti theft feature esp with samsung and google pay use as it means there is no way to easily break into a stolen phone and use it as normal, and reflashing breaks all of the security features of the phone (e-fuse) - no knox no samsung or google pay no samsung pass as your device is insecure and could spoof false banking details etc.
The rom i linked to is important as it is a new AUSTRALIAN unbranded STOCK rom, that for some reason you can flash OVER a locked bootloader, meaning you can resurrect (australian at the very least) SN-G950F phones (exynos)
If you already have a working phone and can get to your developer settings then most of this thread is irrelevant to you.
Now - OEM unlock - You just bought a brand new galaxy from samsung (or youre me and you bought a MINT second hand one from cash converters for $700 less) - your phone is factory standard and schmicky. THE BOOTLOADER IS LOCKED. THE RMM STATE SHOULD NOT be triggered. If right now you went to flash something it would fail.
So you go to about phone - software information and you tap 'build number' seven times to unlock developer mode. Hit back twice and developer mode will be at the bottom of settings.
Click into this and you should see without swiping down 'OEM UNLOCK' - If you enable this, you can then reboot straight into download mode (power vol down and bixby) and flash twrp or whatever rom.
If you dont see this option, you either have a snapdragon model (youre **** outta luck permanently) or RMM is PRENORMAL and you either have to try the unlock trick(s) or leave your phone SWITCHED ON for 1 week and it will unlock itself.
The biggest issue at the moment is that i keep breaking something after i attempt to root so not sure whats happening there so use major caution.
Now as i said the trick posted above to unlock without having to wait a week (which i think youre asking about) im now not sure how it works because i cant get it to work any more.
Automatic time and date off, set date back 8 days, reset the phone. Do this a couple of times, then turn on automatic date and time again. HERE THERE BE ISSUES. When i first did it - i switch off time and date and change then reset, when the phone came on, auto date and time was on again. Turn off, change date, reset. Again, its back on. Turn off, change date, reset. Its back on. I give up and leave it, and notice later the option was available, so it worked. I broke the phone, reflashed again, did the trick in ONE reboot. Fcked something again, reflashed, now auto time and date stays off and the trick wont work so i cant help you with that until someone comes up with more info im sorry! Its a bit zarbis.
Im not going too nuts trying to fix it as i now have a fully working stock backup phone that sits on DeX plugged into my bedroom tv full time and im not into custom roms, root keeps breaking the phone, and ive sonce replaced it with a mint S8+ that im not even THINKING about considering rooting until its replaced maybe next year. Its not as easy to get around anymore and thankfully a) picasa and hangouts are no longer stock apps and can be banished and b) you can now disable all the other built in apps natively so its now a lot more bearable with a totally stock phone.
Hi, recently I accidentally bricked my Galaxy Tab A 10.1 with Spen (SM-P580) by accidentally disabling "OEM Unlock" in the developer settings while I had TWRP and a custom ROM installed. I was only able to get into download mode due to the factory reset protection lock, so I tried downloading the stock firmware online and then flashing it to bring the device back to fully stock firmware so I could get past the lock and not have a brick. Unfortunately, when I flashed the firmware, despite it seemingly being for my specific device (and matching my build number), I was no longer able to boot the device at all. It would turn on and would seem to immediately lose power, charging would turn on the flash and cause it to heat up, and no amount of charging would fix the issue. It was completely bricked and there was no way for me to go back into download mode to try flashing again or try flashing a different firmware. Thankfully, I contacted Samsung and because it's still under warranty they were nice enough to fix it for free, and did so by completely replacing the motherboard according to the repair slip, which is not something I would have been able to do.
My question is: How do I make a full backup of the stock firmware and recovery so if this somehow ever happens again where the FRP lock kills my device, I can reflash in download mode the original firmware that I know is 100% going to work with it and is correct? I don't want to gamble with potentially using the wrong firmware again, seeing as that gamble killed the thing.
The Model is SM-P580NZKAXAR. Based on the last part (XAR) and the fact that other non-sammobile sites listed the US wifi only firmware as XAR, I assumed "Cellular south (XAR)" was the correct firmware I needed which was obviously incorrect as it completely bricked the device. For this reason, I'm wondering if there's a way with software on windows or something to completely backup the existing stock firmware before I do anything, because I doubt Samsung would be so nice a second time, and I'd really rather not go through all this again. Obviously these websites get the original firmware that's flashable via download mode somehow, so I'd like to know how or if that's possible. Also before I went and downloaded the firmware I checked the Samsung desktop app that allows you to fix firmware issues but it said my device wasn't supported so it wasn't much help. I'd like to avoid installing any custom recoveries ahead of time as if something gets messed up there will be no way for me to actually boot into recovery as far as I'm aware, and the FRP lock will block me from reflashing the custom recovery or anything else that isn't stock. It goes without saying that if this is possible I'd like to do it without installing a custom recovery or rooting as I'd like to have a proper fully stock backup that isn't going to trip the FRP lock.
Also the way I accidentally disabled OEM Unlock was I simply toggled the developer options off and then back on in a slimmed down version of the stock rom, but in doing so it also reset the OEM unlock setting and I completely forgot to make sure it was still enabled. Next thing I know I go to reboot (was trying to figure out an issue with a usb device) and then the thing was FRP locked. Needless to say, it was something extremely simple and easy to do by accident. I also just checked the device and the build number matches the firmware that I downloaded, so I don't know if it was mislabeled or what but something was not correct.
So long story short I was intoxicated and for some reason disabled OEM in debugging then sometime later I restarted my tablet to get the frp binary locked. It has a custom rom with twrp I absolutely need the data off of this tablet and the only way I see is to reinstall the default os through Odin but that wipes the device I need a method to get the data off of the tablet or a method to bypass frp entirely it would be mighty appreciated if I could have some help
Why don't you try a backup in TWRP?
Reinstalling the stock firmware with Odin won't wipe the device.
slop_me said:
So long story short I was intoxicated and for some reason disabled OEM in debugging then sometime later I restarted my tablet to get the frp binary locked. It has a custom rom with twrp I absolutely need the data off of this tablet and the only way I see is to reinstall the default os through Odin but that wipes the device I need a method to get the data off of the tablet or a method to bypass frp entirely it would be mighty appreciated if I could have some help
Click to expand...
Click to collapse
It's difficult to say if you can keep your data. The binary FRP lock is quite different that the average FRP lock that's associated with the Google sign in. Usually whenever you trip the binary lock it's because some firmware was installed such as a Root or a ROM that was flawed or invalid. It's an overstacking of binaries and therefore you get a "Custom Binaries Blocked by FRP Lock" notification. I've had this problem on another varient of the Tab A, the Galaxy Tab A6 SM-T580. I have found about four diferent variations of this. You may not have turned off OEM because in Binary lock it will act like you have. Possible reason to think that is the way it acts in Download Mode where you can't seem to flash anything especially the official firmware. Sound familiar?
Version 1. If you try to go to Recovery you get redirected to a screen similar to the Download Mode. In the upper left are red lettered "Custom Binaries Blocked by FRP Lock.. Download Mode is accessable but won't initialize when trying to flash stock firmware. Binary 4 FRP Unlock file was accepted and flashed in by Odin3. Stock firmware installs afterwards.
Version 2. Device is stuck in bootloop. "Custom Binaries Blocked by FRP Lock" appears on Logo screen. Recovery and Download Modes are so far, useless. Binary 4 FRP Unlock used, no positive results. Binary U 4 used. Positive result. Stock firmware flashed in afterwards.
Version 3. "Custom Binaries Blocked by FRP Lock" appears on Download Mode which either stalls right after or fails to initialize. Binary 4 FRP Unlock and Binary U 4 yeild no positive results. (This ones on it's way to me).
Version 4. "Custom Binaries Blocked by FRP Lock appears on Recovery Mode. Download Mode useless. I'm currently following this one.
Solution: I don't know if the one I have will work, they may be device specific. Research for a "SM-T280 Binary 4 FRP Unlock" which I couldn't yet find.
Casper Young said:
It's difficult to say if you can keep your data. The binary FRP lock is quite different that the average FRP lock that's associated with the Google sign in. Usually whenever you trip the binary lock it's because some firmware was installed such as a Root or a ROM that was flawed or invalid. It's an overstacking of binaries and therefore you get a "Custom Binaries Blocked by FRP Lock" notification. I've had this problem on another varient of the Tab A, the Galaxy Tab A6 SM-T580. I have found about four diferent variations of this. You may not have turned off OEM because in Binary lock it will act like you have. Possible reason to think that is the way it acts in Download Mode where you can't seem to flash anything especially the official firmware. Sound familiar?
Version 1. If you try to go to Recovery you get redirected to a screen similar to the Download Mode. In the upper left are red lettered "Custom Binaries Blocked by FRP Lock..
Solution: I don't know if the one I have will work, they may be device specific. Research for a "SM-T280 Binary 4 FRP Unlock"
But I couldn't find one.
Here's my post, it may help.
https://forum.xda-developers.com/general/help/custom-binary-blocked-frp-lock-2019-t3979661
Click to expand...
Click to collapse
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.
ashyx said:
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.
Click to expand...
Click to collapse
I hate to argue with you but that wasn't so easy with mine. While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. Trial and error followed. The solve was first I had to flash in the Binary FRP Unlock and then I could flash in the firmware. With another device the owner tried the Binary Frp Unlock which didn't fix it. Later he flashed in the U4 Binary and that worked for him. I passed the info along to some others in the same predicament and it helped them. So I don't know what to tell you but what you're stating is not always applicable.
Casper Young said:
I hate to argue with you but that wasn't so easy with mine. While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. Trial and error followed. The solve was first I had to flash in the Binary FRP Unlock and then I could flash in the firmware. With another device the owner tried the Binary Frp Unlock which didn't fix it. Later he flashed in the U4 Binary and that worked for him. I passed the info along to some others in the same predicament and it helped them. So I don't know what to tell you but what you're stating is not always applicable.
Click to expand...
Click to collapse
Trust me, I have 3 of these devices. I've bricked them, frp locked them every possible way during development for this device.
The T580 is a different device and may be more difficult to bypass if and only if FRP has kicked in because of a device reset.
However for EVERY Samsung device that has simply had non stock software installed the only fix that's required is to install the stock firmware.
This is the case on all the Samsung devices I own and I have quite a few from lollipop to Pie.
ashyx said:
Trust me, [not happening!]I have 3 of these devices. I've bricked them, frp locked them every possible way during development for this device. [Well, umm. No, you haven't. And take a wild guess how many devices I have, like that matters.]
The T580 is a different device and may be more difficult to bypass if and only if FRP has kicked in because of a device reset. [Everytime you turn off the device it resets.]
However for EVERY Samsung device that has simply had non stock software installed the only fix that's required is to install the stock firmware. [You obviously have difficulties comprehending that I said otherwise]
This is the case on all the Samsung devices I own and I have quite a few from lollipop to Pie.
Click to expand...
Click to collapse
Wow, you're on a roll ain't ya? Hey ASHYX, dont misjudge me because of my stats you see here. Over a decade ago I was stacking ROMs into my HTC-G1. 3 decades ago I was an Electrical Engineer and Sonar Operator in the Navy. Let me tell you point blank, you're mistaken! Normally you would think you can just flash in stock OTA firmware into the device via Odin3 and you get to return to normal. Well that wasn't the solve for this. This was a new one to me also. If you think you're so right on what you say I'll be more than happy to point you in the direction of some XDA visitors, two of which are still Binary FRP locked. You can try telling them what you just told me and they'll probably call you a blooming idiot. No offense but you could try reading it properly which might help.
I said, [QOUTE] " While in Binary FRP lock I, along with a few others that have the SM-T580 or the SM-T585 couldn't use Download Mode to flash in the official stock firmware. [END QOUTE]
Take my word for it, the method you stated was already tried AND DID NOT WORK!
If you want to insist you're all that, here ya go, these people need your expertise in development
https://forum.xda-developers.com/ga...frp-locked-t3772512/post80420061#post80420061
Data loss when flashing stock firmware.
ashyx said:
Reinstalling the stock firmware with Odin won't wipe the device.
Click to expand...
Click to collapse
That depends on which stock firmware you're using. Typically what you get OTA (over the air) is the same as the 4File Official Stock Firmware. These are the 4 files that go into each section when using Odin3 to flash firmware. BL is for the Bootloader which controls security, start-up and recovery. AP is Android Partitioning, CP is Cellular Processor. Now let's talk about the CSC. file. The 4File contains two CSC files, one is listed as HOME CSC. If you flash the CSC file you will lose your App data. If you flash the HOME CSC you do not lose your App data.
Casper Young said:
That depends on which stock firmware you're using. Typically what you get OTA (over the air) is the same as the 4File Official Stock Firmware. These are the 4 files that go into each section when using Odin3 to flash firmware. BL is for the Bootloader which controls security, start-up and recovery. AP is Android Partitioning, CP is Cellular Processor. Now let's talk about the CSC. file. The 4File contains two CSC files, one is listed as HOME CSC. If you flash the CSC file you will lose your App data. If you flash the HOME CSC you do not lose your App data.
Click to expand...
Click to collapse
ashyx said:
Nothing needs to be done except install the stock firmware.
The device hasn't been reset so no need for any kind of bypass.
FRP has kicked in purely because unsigned software is installed.
Replace the unsigned software with stock and it'll boot just fine. Data fully intact.
Click to expand...
Click to collapse
Thank you for confirming I won't loss any data upon installing the original ROM I did just have a custom ROM installed I was super concerned that I would lose all the data upon installing the original ROM thank you so much <3
slop_me said:
Thank you for confirming I won't loss any data upon installing the original ROM I did just have a custom ROM installed I was super concerned that I would lose all the data upon installing the original ROM thank you so much <3
Click to expand...
Click to collapse
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.
ashyx said:
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.
Click to expand...
Click to collapse
Yeah it was just stock lollipop with a root. Will that cause an issue or am I good to continue?
ashyx said:
Depends on which custom rom you had installed? If it's stock based on lollipop then you should be fine. If its lineage then it may not boot without a data wipe.
Click to expand...
Click to collapse
Props to you thanks for the knowledge it worked flawlessly I mean kinda half way through it did say erasing and I kinda **** the bed and got scared because I really needed the data off of there but my man you are right just flashing stock ROM worked flawlessly everywhere online says it will wipe the device but it didn't. Thank you so much for your fantastic help <3
Purchased the phone off guy on Facebook. It appears that he wiped it without realizing about the FRP lock. It had 7.0 on it. I tried all the tricks you see on the youtube videos to bypass FRP but none of them worked. I know how to use ODIN and Z3X, so I flashed an 8.0 firmware thinking I would try some of the bypass methods for 8.0. Those didn't work so then I tried to move back to 7.0.....and then I learned that you can't downgrade bootloaders. In odin it would say Fused 10 > Binary 4, for example. To be clear, the firmware that I am on is G935UUESACSF1.
The next thing I tried was to load a combination firmware. I used G935AUCUAASF1. That allowed me to load up "Factory Binary" and within that firmware I have access to the settings menu and IMEI dialer. I went into the menu, enabled developer options, and made sure that USB debugging was enabled. There was no option for "OEM Unlock". I used the dialer to bring up USB settings and set it to MTP+ADB. Then I brought up Z3X 29.5 thinking I would use the FRP unlock feature there. The SM-935A does not have a feature for that, but the SM-935T and F models do. So I took a risk and pulled up the T model and I selected FRP Reset. It did it's thing and it said that it was successful. I followed the instructions to do a factory data wipe directly after.
I wasn't sure what to do next, so I put the phone back into download mode and used ODIN to flash the 8.0 firmware back on. When that booted up, nothing had changed..it was still FRP locked. I'm not sure if I'm missing something in the process or what I should do next, if anything can be done. It seems I'm very limited in what I can do because from what it seems, I can't downgrade to a lower bootloader binary so I can't, for example, go back to 7.0 or 6.0.1. I can't even go back to earlier versions of 8.0 and try some of the tricks for those (like the S Voice Terms and Conditions trick..S Voice isn't listed during startup on my firmware)...
Anything that I can do? Any help is appreciated.
Can you get into custom recovery? If you can, flash no verity opt encrypt and it will be fixed or if not, also flash RMM bypass
freakwithracket said:
Purchased the phone off guy on Facebook. It appears that he wiped it without realizing about the FRP lock. It had 7.0 on it. I tried all the tricks you see on the youtube videos to bypass FRP but none of them worked. I know how to use ODIN and Z3X, so I flashed an 8.0 firmware thinking I would try some of the bypass methods for 8.0. Those didn't work so then I tried to move back to 7.0.....and then I learned that you can't downgrade bootloaders. In odin it would say Fused 10 > Binary 4, for example. To be clear, the firmware that I am on is G935UUESACSF1.
The next thing I tried was to load a combination firmware. I used G935AUCUAASF1. That allowed me to load up "Factory Binary" and within that firmware I have access to the settings menu and IMEI dialer. I went into the menu, enabled developer options, and made sure that USB debugging was enabled. There was no option for "OEM Unlock". I used the dialer to bring up USB settings and set it to MTP+ADB. Then I brought up Z3X 29.5 thinking I would use the FRP unlock feature there. The SM-935A does not have a feature for that, but the SM-935T and F models do. So I took a risk and pulled up the T model and I selected FRP Reset. It did it's thing and it said that it was successful. I followed the instructions to do a factory data wipe directly after.
I wasn't sure what to do next, so I put the phone back into download mode and used ODIN to flash the 8.0 firmware back on. When that booted up, nothing had changed..it was still FRP locked. I'm not sure if I'm missing something in the process or what I should do next, if anything can be done. It seems I'm very limited in what I can do because from what it seems, I can't downgrade to a lower bootloader binary so I can't, for example, go back to 7.0 or 6.0.1. I can't even go back to earlier versions of 8.0 and try some of the tricks for those (like the S Voice Terms and Conditions trick..S Voice isn't listed during startup on my firmware)...
Anything that I can do? Any help is appreciated.
Click to expand...
Click to collapse
can you Kindly Share the stock rom you used. i am having the Same issues. Thank you in advance .
Edit 3: TL;DR: This is appears to be an S8 exclusive error, it's shown in the recovery:
"Product device tree not found, couldn't verify firmware" or something like that. For solutions, please look that up.
So, I bought a bootlooping S8 in the hopes of fixing it.
Since OEM and FRP lock are on, I went with installing Samsung firmware on it, as installing a custom recovery at this point is not possible.
The default recovery wouldn't work, so I wasn't able to know which firmware exactly to flash, because I couldn't find out which model exactly I have bought.
I do not know the carrier of the device either, but it should be from some german provider.
All of the firmwares I tried just bootlooped, but the recovery works again, except for ADB, which is quite unfortunate, and I have no idea why it fails, the device shows up when I'm in the recovery menu, but as soon as I activate ADB, it's gone from the list of connected devices.
Combination firmwares sometimes show some turning gears animations, but then crash with some, thought often memory related, pretty random crash issue.
Another problem I am now facing is that in the process of trying to find a working firmware I now upgraded the devices "binary level"? (forgot what exactly it was called) to 6, so I can't flash any older firmware or combination firmware than 6, since downgrading isn't allowed.
I received the device with either binary level 1 oder 2.
My theory is that I don't have the right firmware, since I keep seeing dm-verity and license errors...
I am happy to provide logs if necessary.
The goal is to have an unlocked bootloader/ custom recovery.
I literally am going INSANE over this FRP blocking me from flashing TWRP and being done with this in under 10 minutes, please help :c
PS: Some random info attached
Edit 1: With the IMEI code i found while opening the phone I now know my model number: SM-G950FZKADBT.
Any tips for finding the PDA code of the originally installed system? Or finding a matching firmware?
Is this even neccesary? Why do official firmwares not work for me? :c
Edit 2: Somewhat solution: I think the only way to recover this device would be to find it's firmware, which is just NOT to be found...
So, until a miracle happens I'm gonna keep reading "Firmware is not valid" errors in the log
Did you look in samfrew.com ? ? ? I just grabbed a fw from there.
The dnld was loooong so I purchased a privilege for faster speed . . .