Hi ..I am using idea blade(india branded zte blade),
I have tried to unlock the ram of my phone using tpt method....
But the procedure got stuck at 98%.
ANd when i restarted my mobile some irregular green lines appear on the screen and they never disappear.
Finally i hav tried to install the original stock rom....
For that,I have flashed stock recovery first to uninstall cwm recovery..and it worked fine
The cwm recovery tool has been uninstalled.
But now...when i try to istall the original stock ....it fails and gets stuck at FTP screen...
when i start my mobile normally,it automatically goes to FTP mode....
Iam searching for any solution since a week..but iam unable to find one...
Please help me in this regard.........
Thanks in advance ..........
Hey, really i need Yours help, I have a big problem with l7.
Phone is switched on only in emergency, or if i just turn the phone hangs on the LG logo.
I tried to fire up fastboot but jumps secure booting error.
CM10 previously installed according to the instructions in some forum, but did not work the mobile phone network, so I wanted to reinstall the factory soft by KDZ.
Unfortunately, the first attempt was unsuccessful, and now when trying to install any version of the system (V10K, V10a), the phone is detected at the begining, and installs soft, but after this, phone is restarting and freezes on LG logo, and the computer tries to install the driver for "MTP USB Devices" Unfortunately, the driver is not installed and the installation is not coming to an end.
I tried to install the phone in a mode other than CDMA and EMERGENCY, but there is an error in the system "model II msg not found" and the installation ends with the same result.
Mention that several times before installing the factory soft and there were no problems. Perhaps it is a matter of something that I installed on the phone with the CM10 (unlocking bootloader?)
After the installation process in KDZ upgrade error message pops up wparam: 100 lparam: 6
I will be very grateful for any help.
I'm sorry for my english if something is dificult to understand. Then i'll explane everything You need.
solved problem
When the L7 stuck on the LG logo, restart the process, run the file Flash_Bootloader.bat then Flash_Recovery.bat, then Reboot2Recovery.bat. When you get into Recovery Mode, do the restore files that you have done this before, or reinstall CM10 ..... that's all you need to do and your L7 will work again. I hope I helped .... Regards:fingers-crossed::fingers-crossed::fingers-crossed:
I think its communication problem when you flashing through KDZ. Try changing modem port of the phone wich is free and reflash it!
R: [Q] I brick my L7 Help needed
I had this problem too, just flash homero' s V10K and when it finishes DONT disconnect The phone from The PC,when phone is booting fire up terminal on your PC and write adb reboot recovery, Then when you are in CWM wipe data,cache, dalvik and reboot!
Sent from my LG-P700 using xda app-developers app
Hi all,
i have the same Problem, i install the V10K.kdz file
but the L7 freeze at the boot logo... i have no Idea...
i Flash also with this file---> homero' s V10K - the same effect freeze on the Boot logo
hope u can help me
:good: :good: :good:
DuckDagobert007 said:
Hi all,
i have the same Problem, i install the V10K.kdz file
but the L7 freeze at the boot logo... i have no Idea...
i Flash also with this file---> homero' s V10K - the same effect freeze on the Boot logo
hope u can help me
:good: :good: :good:
Click to expand...
Click to collapse
Just follow what I described in the post before yours,and your phone will boot
Hi,
thanks for your Comment :good::good:
I try it 100, but it doesnt work
i dont know, my the Problem is, can u make ah tutorial with Pic ??
or when u are German, can u send me ah PN ??
Greets
Yeah,I'll make a tutorial
Just posted the Thread in Android Development !
Hello everyone, I am hoping to get some help here as I think I really screwed up my device... (D802 International variant, 32GB)
I try to describe everything as detailed as possible:
I was on the newest Cloudy G2 2.2 ROM with KK basband and it was working fine.
Now I wanted back to crDroid so I decided to put a backup onto my phone (of crDroid) and restore it. (I overwrote the .twrp file in that process)
I must have forgot to wipe before restoring the backup and now after the LG boot logo an error message in the top left corner appears stating:
"boot certification verify"
Secure booting error
cause: "boot certification verify"
Seriously guys, I don't know what to do. I tried to enter download mode but windows did install the drivers and gave me plenty notifications of formating drives... I am really lost. Please somebody help me if possible...
TheTorontonian said:
Hello everyone, I am hoping to get some help here as I think I really screwed up my device... (D802 International variant, 32GB)
I try to describe everything as detailed as possible:
I was on the newest Cloudy G2 2.2 ROM with KK basband and it was working fine.
Now I wanted back to crDroid so I decided to put a backup onto my phone (of crDroid) and restore it. (I overwrote the .twrp file in that process)
I must have forgot to wipe before restoring the backup and now after the LG boot logo an error message in the top left corner appears stating:
"boot certification verify"
Secure booting error
cause: "boot certification verify"
Seriously guys, I don't know what to do. I tried to enter download mode but windows did install the drivers and gave me plenty notifications of formating drives... I am really lost. Please somebody help me if possible...
Click to expand...
Click to collapse
Enter Recovery mode and reflash...
Thanks for the reply but recovery mode is not accessible anymore. I've basically tried every button combination and I am not able to enter download mode either...
EDIT:
I fixed my phone! For everyone experiencing the same issue here is what I did. Please read the OP for a detailed description of the problem:
At first, watch the beginning of this video and check which type of brick you are experiencing.
https://www.youtube.com/watch?v=hQVTc2m6U-I
If you checked and you are a person having to deal with the quSUSB_BULK type of brick read the following post and watch the following video for clarification on what to do.
http://forum.xda-developers.com/lg-g2/general/unbrick-lg-g2-qhsusbbulkqualcomm-9006-t2939627
https://www.youtube.com/watch?v=_d5b_osUTug
After following the steps you should be able to access download mode and following this thread (http://forum.xda-developers.com/showthread.php?t=2432476) you should be able to flash the respective firmware for your device.
I hope that this tiny little guide may help someone and thank you for any support.
Hi,
I need help with my android smartwatch z3g.
It is with mtk 6572.
I tried to change my imei and wifi mac address for being able to install whatsapp as a second phone with the same account.
After reboot, the system stuck at the the opening logo and doesn't boot up.
I have a backup I made with mtk droid tools.
I tried to recover it using sp flash tool and the download to the watch succeeded but the problem haven't been solved. The watch still stuck at boot.
Is it because the imei was changed? if so, how can I fix it?
appreciate any help..
Wrong forum
Hi everyone, I have a samung note 4 (SM N910C) and while using it just went off and when turned back on is stuck on the Samsung galaxy logo and wont get past it, tried pulling battery and memmory card and all as soft tricks from google but is of no use, so tried flashing a stock rom and odin shows pass at the end but the phone wont get past the samsung logo, checked and found need to do a format and all through recovery but i cant get into recocery either, havng error message recovery is not seandroid enforcing, tried flashing twrp but still odin pass and the error persists..
Anyone could be of any assistance please? Is there any workaround for this issue? Thank you in advance for the help..
Hello? Anybody plz.
try the PC program Smart Switch, you may succeed to get the emergency firmware installed on it
this might help