TWRP does not start completely - LG G6 Questions and Answers

I'm trying to flash and start the TWRP. I've already done this once on a LG G6 (h870).
I downloaded TWRP from there: twrp.me/h870
Code:
OEM is unlocked:
fastboot getvar unlocked
unlocked: yes
Code:
fastboot flash recovery twrp-3.2.3-0-h870.img
Sending 'recovery' (21420 KB) OKAY [ 0.911s]
Writing 'recovery' OKAY [ 0.190s ]
After the flash, I start the recovery mode by pressing the button combination. After that I get the factory reset request, -> I choose 2x "yes".
The LG logo appears and then the splash screen of TWRP. But instead of getting into TWRP, the screen gets dark again and the phone restarts in the system.
I didn't find the same problem anywhere in a forum. Does anyone know what I can try to do to successfully start TWRP? Thank you for your help!

Unlocking again did the trick
trubadur2 said:
I'm trying to flash and start the TWRP. I've already done this once on a LG G6 (h870).
I downloaded TWRP from there: twrp.me/h870
Code:
OEM is unlocked:
fastboot getvar unlocked
unlocked: yes
Code:
fastboot flash recovery twrp-3.2.3-0-h870.img
Sending 'recovery' (21420 KB) OKAY [ 0.911s]
Writing 'recovery' OKAY [ 0.190s ]
After the flash, I start the recovery mode by pressing the button combination. After that I get the factory reset request, -> I choose 2x "yes".
The LG logo appears and then the splash screen of TWRP. But instead of getting into TWRP, the screen gets dark again and the phone restarts in the system.
I didn't find the same problem anywhere in a forum. Does anyone know what I can try to do to successfully start TWRP? Thank you for your help!
Click to expand...
Click to collapse
For whatever reason, this was the solution:
Code:
fastboot flash unlock unlock.bin

Good news ...
I had the same problem as you with TWRP 3.2.3 H870 and i finally used the "unofficial twrp" developped by RunningNak3d" ...
In other words, you unlocked your phone twice !!!
Did your unlock it a second time, then flashed the TWRP official again OR did you simply flash a second time the unlock.bin ?
And this way, do you still have the "infamous" WARNING screen about bootloader locked made in Google ?

Related

[Q] Continuous Reboot after OEM Unlocking

Hi Folks,
I'm kinda stuck here. Spent the lst 2 hours googling for a possible solution but no luck.
I've tried to OEM Unlock my OP2 to flash TWRP. When I typed fastboot oem unlock in cmd command, my phone started to reboot itself every 1 second.
I've installing the corect drivers using SDK Tools.
Please help as I'm not sure what else I can do.
Did you ticked under dev options allow oem unlock? Try to flash latest stock rom and then unlock.
acmerw said:
Did you ticked under dev options allow oem unlock? Try to flash latest stock rom and then unlock.
Click to expand...
Click to collapse
I did turn on OEM Unlock as well as USB Debugging. I've tried to unlock the bootloader using the app on this thread as well as via cmd command. In both scenarios the phone goes into continuos reboot cycle (every 1 sec). I'm able to boot into fastboot (it says Fastboot on the screen) by pressing and holding the power+volume up button.
I've tried flashing twrp or stock room with no success. Every time i try to flash something it says:
C:\Android>fastboot flash recovery twrp.img
< waiting for device >
target reported max download size of 536870912 bytes
sending 'recovery' (28144 KB)...
OKAY [ 0.808s]
writing 'recovery'...
FAILED (remote: device is locked. Cannot flash images)
finished. total time: 0.836s
C:\Android>
Any advise would be greatly appreciated!
Got it working again by using the following commands while in fastboot mode:
"fastboot continue"
Thanks to below thread.
http://forum.xda-developers.com/oneplus-2/help/boot-locked-bootloader-installing-twrp-t3229828

Root, Downgrade and install TWRP

For the last week I have been trying to root and install TWRP on my Huawei p8 Lite ALE21. Sofar every attempt has failed.
Steps taken:
Get Bootloader Code
Unlock bootloader with "fastboot oem unlock"
Flash TWRP with "fastboot flash recovery recovery.img"
Result:
When booting into recovery the default "Huawei eRecovery" opens, not TWRP
No app can detect root
Additional info:
TWRP form here: http://forum.xda-developers.com/p8lite/development/testing-twrp-2-8-7-x-huawei-p8lite-qcom-t3187758
Trying to debug the problem, I entered
Code:
fastboot getvar all
this returned
Code:
getvar:all FAILED (remote: Command not allowed)
Additional I have tried to downgrade to android 5.0 again, but after copying the Firmware to the "dload" folder and holding the Volume-Up and Down and Power buttons, the phone wouldn't do anything but show the huawei logo and turn off.
Any help would be very appreciated!
Thank you in advance,
Oisin
Oisins said:
For the last week I have been trying to root and install TWRP on my Huawei p8 Lite ALE21. Sofar every attempt has failed.
Steps taken:
Get Bootloader Code
Unlock bootloader with "fastboot oem unlock"
Flash TWRP with "fastboot flash recovery recovery.img"
Result:
When booting into recovery the default "Huawei eRecovery" opens, not TWRP
No app can detect root
Additional info:
TWRP form here: http://forum.xda-developers.com/p8lite/development/testing-twrp-2-8-7-x-huawei-p8lite-qcom-t3187758
Trying to debug the problem, I entered
Code:
fastboot getvar all
this returned
Code:
getvar:all FAILED (remote: Command not allowed)
Additional I have tried to downgrade to android 5.0 again, but after copying the Firmware to the "dload" folder and holding the Volume-Up and Down and Power buttons, the phone wouldn't do anything but show the huawei logo and turn off.
Any help would be very appreciated!
Thank you in advance,
Oisin
Click to expand...
Click to collapse
In order to boot in twrp recovery you should first remove your usb cable,once is done,press and hold volume up and power button,once you see huawei logo,release power button but keep press on volume up,about firmware witch build number do you have on your phone,share more info if you want a quick help
"No app can detect root"
TWRP isn't root
"fastboot flash recovery recovery.img"
Any error?
"....(remote: Command not allowed)"
i think you have to unlock bootloader
Thank you for you quick response!
Running "fastboot flash recovery recovery.img" returns
Code:
target reported max download size of 471859200 bytes
sending 'recovery' (27062 KB)...
OKAY [ 0.880s]
writing 'recovery'...
OKAY [ 2.084s]
finished. total time: 2.967s
I checked if the bootloader is unlocked with "fastboot oem get-bootinfo"
Code:
(bootloader) unlocked
OKAY [ 0.003s]
finished. total time: 0.003s
I also tried booting into recovery without the cable plugged it, but it still just booted into "eRocovery"
More info
Product: ALE-L21
Serial: W3D4C16916992523
Build: ALE-L21C432BB574
just try this:
1) (re) boot normally
2) attach to pc with usb cable
3) reboot into recovery using adb command: adb reboot recovery
ItalianWolf said:
just try this:
1) (re) boot normally
2) attach to pc with usb cable
3) reboot into recovery using adb command: adb reboot recovery
Click to expand...
Click to collapse
The phone reboots, shows the HUAWEI logo and then turn off again.
Sorry, i didn't read the post linked.
You need twrp 3.0.2 for B5xx, i was thinking you had the right one (2.8.7 works on kk and maybe lollipop), so here you are: http://forum.xda-developers.com/p8lite/general/twrp-3-0-0-0-p8-lite-kirin-t3343320
ItalianWolf said:
Sorry, i didn't read the post linked.
You need twrp 3.0.2 for B5xx, i was thinking you had the right one (2.8.7 works on kk and maybe lollipop), so here you are: http://forum.xda-developers.com/p8lite/general/twrp-3-0-0-0-p8-lite-kirin-t3343320
Click to expand...
Click to collapse
It worked! Thank you very very much! I spend sooo much time on this... wow thanks!

Unable to flash TWRP on Moto G4 Plus

I had previously rooted my Moto G4 Plus and used multiple custom ROMs before switching back to Stock firmware.
Now, I'm unable to flash TWRP on my device. Any attempts to flash TWRP ends up with the following error:
Code:
reboot bootloader
mfastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (12530 KB)...
OKAY [ 0.406s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.203s]
finished. total time: 0.608s
Any further tries to reboot via adb commands results in the following:
Code:
adb reboot recovery
error: device not found
adb reboot
error: device not found
adb reboot bootloader
error: device not found
The device says the bootloader is unlocked while rebooting. the ID field shows 'bad key'(I feel this is weird).
Can someone please help me with this?
Thanks
unknown_geek said:
I had previously rooted my Moto G4 Plus and used multiple custom ROMs before switching back to Stock firmware.
Now, I'm unable to flash TWRP on my device. Any attempts to flash TWRP ends up with the following error:
Code:
reboot bootloader
mfastboot flash recovery twrp.img
target max-sparse-size: 256MB
sending 'recovery' (12530 KB)...
OKAY [ 0.406s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.203s]
finished. total time: 0.608s
Any further tries to reboot via adb commands results in the following:
Code:
adb reboot recovery
error: device not found
adb reboot
error: device not found
adb reboot bootloader
error: device not found
The device says the bootloader is unlocked while rebooting. the ID field shows 'bad key'(I feel this is weird).
Can someone please help me with this?
Thanks
Click to expand...
Click to collapse
It has got flashed correctly as you got "OKAY" at end of command. Try to boot into recovery and tell us what happens.
1) That TWRP message of 'Image not signed or corrupt' is normal, since the TWRP custom recovery is not signed. After you see the [OKAY], reboot to recovery directly to fix the TWRP, else the stock recovery will overwrite it. Afterwards, you can boot as normal.
2)If you're still in the bootloader on your device, adb commands do not work - you need to use fastboot commands, or use your device volume keys to select 'Start' (to boot to system) or 'Recovery mode' (to boot to recovery) and press the power key to select. Of course, in this case, after flashing TWRP, you'll want to select 'Recovery Mode' in your bootloader and press the power key. This should then boot into TWRP.
If you find yourself in the bootloader in the future, then 'fastboot reboot' or 'fastboot continue' (both commands to be used without quotes, in the ADB terminal) may get your device rebooting to system.
3)ID Bad key is normal with an unlocked bootloader, on subsequent boots this may change to ID:N/A
echo92 said:
1) That TWRP message of 'Image not signed or corrupt' is normal, since the TWRP custom recovery is not signed. After you see the [OKAY], reboot to recovery directly to fix the TWRP, else the stock recovery will overwrite it. Afterwards, you can boot as normal.
2)If you're still in the bootloader on your device, adb commands do not work - you need to use fastboot commands, or use your device volume keys to select 'Start' (to boot to system) or 'Recovery mode' (to boot to recovery) and press the power key to select. Of course, in this case, after flashing TWRP, you'll want to select 'Recovery Mode' in your bootloader and press the power key. This should then boot into TWRP.
If you find yourself in the bootloader in the future, then 'fastboot reboot' or 'fastboot continue' (both commands to be used without quotes, in the ADB terminal) may get your device rebooting to system.
3)ID Bad key is normal with an unlocked bootloader, on subsequent boots this may change to ID:N/A
Click to expand...
Click to collapse
Hi @echo92,
Thanks for pointing out what I was doing wrong. I now realize that the TWRP recovery was being overwritten by stock recovery and I didn't know adb commands don't work while still in bootloader mode.
I did boot into recovery mode from the bootloader (using the volume buttons from the phone) and it worked.
And the ID: bad key is also gone and now it shows ID: N/A.
Thanks again for your help!
Regards
____Mdd said:
It has got flashed correctly as you got "OKAY" at end of command. Try to boot into recovery and tell us what happens.
Click to expand...
Click to collapse
Hi @____Mdd,
I rebooted into recovery right after flashing TWRP and it worked fine. Now, I'm able to boot into TWRP recovery.
Thanks for your response.
Regards.
Im Facing this issue while flashing TWRP
C:\adb>fastboot flash recovery twrp.img
(bootloader) has-slot:recovery: not found
(bootloader) is-logical:recovery: not found
Sending 'recovery' (12644 KB) OKAY [ 0.422s]
Writing 'recovery' (bootloader) Image size exeeded partition limits
(bootloader) Preflash validation failed
FAILED (remote: '')
fastboot: error: Command failed
Click to expand...
Click to collapse
vaibhavhr2010 said:
Im Facing this issue while flashing TWRP
Click to expand...
Click to collapse
Pre flash validation errors suggest that your bootloader is locked (i.e. you have not unlocked your bootloader, or it has been re locked). Can you confirm your bootloader is unlocked, e.g. if there is a warning screen on boot saying your device is unlocked?
echo92 said:
Pre flash validation errors suggest that your bootloader is locked (i.e. you have not unlocked your bootloader, or it has been re locked). Can you confirm your bootloader is unlocked, e.g. if there is a warning screen on boot saying your device is unlocked?
Click to expand...
Click to collapse
Thank You for the Reply!
Yes I have already unlocked the Bootloader.
The device status in Bootloader shows Device is Unlocked, Status Code: 3
vaibhavhr2010 said:
Thank You for the Reply!
Yes I have already unlocked the Bootloader.
The device status in Bootloader shows Device is Unlocked, Status Code: 3
Click to expand...
Click to collapse
Thanks, what device are you trying to flash TWRP to and which TWRP image are you using?
echo92 said:
Thanks, what device are you trying to flash TWRP to and which TWRP image are you using?
Click to expand...
Click to collapse
I'm Flashing my Moto G4 using the twrp-3.0.2-3-titan.
vaibhavhr2010 said:
I'm Flashing my Moto G4 using the twrp-3.0.2-3-titan.
Click to expand...
Click to collapse
That TWRP won't work, if it's for Titan. The codename for Moto G4/plus is athene, only TWRP images specifying athene in their name will work.
https://forum.xda-developers.com/mo...recovery-twrp-3-2-1-unofficial-touch-t3722206 or https://eu.dl.twrp.me/athene/ give these a try instead

Can't boot in twrp

Hi, i'm trying to root my redmi note 7 so first i need to boot in twrp in order to root my phone.
My problem is that i can't enter twrp:
I've unlocked bootloader and installed adb + enabled usb debugging. Then, i enter fastboot (adb reboot bootloader), i flash the recovery with twrp img, which works fine
C:\Users\Ailiganon\Desktop\redmi note 7 root tool\platform-tools>fastboot flash recovery twrp.img
Sending 'recovery' (65536 KB) OKAY [ 1.410s]
Writing 'recovery' OKAY [ 0.452s]
Finished. Total time: 1.928s
But then, when i want to enter twrp using VolumeUp+Power button, it simply boots the phone normally !!!
I've also tried using this command when in fastboot: fastboot boot twrp.img but it does nothing although in CMD, it shows the command worked fine:
C:\Users\Ailiganon\Desktop\redmi note 7 root tool\platform-tools>fastboot boot twrp.img
Sending 'boot.img' (65536 KB) OKAY [ 1.392s]
Booting OKAY [ 0.133s]
Finished. Total time: 1.584s
I can access recovery mode when i turn off my phone and simply use VolumeUp+Power button (not from fastboot) but since Xiaomi overwrites the recovery mode everytime it reboots, it just enters the regular redmi recovery menu and not twrp. Idk what to do else
I've used the twrp img from this video: www youtube com watch?v=r3R9kiBIx34 (i can't post url >.<) and i've tried another one on another website, but i think it was the same one since they had the same size.
Hope someone can help me ty
Orangenfox unpack, flash in Fastboot mode, don't restart, hold the recovery buttons and then flash the Orangenfox.zip in recovery mode
joke19 said:
Orangenfox unpack, flash in Fastboot mode, don't restart, hold the recovery buttons and then flash the Orangenfox.zip in recovery mode
Click to expand...
Click to collapse
I've unpacked orangefox, flash recovery.img in fastboot mode, and then i held the recovery buttons, but yet again, it just boots the phone and it's even worse cause it prompts me a password to access android that i dont fkin know. So i've had to reset the phone using "fastboot format userdata" command. I did it twice cause the first time i had a schema to unlock the phone so i've put a password instead but the second time it prompted me the password, i've put the password i've chosen to unlock the phone but it said "wrong password". So i don't know what password they ask, and i dont know why it appears only after flashing orange fox....
I've also tried with the command "fastboot boot recovery.img" with the same result as earlier
C:\Users\Ailiganon\Desktop\redmi note 7 root tool\platform-tools>fastboot flash recovery recovery.img
Sending 'recovery' (30488 KB) OKAY [ 0.659s]
Writing 'recovery' OKAY [ 0.216s]
Finished. Total time: 0.917s
What orangenfox said by cancel and format data?

LG h918 in bootloop with only fastboot available. Help!

Hi All,
I just followed the instructions to root my h918 and then successfully updated to h91820h. I then used the TWRP app to flash twrp, and the Magisk app to update Magisk. After that I rebooted from the Magisk app, and now my phone is stuck in a bootloop. I cannot get into download mode, or recovery mode, or the system. I can get into fastboot mode by trying to go into download mode (holding the volume down and plugginto a USB port ot the laptop.
It seems that T-mobile removed any commands from fastboot that will help me. If I try to "fastboot reboot emergency", it just bootloops. If I try fastboot boot a twrp image, I get:
Code:
fastboot boot twrp-3.4.0-1-h918.img
downloading 'boot.img'...
OKAY [ 0.667s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.686s
The command "fastboot reboot bootloader" boots to fastboot. The bootloader is indeed unlocked, but it looks like I'm stuck, because the LG fastboot doesn't allow anything to fix the brick.
Code:
$ fastboot getvar unlocked
unlocked: yes
finished. total time: 0.020s
I'm not finding any hope or help on Google. It seems if I can't boot into twrp or download mode, I'm toast, and I can't figure out how to boot into anything but the bootloader.
Does anyone have any suggestions on how to bring this phone back from the dead?
Thanks,
Rob
frohro said:
Hi All,
I just followed the instructions to root my h918 and then successfully updated to h91820h. I then used the TWRP app to flash twrp, and the Magisk app to update Magisk. After that I rebooted from the Magisk app, and now my phone is stuck in a bootloop. I cannot get into download mode, or recovery mode, or the system. I can get into fastboot mode by trying to go into download mode (holding the volume down and plugginto a USB port ot the laptop.
It seems that T-mobile removed any commands from fastboot that will help me. If I try to "fastboot reboot emergency", it just bootloops. If I try fastboot boot a twrp image, I get:
Code:
fastboot boot twrp-3.4.0-1-h918.img
downloading 'boot.img'...
OKAY [ 0.667s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.686s
The command "fastboot reboot bootloader" boots to fastboot. The bootloader is indeed unlocked, but it looks like I'm stuck, because the LG fastboot doesn't allow anything to fix the brick.
Code:
$ fastboot getvar unlocked
unlocked: yes
finished. total time: 0.020s
I'm not finding any hope or help on Google. It seems if I can't boot into twrp or download mode, I'm toast, and I can't figure out how to boot into anything but the bootloader.
Does anyone have any suggestions on how to bring this phone back from the dead?
Thanks,
Rob
Click to expand...
Click to collapse
How are you trying to boot into download mode, are you trying to do it via fastboot or the hardware buttons?
frohro said:
Hi All,
I just followed the instructions to root my h918 and then successfully updated to h91820h. I then used the TWRP app to flash twrp, and the Magisk app to update Magisk. After that I rebooted from the Magisk app, and now my phone is stuck in a bootloop. I cannot get into download mode, or recovery mode, or the system. I can get into fastboot mode by trying to go into download mode (holding the volume down and plugginto a USB port ot the laptop.
It seems that T-mobile removed any commands from fastboot that will help me. If I try to "fastboot reboot emergency", it just bootloops. If I try fastboot boot a twrp image, I get:
Code:
fastboot boot twrp-3.4.0-1-h918.img
downloading 'boot.img'...
OKAY [ 0.667s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.686s
The command "fastboot reboot bootloader" boots to fastboot. The bootloader is indeed unlocked, but it looks like I'm stuck, because the LG fastboot doesn't allow anything to fix the brick.
Code:
$ fastboot getvar unlocked
unlocked: yes
finished. total time: 0.020s
I'm not finding any hope or help on Google. It seems if I can't boot into twrp or download mode, I'm toast, and I can't figure out how to boot into anything but the bootloader.
Does anyone have any suggestions on how to bring this phone back from the dead?
Thanks,
Rob
Click to expand...
Click to collapse
im having the same problem, i dont have download more or twrp now, all i have is fastboot
i am going to assume going into download mode through fastboot is the only option for the two people posting for help here. from what i see from the posts, both hardware buttons sequence , or the plug in & down volume are the ONLY way to get to fast boot.
and fast boot is the only thing available on the phone.
i have labeled that a soft brick .
i asume one of the two help seekers have used the magisk 20.2 trap?
the release proved to be a problem , there is a tutorial on how to fix it.
i will go look for that and try to edit it into my responce later.
for now, are the two seekers already acomplished in this procedure?
TWRP Installation Tutorial for Linux Mint and Ubuntu users ยป AndroidGuru.eu
TWRP (Team Win Recovery Project) is an open-source custom recovery image for Android devices. It is a replacement for the stock recovery mode that is installed on most Android devices by the manufacturer. TWRP provides various advanced features and options that are not available in the stock...
www.androidguru.eu
20.2 problem notes and fix
Magisk 20.2 Kills LG V20 (All variants) Boot partition. Reverting to 20.1 fixes issue
So over in the LG V20 forum a lot of people are finding out that installing Magisk 20.2 throws the phone into Fastboot mode. https://forum.xda-developers.com/v20/help/direct-installing-magisk-update-wiped-t4028705...
forum.xda-developers.com
frohro said:
Hi All,
I just followed the instructions to root my h918 and then successfully updated to h91820h. I then used the TWRP app to flash twrp, and the Magisk app to update Magisk. After that I rebooted from the Magisk app, and now my phone is stuck in a bootloop. I cannot get into download mode, or recovery mode, or the system. I can get into fastboot mode by trying to go into download mode (holding the volume down and plugginto a USB port ot the laptop.
It seems that T-mobile removed any commands from fastboot that will help me. If I try to "fastboot reboot emergency", it just bootloops. If I try fastboot boot a twrp image, I get:
Code:
fastboot boot twrp-3.4.0-1-h918.img
downloading 'boot.img'...
OKAY [ 0.667s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.686s
The command "fastboot reboot bootloader" boots to fastboot. The bootloader is indeed unlocked, but it looks like I'm stuck, because the LG fastboot doesn't allow anything to fix the brick.
Code:
$ fastboot getvar unlocked
unlocked: yes
finished. total time: 0.020s
I'm not finding any hope or help on Google. It seems if I can't boot into twrp or download mode, I'm toast, and I can't figure out how to boot into anything but the bootloader.
Does anyone have any suggestions on how to bring this phone back from the dead?
Thanks,
Rob
Click to expand...
Click to collapse
ok i found a way to get into twrp (if ever installed)
1- turn off your phone
2- hold Volume Down + Power button until you see the LG logo
3- When you see the Logo release the power button while still holding the volume down and immediately after release press power button 3 times.
4- you will see a factory reset screen, press yes twice and it will go to twrp.
NOW WE NEED TO FIND A WAY TO FLASH A WORKING ROM THRU TWRP

Categories

Resources