Hello all. I wanted to see if anyone could post the build number to the Galaxy S10+ for AT&T (preferably a screenshot). I flashed an update that wasn't for this phone, it worked after a factory reset but when the Odin files hit I'd like to flash back to the original firmware and update again once AT&T releases the update. Thanks in advance.
Sent from my SM-G975U using Tapatalk
@TechSilver13 Here is a screenshot of the US variant for At&t.
Related
Hi Guys,
I need some advice. I have a Canadian Galaxy Note 3 which I flashed to the Note 4 Port Evolution 3.0 (SM-N900W8)
It is now showing that its a SM-N900T due to the flash.
I have sold the phone but needs to restore it to stock before I can hand it over.
Can someone please help simplify this process. It has been some time since doing this.
Thank you in advance.
Cheers.
Download the latest sock rom from sammobile.com and flash it via Odin, then perform a factory wipe in stock recovery, and the phone should be back to the factory settings.
Audit13,
Thank you for your reply. I was not able to find a firmware for Rogers on Sammobile.com
The latest firmware (top of page) is for Columbia. I did not find one for Rogers in Canada. I assume I cannot use the Columbia firmware.
I know this maybe simple stuff for some guys that is familiar with this. Let me know if I need to find a specific firmware for the Rogers Carrier.
Thanks.
Rogers never had the 900t. All Canadian models are sm-n900w8.
Hi,
New to the Forum but hoping that someone can help me. I apologize if there is already a thread regarding this issue.
I have a Samsung Galaxy S5 Active which I purchased off Amazon Unlocked. It is an At&t phone but I am using it in Canada on the Bell Network. I have been unable to get any updates and therefore am still running Kitcat 4.4.2.
I have downloaded the Bell Firmware but Keep Getting the Error Message "Secure Check Fail Aboot" Immediately after each attempt.
I have not been able to find an updated At&t firmware to load and as far as I can tell the Bell Marshmallow Update won't work because My Build version is G870AUCU1A..... Where as the Bell Build Version is G870WVLU1C.......
Is there a way to install this Bell Firmware on my phone ?
AT&T has only released one firmware and the rest of the updates have been ota secure check fail means you are trying to flash the wrong firmware so no it can't be flashed in odin
Sent from my SM-G900V using Tapatalk
---------- Post added at 02:24 PM ---------- Previous post was at 02:22 PM ----------
You would have to flash g870a AT&T firmwares if you can find one
Sent from my SM-G900V using Tapatalk
I feared that might be the case I have a lot of hoping that someone had downloaded the OTA however I have been unable to find an AT&T update I am not far from the border if I went to cross into the US would I be able to get the OTA update or would I need an AT&T SIM card as well
This page may be helpful especially look at Samsung kies method
http://thunderztech.com/install-and...alaxy-s5-active-sm-g870a-manually-using-odin/
Sent from my SM-G900V using Tapatalk
Cool thank you
Hello guys..
I bought an unlocked AT&T S8 SM-G950U and the biggest problem i am facing now is with software update, my device is unable to fetch any updates from at&t.
I contacted At&t support and they in order to receive updates you got to have a at&t connection or else you'll not receive any updates. No manually dowloadable updates are also not avilable. They suggest to contact samsung service center.
My bootloader is also locked as its an Snapdragon US variant, please can anyone tell me that i can flash samsung stock rom on my s8 or not?? and how to do it? Or any other say to download at&t update?
parkarintl said:
Hello guys..
I bought an unlocked AT&T S8 SM-G950U and the biggest problem i am facing now is with software update, my device is unable to fetch any updates from at&t.
I contacted At&t support and they in order to receive updates you got to have a at&t connection or else you'll not receive any updates. No manually dowloadable updates are also not avilable. They suggest to contact samsung service center.
My bootloader is also locked as its an Snapdragon US variant, please can anyone tell me that i can flash samsung stock rom on my s8 or not?? and how to do it? Or any other say to download at&t update?
Click to expand...
Click to collapse
If you have an unlocked S8, then update will come from Samsung directly and not AT&T. Do you really need AT&T's updates?
1) When you check for update, what do you get?
2) Also what is the build # that your phone has at the moment?
Go to the at&t S8 forums. Firmwares and instructions are posted there. I even linked to the latest Odin firmware if you search my posts.
Charkatak said:
If you have an unlocked S8, then update will come from Samsung directly and not AT&T. Do you really need AT&T's updates?
1) When you check for update, what do you get?
2) Also what is the build # that your phone has at the moment?
Click to expand...
Click to collapse
No i dont want AT&T updates but i received it with AT&T firmware. Everytime i do update it stucks and after a while it shows that your software is up to date and dont check for uodates for next 24 hours.
Please check attached screenshot.
parkarintl said:
No i dont want AT&T updates but i received it with AT&T firmware. Everytime i do update it stucks and after a while it shows that your software is up to date and dont check for uodates for next 24 hours.
Please check attached screenshot.
Click to expand...
Click to collapse
Yes, you are able to flash unlocked Samsung firmware on your device. Read this and ask questions on that tread:
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
I believe you should be fine by doing flashing from section 1: Standard flashing.
joe3681 said:
Go to the at&t S8 forums. Firmwares and instructions are posted there. I even linked to the latest Odin firmware if you search my posts.
Click to expand...
Click to collapse
I was using iphone from last 4 years and i just bought S8 because its really beautiful so u can take me as a newbie. It all really confusing.
It would be really kind of you if you'll just point me out which one to flash as i only need stock firmware on my S8 and all support from samsung.
parkarintl said:
I was using iphone from last 4 years and i just bought S8 because its really beautiful so u can take me as a newbie. It all really confusing.
It would be really kind of you if you'll just point me out which one to flash as i only need stock firmware on my S8 and all support from samsung.
Click to expand...
Click to collapse
All firmwares for G950U are here. Some are branded some are unlocked. Choose the unlocked one. Do you need full steps?
callumbr1 said:
All firmwares for G950U are here. Some are branded some are unlocked. Choose the unlocked one. Do you need full steps?
Click to expand...
Click to collapse
Thanks for replying.
Yeah sure it'll be really helpful. If ull guide me out.
Facing the same problem, did you find a solution parkarintl?
Download the G950U1 firmware and install it. Should have all the features, no bloat, and faster updates.
Go to Updato.com and search for firmware for G950U1. Download the fw for the XAA variant. Extract all the files, remove .md5 off the end of all the files, flash them with modded Odin. You'll be on fully unlocked firmware and you'll receive future carrier free unlocked updates.
Latest fw: (QH3)
http://updato.com/firmware-archive-select-model?record=315444A78DDE11E7963AFA163EE8F90B
Modded Odin:
http://d-h.st/gsDA
---------- Post added at 08:44 AM ---------- Previous post was at 08:41 AM ----------
parkarintl said:
I was using iphone from last 4 years and i just bought S8 because its really beautiful so u can take me as a newbie. It all really confusing.
It would be really kind of you if you'll just point me out which one to flash as i only need stock firmware on my S8 and all support from samsung.
Click to expand...
Click to collapse
I got you. Look above
You still on qc9, it wont update unles you use Odin to update manually. I had one s8 like this before..
fred_yo said:
You still on qc9, it wont update unles you use Odin to update manually. I had one s8 like this before..
Click to expand...
Click to collapse
It won't update. He's not on ATT, not an att sim.
Just sharing the latest galaxy tmobile rom.
G935TUVS4BQL2 - Galaxy S7 edge SM-G935T TMB USA (T-Mobile)
Don't mind the version of Odin that it's rar'd with as I used it to flash my ATT phone to a Tmobile phone as I recently switched. Just couldn't find the stock rom anywhere so decided to share it with those who needed it.
https://mega.nz/#!K5sjEZqD!lsVxFTC74HnQTPNi8SRyxu0vNMnqLBXrQIv9P_zUFkQ
jlw_4049 said:
Just sharing the latest galaxy tmobile rom.
G935TUVS4BQL2 - Galaxy S7 edge SM-G935T TMB USA (T-Mobile)
Don't mind the version of Odin that it's rar'd with as I used it to flash my ATT phone to a Tmobile phone as I recently switched. Just couldn't find the stock rom anywhere so decided to share it with those who needed it.
https://mega.nz/#!K5sjEZqD!lsVxFTC74HnQTPNi8SRyxu0vNMnqLBXrQIv9P_zUFkQ
Click to expand...
Click to collapse
Thanks for the download.
Do you have a MD5 for your download?
Mine from Sammobile was different for the same item and wanted to know If you had a check for the download.
What's the change notes from BQJ2 to BQL2 ?
cyaclone said:
Thanks for the download.
Do you have a MD5 for your download?
Mine from Sammobile was different for the same item and wanted to know If you had a check for the download.
Click to expand...
Click to collapse
I do not have MD5. Honestly I'm not even sure how to pull that. This is a direct download from Sammobile.
I selected the top link here
https://www.sammobile.com/firmwares/galaxy-s7-edge/SM-G935T/
Official release.
THANK YOU! My edge is rebooting about every minute after doing an OTA update (F6, June!) and I was having a lot of trouble finding downloads that weren't 10 hours.
sm-g975u unlocked att phone wanting to change to tmobile. I have a tmobile sim and had originally plugged this in. The phone works fine but I recently noticed it has no Ota updates occurring. I would like to load tmobile firmware on it to enable some of the tmobile features as well but primary concern is ota updates.
the service provider sw ver.
SAOMC_SM-G975U-OYN-AT-PP-0033
ATT/ATT/ATT
BUILD NUMBER
PPR1.180610.011.G975USQS1ASD9
Ap/CP:G975USQS1ASD9
Csc:G975UOYN1ASD9
Last update may 2019
When I try says fully updated when I put it on samsung switch it says fully updated
Can this be done?
What firmware do you suggest?
Csc *#272imei#(may have that wrong) but is recognized and does work not sure when and what to use here, many options.
Also, not sure of the answer here, but if I run an update or csc change (the phone is unlocked) would it require me to unlock it again for any reason?
I am trying to get the phone close to a tmobile if that is possible
Thank you in advance if i need to give more info please let me know.
Since you have a t mobile SIM card, now all you need is the patched version of Odin, the latest t mobile firmware from sam firm, and maybe (not sure) Samsung switch. You might also need drivers for your PC to recognize your phone. This was done using Samsung Kies back in the S3 and S4 days, not sure if it or some other program is needed for the S10.
Sorry new to this which patched version of Odin? Like what number?
Also, just the latest version of tmb?
Country/Carrier
Date
USA (T-Mobile)
2020-08-13
Version
PDA
10
G975USQS4DTG1
CSC
G975UOYN4DTG1?
It doesn't matter that I am upgrading from G975UOYN1ASD9?
Sorry super new to this.