Related
Hi,
I've searched for several hours now in these forums and on Google, with no success.
I need an app that leaves the device switched on, but powers off the screen.
In settings/power I can dim the screen, but there is no setting to dim it completely or just switch it off.
I've found screensavers that can show a blank screen, but the screen is still actually powered up, just showing a black image presumably.
I've found apps that can switch off the screen. But you have to manually click on them to switch off the screen.
Does anyone know of a screensaver that after a set interval will leave the device running, but power off the screen please?
Suspend is no good, the device must be up and running apps.
Thanks for your help.
ClearOutLoft said:
Hi,
I've searched for several hours now in these forums and on Google, with no success.
I need an app that leaves the device switched on, but powers off the screen.
In settings/power I can dim the screen, but there is no setting to dim it completely or just switch it off.
I've found screensavers that can show a blank screen, but the screen is still actually powered up, just showing a black image presumably.
I've found apps that can switch off the screen. But you have to manually click on them to switch off the screen.
Does anyone know of a screensaver that after a set interval will leave the device running, but power off the screen please?
Suspend is no good, the device must be up and running apps.
Thanks for your help.
Click to expand...
Click to collapse
What apps are you trying to "keep running"? The only thing that might be an issue when the screen goes into it's normal sleep mode is that audio will stop outputting, and wifi connections will suspend, but there's cabs available here to easily get around both of those (and keep them going even when the screen shuts off).
Well, it's actually to solve another long-running problem that has made me almost lose the will to live....
Alarms don't go off reliably on my TP2.
Sometimes, randomly, the alarm doesn't go off until I press the power button to wake it up. The the alarm instantly goes off. So, if I set an alarm for 6am, sometimes the phone wakes up and the alarm sounds, sometimes not. And if I switch the phone on manually sometime later, at 6:15 say, the 6am alarm sounds then.
It will work fine for a few days, then fail.
It happened on WM6.1 and still continues after upgrading to WM6.5.
I have spent countless hours googling and searching XDA-Dev. I have tried probably ten different alarm apps, with no luck. I have hard-reset various times. I have tried various recommended registry tweaks. I've tried checking the notification queue regularly for any errors. I've tried so many different suggestions, for example, never pressing the power button to turn the phone off, only ever let it hibernate automatically. Warm-resetting it each day. And the list goes on.
So, I'm experimenting with just leaving the phone on forever. But turning the screen off at night to save power / not shorten the life of the screen hardware.
Which leads me to the question about screensavers which actually power off the screen automatically after a set delay. Just like a normal screensaver on a PC.
It's hard to easily convey the frustration I have for the TP2. An excellent phone. But a phone which I can't trust to do the simplest thing: to wake me up in the morning?
It'll end up in the bin at some point very soon now.....
A suggestion
Hi,
In my opinion there must be an application, change or customisation that is leading you to those problems. My suggestion is, to perform a sync towards any computer or server to keep your contacts, then, hard reset and keep the phone with the factory defaults for a while. Then, test the phone's alarms and if all is okay, add one by one your applications and changes, testing the alarms in between. Please do that on the official ROM (whatever 6.5 or 6.1) but official one. You will flash if needed later on.
I know it will be a pain, but you will find the problem.
I am using a TP2 with stock WM6.5 ROM. I have not had yet any issue with the alarms. However, I remember to have had those kind of problems before with WM 5.0 and 6.1. There were always related to freeware applications, customisations, no official ROMs, registry hacks and restored backups done from older builds upon upgrade. The alarm bug in old WM version was also known, but I have not experienced it on newer versions.
There can be some issues with the notification database by times, but as said above, it is almost every time due to customisations.
I am not saying that we should keep our phones without applications, third party software, cooked ROMs, customisation etc. But the goal is to find out what is the reason, and believe me. It is the best if not only way.
If you post the list of applications and hacks that you have in your phone, I can try to see if there is any I could identify like guilty one, based on my own experience.
Complementary, I recommend you to install and use these two applications in attachment. They have worked for me on WM5, 6, 6.1 and 6.5 so far. They are freeware and therefore you can use them without problems.
Good luck!
Thanks for taking the time to reply. All very good advice. I'll have a go when I've got some free time again. In the meantime, has anyone come across a screensaver that actually powers off the screen please?
Thanks again.
ClearOutLoft said:
Well, it's actually to solve another long-running problem that has made me almost lose the will to live....
Alarms don't go off reliably on my TP2.
Sometimes, randomly, the alarm doesn't go off until I press the power button to wake it up. The the alarm instantly goes off. So, if I set an alarm for 6am, sometimes the phone wakes up and the alarm sounds, sometimes not. And if I switch the phone on manually sometime later, at 6:15 say, the 6am alarm sounds then.
It will work fine for a few days, then fail.
It happened on WM6.1 and still continues after upgrading to WM6.5.
I have spent countless hours googling and searching XDA-Dev. I have tried probably ten different alarm apps, with no luck. I have hard-reset various times. I have tried various recommended registry tweaks. I've tried checking the notification queue regularly for any errors. I've tried so many different suggestions, for example, never pressing the power button to turn the phone off, only ever let it hibernate automatically. Warm-resetting it each day. And the list goes on.
So, I'm experimenting with just leaving the phone on forever. But turning the screen off at night to save power / not shorten the life of the screen hardware.
Which leads me to the question about screensavers which actually power off the screen automatically after a set delay. Just like a normal screensaver on a PC.
It's hard to easily convey the frustration I have for the TP2. An excellent phone. But a phone which I can't trust to do the simplest thing: to wake me up in the morning?
It'll end up in the bin at some point very soon now.....
Click to expand...
Click to collapse
do you turn your ringer to silent or vibrate when you go to bed? if so,
go to start/settings/clocks&alarms/more and make sure that the "sound alarms box" is checked. this will make sure that even if your phone ringers/alerts are off, your alarm will ring. also, if you charge your phone while you sleep, go to the backlight settings and uncheck the "turn screen off on ac power" box. if you cant sleep with the phone light on, set it to max dim on ac power and flip it over. i always had this issue when i had the tmobile wing.
ClearOutLoft said:
Hi,
I've searched for several hours now in these forums and on Google, with no success.
I need an app that leaves the device switched on, but powers off the screen.
In settings/power I can dim the screen, but there is no setting to dim it completely or just switch it off.
I've found screensavers that can show a blank screen, but the screen is still actually powered up, just showing a black image presumably.
I've found apps that can switch off the screen. But you have to manually click on them to switch off the screen.
Does anyone know of a screensaver that after a set interval will leave the device running, but power off the screen please?
Suspend is no good, the device must be up and running apps.
Thanks for your help.
Click to expand...
Click to collapse
S2U2 on this forum.
try g alarm.it worked perfect for me with tilt
I have similar Issues with my TP2;
I notice that it is more to do with HIBERNATING than screen off.
My TP2 has go to the point where allowing it to go to hibernation means Screen of Death.
Overnight I charge it and do not let the screen go off and it seems ok (so far).
Guess I will have to Hard reset and test my freeware.
Cheers
G
I had the exact same problem. When the phone goes to sleep, it is ASLEEP. I didn't use the alarm too much but the phone would never notify me when SMS arrived. I'd hit the power switch to check, and bam, three messages arrive at once, some from hours ago. Immensely frustrating, but the problem went away when I installed Energy rom.
How do I resolve this? Am I creating a problem or?
The other day I used the side https://www.windowsphone.com/en-US/find and tried to give functions Lost your phone? We can find it for you! Everything was ok! After two days I checked again, but now we give to the picture (windows.jpg). Can someone send me where to look for the programs of something or I 'm screwed
I never booked marked it, just signed into my live.com account clicked on "Devices" from the top left when you hover the mouse over "Windows Live" and it should show up there. But this is what the site shows up to me as now:
https://devices.live.com/
Is it possible that when I check how it works ( ring, lock, or erase your phone ) that I messed something and now you can not use that option.
in order for this picture when I go to Change Windows Phone 7 setting of switch me to that previous file
Oops...
Something went wrong and we can not show you this page right now.
Go to windowsphone.com
Is it possible that I am something in the phone or in checks or something messed up...
Oh, right. You do have to enable it on your phone first.
Settings > Find My Phone
You also have to have a live (ie hotmail or msn) account on the phone.
But you also might need to re-add it on the live.devices.com. I know after I flashed it, it didn't recognize my phone so I just hit "add a phone" on the devices page. It sends a text to the phone and then you should be good.
Hey, after I installed Rataplan v6.0 and tried to activate "Find my phone" in settings > find my phone, it says "Re're still setting up Find My Phone. This will take another moment or two to finish. Come back later to make sure it's been set up, then visit windowsphone.com to use it." It's been saying this since I installed the ROM. What should I do?
EDIT: Found the solution
"Long back story:
Here's what I was previously experiencing:
In Settings, it would list find my phone and have the subtitle "Setup Needed." When I tapped this, it would take me to the find my phone options and immediately display a modal dialog that said it would take a few more minutes to set everything up. When I hit OK, it would back me out of the find my phone settings. This left me completely stuck and no amount of rebooting or fiddling seemed to fix it.
Just now, while I was grabbing another phone to take a picture of the dialog to post here, my phone went to sleep. When I woke it up, the dialog was dismissed and I was in the find my phone options. I checked the first option, Connect to these features faster (may use more battery). I then hit back and the subtitle under find my phone reported connected. I logged into windowsphone.com and my phone is now listed. I simultaneously also received an email from windowsphone.com welcoming me to my new phone. There must be a bug that results in that dialog being dismissed when the phone goes to sleep, and that bug allowed me to toggle the first option, which re-attempted connecting my phone to windowsphone.com.
Anyway, long story short, if you are stuck in this boat, try these steps to work around them:
Set your lock screen timeout to the shortest available duration (1 min?)
Go to settings and tap find my phone.
When the dialog pops up telling you to hold on, set your phone down and leave it be until the screen turns off and the phone goes to sleep.
Turn your phone back on. You should be in the find my phone options now.
Check the first setting, Connect to these features faster (may use more battery).
Back out and verify it says connected and login to windowsphone.com and verify your phone is listed." - found this on windowsphone site, posted by someone. Not my solution.
Hi there,
I installed CM10 (thanks a lot for it by the way) this morning and it seems my display sometimes just activates without reason. At first I only noticed the device being extremely warm, so I check battery usage and 92% of it have been "display". The device went from 95% to about 50% in a matter of a two or three hours with me not using the tablet at all in that time. When I checked again a little later, the display was active, although I am sure I had sent the device to sleep mode.
Also, here are two features I would like to request:
1. Please add a way to rotate the lockscreen
2. Please add Mobile Data as a switch for the quick settings (the one you get to by "clicking" the clock). It is rather annoying to go through the menu to activate / deactivate it...
The.Vortex said:
1. Please add a way to rotate the lockscreen
Click to expand...
Click to collapse
OK, found the fix for that problem... the other one still stands
And I have got an additional issue now:
my Mobile Data Connection doesn't work. My carrier is o2 Germany and the stock ROM had some issues with that carrier as well a while back. Maybe it is the same problem?
For now I am switching back to stock, without mobile data, the tablet is only half as usefull, even with the otherwise better ROM
Add your APN Setting manually and it works nice. They are in the 3G Settings. I even had to just add a almost empty one to make things wake up again.
The.Vortex said:
Hi there,
I installed CM10 (thanks a lot for it by the way) this morning and it seems my display sometimes just activates without reason. At first I only noticed the device being extremely warm, so I check battery usage and 92% of it have been "display". The device went from 95% to about 50% in a matter of a two or three hours with me not using the tablet at all in that time. When I checked again a little later, the display was active, although I am sure I had sent the device to sleep mode.
Also, here are two features I would like to request:
1. Please add a way to rotate the lockscreen
2. Please add Mobile Data as a switch for the quick settings (the one you get to by "clicking" the clock). It is rather annoying to go through the menu to activate / deactivate it...
Click to expand...
Click to collapse
I have actually experienced the opposite--battery has been outstanding since flashing the ROM. I usually turn on Airplane mode when I am not using the phone, and am certain to turn off WiFi as well. Try that and see if it makes a difference. Also, be sure you are charging with an appropriate charger!
emuandco said:
Add your APN Setting manually and it works nice. They are in the 3G Settings. I even had to just add a almost empty one to make things wake up again.
Click to expand...
Click to collapse
Thanks, that solved the 3G issue and, as far as I can tell after one day, the issue with the screen activating, as well.
For the other point, being able to activate / deactivate the mobile data easily, I found Power Toggle (can't post link, just look for it in the play market or remove the blanks: ht tps://play.google. com/store/apps/details?id=com.painless.pc) which can add a widget to the notification area that works great
You can add more switches to the menu popping up when clicking on the clock. Thats what I did. Its in System -> Notification Bar (Or something like that, I use it in German ^^)
From the box, the always on display (AOD) shifted around every minute or so to prevent burn in.
Two days ago I installed the T-Mobile update for my s7 edge. Last night, I was trying out my new wireless charger when I noticed the AOD no longer moves around. I tried charging directly, rebooting, powering off, changing themes/styles to see if it would start shifting around.
Did the update cause this change? Is anybody experiencing the same thing? Is this a bug or intentional (didn't see anything in patch notes). Thank for any input.
I love the AOD but now super paranoid about burn in.
Have you tried turning AOD off, waiting a bit, and turning it back on? Maybe reboot while it's off, then turn it back on.
Yeah, reports circulating that the T-Mobile update is causing the AOD to remain stationary. If you're on T-Mobile, definitely turn off AOD until they release a fix.
Yea I've tried disabling AOD and rebooting but it's still stationary. I went ahead and disabled it entirely and hoping a fix will be released soon. Thanks all.
Damn, disabled mine until it's fixed. Didn't even notice, thanks.
Sent Via My Samsung S7 Edge
Is it dimmed more like the night clock mode? I was thinking maybe they did that and figured it's not a problem any more, but just guessing. I have Verizon version and I jist use the night clock mode all time as the regular clock seems too bright.
hp79 said:
Is it dimmed more like the night clock mode? I was thinking maybe they did that and figured it's not a problem any more, but just guessing. I have Verizon version and I jist use the night clock mode all time as the regular clock seems too bright.
Click to expand...
Click to collapse
The brightness of the AOD is still determined by ambient lighting. The only time the AOD moves to a different position now is when I power up the screen then lock it. If I don't power up the screen, it will stay in that same position with auto brightness in effect.
DNx714 said:
The brightness of the AOD is still determined by ambient lighting. The only time the AOD moves to a different position now is when I power up the screen then lock it. If I don't power up the screen, it will stay in that same position with auto brightness in effect.
Click to expand...
Click to collapse
Yeah, definitely must be a bug then.
I'm annoyed of the Night Clock where it shows the time of an alarm that's set out few days out. I now disabled all alarms so I don't see that. lol.
Also, the stupid + sign on the icon groups in TouchWiz is really awkward and wastes so much space. They didn't have this in Galaxy S6.
Had this issue on a Fresh install (Not present on the Same Version previously (I rolled back after a upgrade)
My default was stuck in the middle and did not move, I went in and change the clock style to the round clock and hands, and mine is moving around the screen as normal
Hi folks,
I've got the 6013 model in the US, running on AT&T, completely stock never rooted, fully updated to 10.3.11. Either the most recent update, or the one before that, seems to have caused an issue where texts sent to me overnight or in early morning before I first use the phone never show up. I've missed some important notifications due to this. The worst thing is they NEVER show up... they aren't just delayed until I wake the phone up. After I start using the phone, new texts make it through just fine. The phone seems to be sleeping deeper or something and not getting any of these cellular-based texts. Emails and other notifications based on wifi internet seem to be showing up fine.
Do not disturb is NOT enabled (and, I've tried toggling it on and off without change). This has been going on for weeks or longer, multiple reboots, etc.. I've checked my default texting app (Textra) and the phone's built-in Messages app... the texts aren't in either app. They just never show up.
What else can I look into to check the cause of this and hopefully a fix?
Thanks!
As a test today, I sent a text from my work phone to my personal OnePlus when I got up (late! Father's Day!) before interacting with my OnePlus at all. It did receive the text just fine. I think the cellular radio may be on some timer and going to sleep / waking up on some sort of schedule. Where are the settings for controlling this kind of thing? I haven't messed with this phone's settings much... it just worked fine out of the box and ever since for the last two and a half years until recent update messed this text thing up.
Further information: In Settings, Battery, Battery Saver is OFF (I've never enabled this) and under battery optimization I noticed Textra was set for Intelligent Control; I've toggled this to Don't Optimize. "Messages" was not present; I never use it.
Is there anything else to try? Note that the phone is plugged in and fully charged at the time these issues are occurring.
Frankenscript said:
Is there anything else to try?
Click to expand...
Click to collapse
Dude, not sure but hope it will work,
anyway trying will cost nothing...
Go to settings > battery > battery optimization >
hit on upper right 3 dots and select advanced optimization,
then be sure " SLEEP STANDBY OPTIMIZATION"
is toggled OFF.
Try again and cross your finger...
Cheers
Dadditz said:
Dude, not sure but hope it will work,
anyway trying will cost nothing...
Go to settings > battery > battery optimization >
hit on upper right 3 dots and select advanced optimization,
then be sure " SLEEP STANDBY OPTIMIZATION"
is toggled OFF.
Try again and cross your finger...
Cheers
Click to expand...
Click to collapse
Thanks @Dadditz , that was already off. Sigh. Not sure why this happens. I've tested when I get up at 7 am, sending a text from another phone, and my 6T receives it, but during the darker hours of the night, no joy. Thanks for the reply, though.
Just as a follow up, the problem seems intermittent. I got some 4 am texts from my sump alarm when the wifi went down briefly. No idea what's going on, but it's intermittent rather than constant.