Is there a way to do this? In short, I want my ringtone lower and my notifications higher. Is there a magisk module or something for this on OOS? Thanks!
I know using Tasker you can set them separately but I am not sure if the setting will stick.
yerger said:
I know using Tasker you can set them separately but I am not sure if the setting will stick.
Click to expand...
Click to collapse
No i dont think u can do that with tasker if the OS is not supporting. If you know a way that we can do this in Tasker in OOS can u please share it. It would be a great help.
Like I said, you can set them separately but I don't know if the setting sticks. I can't test this as I am in the office currently.
Check my screenshot, you can add the action to set each one.
https://www.guidingtech.com/separate-ringtone-notification-volume-android/
techlogik said:
https://www.guidingtech.com/separate-ringtone-notification-volume-android/
Click to expand...
Click to collapse
thanx for the link :good: I've tried it, unfortunately won't support our mobile's alert slider...my phone will ring even when switched to mute and yes, i've checked all the necessary permissions and settings...
Oh, I don't use the slider, so it isn't an issue. I just use the silent tile and nightly quiet schedule when needed. Slider is a cool feature, but I just got used to never using one on any phone and rely on the other method to silent the phone.
Just odd how there is no separate ring/notification like their used to be. Guess Samsung and maybe others people complain about this lack of obvious feature.
Related
Is there anyway to have the sound and vibrate turned on at the same time for incoming phones calls only?
sonwon said:
Is there anyway to have the sound and vibrate turned on at the same time for incoming phones calls only?
Click to expand...
Click to collapse
yes why?
mikevillarroel said:
yes why?
Click to expand...
Click to collapse
How then? I am new to Andriod.
What i want is sound off / vibrate on and vice versa. When i put my phone in vibrate mode, all notifications should be set to vibrate. Turn the volume back up and vibrate stops and sounds are back. Maybe I'm just not smart enough to figure it out.
Try settings profile in the market.
Another great app is just "profile" by noimjosh, it is a fully configureable profile manager. It also has whitelist functions and the ability to seperate sms mms and notification volumes to different levels. It will also control GPS WIFI, music volume alarm volume .. the list goes on and on. I highly recommen checking it out. well worth it. Hope this helps.
ajmoncrief said:
Try settings profile in the market.
Click to expand...
Click to collapse
I find that this is good for everything. That's probably why it costs $4. I have this one turn on my wifi when I get within 1/4 mi of my house. I also have it change my wallpaper so when I'm home it displays a hot naked girl and while at work it will display something other than that.
ifly4vamerica said:
Another great app is just "profile" by noimjosh, it is a fully configureable profile manager. It also has whitelist functions and the ability to seperate sms mms and notification volumes to different levels. It will also control GPS WIFI, music volume alarm volume .. the list goes on and on. I highly recommen checking it out. well worth it. Hope this helps.
Click to expand...
Click to collapse
I find this one only good for adjusting sound based on a condition.
sonwon said:
How then? I am new to Andriod.
Click to expand...
Click to collapse
Settings/sounds & display/ check "phone vibrate"
Thanks everyone!
Enjoy what is left of the 4th!
The new profile has some expanded functoinality. He just updated it i am however heading to the market now for settings profile. Always worth a shot. Thanks.
Sent from my PC36100 using XDA App
Hey Acid, settings profile looks really good. Lots of control, i am wondering if you agree on this though. I am on call sometimes from 330 am and want to keep everything silent except for a call from work. So i basically set up a "silent" profile, then created a rule so if i get a call from a specific work number the profile will change to another profile called "work".which has an audible ringtone of course. Thus i should be able to keep everything silent untill work calls then presto i can hear that call. Sound right to you?
Sent from my PC36100 using XDA App
ifly4vamerica said:
Hey Acid, settings profile looks really good. Lots of control, i am wondering if you agree on this though. I am on call sometimes from 330 am and want to keep everything silent except for a call from work. So i basically set up a "silent" profile, then created a rule so if i get a call from a specific work number the profile will change to another profile called "work".which has an audible ringtone of course. Thus i should be able to keep everything silent untill work calls then presto i can hear that call. Sound right to you?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
THESE instructions look like they run pretty close to what you're describing. I'm pretty sure you can.
Yep, I should have checked that turorial first, thanks for the suggestion, I might have to make the switch over!
Have a good one
Hey by the way, if you have Juice Defender and Settings Profile running in tandem I've noticed they can conflict on the wifi side of things.
Ahh, noted thanks!
I'm currently thinking of a remapping app (remapping as in changing a physical button's output) , but I do not own a oneplus two. Can somebody tell me what the alert slider's keycodes are?
If any of you is willing to help but do not know how to find such info, I attached an apk (that I built from an open source code) to this post. Please install and open the app then change the alert slider state, screenshot the output then send them to me. Also, please state what ROM version you are running.
When the app is finally released to an xda thread, I'll list all the testers there of course.
P.S: The Alert Slider is that new hardware slider that changes sound profiles, in case you didn't already know
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Swatto86 said:
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Click to expand...
Click to collapse
Swapping the "none" profile and "all" profile was exactly what I was thinking.
Can you please tell me what the output of the other states of the slider was?
EDIT:What you actually sent me was the mapping of the back button
is it possible to map it so loud, vibrate and silent
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
That is what I am trying to achieve. If you own a One Plus Two, please download and install the apk and send me the screenshots after you toggle each alert slider state
The app does not do anything when toggling alert slider unfortunately.
Swatto86 said:
The app does not do anything when toggling alert slider unfortunately.
Click to expand...
Click to collapse
Wow, that is a very unexpected result ._. I'll have to look into the source code then.
Thanks a lot everyone
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
morback said:
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Click to expand...
Click to collapse
yakuzlin said:
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Click to expand...
Click to collapse
Kito92 said:
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
Click to expand...
Click to collapse
I thought about having multiple layout options : battery modes;CPU governors; rotation change etc..
However I still haven't found the alert slider mapping file :/ This is becoming quite frustrating
Will have my OPT soon and will do anything I can to help out with this. Think the All/Priority/None options are not useful at all.
its taking a lot of time ...attached img is for priority ..ie key in d middle..
RulerAk said:
its taking a lot of time ...attached img is for priority ..ie key in d middle..
Click to expand...
Click to collapse
Wow, thanks! How about the two other states? none and all ?
For all its f8(not 100% sure) .... It's takin a looot of time n not recording for d other one..... May b cause m not rooted yet
Sent from my ONE A2003 using XDA Free mobile app
I really hope this works. Good luck on this
The one plus two slider doesnt work with keycode's
toonvanstrijp said:
The one plus two slider doesnt work with keycode's
Click to expand...
Click to collapse
Would you happen to know how it behaves?
thetechnologician said:
Would you happen to know how it behaves?
Click to expand...
Click to collapse
Any updates on this ? Very interested
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
I made an app for it. Try play.google.com/store/apps/details?id=com.nqk.vibratemode (sorry, I need to post 10 posts in order to embed the link
You just need to follow the instruction and enjoy the vibration.
Hi,
Small question or comment.
I find it really annoying when I use the slider how the ringtone volume is managed.
Going from All notifications to Priority Only, the Ringtone volume goes down to vibrate.
When I go back to All notifications, the volume stays on vibrate.
Is that normal behavior, any way of changing it ?
Thanks!
I tried this guide without results, try and let me know if it works for you w ww.youtube.com/watch?v=bGXkVprGKsY
edit: i find the solution on oneplus forum.
fix for no active profiles
Go to sounds and notifications and scroll go the bottom where it says notification access and enable tasker and it will work
I made an app doing that. Search for VibrateMode on playstore
khanhbabykid said:
I made an app doing that. Search for VibrateMode on playstore
Click to expand...
Click to collapse
Can you make this work for the OnePlus X?
Chris.nl said:
Can you make this work for the OnePlus X?
Click to expand...
Click to collapse
Did you try it on Oneplus X? I dont have the device but it should work well on any device with android 5
khanhbabykid said:
Did you try it on Oneplus X? I dont have the device but it should work well on any device with android 5
Click to expand...
Click to collapse
I did try it, but it won't change to vibrate mode. I'll send u a email for support.
Thnx.. It works on the OPX :good:
Hi,
I had different tasker rules for setting my mobile to mute at work and so on.
But after upgrading to 3.5.5 and now 3.5.6 the tasker rules won't work. I think the Oxygen overrides it by the alarm slider.
Is there any possibility that it work again?
Thanks.
Hobo2k said:
Hi,
I had different tasker rules for setting my mobile to mute at work and so on.
But after upgrading to 3.5.5 and now 3.5.6 the tasker rules won't work. I think the Oxygen overrides it by the alarm slider.
Is there any possibility that it work again?
Thanks.
Click to expand...
Click to collapse
I have the same problems. Currently I havent been able to find a sollution, despite using a few hours yesterday. It might be possible if you can update "secure settings" (not the app), which is possible using a plugin (App: SecureTask).
sblop said:
I have the same problems. Currently I havent been able to find a sollution, despite using a few hours yesterday. It might be possible if you can update "secure settings" (not the app), which is possible using a plugin (App: SecureTask).
Click to expand...
Click to collapse
Can you please explain how you did this?
*Nevermind I noticed I'm Looking for something else.
Greenforty1 said:
Can you please explain how you did this?
Click to expand...
Click to collapse
I havent had time to investigate if this is possible yet. Perhaps in the weekend.
sblop said:
I havent had time to investigate if this is possible yet. Perhaps in the weekend.
Click to expand...
Click to collapse
It's okay, do you maybe think it's possible to set the phone to vibrate only when in priority mode. With the new update they changed it so that you can't mute the volume anymore. I want mute to be mute and middle to be vibrate. I know how to make a task work with tasker but I can't override the volume.
Greenforty1 said:
It's okay, do you maybe think it's possible to set the phone to vibrate only when in priority mode. With the new update they changed it so that you can't mute the volume anymore. I want mute to be mute and middle to be vibrate. I know how to make a task work with tasker but I can't override the volume.
Click to expand...
Click to collapse
Perhaps by changing notification sound and ringtone to "Silent" in Priority, and back again in "All". - Alternatively use "none" option, and in Tasker manually add a vibration pattern... both options has its drawbacks...
My setup. At work (connected at wifi), change "Location" variable to work. When Location variable ="work" + weekday + time (8-17), set "do not disturb" to priority. -
Same at home, during night time.
Furhter to this, I read the interrupt value in a seperate job, and adjust various sound values accordinly and add a small 0,2 sec vibration, just so I feel that my phone goes to vibrate when at work.
I rarely use the slider on the phone.
did you restore apps with titanium backup? then try renstaling app
Hi all
It seems that the only way to get ring volume switched to vibrate only, is via the switch on the left side of the phone? I understand that this is the intended method, but that vibrate only cannot be configured in the regular profile shocks me?
The silence mode features an icon in the status bar, and enforces a whole set of other options, really? I understand that the switch is a design decision, but that is in no way the same to me as taking away regular well known usage of any android phone since dawn of time - the vibrate option in the normal 'volume profile'....
Any input on this? Am I missing something, or am I the only one having an issue here?
The lack of swipe across status bar to lower screen brightness is a different thing, but I'm sure developers will bring this back, at least with a custom kernel (EX for example).
Kind Regards
Seems like I'm the only person who cares :laugh: Or the thread just drowned :highfive:
TwinAdk said:
Seems like I'm the only person who cares [emoji23] Or the thread just drowned :highfive:
Click to expand...
Click to collapse
LOL, I think so ?. Personally I love this change.
Sent from my ONEPLUS A5000 using Tapatalk
I'll Growler to like it... I'm pretty sure..
Actually there's this app that can do this without you touching the switch. Sound Profile. I have no idea what makes it work but it does.
Now if only I could make Tasker do this...
wondering the same, had a similar problem, see https://forum.xda-developers.com/showthread.php?t=3629258
Solved it with tasker.
Trigger "silent ~ off" -> set a non empty ringtone.
trigger "silent ~ on" (this is true for dnd and silent mod): change ringtone to empty (silent) ringtone
I came across the same question and the only way I've found to enable silent/ vibrate mode without the slider is using a widget.
Ok, the attatched screenshot is a catlog of things happening when switching from silent to do not disturb. Notice the easily recognized event at the top, ThreeKeyHW.. That's whats triggering all the following actions. This can be intercepted by Tasker, and manipulated with :good:
Attatched screenshot
On having Tasker read or react to logcat content.
https://www.google.dk/amp/s/amp.red...nts/62gdx2/is_there_a_tasker_plugin_that_can/
TwinAdk said:
On having Tasker read or react to logcat content.
https://www.google.dk/amp/s/amp.red...nts/62gdx2/is_there_a_tasker_plugin_that_can/
Click to expand...
Click to collapse
why bother reading logcat (which might eat your battery)? for me, testing two variables in tasker allows me to determine the switch position:
%SILENT ~ off we are loud
%SILENT ~ on and %VOLR!=0 we are in dnd
%SILENT ~ on and %VOLR = 0 we are in silent mode
pen² said:
why bother reading logcat (which might eat your battery)? for me, testing two variables in tasker allows me to determine the switch position:
%SILENT ~ off we are loud
%SILENT ~ on and %VOLR!=0 we are in dnd
%SILENT ~ on and %VOLR = 0 we are in silent mode
Click to expand...
Click to collapse
You have more Tasker experience than I do :laugh:
Question, in your opinion, is any other tasker alternative worth spending money or time on, or is it just a matter of learning Tasker? My point being that Tasker is THE tool - but also quite difficult to manage at times... Hard to navigate in, I personally believe. But on the other hand, it can do ANYTHING, which you cannot say about ANY of the alternatives...
TwinAdk said:
You have more Tasker experience than I do [emoji23]
Question, in your opinion, is any other tasker alternative worth spending money or time on, or is it just a matter of learning Tasker? My point being that Tasker is THE tool - but also quite difficult to manage at times... Hard to navigate in, I personally believe. But on the other hand, it can do ANYTHING, which you cannot say about ANY of the alternatives...
Click to expand...
Click to collapse
Hi,
no, not more experience, but I found a posting for a similar question for the oneplus 3 where someone suggested testing the %INTERRUPT variable to determine if it is on value "priority" (meaning it is in dnd mode). I tested this and just created a task that shows a flash message with a number of variables of which I thought they could be interesting. Turned out that INTERRUPT was never set, but this is how I found out about SILENT and VOLR.
Regarding tasker alternatives: I haven't used an automation tool for maybe three years now, before I had only done simple stuff with tasker, so it was my first pick and it worked nicely - so I cannot say anything about alternatives...
me personally would love just bottom to top: all, vibrate only, nothing. no DND etc. another thing that bothers me is that when in silent/vibrate, I can't get Textra to use a certain pattern for messages coming in. oos defaults to two little vibrations. any ideas?
Sent from my ONEPLUS A5000 using XDA Labs
stooyleown said:
me personally would love just bottom to top: all, vibrate only, nothing. no DND etc. another thing that bothers me is that when in silent/vibrate, I can't get Textra to use a certain pattern for messages coming in. oos defaults to two little vibrations. any ideas?
Click to expand...
Click to collapse
Tasker. If status dnd and sms - vibrate
This annoyed me too.... I've done as people have suggested just switched the profile to "none"
TwinAdk said:
Tasker. If status dnd and sms - vibrate
Click to expand...
Click to collapse
well if ya have a profile, would ya mind sharing? :good:
Sent from my ONEPLUS A5000 using XDA Labs
stooyleown said:
well if ya have a profile, would ya mind sharing? :good:
Click to expand...
Click to collapse
I don't sorry ? if I had I would :good:
Is there no one here that can actually help with this? People just keep leaving short oneliners without any substance ("Just apply the thingy and it'll work"). It's not helpful, it's just frustrating as **** since none of us others get this to work.
If you do know how to do this, for real, then share your XML for your profile and/or tasks. Or write up a step by step.
rage77 said:
Is there no one here that can actually help with this? People just keep leaving short oneliners without any substance ("Just apply the thingy and it'll work"). It's not helpful, it's just frustrating as **** since none of us others get this to work.
If you do know how to do this, for real, then share your XML for your profile and/or tasks. Or write up a step by step.
Click to expand...
Click to collapse
Over the past days I've gained Tasker knowledge to do this. How would people want it to work, I'll try!