Hizpo Android Stereo, no audio for bluetooth cell calls - Android Head-Units

Maybe someone can give me a hand with my head unit. I have a Hizpo Andriod 7.1 for my Porsche Cayenne. The install was easy and works great but I cannot get a bluetooth cell call to work with an iPhone 6 plus or a Samsung A5. Both phones connect no problem and you can make a call on the screen but there is no audio out of the speakers and the person at the other end cannot hear me. I can listen to music by bluetooth so I do know it's connected. I even bought Apply carplay and it makes no difference. Any ideas? Maybe there's a setting I'm missing?

Same here, Hizpo PX5 Android 8.0 .
I can start a call from the stereo, but the phone will still use its internal speaker for the audio.
Did you resolve in any way?

Related

Does anyone have a pioneer deh 7900bt?

Hey guys,
Does anyone have experience with this head unit?
I am getting this head unit in the mail and i wanted to know if it works as advertised with the mogul. I want to use it as a BT speakerphone and stream sirius.
Are there any tricks or tips for use with this head unit?
I am REALLY excited about it but I want to be prepared for it in case there are things I need to know.
Thanks guys!
Pioneer Premier DEH-980BT
I have the DEH-980BT (first model with bluetooth). Make sure you pair the pioneer head unit with your phone and after pairing register the phone in the pioneer unit (read the pioneer instructions) if you still have problems change the following registries in your phone
HKLM\Software\Microsoft\Bluetooth\SYS\COD
Change to 5898764
HKLM\Software\Microsoft\Bluetooth\AudioGateway\BTAGPBModule
Change OEM to \Windows\BthAGPhonebook.dll
HKLM\Software\Microsoft\Bluetooth\AudioGateway\BTAGExtModule
Change OEMAGW.DLL to \Windows\vcbthag.dll
You might still have problems setting both hands free and wireless stereo at the same time. I only have only hands free set on my phone and its works great.
I have the DEH-7900BT and it works flawlessly. I have to initiate the pair from the phone in order to get things setup, but once I have paired them the phone auto connects every time I get in the car and both the handsfree and stereo audio work as advertised. AVRCP even works correctly.
speaking of pioneer HU
has anyone tried the OEL screensaver studio appz ?
is there a site of people's creation available on the net ?
i can't find anything about it.
BTW, i have the 980BT unit and its top notch !
wait, so this radio has bluetooth streaming music right??, because i bought the Pioneer DEH 6250 BT and it doesn't have that function so i sold this 6250 to my friend and i was looking for this one 7900 because i thought it would bluetooth streaming music audio
why would one not use a cheap FM transmitter to do the audio to stereo? They charge the phone, use less power, and are like 4$ on amazon?
FM Transmitters SUCK!
1. Audio quality is crap compared to BT2
2. No A2DP support with a FM transmitter (on screen track info on your stereo, track fwd/back control, etc)
3. Noisy interference with other cars, towers etc.

Seicane s09206 Bluetooth Issue in Phone Calls & Connected BT Devices Not Displayed

Seicane s09206 Bluetooth Issue in Phone Calls & Connected BT Devices Not Displayed
Hi there!
I purchased this Android 8 radio from Seicane for my 2007 Jeep Grand Cherokee:
***seicane.com/seicane-s09206-android-gps-radio-car-stereo-for-2002-2007-chrysler-300-m-300c-300-limited-touring-with-dvd-player-gps-navigation-system-mirror-link-touch-screen-rearview-camera-tv-video-wifi-canbus-obd2-bluetooth-usb-sd-steering-wheel-control
It is using MCU: ZHAN_(NOR)__90_C9RD6686_CAN(A)PX5D1808140
Which looks like this s200 platform: ***roadnav.com.cn/show_content.php?id=949
I am having the following issues:
1) I can not hear audio from my car speaker with Bluetooth calls but it will send audio through the microphone. I can hear streaming Bluetooth music from my car speakers fine. I believe this may be a result of a phone audio setting for the Bluetooth device however I can not see paired devices from the radio.
2) I can not see currently paired devices from the radio. I believe this feature is disabled. Is there a way to enable this? I am able to pair my iPhone by just going to my phone setting but the list of connected Bluetooth devices does not show on the android radio. I have tried installing third party bluetooth managers and they are also blocked from seeing the connected devices.
3) The EQ fader goes to zero volume when the speakers are all the way to the front, and all speakers have full volume when it's faded all the way to the rear. Balance left and right work perfectly. This may also be related to the Bluetooth issue as I head most BT phone calls just use the front speakers.
Thanks for your time!
Jayzo
Hi My problem is that I can dial out manually but I have no steering wheel control both phone and volume control l hope can help me thank you in advance Ned

Dasaita MAX10 - No sound while calling in bluetooth

Hi all,
I've just installed a Dasaita MAX10 5216 head unit in my 2016 Rav4 hybrid.
The head unit is updated now with latest firmware (MTCE_HA_V3.67 + Build HA3_rk3399_10.0_ota(20201113)) but the update does not fix my problem with sound while calling in bluetooth. Bluetooth music sound works fine from my phone but not calling sound. People can hear me but I don't hear nothing. I see the bluetooth app is calling or ringing but I cannot hear anything.
For your information I've installed the app "mtcdialer" in order to receive and launch Ok Google
I'm using a huawei mate 20 pro with android 10. Music in bluetooth is Ok I can hear it but no sounds while I try to call or answer.
Do you have any idea about calling sound issues in bluetooth ?
Many thanks in advance from the community

PX6 Bluetooth problem

I just upgraded my (no-name) head unit to mcu-202101091001BD6-1351 and upgrade Android 10 to os_update_KC1E0105-P01-1.1.4.9.1_20201211_131046.f2fs.
Looks as the newest dedicated to PX6 with AHD software (such unit I have).
Works fine, except BT. BT use BLINK-161. I can call from and to phone paired via BT with Head Unit, but there is no sound in spekers. But it is possible to call/receice from stearing weel or LCD screen and even if somebody call me, there is calling signal in speakers.
Is any way to make BT fully working?
.

Junsun V1 Pro 8+128gb Siri CarPlay problem

Hey
i don't know if someone of you might be able to help me (i hope someone know), but 99% of the time when I am using CarPlay it works perfectly except for one thing : when Siri talk / read a message or a notification the audio quality of Siri voice is really bad (and it's the same when i call someone, the voice from the one that i talk to is really bad in term of audio quality.
I don’t know why, especially that the music in the background is still played with a good audio quality :/
Maybe someone has a software update for my Junsun V1 Pro 8+128gb using a Mediatek MT6768 SoC ?
(I've tried with IOS 15, 15.2 and 15.4 and it does the same problem)
Thanks in advance :/
I have the same unit as yours. What car is yours installed in? Mine plays excellent audio with music but no sound at all when in phone calls. Wired CarPlay, Wireless CarPlay, Bluetooth phone calls, all use the microphone perfectly, but when it comes to hearing the other person, I can't hear anything. And yes, I've turned the volume up all the way.

Categories

Resources