Hi all
I bought a second hand car stereo 8.1 reference 8227l Chinese without name ... see pics
I have several problems : impossible to find how to go into recovery and therefore impossible to root for now ... (I tested all possibilities: reset / power and all keys)
But more serious: impossible to have access to settings / accessibilities necessary for google maps which bug in navigation, or install a program like "velociraptor" to have the speed in real time
Cannot find out how to do a hard reset too : rolleyes: there is a reset / settings function but it does not do anything ... reboot everything stays in place
Thank you for help and good day
Usually reboot and volume +
Thanks for help but not possible with vol+. I'm not sure buttons are enabled during boot they're lightning only after android is running.
Android Head Unit 8227
Good day to everyone, ive also got a head unit 8227L from ebay, its a 7" android 8 head unit, none if the physical buttons do anything, they died after i changed the boot logo, i have tried putting it back to the original one but no help, on top of that, the touch screen dosent work in the cold, and here in the great white north, its 30 degrees below freezing for months, Ive tried everything to get them working again but no luck. I have to use a USB mouse to even do simple things like change volume, so needless to say, its a useless radio until i can get the buttons working again. Any help be greatly appreciated. Ebay just refunded me for the radio they quit trying to help, all they said was to just press the reset button, which dosent help
ripster54 said:
Good day to everyone, ive also got a head unit 8227L from ebay, its a 7" android 8 head unit, none if the physical buttons do anything, they died after i changed the boot logo, i have tried putting it back to the original one but no help, on top of that, the touch screen dosent work in the cold, and here in the great white north, its 30 degrees below freezing for months, Ive tried everything to get them working again but no luck. I have to use a USB mouse to even do simple things like change volume, so needless to say, its a useless radio until i can get the buttons working again. Any help be greatly appreciated. Ebay just refunded me for the radio they quit trying to help, all they said was to just press the reset button, which dosent help
Click to expand...
Click to collapse
I do not have an 8227 unit but try to help here.
With my px3/5 and T8 units, I can remap physical buttons using either a built-in app, or Settings/Car Settings menu. You may try to find out available options on your unit.
There is a Russian forum for 8227 units and you may use google translation to see its contents: https://4pda.ru/forum/index.php?showtopic=930058 .
Thank you for your response, the touch screen works when the truck gets warm, and only when it gets warm, says on ebay listing that it only works to -10 C, and well it will be awhile for that to happen here, the real problem is the no buttons work, i went to that site you provided and google did a great job translating it, but unfourtnley didnt help my problem, also the picture provided looks different then mine, im not sure how to add photos so i cant even show you what mine looks like, but ebay item 273656041408 thats the one i have
I have an 8227 device but its a hizpo not the same as yours so I dont know if you have the same options. But on mine, when you go into the about device in settings there is a gear icon you can click on which the code 8888 works so you can access deeper settings. One of which is the buttons on the front.
yes, ive tried that option, i can key into the key learn option, but it wont program any of the keys, what i dont understand is, how would changing the boot logo affect any of the keys, it is the 8888 code as you said to get to the other menu page, there is however a slider bar at the bottom of the key study option, has Chinese writing before it, i can slide it from 0-55, not sure what it does or if thats my problem
defective gps module ?
Hi everyone.
I recently bought an 8227L chinese 8.1.0 android car head unit. Everything works well, except the GPS: it can't find any sattelites. The connection of antenna is properly made, I tried to put it in different locations, even outside of my car, but no sattelite found.
Is there any setting I can change (e.g. factory settings or so)? Maybe the GPS chip is defective ? How can I get into that ?
Thanks.
hi there and welcome here, possibly you plugged GPS ant into wrong spot, i know on mine the radio and gps ant look very similar, tho im not sure if thats even possible, it is normal for the radio to take up to 5-10 min for the first calibration. You may be correct on a defective gps antenna, if your antenna has a clear line of sight and its been on for 10-15 min, if its still not finding any satellites id go with a bad antenna, but im sure theres many more people here with much more experience then myself, hopefully someone else has better suggestions
ripster54 said:
Good day to everyone, ive also got a head unit 8227L from ebay, its a 7" android 8 head unit, none if the physical buttons do anything, they died after i changed the boot logo, i have tried putting it back to the original one but no help, on top of that, the touch screen dosent work in the cold, and here in the great white north, its 30 degrees below freezing for months, Ive tried everything to get them working again but no luck. I have to use a USB mouse to even do simple things like change volume, so needless to say, its a useless radio until i can get the buttons working again. Any help be greatly appreciated. Ebay just refunded me for the radio they quit trying to help, all they said was to just press the reset button, which dosent help
Click to expand...
Click to collapse
Lucky to get a full refund. lol. Go to Car Settings, Factory Settings, enter password 8888, go to Physical button study and have fun. Remember that some buttons have multiple features like the power button is power and mute.
Btw, it is very hard to find info on these units. Weird since they are awesome for the price.
ric69 said:
Hi all
I bought a second hand car stereo 8.1 reference 8227l Chinese without name ... see pics
I have several problems : impossible to find how to go into recovery and therefore impossible to root for now ... (I tested all possibilities: reset / power and all keys)
But more serious: impossible to have access to settings / accessibilities necessary for google maps which bug in navigation, or install a program like "velociraptor" to have the speed in real time
Cannot find out how to do a hard reset too : rolleyes: there is a reset / settings function but it does not do anything ... reboot everything stays in place
Thank you for help and good day
Click to expand...
Click to collapse
Dear, I found this procedure to root: https://4pda.ru/forum/index.php?showtopic=930058&st=340#entry82160226 .
I can't download the attachment cause I can't login due to Russian.
Did you try this procedure?
Tks.
Hi I cant login to 4pda too, and I doubt this process cause I can't even connect to my laptop (not recognise / no sound with usb)
ric69 said:
Hi I cant login to 4pda too, and I doubt this process cause I can't even connect to my laptop (not recognise / no sound with usb)
Click to expand...
Click to collapse
I had that problem with USB and my laptop... I had to enable it in the 8888 settings. I dont remember the actual name of the setting atm but check my stereo later and let you know.
Try and post result please.
andsoitiswritten said:
I had that problem with USB and my laptop... I had to enable it in the 8888 settings. I dont remember the actual name of the setting atm but check my stereo later and let you know.
Click to expand...
Click to collapse
Oh yes you are absolutely right, in settings/ others/ enable USB2 debug and save/reboot at boot I can see a line at the top (don't remember exactly ... "waiting usb" or something like that.
Now I'm really afraid to try root as I don't have any backup and it's a second hand radio :silly:
Did you try rooting
Hello yes but flashtool.exe is not working on my laptop (I tried with Windows 7 pro)
Ok I gave a new try to Mekede root... so flashtool.exe must be at c:\ on the computer to work but when I put AC8227_android_scatter nothing happened, all is grey, 0kb/s. I tried to connect USB on unit but impossible to recognise (I tried to enable debug USB in dev settings) drive me crazy...
Edit : I totally bricked by flashing MekedeRoot via sd card. I opened unit and saw it's MEDIATEK MT6323LGA 1831AGAH CTG39W03
I'm searching drivers for Windows to connect USB but no chance for now
It looks like I may have come to the right place.I have one of these units from Ebay. It reboots every time power (ACC) is applied and again when you start the engine. I went back to the Chinese vendor and they suggested I do a hard reset. Now the left hand side of the touch screen X0-X200 doesn't work. Nor does any of the soft buttons on the left hand side.
I've gone into the factory settings screen and found the touch related functions; Touch Settings, Touch Test, Physical Buttons Study and debug touch.
The Factory Setting App looks similar to this guide on the Joying website dubdubdubdot joyingauto.com/blog/category/head-unit-problems-solved (I cant post links yet) particularly the Physical Buttons Study and step 3 where the X/Y deltas can be set. However, when I select 'config' in the unit I get a config file not found error.
So would it be possible for somebody to post a copy here of that file for me?
Also in the 8227L Factory settings Menu is the "export Config" option. That creates a file metazone.bin on the USB drive. Could I get a copy of that from a working system please? Mine is 1Mb but checking with GHEX it is pretty empty (0x00's). Also any clues on where it is located or how to import the data?
In /storage/emulated/0 is a file calibration.ini it has zero bytes does that have anything to do with it? A copy of that would be appreciated as well please?
Then there is the reboot problem. I have another, different, Android 7 unit in another vehicle it comes on and stays on immediately power is applied.
I have found this file auto_shutdown.sh in the root folder
I hope you can help please? I'm having trouble with the vendor etc to get any resolution or refund
Related
Hello guys!
I have Xtrons D714A with original ROM (4.4.4) and recently I installed Car Launcher on it. The next day when I powered up the unit again it showed a screen that I have to choose the default launcher for the unit. Anyway the problem is that the touch screen stopped working and I cannot choose anything. The strange thing is that the notification bar is working, I can even dial up the settings bar and enter in the menus, but once I enter there the touch screen does not work as well (it only works in the notification bar).
I tried to reset it trough the reset button but it only resets the settings, I need hard resset to erase Car Launcher. I also tried to turn on the unit while holding all kind of combinations of the hardware buttons but nothing happened - I think that the "power" button is not actually power button because when the unit was working the only thing it did is to get the unit in sleeping mode when I hold it.
I contacted Xtrons but no answer from them by now. Also I saw that I am not the first one with this problem :
http://forum.xtrons.co.uk/forum_posts.asp?TID=144139&PID=211052&title=problem-with-d714a
http://forum.xtrons.co.uk/forum_posts.asp?TID=143637&title=d714a-touchscreen-not-responding
Can someone help with this issue?
Thanks in advance!
Is there some script that I can upload on SD card and do a hard reset if I power up the unit with it? Or upload new ROM and install it from SD card by the same method, and if yes, can someone provide me ROM file?
@strballer try emailing Xtrons at: [email protected]. They usually reply within a day or two. They should send you a link with a firmware download as they did for my D717AL.
Thanks for your answer! I already contacted them and they suggested to turn off the main power for 15 minutes but as expected this done nothing but just reset the settings of the unit, not hard reset. Anyway I just managed to fix the problem. I connected USB keyboard and I was able then to dial the default home launcher. After that the touch screen was working again. Very strange bug...
zhekozhekov said:
@strballer try emailing Xtrons at: [email protected]. They usually reply within a day or two. They should send you a link with a firmware download as they did for my D717AL.
Click to expand...
Click to collapse
They told me there´s no firmware available. Did you mange to have Android 6 on your xtrons D717AL? Since it is sold with this now as far as I read somewhere. I stuck on 5.0
Hi
Three years ago I bought head unit for my vw, was working fine till now. I didn't change anything, no new software or apps installed. Unit start bootlooping couple days ago, I disconnected all cables accept main plug and still nothing, there is no RST button. And rest of buttons working on touch, I was trying to get to bootloader but no luck.
Any ideas??
I'm a newbie here but had a similar situation with my Android video player. The ebay seller sent me a link to a site to download a ROM upgrade which involved powering it up via USB cable, as the adapter wouldn't power it on in the first place. Once I tried it, it worked. You may have to download it on a laptop, or hook up a power strip to a desktop and monitor. Hopefully that will help reach your vehicle so you won't have to remove the unit halfway to check for a reset button. However, perhaps if you are able to partially remove the unit you can check on the back, sides, top and beneath it for a reset button.
I know this is probably not the answer you're looking for, but maybe it will solve the issue if nobody else steps in to help.
Thanks for answer
I was trying to get to bootloader but no luck, there is no RST button anywhere even inside.
photosDOTappDOTgooDOTgl/YsGLYJBuBcCb5ok99
Seller wasn't helpful, and I don't have software to flash it.
Maybe someone will look on pictures and let me know how to save my unit.
Regards
Sorry
One picture is from original radio Vw then ignore it.
Regards
Sorry
One picture is from original radio Vw then ignore it.
Regards
Hi there,
After doing an upgrade my unit it stuck with a black screen and need to get into recovery mode in order to reload a working firmware.
Anyone any idea how to get there?
Tried the reset button for some time with and without home or on/off button and also removed the power source and pressed reset while putting power back but nothing seems to work
So i'm stuck for now :crying:
Any help?
Did you ever get your unit fixed? Did you try restarting with a USB plugged in with the firmware file on it?
No sorry... never got it working again. Had to send it back for a replacement unit.
I've been doing a lot of back and forth with their support on another issue and I've updated my MCU and software so many times now I thought maybe I'd be able to give you a hand.
Do you use any navigation apps on your Avant4? When I use ones that have voice navigation, the voice is getting truncated at the start and end of the directions. Some apps more than others and it seems to be related to those apps that use TTS (Text to Speech).
I'm using Waze via Android Auto. So i'm not having this problem.
So it runs from your phone and just displays on the Avant4? I have Waze running on the unit directly and it gets truncated.
I have al running on my phone and use a Android Auto box.
U can buy it from Avin USA. See website for all options on your Avant4.
wouterverboom said:
No sorry... never got it working again. Had to send it back for a replacement unit.
Click to expand...
Click to collapse
If you hold the volume knob until it starts blinking then let go and hold it down again it will boot the unit into recovery mode.
Hey all,
So i have this android 8 Secaine head unit in my truck. Yesterday it booted and failed. It shows try again and factory reset as options. But none of the touch buttons will move the selection. I plugged in a mouse and can scroll up and down but it will not activate either selection. It was working fine the other day. When i press the reset button it will reboot show the navigation software logo then go to the screen i have attached a photo of in this thread.
Any Ideas ? Is this a hardware failure ? Can i use a jump drive to re-flash the mcu ?
Thanks.
Well, there are 2 points visible...
Try again
Factory data reset
Seems you need to try the second one in this case.
It is written in the yellow colored part how to switch and choose.
Yes i saw that but nothing you touch on the head unit will move the selection or allow you to enable it. The touch function on the radio is gone. I can how ever move up and down the 2 options by plugging in my mouse, but clicking on one of the options does nothing.
jaystundra said:
Yes i saw that but nothing you touch on the head unit will move the selection or allow you to enable it. The touch function on the radio is gone. I can how ever move up and down the 2 options by plugging in my mouse, but clicking on one of the options does nothing.
Click to expand...
Click to collapse
If you don´t have physical buttons, take some USB-keyboard and use the arrow keys and the enter key.
Going to try that this weekend and cross my fingers. I have a few MCU's that are specific to this model i can try to flash if i can get it to factory reset. Just hoping the hard drive hasnt failed or the Rom is ok. It has been hot here this week.
jaystundra said:
Going to try that this weekend and cross my fingers. I have a few MCU's that are specific to this model i can try to flash if i can get it to factory reset. Just hoping the hard drive hasnt failed or the Rom is ok. It has been hot here this week.
Click to expand...
Click to collapse
Just get it out of the car and on your desk, connected to a 12V power supply.
That is nothing which should be done in the car, at least not if it is hot or stone cold.
Sorry in advance for my bad english, I actually speak german and translated it
Hello, I bought a new used car (Honda CR-V 2006).
The previous owner installed a Junsun V1 Pro display.
When I test drove it, it all still worked without any problems, but the previous owner completely reset it before selling it and that's why I now have probable following problems.
Problem 1:
The buttons on the left side (not on the touch screen) do not work, nothing happens when pressed and the buttons also no longer light up.
Problem 2:
There is no longer a T-Link app in the menu and therefore CarPlay no longer works. I have looked through every menu setting but have found nothing.
More info:
In general it seems to me that the software is not complete, there are some items in the settings that seem buggy. When I want to make a software update via USB, no confirmation button comes, when I want to log in to the developer menu, doesn't happen (I already tested all possible passwords from https://forum.xda-developers.com/t/junsun-v1-codes.4282299/).
The steering wheel buttons work, I can turn the music up and down and also change the radio station.
My solutions:
I have already tried to make a software update via the internet or via a USB stick, both without success, via the internet it says there is no new update and with the USB stick there is no confirmation although the stick is recognized by Android.
I have also tried to reinstall the software with a USB stick but there is no installation popup, although the USB stick is recognized.
I have also tried downloading the T-Link app via APK, which all worked, but as soon as I try to open the app, it crashes.
I'm starting to get desperate because 2 days ago this all worked, but since the reset it no longer does.
Do you guys have any tips and solutions on how I can fix this?
Hello,
After a factory reset I have the same problem 1 of you. Unfortunately I not have find the solution, but the buttons is not on all headunit those junsun add by activation menu or by an apk this option.
Finally the solution of problem 1 is remap the button in factory menu 8888.
Thank you, it works now!