Hi everyone,
I brought this phone from a phone store (not official), and it's second hand. The problems are common, LAG.
And sometimes, when i start phone data, my SIM signal suddenly stopped…
And I found that this phone had been rooted before and unroot for being selling.
I knew knox had broken.
It's common ROM same as others but it was LAAAAG.
[SM-G935FD], my phone model.
[Android 6.0], my android .
I've tried to reformat and recovery mode wiped before. And it's useless.
Any suggestions everyone?
RichardGuyz said:
Hi everyone,
I brought this phone from a phone store (not official), and it's second hand. The problems are common, LAG.
And sometimes, when i start phone data, my SIM signal suddenly stopped…
And I found that this phone had been rooted before and unroot for being selling.
I knew knox had broken.
It's common ROM same as others but it was LAAAAG.
[SM-G935FD], my phone model.
[Android 6.0], my android .
I've tried to reformat and recovery mode wiped before. And it's useless.
Any suggestions everyone?
Click to expand...
Click to collapse
Update your phone dude it's on old android 6.0 .upgrade it to oreo 8.0 via Odin and that should fix your issue ,even tho it shouldn't lag like that on any android version.
Scorpionea said:
Update your phone dude it's on old android 6.0 .upgrade it to oreo 8.0 via Odin and that should fix your issue ,even tho it shouldn't lag like that on any android version.
Click to expand...
Click to collapse
Hi! Thanks for your reply!
But where should I get it? And does your "Oreo 8.0" belongs to official or Properties Oreo 8.0?
RichardGuyz said:
Hi! Thanks for your reply!
But where should I get it? And does your "Oreo 8.0" belongs to official or Properties Oreo 8.0?
Click to expand...
Click to collapse
It's not my Oreo ,it's Samsung official firmware 8.0 Oreo . First learn how to flash something with Odin then download official firmware from sammobile or updato site. Put your phone model inside and start downloading
Scorpionea said:
It's not my Oreo ,it's Samsung official firmware 8.0 Oreo . First learn how to flash something with Odin then download official firmware from sammobile or updato site. Put your phone model inside and start downloading
Click to expand...
Click to collapse
Wow! That's mean Oreo 8.0 are available for officially download?!
I'm clear on how to flashing ROM with Odin…but I'm not sure with how to get official ROM.
RichardGuyz said:
Wow! That's mean Oreo 8.0 are available for officially download?!
I'm clear on how to flashing ROM with Odin…but I'm not sure with how to get official ROM.
Click to expand...
Click to collapse
Here , u can choose any country . Just scroll down a bit
https://updato.com/firmware-archive-select-model?q=SM-G935FD&rpp=15&order=date&dir=desc&exact=1
Make sure u have latest 3.13.1 Odin . Happy flashing
Scorpionea said:
Here , u can choose any country . Just scroll down a bit
https://updato.com/firmware-archive-select-model?q=SM-G935FD&rpp=15&order=date&dir=desc&exact=1
Make sure u have latest 3.13.1 Odin . Happy flashing
Click to expand...
Click to collapse
Hi there Scorpionea!
Lastly, i follow your instructions and finally it solved!!
Thank you so much !
Noted: Odin must be 3.13.1~
Related
Hello my friends,
Today I will show you how to get the fastest nougat on your S7 / S7 EDGE.
Firmware flashen on the SM-G930FD / SM-G935FD at your own risk.
I accept no liability if your device does not work anymore!
This firmware can also be flashed on an S7 Edge SM-G935FD.
But this only happened at your own risk.
Download to Samfirm v 3.6 first.
Then open SamFirm and enter the following:
https://forum.xda-developers.com/galaxy-tab-s/general/tool-samfirm-samsung-firmware-t2988647
http://www.chip.de/downloads/Odin3_12992520.html
For Mac:
http://techbeasts.com/download-odin-jdoin3-mac/
Fast Downloadlink for SM-G935F:
https://mega.nz/#!rFIlWA5S!h4JrAyNxJWbH8hqB9Co_7OvMcdiykfMFtU6I8XP4cwc
Fast Downloadlink for SM-G930F:
https://mega.nz/#!mc5CRByS!e6nXnqLQTkchX2dAkvadmQTBEuPC0ikYvZYb7l_oZ98
For the S7 G930F:
Model: SM-G930F
Region: BTU
AutoMode
For the S7 EDGE G935F
Model: SM-G935F
Region: BTU
AutoMode
In Ordin:
SM-G930F:
BL: BL_G930FXXU1BPLB_CL9689434_QB11912473_REV00_user_low_ship.tar
AP: AP_G930FXXU1BPLB_CL9689434_QB11912473_REV00_user_low_ship.tar
CP: CP_G930FXXU1BPJJ_CL9519568_QB11350284_REV00_user_low_ship.tar
CSC: CSC_BTU_G930FBTU1BPK3_CL9952030_QB11729675_REV00_user_low_ship.tar
SM-G935F:
BL: BL_G935FXXU1BPLB_CL9689434_QB11912473_REV00_user_low_ship.tar
AP: AP_G935FXXU1BPLB_CL9689434_QB11912473_REV00_user_low_ship.tar
CP: CP_G935FXXU1BPJJ_CL9519568_QB11350284_REV00_user_low_ship.tar
CSC: CSC_BTU_G935FBTU1BPK3_CL9952030_QB11729675_REV00_user_low_ship.tar
Not the HOME_CSC !!!
There you will see Android 6.0.1. This download and unpack.
Back up your data and use Odin Flashing.
Device setup and updates.
Update Download and install.
Have fun with it
It could be that the update on Android 7.0 is no longer available since Samsung has stopped the roll-out because of too many bugs.
Whether this message is something I can not confirm. I got the update today. Please tell me if you got the update this way.
Thank you!!
can i flash this if i have a Canadian s7 edge with the qualcomm processor?
jatt101 said:
can i flash this if i have a Canadian s7 edge with the qualcomm processor?
Click to expand...
Click to collapse
No, it does not work. This is only for the Exynos devices
LionHunter95 said:
No, it does not work. This is only for the Exynos devices
Click to expand...
Click to collapse
How do i know what firmwares are for qualcomm version?
jatt101 said:
How do i know what firmwares are for qualcomm version?
Click to expand...
Click to collapse
Look under software info what is there. If there is G930F / G935F this method works. Should there be something different then this does not work
I guess that this does wipe data ?
How to do without wipe ?
LionHunter95 said:
No, it does not work. This is only for the Exynos devices
Click to expand...
Click to collapse
The official Canadian version is the Exynos device! unless you bought the unlocked version!
arc_u said:
I guess that this does wipe data ?
How to do without wipe ?
Click to expand...
Click to collapse
If you download this firmware, you have to flash this by Odin. If you flashst them all your data will be lost. So before everything save and then flash.
LionHunter95 said:
No, it does not work. This is only for the Exynos devices
Click to expand...
Click to collapse
itzik_man said:
The official Canadian version is the Exynos device! unless you bought the unlocked version!
Click to expand...
Click to collapse
How do i tell? it was sent to me when i returned my note 7. I got an unlock code with it, so i am not sure.
jatt101 said:
How do i tell? it was sent to me when i returned my note 7. I got an unlock code with it, so i am not sure.
Click to expand...
Click to collapse
Download from Play store AIDA64!
itzik_man said:
Download from Play store AIDA64!
Click to expand...
Click to collapse
Thank you bro! You were correct!
The 7 update isnt showing up for me after the update...
I went back to stock firmware because I had rooted my phone with a rom so I went back to stock with a 6.0.1 mm firmware. A lot of people from the uk are getting this update although I haven't yet haha?
The official one that is.
SeanIsHerko said:
I went back to stock firmware because I had rooted my phone with a rom so I went back to stock with a 6.0.1 mm firmware. A lot of people from the uk are getting this update although I haven't yet haha?
The official one that is.
Click to expand...
Click to collapse
If your device is rooted and you do the original firmware flashing, your device will be officiel again
LionHunter95 said:
If your device is rooted and you do the original firmware flashing, your device will be officiel again
Click to expand...
Click to collapse
Yeah it "Was" rooted then I flashed the original firmware back on it although forgot to go into Super Su to unroot but the flash did it for me but then tripped knox lol.
Yeah I thought I was on official again but my mate has got the official update from nougat and I haven't lol (We live close)
SeanIsHerko said:
Yeah it "Was" rooted then I flashed the original firmware back on it although forgot to go into Super Su to unroot but the flash did it for me but then tripped knox lol.
Yeah I thought I was on official again but my mate has got the official update from nougat and I haven't lol (We live close)
Click to expand...
Click to collapse
According to a few websites, the official update was stopped because of bugs again. Wait a bit and update the OTA again. Actually, this should work. If it does not go with you Samsung has stopped the update again.
The update is about 1.2 GB, and, especially in China, ran into some bugs initially, and was reportedly pulled before being re-released today. As to when will it hit the non-Exynos versions sold on US carriers, remains to be seen, but the wait shouldn't be long now that the beta testing phase is done and dusted. So ???
Some quick questions please..
1. What does BTU mean?
2. Will i be able to install this on 935fd without any probs?
can any one help me....I am from italy using s7 edge with model (SM-G935F )......if I flashed BTU Firmware from UK will void warrenty
Good News Guys >>>>Official T-Mobile Galaxy J7 Android 7.1.1 Nougat update released
We reported recently that the Galaxy J7 might soon receive the Nougat update. The handset was spotted at the Wi-Fi Alliance running a Nougat build. It was a big indication that the company was planning on rolling out the update soon.
T-Mobile has now started rolling out the Android 7.1.1 Nougat update for the Galaxy J7. It’s one of the few devices that Samsung has updated straight to version 7.1.1 from Marshmallow.
T-Mobile Galaxy J7 Android 7.1.1 Nougat Update
T-Mobile has started rolling out the Nougat update for the Galaxy J7 over-the-air. However, the company’s support document for this handset is all over the place. It assigns version number Android 6.0.1, Android 7.0 and Android 7.1.1 to one single firmware version, J700TUVU3BQI5.
This is obviously not possible. Clearly, there are clerical issues with the document. That doesn’t mean the T-Mobile Galaxy J7 Android 7.1.1 Nougat update isn’t rolling out. Those who own this handset on T-Mobile will soon receive an update notification if they haven’t already.
This firmware is also available for download from our firmware section where the Android version is accurately mentioned as Android 7.1.1 Nougat. Despite the fact that this update has been released in October, it comes with the August security patch.
Galaxy J7 owners on T-Mobile can either wait for the update to go live in their region or simply download the firmware from our website.
Download 7.1.1 here and happy flashing J700TUVU3BQI5 - Galaxy J7 SM-J700T TMB USA (T-Mobile)
Click here
Source :- SamMobile
Tmobile received the update from samsung on 8/28. They filled it with their garbage and sent it last thursday, most of us flashed aqf1 stock and got it ota friday morning.i dont see any clerical errors or anything like that at all. And ive been digging through the build for a week. Im running it now. All internation j7 roms flash with this builds kernel, but reboot in the setup wiz, so once we get a good base there will be a ton of ports in this community. Also, we have found, edge screen, blf, high performance mode, and aod hidden but inactive in the phone. This build is something amazing folks.
Btw, sammobile is a useless, slow dinosaur. Updato via playstore is the best source for firmware.
fullofhell said:
Tmobile received the update from samsung on 8/28. They filled it with their garbage and sent it last thursday, most of us flashed aqf1 stock and got it ota friday morning.i dont see any clerical errors or anything like that at all. And ive been digging through the build for a week. Im running it now. All internation j7 roms flash with this builds kernel, but reboot in the setup wiz, so once we get a good base there will be a ton of ports in this community. Also, we have found, edge screen, blf, high performance mode, and aod hidden but inactive in the phone. This build is something amazing folks.
Btw, sammobile is a useless, slow dinosaur. Updato via playstore is the best source for firmware.
Click to expand...
Click to collapse
I would like to have the edge screen without installing a Rom you think is possible?.
carlosbalbuena_ said:
I would like to have the edge screen without installing a Rom you think is possible?.
Click to expand...
Click to collapse
Not sure. It isnt working yet.
Will this work for the metro pcs variant ( SM-J700T1) as well?
hightech316 said:
Will this work for the metro pcs variant ( SM-J700T1) as well?
Click to expand...
Click to collapse
I think so..i got edge lighting to work. Im writing each csc tweak down and will include them in our next build.see photo,.this is native in the stock firmware
Has anyone flashed this update on their metro J7?
Does this update contain t-mobile bloat?
hightech316 said:
Has anyone flashed this update on their metro J7?
Does this update contain t-mobile bloat?
Click to expand...
Click to collapse
flash the aqf1 metro firmware, then take update to 7.1.1 ota. Then u will have metro nougat
fullofhell said:
Not sure. It isnt working yet.
Click to expand...
Click to collapse
And the Performance mode got it by installing some application or what?
carlosbalbuena_ said:
And the Performance mode got it by installing some application or what?
Click to expand...
Click to collapse
Download csc editor by wanam via playstore its in one of those...u look thru and change each item to "true" then reboot. Its called performance tuning
fullofhell said:
Download csc editor by wanam via playstore its in one of those...u look thru and change each item to "true" then reboot. Its called performance tuning
Click to expand...
Click to collapse
Ok bro I'm going to try and the edge lighting like it did
I got the stock ROM deodex and services jar modded but when I connect it to my lab top it don't come up unless I go and turn off USB debugging
mario1634 said:
I got the stock ROM deodex and services jar modded but when I connect it to my lab top it don't come up unless I go and turn off USB debugging
Click to expand...
Click to collapse
This firmware is being a arsehat for me too.
When I flashed the original boot img. Now my lab top able to see my phone. It crazy because I can still pull and push but programs like assayyed don't see it until I flash stock boot img
mario1634 said:
When I flashed the original boot img. Now my lab top able to see my phone. It crazy because I can still pull and push but programs like assayyed don't see it until I flash stock boot img
Click to expand...
Click to collapse
Weird af
fullofhell said:
flash the aqf1 metro firmware, then take update to 7.1.1 ota. Then u will have metro nougat
Click to expand...
Click to collapse
Great, thanks!
Once I have time I'll upload a rooted nandroid
Safe to flash through TWRP while rooted with xposed? Or should I disable xposed and uninstall root? Also, should I wipe when flashing or does it matter
phoen1x74 said:
Safe to flash through TWRP while rooted with xposed? Or should I disable xposed and uninstall root? Also, should I wipe when flashing or does it matter
Click to expand...
Click to collapse
U cannot in any capacity flash a stock firmware with twrp.u have to wipe your whole phone and go to download mode and flash the firmware via odin. Dont forget to unzip the file first so u have the unzipped form of it loaded in the ap slot
Aight I'm chill (no way at all to update without wiping my phone?) Like what if I don't wipe and flash in odin; will that lead to problems?
phoen1x74 said:
Aight I'm chill (no way at all to update without wiping my phone?) Like what if I don't wipe and flash in odin; will that lead to problems?
Click to expand...
Click to collapse
U could if u werent rooted or had twrp installed..if u dont wipe before odin, it will prob fail until u wipe it honestly.
hi everyone, I just bought a s7 edge from internet the thing is I'm french and received an at&t model ( what a mistake I wanted the exynos ) well the phone works but can't update it how could a I do to put nougat and later oreo if it come to this device? is it possible to take out that at&t and just have a rom s7. (sorry for my english I didn't find it in french) thanks a lot for your anwser.
android:6.0.1
baseband:G935AUCS4APK1
Download this U firmware and install using odin. It's a universal firmware for the AT&T S7 Edge, does not have any AT&T crap on it. It also doesn't have VoLTE & wifi calling, but who cares, it works just fine. I have an AT&T S7 Edge and I'm using this myself. I love it and it always get the OTA updates fast. This is the latest firmware with the January security patch. Enjoy and hope this helps. This is Android 7.0 Nougat
935U Firmware G935UUES4BRA1 for AT&T S7 Edge
Thanks I will try this this week end.
ytaida said:
Download this U firmware and install using odin. It's a universal firmware for the AT&T S7 Edge, does not have any AT&T crap on it. It also doesn't have VoLTE & wifi calling, but who cares, it works just fine. I have an AT&T S7 Edge and I'm using this myself. I love it and it always get the OTA updates fast. This is the latest firmware with the January security patch. Enjoy and hope this helps. This is Android 7.0 Nougat
935U Firmware G935UUES4BRA1 for AT&T S7 Edge
Click to expand...
Click to collapse
I tried it but odin tells me model dismatch which it's a bit weird i used odin 3.12.3. how did you flash it ?
n1n158300 said:
I tried it but odin tells me model dismatch which it's a bit weird i used odin 3.12.3. how did you flash it ?
Click to expand...
Click to collapse
Follow the instructions on this guide but use the Nougat G935UUES4BRA1 firmware you downloaded;
Samsung SM-935U firmware install guide on SM-935A device
I used this version of ODIN by princecomsy
Hope this helps.
ytaida said:
Follow the instructions on this guide but use the Nougat G935UUES4BRA1 firmware you downloaded;
Samsung SM-935U firmware install guide on SM-935A device
I used this version of ODIN by princecomsy
Hope this helps.
Click to expand...
Click to collapse
Thanks I will try it later And let you know
ytaida said:
Follow the instructions on this guide but use the Nougat G935UUES4BRA1 firmware you downloaded;
Samsung SM-935U firmware install guide on SM-935A device
I used this version of ODIN by princecomsy
Hope this helps.
Click to expand...
Click to collapse
Thanks man it works perfectly with princecomsy Odin
i need help
my phone is also us version and its still marshmallow. can i try this one?
and do i need to back up first?
ytaida said:
Follow the instructions on this guide but use the Nougat G935UUES4BRA1 firmware you downloaded;
Samsung SM-935U firmware install guide on SM-935A device
I used this version of ODIN by princecomsy
Hope this helps.
Click to expand...
Click to collapse
Hi I coming to you again just to know if you faced the same issue than me. I just realized that my GPS is not working anymore since then. If you know anything about it. Thanks
n1n158300 said:
Hi I coming to you again just to know if you faced the same issue than me. I just realized that my GPS is not working anymore since then. If you know anything about it. Thanks
Click to expand...
Click to collapse
Everything is working on my AT&T Galaxy S7 Edge, including my GPS running the 935U firmware. By the way the firmware was just updated to G935UUES4BRC1 March security patch.
ytaida said:
Everything is working on my AT&T Galaxy S7 Edge, including my GPS running the 935U firmware. By the way the firmware was just updated to G935UUES4BRC1 March security patch.
Click to expand...
Click to collapse
Yeah he did the update OTA which it's nice that's mean I will get the next one much easier. Ok i actually wanted to wipe cache so I restart on recovery mode. And it just put me a yellow triangle and it was write no command :/ I don't think that's normal I have to find something but thanks
ytaida said:
Everything is working on my AT&T Galaxy S7 Edge, including my GPS running the 935U firmware. By the way the firmware was just updated to G935UUES4BRC1 March security patch.
Click to expand...
Click to collapse
Is it normal that the download to your file is very slow?
Darklight_93 said:
Is it normal that the download to your file is very slow?
Click to expand...
Click to collapse
The latest firmware update is G935UUEU4BRD1 April Security Patch. I always update OTA via the software update in the setting menu and it downloads quick.
ytaida said:
The latest firmware update is G935UUEU4BRD1 April Security Patch. I always update OTA via the software update in the setting menu and it downloads quick.
Click to expand...
Click to collapse
Can someone help me out? I am trying to install the last update you just posted but I am not able to do that... I can't find the PIT file... any help?
Darklight_93 said:
Can someone help me out? I am trying to install the last update you just posted but I am not able to do that... I can't find the PIT file... any help?
Click to expand...
Click to collapse
What firmware version are you on right now? If you want to go to SM-G935U then you have to start with the base of January and then update from there via OTA.
n1n158300 said:
Yeah he did the update OTA which it's nice that's mean I will get the next one much easier. Ok i actually wanted to wipe cache so I restart on recovery mode. And it just put me a yellow triangle and it was write no command :/ I don't think that's normal I have to find something but thanks
Click to expand...
Click to collapse
Just so there's no confusion here, no one person "updated it OTA". What you have is an official U rom which fetches updates whenever Samsung pushes them out.
Aaron78 said:
What firmware version are you on right now? If you want to go to SM-G935U then you have to start with the base of January and then update from there via OTA.
Click to expand...
Click to collapse
I am at the 2016 update...
Darklight_93 said:
I am at the 2016 update...
Click to expand...
Click to collapse
If your on the U version, then go to Settings then Software Update and then tap Download Updates Manually. It should force an update. If not, download the updates from Sammobile and flash them using Odin.
ytaida said:
The latest firmware update is G935UUEU4BRD1 April Security Patch. I always update OTA via the software update in the setting menu and it downloads quick.
Click to expand...
Click to collapse
Thank you! My S7 Edge ATT SM-G935A is on Marshmallow 6.0.1 now. Can I flash directly to the latest version or I need to go from the base on first and go 1-by-1 up to the latest?
I try with Odin but it is not...please.
Try to download latest 6.0 frimware but I think bootloader is locked and it's impossible.
Have you tried with ticking bootloader option i Odin ?
anarasgarli said:
Try to download latest 6.0 frimware but I think bootloader is locked and it's impossible.
Click to expand...
Click to collapse
oh yes..
Sparkynis said:
Have you tried with ticking bootloader option i Odin ?
Click to expand...
Click to collapse
yes.
nm180618 said:
I try with Odin but it is not...please.
Click to expand...
Click to collapse
I believe i read somewhere on here that you can only flash the same bootloader version as 8.0 is version 2 so the only one you can downgrade to is one with bootloader version 2 and that is 7.0 i understand. Correct me if i am wrong though,
daveparki said:
I believe i read somewhere on here that you can only flash the same bootloader version as 8.0 is version 2 so the only one you can downgrade to is one with bootloader version 2 and that is 7.0 i understand. Correct me if i am wrong though,
Click to expand...
Click to collapse
Correct.
Find 7.0 Firmware that is at least March 2018 or newer (Binary 2 Rom) to downgrade from 8.0 Oreo
benjamen50 said:
Correct.
Find 7.0 Firmware that is at least March 2018 or newer (Binary 2 Rom) to downgrade from 8.0 Oreo
Click to expand...
Click to collapse
Just download the firmware for 6.0.1 and flash it in odin, I've done it several times and it works very nicely.
I'm surprised they would allow 6.0.1 firmware to flash what model is your phone sm-g935f and was it on 8.0?
BL code drops to 6.0 without code but network goes
daveparki said:
I believe i read somewhere on here that you can only flash the same bootloader version as 8.0 is version 2 so the only one you can downgrade to is one with bootloader version 2 and that is 7.0 i understand. Correct me if i am wrong though,
Click to expand...
Click to collapse
yes only the latest 7.0 firmware
Hello,
I downgraded to 6.0 but phone is now stuck in boot loop and i'm unable to access recovery mode.
I'm only able to access download mode.
Please how can i resolve this problem?
Hey guys, who knows do we have option like — flash fw with older bootloaders and then do isolated new bootloader flash to make older fw work?
Something like that, because i "heard" similar tricks in internet, like people are flashing modem and bootloader bins separately after downgrade flashing like from android 8 to 6. But didn't find proper instructions on that.
Is it possible? Is there instruction out there?
Yeah, oreo is better than nougat and yeah yeah new features, new updates blablabla. I just believe that every device is always better with its first software - we all saw and know how Apple does, i dont think that other companies dont do something like this...after masscopy of notches personally i dont have any doubts...why you think samsung "upgrades" this bootloader sh*t? It's the same thing like it was with iphone 4s - no downgrade option, and "upgraded" version of fw forcedly reduced the work of processor and other performances - you forced to BUY new one. Same politics in Samsung.
Well, for me marshmallow is better than all others in using S7 - it's faster and bugfree than nougat or oreo, yes it's oldy and even some basic performance features not exist, but still android 6 is the best for S7. I used custom roms but they are really buggy, badly buggy, definitely not a choice for everyday using. Oh i missed the days with nexus phones...not pixels.
Advice
Alex-M8 said:
Just download the firmware for 6.0.1 and flash it in odin, I've done it several times and it works very nicely.
Click to expand...
Click to collapse
my friend you were correct she worked said failed after BL CP gave it a shot with hydrarom and she loaded right up to my amazement!!!
thxs
mark5150 said:
my friend you were correct she worked said failed after BL CP gave it a shot with hydrarom and she loaded right up to my amazement!!!
thxs
Click to expand...
Click to collapse
Explain bro..how is the performance? How it feels?
Hello,
Recently I've updated my Galaxy S8 g950fd from Android 8.0 to 9.0, however i found it terrible and I would love to go back to 8.0. I've read many topics and all of them states that I have to downgrade it through the Odin. I've downloaded a few softs from websites:
SM-G950F_1_20181227130827_c3nriwjmas_fac
G950FXXS4CRLB
G950FXXS4CRLB_G950FOXM4CRL1_LYS
G950FXXU3CRGH_CL14023573_QB19093103
G950FXXS4CRLB_G950FOXM4CRL1_LYS
G950FXXU1AQG5_G950FOXM1AQG5_ZTO_4file
And non of them works. Odin keep showing FAIL message, phone stuck on bootloop and the only software I can use is 9.0 ( G950FXXS5DSF1_OXM5DSF1_(SM-G950FD))
At this moment I'm downloading 2 firmwares from sammobile.com website: XSG-G950FXXU4CRL3-20181218135110 and XSG-G950FXXS4CRLB-20190128142840 and I hope they will resolve the issue I'm facing.
What am I doing wrong? Is there any other way to downgrade my phone?
Thanks a lot for replies!
Your bootloader version is v5 and all other firmware including previous pie and all Oreo firmware are at v4 . If u installed June or July update on your phone then u can't go back anymore and thus Odin keep faling for your
Scorpionea said:
Your bootloader version is v5 and all other firmware including previous pie and all Oreo firmware are at v4 . If u installed June or July update on your phone then u can't go back anymore and thus Odin keep faling for your
Click to expand...
Click to collapse
What about going back to 8.0 through TRWP? Impossible?
I've found this thread: https://forum.xda-developers.com/galaxy-s8/help/s8-downgrade-version-9-t3922577 and I've downloaded G955USQU5CSA4_G955UOYN5CSA4_CCT.zip
G955USQS5CRL1_G955UOYN5CRL1_USC.zip
G955USQU5CSA4_G955UOYN5CSA4_LRA.zip
G955USQU5CRK1_G955UOYN5CRK1_TMB.zip , however when I try to install s8+ firmware through Odin it keeps showing FAIL. Damn.. No other way to go back to 8.0 than new phone?
sssylaru said:
What about going back to 8.0 through TRWP? Impossible?
I've found this thread: https://forum.xda-developers.com/galaxy-s8/help/s8-downgrade-version-9-t3922577 and I've downloaded G955USQU5CSA4_G955UOYN5CSA4_CCT.zip
G955USQS5CRL1_G955UOYN5CRL1_USC.zip
G955USQU5CSA4_G955UOYN5CSA4_LRA.zip
G955USQU5CRK1_G955UOYN5CRK1_TMB.zip , however when I try to install s8+ firmware through Odin it keeps showing FAIL. Damn.. No other way to go back to 8.0 than new phone?
Click to expand...
Click to collapse
U can root the phone and try some of the old custom based rom on Oreo, officially u can't go back
S8
Scorpionea said:
U can root the phone and try some of the old custom based rom on Oreo, officially u can't go back
Click to expand...
Click to collapse
I've found Lineage 15.1 OS with bootloader v5 on android 8.0 however I am struggling now with installing TWRP. Keep getting FAIL in ODIN and note in phone: Only official relased binaries are allowed to be flashed (RECOVERY). I've tried to reset cache, perform factory data, OEM is enabled and usb debugging as well. I don't know what's going on to be honest and after reviewing thousands of posts - I can't fix that issue.. My current software on my g950fd is G950FXXU5DSFB Android 9.0.
Is here anyone who can advice me what should I do? I would really appreciate that. Thanks!
Anyone?
Sorry can't help you with that much, it seems u did all correct steps for rooting the phone. dunno why u get only official binary message.
Edit:
Post your issue here, maybe someone here can help you more
https://r.tapatalk.com/shareLink?ur...share_tid=3847712&share_fid=3793&share_type=t
Scorpionea said:
Sorry can't help you with that much, it seems u did all correct steps for rooting the phone. dunno why u get only official binary message.
Edit:
Post your issue here, maybe someone here can help you more
https://r.tapatalk.com/shareLink?ur...share_tid=3847712&share_fid=3793&share_type=t
Click to expand...
Click to collapse
Thanks! I try!