Hi Guys,
I'm a newbie on developing, I'm searching someone who can help me to make a custom kernel for our phone.
I've already made a fork from Rox source kernel, I've added (for now):
- intellidemand governor
- intelliactive governor
- Intelli thermal 1 & 2 from the greatest Faux
I want to made a good kernel with good performance but.. I'm new and I need your help!
Who can help me?:crying:
Edit: for now i've done:
- CPU underclock to 249 Mhz
- GPU Overclock to 533 Mhz
Removed intellithermal (will be replaced with francisco franco one)
Removed intellidemand due to FC (maybe a my error, i will retry later)
Here is my github, any help is appreciated
https://github.com/sev3n85/android_kernel_samsung_s3ve3g
sev3n1985 said:
Edit: for now i've done:
- CPU underclock to 249 Mhz
- GPU Overclock to 533 Mhz
Click to expand...
Click to collapse
The gpu overclock from 450 to 533 works with your kernel ?
Can you share a compiled boot.img pls
pad11 said:
The gpu overclock from 450 to 533 works with your kernel ?
Can you share a compiled boot.img pls
Click to expand...
Click to collapse
It's a bit unstable, lots of FC and soft reboot. I'm finding where is the problem. When everything works well i will share it in alpha preview
sev3n1985 said:
It's a bit unstable, lots of FC and soft reboot. I'm finding where is the problem. When everything works well i will share it in alpha preview
Click to expand...
Click to collapse
would be awesome, thanks. there is also a ram-bus overclock to 533 (instead of 400) possible for msm8226
Xiaomi Redmi 1S got same specs like our s3 neo.
Xiaomi Redmi 1S got good kernels and you my copy some fututes for cm12 kernel base and try to imlated to our s3 neo for rox cm12 development.
Hope im help you a little. Good luck.
So how's it all going?
Hi and welcome on forum.
I in this forum quite while but only just for read and collecting information.
I have Nexus 10 with AICP 6.0.1. To unlock potential of this tablet i install custom kernel from @Khaon.
In first post its stated:
- UV and OC both for the GPU AND CPU supported
Unfortunately i can only increase CPU speed as well as CPU voltage.
I don't have option to change GPU frequency.
To do this im using "Kernel Adiutor".
Can you help me with my question??
Regards
HipHopAst said:
Hi and welcome on forum.
I in this forum quite while but only just for read and collecting information.
I have Nexus 10 with AICP 6.0.1. To unlock potential of this tablet i install custom kernel from @Khaon.
In first post its stated:
- UV and OC both for the GPU AND CPU supported
Unfortunately i can only increase CPU speed as well as CPU voltage.
I don't have option to change GPU frequency.
To do this im using "Kernel Adiutor".
Can you help me with my question??
Regards
Click to expand...
Click to collapse
Sorry for the late reply.
it is normal you don't see anything in kernel audiutor because :
1) latest kernel of mine( marshmallow) was started from scratch and I didn't add gpu support
2) kernel audiutor 's design doesn't allow to easily include gpu control for our device. The easiest solution i could find was to edit some init.d script.
Now that I got more time I will include again my gpu patches so gpu full control is back
Hi
i found in a few roms actually Nexus 2.5 that you can add more Govenors and Schedulers.
Is it so tricky to add this in the Vibe UI MTK boot.img?
What i really need is SmartassV2 or Lulzactive as govenor and Sio or Fiops Scheduler for Vibe UI.
What i know is that you need the kernel Source and build it from new. But I´m too stupid for that.
It exceeds my spiritual intelligence
Hi everyone! After a couple of days working on ubuntu, I have built my own kernel
If you enjoy my work, please press Thank button
I AM A STUDENT, NOT A DEVELOPER. I CANNOT FIX ALL ERRORS. I WORKING BEST OF ME
Changelog:
V0.1:
OverClock CPU up to 1,78ghz (max speed My lumia can run. If force kernel run with 1,8ghz and up,my phone is freeze,dont boot)
OverClock GPU up to 500mhz (i need confirm GPU can run with speed or no because always i can see GPU running with speed 400mhz)
Fast Charge : yeah,it is working
Bluetooth is working now can send ,recive file and go to internet (only for lumia 720)
Tested on CM13.0
Link download: post 2
XDA:DevDB Information
Kernel modified for Lumia 52x,720, Kernel for the Windows Phone 8 General
Contributors
thinhx2, feherneoh, banmeifyouwant, PecanCM,thichthat,Nicklas Van Dam
Source Code: https://github.com/thinhx2/kernel_nokia_msm8x27
Kernel Special Features:
Version Information
Status: Alpha
Created 2017-01-12
Last Updated 2017-01-12
Link:
boot: https://drive.google.com/file/d/0B-TpiHEnTdWrTERFSlc4NDA1ZlE/view?usp=sharing
kernel (if you need to port rom ): https://drive.google.com/file/d/0B-TpiHEnTdWrdkJ1MEFicFV4SGs/view?usp=sharing
How to install this on Lumia 720? Does calling work?
[No message]
everything works on the rm-914 lumia only thing thats broken is the WI-FI
cooldude20000 said:
everything works on the rm-914 lumia only thing thats broken is the WI-FI
Click to expand...
Click to collapse
I will update kernel when i have lumia 52x again
Gabriel Kernel for Stock MIUI and AOSP Based Roms
Telegram Channel
GLOBAL OPTIONS:
Kernel support both MIUI/AOSP
Kernel Supports both Clang & GCC Compilers
Kernel updated up to 3.18.115 build.
Kernel updated up to CAF-LA.UM.6.6.r1-09000-89xx.0
Kernel include advanced binder driver from main line 4.10.y kernel.
Kernel include advanced KSM driver (UKSM, operate with selectable cpu governor/usage).
Kernel has enabled crypto ARM64 CRC32 hw accelerated module and its friends.
Kernel operate in 300HZ
Kernel include Enhanced TCP methods
Kernel include latest F2FS driver for 3.18.y
Kernel include ZEN,NOOP,BFQ,DEADLINE,CFQ,FIOPS,FIFO,ROW,SIO,MAPLE I/O govs tuned for SSD.
Kernel includes Impulse, Cultivation, Lionfish, Interactive, Conservative, Ondemand, Performance CPU GOVS.
Kernel default CPU GOV is patched and tuned Interactive.
Kernel support FSYNC mode for FS. (Off at Screen-On & will be On at Screen-Off)
Kernel support thermal driver tuning.
Kernel includes updated EXFAT drivers.
Kernel includes support for Haptic Feedback (vibrate) tuning (more/less)
Kernel include boost to I/O by mounting partitions with optimized flags.
Kernel has enabled process-reclaim (moving apps to zram without killing them).
Kernel support lz4 compression for zram and max 8 core streams.
Kernel will add advanced busybox binary in /sbin/busybox
Kernel will set power-saving config at Screen-Off and back to normal at Screen-On
Kernel will stop logging drivers at Screen-Off and back to normal at Screen-On
Kernel include state-notifer to say system-state to io/governors to save power.
Kernel has disabled some debugging options to improve the system performance.
Kernel 9.0
*Upstream to 3.18.115
*Merge CAF tag LA.UM.6.6.r1-09000-89xx.0
*Merge Prima Wlan CAF tag LA.UM.6.6.r1-08600-89xx.0
*Merge latest Code update to f2fs
*merge massive update to power, irq, kernel scheduler from msm 4.2.y & 4.4.y
*Merge massive update to cpu driver from msm 4.4.y (cpu 8998/snapdragon 835)
*Merge update to cpuidle from msm 4.4.y
*Merge update to devfreq from msm 4.4.y
*Merge certificate handling from msm 4.4.y
*Merge update to printk from msm 4.4.y
*Merge DTS eagle sound
*Merge update to wireguard
*Merge official charger/battery driver
*Merge few kernel improvement from pixel 2 & sony experia devices
*Merge fix to offline charging led
*Removed VDSO32 (32bit Driver)
*Introducing gabriel/gabriel-plus governor with idle load treshold & timing (based on pixel 2 p-preview interactive Governor)
*Overclock little cluster up to 1.26 MHz
*Overclock gpu up to 575 MHz
*Introduce init process fixer
*Introduce charger current limiter
*Fixed battery stats
*Fixed clock flag no rate cache
*Patch key layout at flashing time
*Add sd card deferred resume (save power wile not using)
*Add target os detector to kernel flasher (anykernel2)
*Treble and non-treble builds combined into one kernel package (AOSP)
*Disable clock scaling for msm sdhci
*Kernel package signed
*Run fstrim at flashing time
*Show kernel version as banner at flashing time
*Add clang support
*Busybox update to latest code changes
*Few improvements in stweak options
*Fixed gpu governor & frequency set
*Fixed setting per governor profile
*Add gabriel memory config
*Reworked profiles
note:
*Compiled with Dragontc 7.0
Kernel 8.0
*Upstream to 3.18.105
*Merge CAF tag LA.UM.6.6.r1-07400-89xx.0
*Merge Prima Wlan CAF tag LA.UM.6.6.r1-07400-89xx.0
*Merge latest Code update to f2fs
*Stweak has control over Performance Daemon
*All Profiles will reset at 1st boot
*Build with 3 different toolchain in 2 different library support (bionic & glibc like past) & 3 different optimization support!
*Gnu gccs compiled by me with latest stable libs & bins
*The regular build like previous builds has no extra character to it's package name (built with hz300 & linaro 7.3 & ofast & graphite gcc flags)
*H3 : Hz300 & o2 & no grapgite flag
*H1 : Hz100 & o2 & no grapgite flag
*B : Bionic toolchain
*7.3 & 6.4 : Gnu gcc 7.3.0 & 6.4.0
*Hz 100 should keeps more battery backup
*You may get better battery backup with Hz100 & gcc 6.4.0
Kernel 7.0
*Kernel Codes Compiled with new Linaro GCC 7.3.1 2018.03(compiled by me)
*Merge Kernel tag CAF-LA.UM.6.6.r1-07200-89xx.0
*Kernel has Reduced "Screen ON" delay (affect on fp unlock)
*Implement Finger Print Boost (boost availalbe cores on fp unlock)
*Kernel has been Disabled Debug Kernel
*Merge Codes Update to Kernel Scheduler
*Merge CPU, CPU_STATS, CPU_IDLE from mainline 4.2.y & 4.4.y
*Merge Interactive & Conservative gov family, Ondemand from mainline 4.4.y
*Remove Lionfish gov
*Kernel Overclocked LITTLE Cluster to 1.34 MHz
*Merge Led driver from Xiaomi Official Source
*Kernel with Official Drivers not Supported for Now
*Stweak has Control over CPUSET
*Stweak has Control over Fingerprint Boost
*Stweak has a Module to Restore Kcal parameters at "Screen ON" state (fix MIUI kcal/panel bug)
Kernel 6.0
*Kernel Updated to 3.18.102
*Kernel Codes Compiled with new Linaro GCC 7.2.1 2018.01(compiled by me)
*Merge Kernel tag CAF-LA.UM.6.6.r1-06700-89xx.0
*Merge Prima WLAN tag CAF LA.UM.6.6.r1-06700-89xx.0
*Merge Codes to ARM64, RCU, Kernel Core & Scheduler Driver from main line 4.4.y
*Merge VDSO32 (32bit Driver) from main line 4.4.y (compiled with GCC Linaro ARM32 7.2.1)
*Busybox Updated to Latest Code Changes (compiled by me)
*Kernel has MIUI F2FS Support & Dtiver Updated to Latest Code Changes
*Kernel codes compiled with Ofast & Graphite Optimization Flags
*Kernel has USB HID gadget suport
*Merge CPU Governor Alucard, Darkness, Nightmare, Chill, Relaxed
*Merge update to SDCARDFS
*Kernel has CPU & GPU Underclock/Overclock
*Kernel Boot UP With Stock CPU Frequencies
*Kernel Flasher will Backup Current Boot (kernel image & ramdisk) and Modules for MIUI Rom in case of Restoring/Uninstalling the Kernel to Previous one
*Add Adreno-Idler support
*Add Stweak Support
*Stweak has 7 Predifined Profile
*Stweak has Control over big.LITTLE Clusters Control
*Stweak has Control over Awake & Suspend state for CPU, GPU, HMP,I/O Scheduler, UKSM, etc
*Stweak has Per Cluster & Governor Profiling
*Stweak has F2FS Searching Boost option
*Stweak has Advance Memory Control options
*Stweak has Auto Clear Ram Cache Switch (affect on multitasking/Performance)
*Stweak has Control over ZRAM & SWAP Disk
*Stweak has Control over WIFI, init.d, ADB, Sound, Battery, Dmesg state
*Stweak has Control over ROM's MIN/MAX backlight value
note:
*Kernel Uploaded into 2 Separate Build with Official & UNOfficial Drivers
*Official Build Has More CPU Overclock Steps
*Official Build Can't Mount OTG Drive at This Time
*To Convert EXT4 to F2FS Follow this Instruction
Kernel 5.0
*Kernel Updated to 3.18.93
*Kernel Codes Compiled with new GNU GCC 7.3.0 (compiled by me)
*Busybox Updated to Latest Code Changes (compiled by me)
*Implement Adreno Idler
*Add 100 & 160 MHz GPU Frequencies
*Adreno Idler & GPU Clock Tuned for Power Saving
*Implement Force Fast Charge (disabled by default)
*Merge Updates to CFQ IO-Scheduler
*Merge Update to BFQ IO-Scheduler (v8r12)
*Merge Updates to Interactive Governor
*Inject SQLITE3 Bin to Rom for DB-Optimization (needs command/script, attached to this post)
*Remove Code Changes to Touchscreen Driver (initial fix for dt2w issue)
*Kernel Boot Script run FSTRIM at Boot
*Fix & Tune Core Control (4 cores online 2 big+ 2 LITTLE)
Kernel 4.0
*Enable 19 MHz GPU Frequency
*Implement Kcal Colour Control (works with non-stock roms)
*Implement Backlight Dimmer
*Different LMK & Zram Config for 2/3/4 GiB Ram Variants
*Cortex Keeps 4 (2 big & 2 Little) Cores online at Sleep State
*Merge MDSS Codes to Avoid Underrun Risk while Changing Clock & Bandwidth
Kernel 3.0
*Merge Advance Zram & Zsmalloc driver from main line 4.6.y
*New Zram driver has 2 new Compression algorithm (lzo, lz4, [lz4hc, deflate])
*New Zram driver has Per-CPU Compression Streams
*New Zram driver use Crypto Compression API
*Merge Workqueue driver from main line 4.4.y
*Merge Random driver from main line 4.4.y
*Implement Sound Control
*Implement FRandom
*Merge update to IPA
*Fix Boot Script Failure with Magisk 15.3
*Tune Interactive Gov
*Merge update to Bitmap Lib
*Merge update to Kgsl, Devfreq, ARM64 & Kernel Scheduler
*Simplified Cortex Script for While Leaving the Sleep State
Kernel 2.0
*Upstream to 3.18.92
*Implement Boeffla wakeock-blocker v1.1.0
*Implement DT2W/S2W
*Cpuset disabled
*Merge update to Kernel Scheduler
*Merge update to RCU (how drivers talks to kernel)
*Disabled extended HMP drivers, use Generic HMP and related drivers
*Merge fixes for high load average and queuing works on power-efficient workqueue
*Merge fixes to led-flashlight
*Merge fixes to Battery/Charger
*Merge IPA fixes from caf-tag LA.UM.5.6.r1-05400-89xx.0 (internet packet accelerator)
*Merge fixes to Xiaomi Colour and Contrast
*Entropy Tweaks at Startup
*Separated to 2 Builds for MIUI and AOSP Based Roms
*Selinux is Permissive for Oreo and Enforcing for Nougat
Kernel 1.0
*All options in the global options list
*Selinux is in enforcing mode, so won't boot current oreo rom.
*Software CRC control is Off
*Doesn't support F2FS for Stock Rom at this time but AOSP.
*Doesn't support LCD Gestures, D2W,D2S,S2S
Instruction
if you came from a custom kernel, please restore your rom's stock kernel then flash.
as always, unlocked bootloader and flash in twrp
Flash at you own Risk !
There is a file named "build.log" in kernel zip file
that says which branch i used for build process.
Download Folder
AFH directory,beta & stable builds
Global Credits!
noyer for kernel source
rainforce279
dorimanx
asiier
sonicron
Cyanogen/LineAge/Code Aurora for many kernel mods
To all my sources in GITHUB!
XDA:DevDB Information
Gabriel Kernel, Kernel for the Xiaomi Redmi 4X
Contributors
mostafaz
Source Code: https://github.com/mostafa-z/Gabriel_msm8940_mi-redmi4x
Version Information
Status: Testing
Created 2018-01-17
Last Updated 2018-01-17
does this support double tap to wake.?
AmirulR said:
does this support double tap to wake.?
Click to expand...
Click to collapse
no, i'll mention
can i use this kernel for Nitrogen OS 8.1 ?
Bang Onik said:
can i use this kernel for Nitrogen OS 8.1 ?
Click to expand...
Click to collapse
I think oreo works with permissive selinux for now. No its enforcing
Wooow ? . . features are awsome but Nougat outdated dude can u plzz make it for Oreo there is no custom kernel supported oreo so plzz look intoit (is any way to change selinux to perm on ur kernel zip??)
Jazakallah brother.
Will it work on MIUI along with VoLTE...?
Because kernels work on MIUI but breaks VoLTE, is it fixed in your kernel?
Ramakrishnan ? said:
Wooow ? . . features are awsome but Nougat outdated dude can u plzz make it for Oreo there is no custom kernel supported oreo so plzz look intoit (is any way to change selinux to perm on ur kernel zip??)
Click to expand...
Click to collapse
After boot yes but it should be native. I mean i dont think so. If u flashed oreo and selinux is permussive so u can wait for next release please
Ali_Waris said:
Jazakallah brother.
Will it work on MIUI along with VoLTE...?
Because kernels work on MIUI but breaks VoLTE, is it fixed in your kernel?
Click to expand...
Click to collapse
Thanks
I don't have it. Cant prove
Does it support in oreo
[email protected] said:
Does it support in oreo
Click to expand...
Click to collapse
Sorry. Won't
Im new to xiaomi
Dont have oreo yet
mostafaz said:
Thanks
I don't have it. Cant prove
Click to expand...
Click to collapse
Which ROM are you currently using? Can you suggest a ROM that works fine with your kernel?
mostafaz said:
Sorry. Won't
Im new to xiaomi
Dont have oreo yet
Click to expand...
Click to collapse
OK.... But nice work dev.......
Ali_Waris said:
Which ROM are you currently using? Can you suggest a ROM that works fine with your kernel?
Click to expand...
Click to collapse
Im with stock 9.1.1.0 global
I just checked aosp boot and dmesg.
mostafaz said:
Im with stock 9.1.1.0 global
I just checked aosp boot and dmesg.
Click to expand...
Click to collapse
If you are on miui global with this kernel, can you please confirm whether VoLTE works on not? (If by any chance you can verify it with a JIO sim, please.)
Ali_Waris said:
If you are on miui global with this kernel, can you please confirm whether VoLTE works on not? (If by any chance you can verify it with a JIO sim, please.)
Click to expand...
Click to collapse
My provider newly have it but i dont have it
Wait some for others
Do I need to reflash my rom to make it work?
Jazakallah my friend
Will test later
Sent from my Redmi 4X using Tapatalk
Kecoe said:
Do I need to reflash my rom to make it work?
Click to expand...
Click to collapse
Stock or AOSP? Both nougat works. No need to do anything. Flash kernel & root method. Done
I'll share for oreo later
Please make a variant with permissive selinux for oreo, and overclocked GPU will be great feature.
I have flash it and my wifi is not working even i flash the wifi fix.. Btw good kernel :good: