Database Users

Can you help me figure out my provlem w/ Phone

Yesterday my phone just went pitch black when i was using it tge only lights on were the back button and the menu one beside the home button. Nothing worked. Power. 3 button both recovery and downloading. So i pulled the plug and took the battery out. When i turned it on i noticed my theme went back to the stock one. All my user data was erased. No apps were installed. Market maps and youtube have an icon on main page but say "application not installed on phone" when i click on it. My camera wont work either it says "Turn off usb storage before using camera" when i go to my gallery/music player/video player/voice recorder it says "SD card unmounted or not present" and when i use My files it says "Your phone does not have an SD card inserted"
Has anyone seen problems like this at all? If so can you tell me how to fix it please cause this phone was hella expensive and all it is right now to me is an expensive phone bill that i cant use features for...

Are you using an external sd card?
Sent from my GT-I9000 using XDA App

I have one but its not in the phone. I took it out a week or two ago.before it happened

Are you familiar with 'Odin' ??
Get your self a firmware and flash it, and see how you get on.
You do have the 3 button combo right ?

Yes my 3button combo works. and i know how to use odin. can you point me into the direction of the latest firmware for bell. cause if i need to return it they will see if its on their firmware and stuff.

When im using odin i get this
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
is that ok to have the 2 coms? cause everytime ive used odin before it has always had only 1

dont use PIT file unless you have all 3 files...
So remove the PIT and flash and you should be ok. Most firmwares now only come in 1 .tar file so dont worry about it...
If the flash doesnt fix your problem, you will need all 3 files and PIT, but im not familiar with bell firmwares so you may have to do a bit of searching for that one.

This is what i have.
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
and its stuck on that. I have the I9000UGJL2.tar file in the phone part but nothing is happening.
Will a hard reset bring it back to factory settings?

I have the I9000UGJL2.tar file in the phone part
Single file its PDA in Odin unless its a modem file .
jje

Ok well ****.... Odin didnt work. so im trying to spoof with kies right now but something very very weird is happening. it says instalising... and it goes like this 1...2...3...4... homescreen for a split second. then instalising... and it goes like this 1...2...3...4... homescreen for a split second. and repeat... is my phone kinda screwed at this point?

ok... well my phone is only showing
the first screen you see when you boot.
Galaxy S GT-1900
Samsung
Is it ****ed for good now?

Gordon_Jeffries said:
ok... well my phone is only showing
the first screen you see when you boot.
Galaxy S GT-1900
Samsung
Is it ****ed for good now?
Click to expand...
Click to collapse
No its not ****ed, dont panic.
Is your download mode still working ??? Do as i said earlier with all 3 Files and PIT.
Then in Odin CHECK RE-PARTITION and when you have all 3 files + PIT loaded i.e PDA, Phone, CSC, connect your phone (in download mode) and flash it.
Make sure you Have all 3 files and make sure they are in the right section. And also make sure the firmware that came in 3 files is supportive of Bell SGS
PIT goes in PIT
PDA goes in PDA
MODEM goes in PHONE
CSC goes in CSC

@Gordon_Jeffries
Please check the followings:
* Use only the original Samsung USB-cable.
* Restart your PC and move the USB cable to another USB-port.
* Without using Odin,put the phone on download mode and connect to your PC, let your PC install the drivers, disconnect when done.
* Start Odin and load the firmware file without a pit file and no re-partition.
* Re-enter download mode, if the phone is still on download mode then you need to hold the three buttons until the phone re-enters download mode, connect to the PC and flash the firmware.
* If the flash goes well then do a wipe/factory reset from recovery.

ok well i can get it to download mode. but i dont have the CSS and or phone. does anyone know what the most current up to date bell firmware is?

it doesnt have to be a new firmware release...
Does Bell not have a single firmware in all 3 files ??
as a last resort you can use darkys resurrection (odin version) That comes in just 1 .tar file and you can use 512PIT with it..
I have used it many times to get me fixed up.... And im sure its compatible with bell (but check first)

Ive tried everything. JL2, JK3, Jk4, JH2, JPY, Darkys resurection. nothing works it just continues never ending boot screen...

Gordon_Jeffries said:
Ive tried everything. JL2, JK3, Jk4, JH2, JPY, Darkys resurection. nothing works it just continues never ending boot screen...
Click to expand...
Click to collapse
Can you enter recovery mode? If you can then do a factory reset, if that does not help and you have a 16GB Internal SD-card, then it's very likely that Internal SD-card of your device is dead.

No i cant enter recovery mode anymore. and yes i have a 16gb internal SD-card.
thats what i was hoping it wasnt... ok well i phoned bell and they said they will bring it in for sercive.

Same problem here
I have the same problem here, but i have a I9000B (Brazil) i just want to take my phone back to normal, can anyone help me?
My actual firmware: 2.3.3 I9000BVJJWW2 (its the offical one, from Kyes)
I'm not familiar with odin, but if u give any tutorial that I can follow, will help alot.
Thanks

tjacobs said:
I have the same problem here, but i have a I9000B (Brazil) i just want to take my phone back to normal, can anyone help me?
My actual firmware: 2.3.3 I9000BVJJWW2 (its the offical one, from Kyes)
I'm not familiar with odin, but if u give any tutorial that I can follow, will help alot.
Thanks
Click to expand...
Click to collapse
What you could do, is go to samfirmware.com, register and search for i9000. Or if you want to download a i9000b rom, press this link: http://hotfile.com/dl/146652827/84f8d47/I9000BVJJV3_I9000BSAMJV2_SAM.zip.html
(password is: samfirmware.com)
Just use odin to flash.
Or: http://forum.xda-developers.com/showthread.php?t=1102881&highlight=+guide+odin
(PS, search is your friend )

**NOTE 3 appears soft bricked**

i got a note 3 from my friend but it doesn't boot. it gets stuck on the boot screen "galaxy note 3 etc". i cannot enter recovery but i can get into download mode 100% of the time. it is a SM n900 appears to be an internation version. I tried flashing a stock lollipop rom using odin but ODIN 10.00 tells me fail "<ID:0/012> Can't open the serial(COM) port." and odin 10.6 gets stuck on initializing.
Tried all my usb ports.
reinstalled drivers with samsung kies
not sure where to go next, any direction would be appreciated. thanks!

flyhotstuff said:
i got a note 3 from my friend but it doesn't boot. it gets stuck on the boot screen "galaxy note 3 etc". i cannot enter recovery but i can get into download mode 100% of the time. it is a SM n900 appears to be an internation version. I tried flashing a stock lollipop rom using odin but ODIN 10.00 tells me fail "<ID:0/012> Can't open the serial(COM) port." and odin 10.6 gets stuck on initializing.
Tried all my usb ports.
reinstalled drivers with samsung kies
not sure where to go next, any direction would be appreciated. thanks!
Click to expand...
Click to collapse
1. Boot in download mode and conect your device to the pc.
2. Press the combination on your keyboard " Win + R " and write there "devmgmt.msc" (without the "") and press ENTER.
3. Make a screenshot and paste it here.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
uploaded. to mention, i dont know what was the last firmware on the device, i dont know what state it was prior to this. The knox counter was tripped and it says it has a custom binary. thanks.

bump

flyhotstuff said:
i got a note 3 from my friend but it doesn't boot. it gets stuck on the boot screen "galaxy note 3 etc". i cannot enter recovery but i can get into download mode 100% of the time. it is a SM n900 appears to be an internation version. I tried flashing a stock lollipop rom using odin but ODIN 10.00 tells me fail "<ID:0/012> Can't open the serial(COM) port." and odin 10.6 gets stuck on initializing.
Tried all my usb ports.
reinstalled drivers with samsung kies
not sure where to go next, any direction would be appreciated. thanks!
Click to expand...
Click to collapse
I presume by Odin 10.00 you mean 3.10? If so, try DL 3.09 and use that - it's what I have used all along with my Note 3. Odin is not necessarily 'latest is best' in versions.
Next, turn phone OFF and even remove battery for 10 secs or so, then start Odin and then start phone into Download mode and THEN connect it to PC - do you get the blue OK in Odin? Do you get an 'Added' in the action box?
Which firmware are you trying to flash?
Something else to try is to turn phone off, wait a bit, start using the download mode keys but press Vol DOWN to start instead of Vol UP to go into DL - sometimes lets the phone boot.

Galaxy S5 won't flash to stock OS.

Hello, I tried flashing my S5 with the new Cyanogenmod 12 but i couldn't get it to boot with a custom recovery .. it just wouldn't want to so i decided to go back to the stock OS and start fresh.
But now it won't work at all. The phone boots normally and everything . I can use it (it also says the root is still working) but when i try to flash the stock OS 5.0 it fails.. I tried many versions of Odin and even older os's .. nothing works.
What can I do to get it back to normal and then maybe install cyanogen again??
(i tried posting images but it won't let me .. i need 10 posts)

Try flashing the PIT file at the same time as the stock ROM
Post #2
http://forum.xda-developers.com/showthread.php?t=2737448

*Detection* said:
Try flashing the PIT file at the same time as the stock ROM
Post #2
http://forum.xda-developers.com/showthread.php?t=2737448
Click to expand...
Click to collapse
Only if i knew how to do that :| ..

Plenty of info in the forums if you read a few threads
Just add the PIT file to the PIT section in ODIN and the ROM to the PDA/AP section - hit start

*Detection* said:
Plenty of info in the forums if you read a few threads
Just add the PIT file to the PIT section in ODIN and the ROM to the PDA/AP section - hit start
Click to expand...
Click to collapse
Well i tried with the pit and rom .. still fail
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FXXU1POBK_G900FEVR1POBK_G900FXXU1POBE_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Set PIT file..
<ID:0/010> DO NOT TURN OFF TARGET!!
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

What version of ODIN you using?
Try 3.10.6
Or 3.09 if you've tried .6
Run it as Admin too

*Detection* said:
What version of ODIN you using?
Try 3.10.6
Or 3.09 if you've tried .6
Run it as Admin too
Click to expand...
Click to collapse
I have tried both of them + running as admin.. same error. FAILS

Got the Samsung drivers installed?
Tried a different USB cable & port?
Different PC?
You are running this from a PC, not a Mac running Windows right? Macs always fail

*Detection* said:
Got the Samsung drivers installed?
Tried a different USB cable & port?
Different PC?
You are running this from a PC, not a Mac running Windows right? Macs always fail
Click to expand...
Click to collapse
Yeah i do have the drivers installed . also tried all my USB cables and ports but i can't do it on another pc since i'm in holidays right now and i only have this laptop with me and yea is a windows pc not mac.

Running out of ideas...
Definitely chose the correct PIT file for your model S5
Reactivation lock disabled on the S5?
S5 is in 'Download' mode? Volume Down & Home & Power
Could try factory resetting the phone

*Detection* said:
Running out of ideas...
Definitely chose the correct PIT file for your model S5
Reactivation lock disabled on the S5?
S5 is in 'Download' mode? Volume Down & Home & Power
Could try factory resetting the phone
Click to expand...
Click to collapse
well i do hope is the right PIT and yes i have tried factory resetting.. I also don't know what on earth is wrong with it.

If it's a G900F, you need this PIT file
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract first before adding to ODIN
Does ODIN tell you which COM port the S5 is connected to when you have the phone connected?
It should light up at one of the top rectangle sections with COM:6 or whichever number it's using

*Detection* said:
If it's a G900F, you need this PIT file
http://forum.xda-developers.com/attachment.php?attachmentid=2721101&d=1399024091
Extract first before adding to ODIN
Does ODIN tell you which COM port the S5 is connected to when you have the phone connected?
It should light up at one of the top rectangle sections with COM:6 or whichever number it's using
Click to expand...
Click to collapse
I will try this pit now and yes it does tell me the port

OK, so we know it's not likely a driver issue then if it can see the port
Be sure your phone is the G900F though, it tells you in settings > general > about device

*Detection* said:
OK, so we know it's not likely a driver issue then if it can see the port
Be sure your phone is the G900F though, it tells you in settings > general > about device
Click to expand...
Click to collapse
Yes my phone is G901F .. does that 1 make a difference ? got it from UK - EE

CosminGCole said:
Yes my phone is G901F .. does that 1 make a difference ? got it from UK - EE
Click to expand...
Click to collapse
Yea, you need to flash everything for the G901F...
ROM and PIT need to be for the exact model
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
G901F_pit_G901FBOG1ANJ1_BOG.zip (1.2 KB, 188 views)
G901F_pit_G901FFTM1ANH2_FTM.zip (1.2 KB, 164 views)
G901F_pit_G901FORL1ANH1_ORL.zip (1.2 KB, 146 views)
G901F_pit_G901FVFG1ANI1_VD2.zip (1.2 KB, 210 views)

CosminGCole said:
Yes my phone is G901F .. does that 1 make a difference ? got it from UK - EE
Click to expand...
Click to collapse
Just tried the PIT you have me , same thing. Failed after 1 second.

CosminGCole said:
Just tried the PIT you have me , same thing. Failed after 1 second.
Click to expand...
Click to collapse
Read my edit above - everything needs to be for the G901F
ROM and PIT - if you're trying to flash a G900F ROM, that's probably why it was failing in the first place

*Detection* said:
Read my edit above - everything needs to be for the G901F
ROM and PIT - if you're trying to flash a G900F ROM, that's probably why it was failing in the first place
Click to expand...
Click to collapse
Well now i feel a bit stupid xD . I will try those right away.

We all have to learn from somewhere

Download mode bug

Hello,
My LG G3 (D855 16go) is hard bricked.
I have the qualcomm 9008 Usb connection and I have flashed correctly, following the topic (http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359)
When I flash sbl1 at the end, I try to get in download mode .
I see the screen download mode during 2 sec, and then black screen and I get back the qualcomm 9008 USB connection.
I have tried many times to flash (V10 tot or V20), but I don't know what to do.
Could someone give me a solution, please?
PS: I have tried LGUP ,but I have model unkown and i cannot select
PS2:With flashtool, I put the port 41 and when I want to flash i got the Download FAIL!!, Model Information Check Fail (with PID:NULL,IMEI:NULL,Model(nothing),DLL : D855
PS3:with Flashtool 2014,I get stuck at 4%(Upgrading S/W)
I have spent some many hours reading topics in xda or googling but I am stuck. So please help if you have an idea
Thanks,

bonilla said:
Hello,
PS: I have tried LGUP ,but I have model unkown and i cannot select
PS3:with Flashtool 2014,I get stuck at 4%(Upgrading S/W)
I have spent some many hours reading topics in xda or googling but I am stuck. So please help if you have an idea
Thanks,
Click to expand...
Click to collapse
PS : Try with unplug and plug again USB cable.
PS3 : change DIAG with CS Emergency (do with your own risk) if you are give up.
PS2 : never tried.

I used to have a LG P970, and i unbricked it with LG flash tool. it also get stuck at 4%, as long as it keeps printing out log. after that, the phone is unbricked.
dunno it works with lg g3. hope this help.

Never_Sm1le said:
I used to have a LG P970, and i unbricked it with LG flash tool. it also get stuck at 4%, as long as it keeps printing out log. after that, the phone is unbricked.
dunno it works with lg g3. hope this help.
Click to expand...
Click to collapse
I got this message and i don't have more logs :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
fOxunO said:
PS : Try with unplug and plug again USB cable.
PS3 : change DIAG with CS Emergency (do with your own risk) if you are give up.
PS2 : never tried.
Click to expand...
Click to collapse
I tried the PS3 (change with CS Emergency) and it is the same, stuck at 4% with the same screenshot than above.
When I try to power on , I have the DemiGod Crash Handler , and when I press bottom up to go to download mode, I have the message on my phone :'Volume up is pressed Jump to dload Mode' and in some cases I have a blue led or sometimes i got a green led.
When I press volume down, it reboots and i got the same...

bonilla said:
I got this message and i don't have more logs :
Click to expand...
Click to collapse
You got this after click connection to server failed ?
Don't click the pop up , slid it to see what happened.
ops, you got 'Volume up is pressed Jump to dload Mode' , do you got DL mode before flashed ?

fOxunO said:
You got this after click connection to server failed ?
Don't click the pop up , slid it to see what happened.
ops, you got 'Volume up is pressed Jump to dload Mode' , do you got DL mode before flashed ?
Click to expand...
Click to collapse
When i power on , I got the Demigod Crash Handler
I press up to go to Dload Mode.
Then, I launch FlashTool 2014, I select the kdz and everything and then, it goes to 4%
and without pressing, I have this screen poping :
and even if I touch nothing, it doesnt change anything (In my phone , I have the demigod on the screen)
For information, I got this USB connection

Other question:
When I reflash with boardiag , each time when i finish with sbl1, i poweroff /poweron (botom up pressed) and I cannot access download mode, it goes black and I have the qualcomm 9008 usb port.
Could someone helps me with that problem ?
Thanks

Tmobile samsung galaxy s7 upload mode

My tmobile galaxy s7 got stuck on something like bbl error and in the center of the screen the android logo and the sbl error and upload mode nothing else not able to get on download mode or recovery mode totally stuck need help odin not able to flash anything none of the latest firmware nothing,..
Ehat i did was i flash with odin a verizon firmware or something like fof6 combo firmware with the latest tmobile firmware found on androidfilehost.
My phone is now bricked or what i call softbricked i need any kind of help on how to flash or a tool to forcely flash something to unbrick and be able to restore stock firmware any nice developer please help i still paying this s7 and i really want to revive my phone any help will be greatly appreciated?

I'm no expert by any means, just a dude that was in the same position a few weeks ago.
First you'll want to get ODIN, which is your flashing tool:
http://forum.xda-developers.com/attachment.php?attachmentid=3804544&d=1467772303
Next you need to find the stock firmware. Lots of sites will have it but 99% of them use some kind of bandwidth throttling crap. The firmware is 4.5gb uncompressed and about 2gb compressed. So if you can find someone hosting the firmware on their Google Drive that's your fastest bet, otherwise it'll take hours or days to download.
The latest firmware at the time of this post is G935TUVU4APIA. You don't necessarily need the latest, you just need to get your phone restored. If there is newer firmware available than what you flash to your phone, when your phone successfully boots you'll get an update to the latest.
Wish I could find a direct link for you but it seems these will always be moving around. That being said search for TMB-G935TUVU4APIA-20160927113301.zip. That was the file I downloaded and it contained the 5 files listed below, which you should extract to your preferred location on your PC:
AP_G935TUVU3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5
BL_G935TUVU3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5
CP_G935TUVU3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5
CSC_TMB_G935TTMB3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5
HOME_CSC_TMB_G935TTMB3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5 (optional)
The first 4 of the 5 listed above are the important ones. The 5th file, "HOME_CSC...", from what I understand preserves your data should you need to flash over a working phone, but we'll ignore that file for this task. Note the "AP", "BL", "CP", etc., at the beginning of each filename - more on that shortly.
Finally, the home stretch.
* Power off your phone completely. If you're boot looping hold VOL DOWN and POWER.
* Boot into recovery mode by pressing and holding VOL DOWN, HOME and POWER at the same time. Release when you see recovery mode warning.
* Connect your phone to your PC.
* Open ODIN and make sure the phone is recognized. It will show up under ID:COM and have some assigned COM port like 9 or 10.
* Click on the BL button and select the BL_G935TUVU3APG1_CL8439036_QB10213096_REV02_user_low_ship_MULTI_CERT.tar.md5 file from your extracted firmware package.
* Repeat this process for AP, CP, and CSC files.
* Once all files are selected click START.
After some time your phone will be flashed with the stock firmware and everything should be back to the way it was when you purchased it. Hope that helps!
---------- Post added at 11:26 PM ---------- Previous post was at 11:20 PM ----------
Sorry man, I can't read! Missed the part where you said you already tried ODIN.
You may want to do a factory reset first before flashing. I think you hold VOL UP, HOME and POWER to get there. Follow the steps to do a factory reset. Then try ODIN again with stock T-Mobile firmware.

tmobile s7 upload mode
the problem here is when I press vol up or vol down it goes straight to this
sbl error upload mode
and Odin detects as download mode but cant not flash anything I do have the latest firmware.
I will attach the picture of the actual error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

https://imageshack.com/i/pnI8ZKLZj

tmobile s7 upload mode
this was the file I flashed before this happens
found it on android filehost under the search of G930T
https://www.androidfilehost.com/?fid=529152257862666887
it may give some directions thanks

Sorry my friend, wish I could help here. It looks like your bootloader is jacked. Did you mean "sbl" instead "bbl" error? I think that's the secondary bootloader. And from the file you linked it appears you flashed the Galaxy S7 "flat" (G930T) firmware onto your Galaxy S7 Edge (G935T). Never thought that would be a brickable operation but apparently so. Unless someone's dealt with this before your only option may be to return the phone and see if they can either reflash it with some other proprietary tool or exchange it. I don't know how to push the stock boot.bin and sbl.bin onto these phones but maybe someone here does.

tmobile s7 upload mode
yes sir is a flat version of the s7
and what you are saying is correct.
well I will sit and wait for something to come up wit a light thanks...

well I think I fried thos device just gonna sit and wait for a developer to find some source of code to reboot this thing

does anyone knows how to fix this problem " SBL error upload mode " ? please........... thanks