Good evening, guys,
I'm at a loss as to what is happening with my A2017G.
I had TWRP 3.1.0-2, B04 and SuperSU, but the SU wasn't working properly (the message that root privileges were given to my root apps kept popping up but the actual apps didn't work as intended, so to flash the alternative file that I found somewhere in the forums here.
After that, I could not pass the ZTE logo in order to boot the system.
Went back to TWRP, flashed bootstack and stock system by tron again, SuperSU - and the same result.
Without knowing what else to do, I grabbed the full stock B04 file and tried to flash it.
Now, I have a phone whith stock recovery working, without fastboot, with FTM mode, with EDL mode all working, but I can't seem to use one of those in order to restore my phone that, when I try to boot to system, keeps stuck at the screen with the message that the bootloader has been unlocked.
I tried flashing twrp and the update.zip through Mi Flash, but I get a syntax error (my device shows as COM3);
In recovery, when I choose to apply upgrade through SD, a message appears "You can't upgrade from SD card, sorry";
FTM mode works and my phone loads as an adb device (seeing in Axon 7 tool), but if I try to sideload the update.zip through the Windows 10 cmd it crashes with a message saying "bad alloc", or something.
So, I'm at a loss here. I have every modes working, and I still cannot flash anything to my device?
Or am I doing it wrong?
Thank you.
I'm almost sure you can't just flash an official update zip with MiFlash, so do this:
Download this zip, comes from djkuz. It is the full A2017G system with fbop and fastboot
https://mega.nz/#!ZhwR1BAD!PuIWa5Viv...iR-j1U8wZZidTw
After that unpack it and use MiFlash to get it flashed nicely on your device. When you finish, you'll have B10 I think. I experienced random reboots without any thermal problems (even rebooted while it was in my pocket) so you might be better off going to RR but be real careful if/when going back to stock if you decide to do this (i had a DFU brick )
Choose an username... said:
I'm almost sure you can't just flash an official update zip with MiFlash, so do this:
Download this zip, comes from djkuz. It is the full A2017G system with fbop and fastboot
https://mega.nz/#!ZhwR1BAD!PuIWa5Viv...iR-j1U8wZZidTw
After that unpack it and use MiFlash to get it flashed nicely on your device. When you finish, you'll have B10 I think. I experienced random reboots without any thermal problems (even rebooted while it was in my pocket) so you might be better off going to RR but be real careful if/when going back to stock if you decide to do this (i had a DFU brick )
Click to expand...
Click to collapse
Flashing the extracted B10 package solved it, thanks!
Until now, everything's smooth, running B04.
Thank you.
Hi All,
I flashed oreo to my Mate 9 today, all was well until I tried to root.
Now it won't boot, stuck in bootloop. I can get to Fastboot and TWRP Recovery.
Tried to reflash, but now no bootloop - just got fastboot and TWRP.
When in TWRP device is not showing up in ADB devices, so can't push anything.
Any ideas as to how to come back from this?
Thanks.
Things are worse now... it won't reboot to recovery. Can still get fastboot though.
When reboot to recovery it just sits on "your device is booting now..." and doesn't seem to progress. I have re-flashed TWRP via fastboot... but still the same.
Wallace44 said:
Hi All,
I flashed oreo to my Mate 9 today, all was well until I tried to root.
Now it won't boot, stuck in bootloop. I can get to Fastboot and TWRP Recovery.
Tried to reflash, but now no bootloop - just got fastboot and TWRP.
When in TWRP device is not showing up in ADB devices, so can't push anything.
Any ideas as to how to come back from this?
Thanks.
Click to expand...
Click to collapse
Device shows phone and FRP as unlocked.
I have extracted the oreo update using a Perl script i found on another thread. Flashing system, kernel, recovery_ramdisk has made no difference.
Anyone able to help please?
What root did u use magisk or su?
Why don't you use this method?
Its safe and no more side effects.
Then after you can root with magisk.
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Thanks
[email protected]@n
Mate-10
So here is what happened. I decided to take a crack at twrp and rooting my essential phone. its fully updated to aprils patch
unlocked my bootloader. HOWEVER i never used the command fastboot flashing unlock_critical. how ever it still said my boot loaders unlocked.
installed twrp no issue (other then touch but i figured that out) installed elementalx kernal. made a backup in twrp just in case.
booted into android fine no problems. found out my wifi does not work. ok now im just giving up. found out flashing the boot img will fix it. well i flashed it via twrp and when it asked where i said to the boot.
now my phone boot loops. i cant get into twrp. only a default recovery mode for android. i can get into the boot loader but im scared because ADB cant find my device anymore. trying to wipe deivce makes it reboot and boot loop again.
am i screwed? i dont care about the data but its 3am and i think i really messed up my phone
xhakz said:
So here is what happened. I decided to take a crack at twrp and rooting my essential phone. its fully updated to aprils patch
unlocked my bootloader. HOWEVER i never used the command fastboot flashing unlock_critical. how ever it still said my boot loaders unlocked.
installed twrp no issue (other then touch but i figured that out) installed elementalx kernal. made a backup in twrp just in case.
booted into android fine no problems. found out my wifi does not work. ok now im just giving up. found out flashing the boot img will fix it. well i flashed it via twrp and when it asked where i said to the boot.
now my phone boot loops. i cant get into twrp. only a default recovery mode for android. i can get into the boot loader but im scared because ADB cant find my device anymore. trying to wipe deivce makes it reboot and boot loop again.
am i screwed? i dont care about the data but its 3am and i think i really messed up my phone
Click to expand...
Click to collapse
Are you still bootloader unlocked?? Can flash files via fastboot? If you can run the command "fastboot flashing unlock_critical" and then flash bts from this thread https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
Tech_Savvy said:
Are you still bootloader unlocked?? Can flash files via fastboot? If you can run the command "fastboot flashing unlock_critical" and then flash bts from this thread https://forum.xda-developers.com/essential-phone/development/stock-7-1-1-nmj20d-t3701681
Click to expand...
Click to collapse
hey hope all is well im sorry for the late reply. i was able to figure everything out i flash the wrong boot.img and twrp its not perm on my device. I saw a threat that lets you go back to stock and has aprils build. thanks for your help tho!!!!!
Hello ALL!
I normally don't message much because usually I can find most of my problems can be fixed by searching threads online. However, this particular case for me has been exhausting because through trial and error I have been unsuccessful in getting my 6T to boot into any rom normally.
I went from a stock T-Mobile to International version to LOS. The reason I did what I did was because I could get a IMEI or SIM to register on LOS. That worked fine on OOS 9.0.11. but as soon a I flash the latest LOS, no sim, bootloader, or IMEI detection.
I was rooted and unlocked. Now I am neither.
While on LOS, someone on another forum suggested to erase the persist partition and reflash to get the sim imei back so the phone would get service, when the phone rebooted it still didn't work and then the second time it rebooted it always gets stuck on the boot screen and never boots into the OS.
I tried to repair and reflash but was unsuccessful.
Since doing all of that, Ive reflashed using msm tool and although that was successful for OOS 9.0.11 and T-Mobile stock rom. It gets stuck on the boot screens for both.
I flashed LOS on A & B so I don't have a stock recovery.
I can't ADB anymore. I can only seem to connect via FASTBOOT but cannot seem to flash anything because the BOOTLOADER is now LOCKED.
How can I get this phone back to its original state? What ever the persist partition is. Removing it had made the phone non-bootable.
What can I do to fix? I greatly appreciate any help to get the phone operational again.
Thank you all!
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
- Go to the thread linked above and download the latest OOS (.13) stable.
- Download latest Magisk.
- Have the latest TWRP .img downloaded and on-hand, you will use a few times as well as the installer .zip.
- Be sure to have adb/fastboot installed.
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
- Put your phone into fastboot mode (reboot to bootloader).
- Go to the folder you downloaded in the first step and run the "flash all.bat".
- Ignore errors. If it's get stuck for more than 45 seconds, just hit enter to keep it going.
- OOS will boot. Go to settings, enable developer setting, enable advanced reboot and reboot bootloader again.
- Use "fastboot boot 'twrp-file-name'.img" to boot into TWRP.
- In TWRP, go to Reboot and changed the boot partition to the one NOT CURRENTLY enabled. In other words, switch boot partitions.
- Reboot bootloader.
- Go to the folder you downloaded in the first step and run the "flash all.bat" again.
- OOS will boot. Go to settings, enable developer setting, enable advanced reboot and reboot bootloader again.
- Use "fastboot boot 'twrp-file-name'.img" to boot into TWRP again.
- Move Magisk installer and TWRP installer from steps two and three onto the internal memory of your device.
- Flash TWRP, reboot recovery to make sure it sticks.
- Flash Magisk for root.
- Wipe dalvik and reboot system.
You will have the latest stable OOS on both partitions at this point! I literally just did this yesterday. Good luck!
..Cory.. said:
https://forum.xda-developers.com/oneplus-6t/how-to/rom-stock-fastboot-roms-oneplus-6t-t3862516
- Go to the thread linked above and download the latest OOS (.13) stable.
- Download latest Magisk.
- Have the latest TWRP .img downloaded and on-hand, you will use a few times as well as the installer .zip.
- Be sure to have adb/fastboot installed.
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
***BACK UP DATA, YOUR PHONE WILL BE WIPED. INTERNAL SD AS WELL***
- Put your phone into fastboot mode (reboot to bootloader).
- Go to the folder you downloaded in the first step and run the "flash all.bat".
- Ignore errors. If it's get stuck for more than 45 seconds, just hit enter to keep it going.
- OOS will boot. Go to settings, enable developer setting, enable advanced reboot and reboot bootloader again.
- Use "fastboot boot 'twrp-file-name'.img" to boot into TWRP.
- In TWRP, go to Reboot and changed the boot partition to the one NOT CURRENTLY enabled. In other words, switch boot partitions.
- Reboot bootloader.
- Go to the folder you downloaded in the first step and run the "flash all.bat" again.
- OOS will boot. Go to settings, enable developer setting, enable advanced reboot and reboot bootloader again.
- Use "fastboot boot 'twrp-file-name'.img" to boot into TWRP again.
- Move Magisk installer and TWRP installer from steps two and three onto the internal memory of your device.
- Flash TWRP, reboot recovery to make sure it sticks.
- Flash Magisk for root.
- Wipe dalvik and reboot system.
You will have the latest stable OOS on both partitions at this point! I literally just did this yesterday. Good luck!
Click to expand...
Click to collapse
Thank you but how can I flash if my bootloader is locked? Everything I try fails.
I guess the real question is: How can I get the phone to turn on OEM UNLOCK so I can fastboot unlock the Bootloader if it wont boot up the OS?
Is there a way to fix it via the msmdownload tool? Custom file maybe? I've tried the files 9.0.11 & 12 OOS files and all I get is the boot screen white ball logo circling the red ball - stuck in loop and same with stock t-mobile rom.
My friend, sounds like you need to restore your EFS partitions
... I'm trying to figure out how the hell you successfully flashed MSM tool in EDL mode and not have ALL your partitions restored. That tool is supposed to literally write the phone as it came out of the box. Also I think there are different MSM tools for each device respectively, you did use the T-Mobile one right?
Causical said:
My friend, sounds like you need to restore your EFS partitions
... I'm trying to figure out how the hell you successfully flashed MSM tool in EDL mode and not have ALL your partitions restored. That tool is supposed to literally write the phone as it came out of the box. Also I think there are different MSM tools for each device respectively, you did use the T-Mobile one right?
Click to expand...
Click to collapse
My thoughts exactly. So, when it was on LOS I erased the persist partition and that really messed things up. So yes, how can I restore the partition back with a locked bootloader? Every time I've used MSM tool it fixes everything. This time no such luck. I flashed 9.0.11 & 12 and then I did the T-Mobile version. All only boot to the boot screen and hang. In doing so, I wasn't thinking if that failed and it locks the bootloader, then what? I saw an old video somewhere on a oneplus 2 or 3 where the person used the msm tool 3.0 and fixed a bricked locked bootloader phone. Similar to the fastboot method of reformatting. In the msm tool folder he had all the image files for all the partitions not sure if that the same thing as msm tool 4.0 with just one ops image file?
Anyway, is there a way to unlock the bootloader without booting into the OS? Or a way to restore the partitions via msm tool?
defcondoc said:
My thoughts exactly. So, when it was on LOS I erased the persist partition and that really messed things up. So yes, how can I restore the partition back with a locked bootloader? Every time I've used MSM tool it fixes everything. This time no such luck. I flashed 9.0.11 & 12 and then I did the T-Mobile version. All only boot to the boot screen and hang. In doing so, I wasn't thinking if that failed and it locks the bootloader, then what? I saw an old video somewhere on a oneplus 2 or 3 where the person used the msm tool 3.0 and fixed a bricked locked bootloader phone. Similar to the fastboot method of reformatting. In the msm tool folder he had all the image files for all the partitions not sure if that the same thing as msm tool 4.0 with just one ops image file?
Anyway, is there a way to unlock the bootloader without booting into the OS? Or a way to restore the partitions via msm tool?
Click to expand...
Click to collapse
Try this and tell me if it works.
Have you tried this dudes stuff? https://forum.xda-developers.com/oneplus-6t/how-to/op6t-collection-unbrick-tools-t3914746
... Not even sure what it is really, just says collection of unbrick tools.
_Masked_ said:
Try this and tell me if it works.
Click to expand...
Click to collapse
Yes, I did try that. That is what I just flashed with the msm tool. Gets stuck on the OOS boot animation.
Causical said:
Have you tried this dudes stuff? https://forum.xda-developers.com/oneplus-6t/how-to/op6t-collection-unbrick-tools-t3914746
... Not even sure what it is really, just says collection of unbrick tools.
Click to expand...
Click to collapse
Looks like the MSM tool. I'm going to give 9.0.13 a try but I'm thinking I may have the same problem.
Causical said:
Have you tried this dudes stuff? https://forum.xda-developers.com/oneplus-6t/how-to/op6t-collection-unbrick-tools-t3914746
... Not even sure what it is really, just says collection of unbrick tools.
Click to expand...
Click to collapse
Tried 9.0.13. Still gets stuck on OOS boot animation screen. There's got to be something to flash to fix this.
So you're booting EDL mode then flashing the MSM tool that exactly matches the way your phone came stock? At this point I would discontinue trying to convert it to international or upgrade the OS to a more recent version or any of that. I would focus on strictly flashing it to exactly the way you bought it.
Causical said:
So you're booting EDL mode then flashing the MSM tool that exactly matches the way your phone came stock? At this point I would discontinue trying to convert it to international or upgrade the OS to a more recent version or any of that. I would focus on strictly flashing it to exactly the way you bought it.
Click to expand...
Click to collapse
Yes. I did flash the stock T-Mobile ROM via the MSM tool. Freezes at the pink T-Mobile boot screen. Pretty sure the partitions need to be fixed but I thought the MSM tool would do that? I guess not. Is there a more advanced MSM tool where I can see what's being partitioned or is the MSM tool not doing any partitioning and that's why the phone is having the boot problem?
defcondoc said:
Yes. I did flash the stock T-Mobile ROM via the MSM tool. Freezes at the pink T-Mobile boot screen. Pretty sure the partitions need to be fixed but I thought the MSM tool would do that? I guess not. Is there a more advanced MSM tool where I can see what's being partitioned or is the MSM tool not doing any partitioning and that's why the phone is having the boot problem?
Click to expand...
Click to collapse
I know this is a stupid question but have you tried a factory reset in recovery mode? I know its a stupid question but I did not see it asked or noted.
Scott said:
I know this is a stupid question but have you tried a factory reset in recovery mode? I know its a stupid question but I did not see it asked or noted.
Click to expand...
Click to collapse
No stupid questions and I don't mind repeating answers to questions. I have tried that, but it does nothing. I get wipe cache or reboot to fastboot or reboot to recovery. When I choose system wipe, it takes 1 second to finish. It reboots and it gets stuck on the boot screen. Ever since persist partition was deleted it just freezes on startup and now that the bootloader is locked I cant seem to get anything to work. MSM tool I thought was supposed to fix this sort of thing but it has failed. Someone must know a way to get back into the OS so I can turn on OEM Unlock.
How do you know your bootloader is locked?
Causical said:
How do you know your bootloader is locked?
Click to expand...
Click to collapse
Fastboot says bootloader is locked. Shows it on the fastboot screen. Wont let me transfer any files from pc to phone. I can start the transfer process but it fails.
defcondoc said:
Fastboot says bootloader is locked. Shows it on the fastboot screen. Wont let me transfer any files from pc to phone. I can start the transfer process but it fails.
Click to expand...
Click to collapse
So you're able to enter EDL mode with a locked bootloader? How do you know your computer is seeing your device in EDL mode?
I'm going to place this here for myself for now. I'm just trying to understand your situation a little better, but this is just for later.... maybe, depending on your answer. https://forum.xda-developers.com/an...how-to-reboot-to-edl-fastboot-t3394292/page12
ALSO; If you don't mind can you link the thread that contains the original discussion where your problem began?
Causical said:
So you're able to enter EDL mode with a locked bootloader? How do you know your computer is seeing your device in EDL mode?
I'm going to place this here for myself for now. I'm just trying to understand your situation a little better, but this is just for later.... maybe, depending on your answer. https://forum.xda-developers.com/an...how-to-reboot-to-edl-fastboot-t3394292/page12
ALSO; If you don't mind can you link the thread that contains the original discussion where your problem began?
Click to expand...
Click to collapse
The point of EDL is to get around any restrictions or issues with the device, so yes, you can boot to EDL while locked. Your link will not help much because he can already get to EDL. Not to mention he will have no ADB access. Whatever he does, he has to fix it in EDL.
OP: Are you up and running yet? I am willing to try copying out my partition and sending to you.
Let me know...
---------- Post added at 08:12 PM ---------- Previous post was at 08:08 PM ----------
Wait, I just realized that my persist.img would not work because he has no way to flash it.
Nevermind.
*Details on situation provided first. Skip to last paragraph for question.*
I'm starting to get back into the Android game after being away for some time and successfully rooted my 8 Pro on Android 10. About a week later, I got the notification to upgrade to Android 11 and found there was a way to upgrade while retaining root. Awesome!
While walking through the process, I missed a step and only used Magisk Manager to install to the "inactive slot". When the rest of the process finished and I was up on Android 11, I couldn't get root; it would only say N/A. I worked on it for a while and, eventually, managed to somehow fully brick my phone to the point it would only boot to Fastboot. Normal start ended in Qualcomm Crashdump Mode (QCM), booting to recovery would put me in Fastboot and if I tried to 'Fastboot boot recovery recovery.img' with the oem recovery extracted using Payload Dumper, it would also end up in QCM. I tried for a few hours to get into EDL Mode but never could get it to work. I would only ever end up in Fastboot or QCM.
I resigned to contacting OnePlus and started the process to have my phone sent in yesterday, but knew I had time to mess with it some more before getting the shipping labels and such. While working on it for a few hours last night and getting no where, I had a revelation. the 8 Pro has A/B Parititioning! Using Fastboot, I was able to switch my phone to Partition B and reboot. After 30 agonizing seconds, the boot screen finally showed and it eventually spit me out at the setup screen. Success!
Finally for my actual question. I know my Partition A is still borked, so I'm tempted to boot into EDL Mode (which I think I can finally do using ADB) and reflash everything but I'm curious. Will reflashing in EDL Mode on affect Partition B since that's what I'm currently on, or will it do both A and B? I'm okay with reflashing both and starting all the way over if necessary but if I can specifically only reflash Partition A , that would be preferable. I did a quick search but couldn't find any info on this.
Keeping this up and posting the answer as I've been able to determine it through additional research/trial and error.
From what I can tell, flashing via EDL Mode resets both slots and flashes the factory firmware back to Slot A. So even if you've wrecked it as bad as I did, you can change to Slot B via Fastboot, get booted into Android, use ADB to get into EDL and reflash with the MSM Tool.
PassingInTime said:
Using Fastboot, I was able to switch my phone to Partition B and reboot.
Click to expand...
Click to collapse
Hello!
How did you do it with locked bootloader. Please, write step by step instruction.
Sorry. You had unlocked bootloader...