Related
Hi All,
I am new here and this is my first post. But i have been reading this forum for quite sometime and know that u guys are now my final stone. I am a proud owner of a Motorola Defy. And I am having this strange behavior, which is effectively rendered the phone almost useless. The phone is acting like its got a restore point in itself, and every time i restart.. it gets back to that point in time.
This includes app installs, uninstalls, stuff placed in system through adb push, theme, everything in the OS. I tried installing a different ROm through clockworkmod, but its not taking effect. Its saying install success but as soon as it restarts, its going back to the old ROM. (takes time to load, so i guess it reinstall back/restored the old version)
Details of device : I am from India and the phone was manufactured in India in around April/May 2011. Its a red lens Defy and and came with Eclair. I updated it officially to the first Froyo release for SEA region. After that i rooted the phone with superone click, and installed WIUI rom. I have been updating the ROM with newer versions around each month. The last one was 1.11.18 though as i waiting for a good ICS version to flash.
The problem occurred after i started installing some gold apps from getJar. It restated in between and install... and that point is kind of acting like a restore point even now.
Things I did: Tried installing different rom by CWM method. Reinstalling second init and CM, both old and new version. Tried restoring nandroid backup of my official ROM. Tried fixed and full sbf flash through rsdlite 4.9.5.2 and now 5.6. First 3 things reset as soon as i restart. For RSDLite, it gives checksum error for each and every ROM i tried. I tried all SEA releases, JORDN_U3_97.21.51, Defy Plus Rom 2.3.6, 2.21 first eclair rom, everything gives the same error. From the RSDLite logs, i could see that there is something wrong as.. say the last successful CG was 33, and the error came for 34, the log says its expecting the checksum on the sbf to be equal to that of CG 33. Its taking the last successful checksum validation and expecting that for all the CGs henceforth. its not showing what the device actually has.
I atlast could somehow, but trial and error, removed all the CGs which were throwing error, and recompiled the sbf to make it pass the RSDLite flash. The CGs present in the ROM (JRDNEM_U3_3.4.3-36-1.7) were 32, 34, 42, 53, 61, 64, 65. And as soon as it booted, it restored back to the checkpoint. Even after i formatted by card and put it in, the app shortcuts remained on the home screen, but as the apps on the card were gone, they are just junk and doesnt open anything.
Thanks in advance. Please let me know what you need from me to help me resolve this issue.
Any help... Anyone?
Can someone please suggest something?
This is what i got from some people. I am not sure how far this is possible, but somehow the theme i installed just before this all happened, from MIUI market.. somehow managed to change something inside phone's kernel, past the locked bootloader? I am totally a noob in this and just a wild imagination?
Or may be some sort of cache wipe is happening everytime the phone boots up, So even when i install the ROM, when it boots up, it gets back the old ROM.. like what would probably happen if i do a factory reset soon after i instal a rom before the restart..?
I would really appreciate it if anyone could help me out with this...
Checksum errors were for me also.
I tried my office computer for flashing and instantly flash was done. The checksum error occurred 7 times on my good computer before that.
Reflashing froyo must take care of all errors happening
Thanks Kapil fr the response. Are you from india? Which sbf did u flash? And waht all did u install in the office pc? I have a pc of my friend where i can try to reflash if you tell me the exact steps that u took in the fresh pc.
Also, can anybody tell me how to use adb commands in CWM mode? Its recognizing my phone in normal mode but as soon as it boots in Moto recovery of CWM, its not recognizing anymore. Want to use adb format commands from recovery.
Hi I was able to use adb in CWM, but format commands were not working. How can i format the system partition? please help me with this.
Is there anyone here who know how to restore a nandroid backup manually using adb commands for MB525???!!!!!
Sounds weird and impossible. Try this. Wipe everything though cwm and flash new rom. Try ms2ginger.
Thanks darshanonline for the suggestion. I tried to wipe everything.. factory reset+cache+dalvik cache wipe. And then tried to install cyanogenmod 7.1 as well as 3 different wiui builds. Everytime it shows that the install was successful, ut as soon as i restart, it would go back to the old ROM.
Is there any checkpoint system in android, seeing the init.rc, i can see comments on something about saving a checkpoint. Is there any particular condition under which this checkpoint may be getting used on very restart?
Also.. is there any way for RSDLite to skip the chksum validations and get the install anyways?.. Some sort of a hack into it?
Ok.. Found something else thats happening. I dont need to shutdown for the system to revert back. Say i install a few things new after a reboot.. After some time.. 1 day at max, i am not able to open them, and neither am i able to open manage applications or market. Everything force closes. I have Ti Backup installed, and i opened it, and i didnt find the new apps to back up. I connected the device and checked through adb, and they were not present in the app folder. They just vanished... So basically after a certain point of tiime, the new stuff just gets deleted on its own.
Guys i know i may sound dumb and stupid with my questions, but i really couldnt find any solution on the net for this. Please tell me waht i should do, and i'll do it. But tell me something. Dont ignore please!
and you did wipe data from within stock recovery (vol down+power etc.), i presume..
Sent from my MB526 using Tapatalk
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Soumik84 said:
Yes i did that too.
wiped data and cache. Restarted to cwm and installed update.zip (renamed cm 7.1 stable) and by selecting zip from sd card. Same results. Installs successfully but reverts back as soon as i restart.
Click to expand...
Click to collapse
DL WIUI 1.12.16 ICS > copy to SD card > Boot in CWM > select zip to install > Install WIUI 1.12.16
Hopefully your problem should be solved.
I found 1.12.16 ICS with lesser FC than the 2.21
labsin said:
Same problem here:
http://forum.xda-developers.com/showthread.php?p=22617834
Click to expand...
Click to collapse
Thanks for the link. Now i know that i am not the only one having this issue. But even there its not resolved yet.
@ headers.chennai - Thanks. I will try that ROM, along with Pikachu ROM with Aroma installer, might be a different installer can try fix it?!
BTW.. does anyone have the TI OMAP board utility? Any chance that it can be available outsite here?
I tried the arora installer and it supposedly formatted the system partition and remade it.. but as soon as it finishes and i restart.. I get back the same ROM.
Is it some way that the files are not getting deleted, like some hardware lock or fault?
Soumik84 said:
I tried the arora installer and it supposedly formatted the system partition and remade it...
Click to expand...
Click to collapse
Hi, bro! What is "arora"? I should try it asap, and all other chance.
My trouble here, same as your.
Hey man.. looks like we are having same problem...
Sorry abt the typo... its Aroma Installer. Its with the Pikachu ROM in this link :
http://forum.xda-developers.com/showthread.php?t=1498843
Its a new installer that launches from cwm when u try and install this ROM. u got some options to select and on selecting the complete install option,, the log shows that it formats the system partition and then creates it. I saved the log file, but for some reason the file shows up blank now. Might be problem with the launcher.. or my phone.. dont know.
Soumik84 said:
Its a new installer that launches from cwm...
Click to expand...
Click to collapse
Not for me, my checkpoint without cwm
Hey Guys,
Nexus S the phone which I love the most and I do own this one from a long time.
Please read the whole thing don't ignore as it's toooo big.
Straight away to my issue. Thing is I've unlocked boot loader, rooted and I was using CM9 MOD. Everything was going fine. And i saw Cyber GR-MOD with more customization in the forums, I also flashed Cyber GR-MOD. Every thing was again fine with the Cyber GR, but I was facing few bugs in it. I was often wiping the data/doing factory reset. I was bored with Cyber GR. Then I saw ROM MIUI based on CM9 build with IMM76D. I was really attracted by UI of the MIUI ROM. I decided the flash that ROM. Before finding the MIUI ROM I was facing some problem with the Recovery. I was often getting error E:\ can't mount SD Card and the phone doesn't boot up. I did solve it by locking and unlocking the bootloader. Even after doing that I was facing that issue. Some how i managed to get into the recovery and flashed the MIUI Rom. After flashing i rebooted the device and the thing is i ain't get MIUI boot logo. I was getting CM9 Boot logo and the phone boots up with the Setup wizard sometime along with that i get pop ups for all the apps in the system getting forced closed or it won't boot up, it just keep loading with the CM9 logo. And am not able to use any of the ROM. Again now am stuck in that f***king [don't mind this ] E:\ Can't mount SD Card and when i tried to lock and unlock my bootloader, It did get locked successfully but when I tried to unlock it. It freezes in the Unlock bootloader menu. And am not even able to restore the phone or install a custom ROM coz of the error which i mentioned above. What eva ROM I install the only things it always boots up with CM9.
Please give me a permanent solution for that E:\ Can't mount SD card and to get my handset back with a new MIUI ROM
Please help me out guys. My dad will screw me up if he comes to know that my phone is bricked. LOL!! but this is the fact
U can force ur phone into recovery using cmd in windows.search in google how to do it.
I forget the command
After get into cwm u can wipe data.cache.dalvik and try flash stock rom.
Good luck
This made me lol.
I've seen a link with a probable fix for it but I'm on my phone and can't find it.
Sent from my Nexus S 4G using xda premium
You can try this.
You should try this post:
http://forum.xda-developers.com/showthread.php?t=1447040
There's a guide for unbricking nexus s.
Good luck
akabadnews said:
You can try this.
Click to expand...
Click to collapse
Yeah, give this a try. Nowadays, even if you aren't on a linux OS, you can set that up in maybe less than 30 minutes.
All the best, hope you can de-brick your phone.
I'll try and post the report.
How did it go?
own3dpl0x said:
I'll try and post the report.
Click to expand...
Click to collapse
How did it go? I'm curious, because I'm presently on CM9 nightlies (which is already 4.0.4 based), but am thinking of flashing the stock ICS 4.0.4 just for a look at it. But... don't want to brick out.
Please help!!
Followed all the steps.
But while resurrecting the device am getting error as SBL Injection Failure.
I don't know what to do.
Hey guys,
this is my first post and my problem is as follows:
I had ICS 4.0.x on my galaxy tab 10,1 P7500, I then installed CWM 5.5.0.4. but had a rolling window. I then continued to install a bootloader (here: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41) with the appropriate bootloader for the p4. This fixed the rolling recovery and allowed me to install CM10 using CWM.
But my current problem is when the device goes on sleep mode and I wake the device up the screen is scrambled, can anyone tell me how to fix this?
Thank you in advance
The only fix i found is for HC
http://forum.xda-developers.com/showthread.php?t=1680738
Edit:
I fixed the rolling screen issue after screen unlock with pershoot's help, thanks again pershoot!
Maybe it will also work for you , here we go:
If you have installed the latest cm10 build, there is only one issue for the p4wifi , you must be on the US ICS Bootloader .
So download the recovery.tar.md5 from here:
http://droidbasement.com/galaxy/roms/cm10/p4wifi/recovery.tar.md5
Than go into download mode and flash this recovery using ODIN, (select pda and look for this file where you safed it, than click start)
Than, download the right US ICS Bootloader here:
http://droidbasement.com/galaxy/roms/cm10/p4wifi/US_LPL_4.0.4_bootloader.zip
Flash this also via ODIN in the PDA section, this may take a little longer, don't panic...
After that, the tablet will reboot and it should work... don't blame me if it didn't, but i had this rolling screen on almost every rom, and everything is fixed now...
I wish you good luck because i know it IS very annoying..
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
DefQoN_BE said:
I have EXACT the same issue, i'm running the latest cm10 build from droidbasement.com, if anyone can please help us???
The only fix i found is for HC
http://forum.xda-developers.com/showthread.php?t=1680738
I wish you good luck because i know it IS very annoying..
Click to expand...
Click to collapse
I have tried this method and works perfectly!
Thank you sooo much!!!
I am afraid to put a rom on my 10.1, i love it though!
blacks10 said:
I am afraid to put a rom on my 10.1, i love it though!
Click to expand...
Click to collapse
There's nothing you should be afraid of there is a fix for everything, and if you can't find it? There are nice poeple out there who wants to solve your problrm on xda developers forum
@drefcom: you're welcome
Please help - When turning off the Screen Android 4.1.1 will not come back on
I have the following problem.
When I install one of the latest rom e.g.
[ROM] [JB] [P4--P4WIFI--P4VZW]
4.1.2 AOKP for the Galaxy Tab 10.1
or
[ROM][JB][CM10] Android 4.1.1 - CyanogenMod 10 Preview
then I have this problem:
When I turn off with the "Power"-Hardbutton, then it turns off, but it does not turn back on. The screen stays black.
With the Rom ...
[ROM][JB][CM10] Android 4.1.1 - CyanogenMod 10 Preview "cm-10-20120814-EXPERIMENTAL-p4.zip" from August everything works fine.
Since I had this flickering problem I flashed the bootloader before I installed all these Roms.
But one works and all new ones don't.
Anyone has a idea what to do?
thx
drefcom said:
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
I have tried this method and works perfectly!
Thank you sooo much!!!
Click to expand...
Click to collapse
:good:
Thanks this helped me fix a mates Galaxy Tab 10.1
I was starting to pull my hair out and this worked so well.
Takes no time to do and no need to reflash the rom.
Hi guys.
speersie said:
:good:
Thanks this helped me fix a mates Galaxy Tab 10.1
I was starting to pull my hair out and this worked so well.
Takes no time to do and no need to reflash the rom.
Click to expand...
Click to collapse
i tried this method, but at second flashing (bootloader.zip) i get "0 succeed/0 failed" and still i get that scramble, and have to reboot all the time.
Any ideas?
Thanks in advance.
Cheers!:good:
Problems solved
I solved my problems. I installed the "custom" bootloader for each Rom and the "black screen" problem is now gone.
Thanx anyway.
drefcom said:
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
I have tried this method and works perfectly!
Thank you sooo much!!!
Click to expand...
Click to collapse
I have tested the fix for weeks now and it worked great.
Except, this afternoon my tablet randomly restarted and now won't go past CM 10 boot screen.
Any idea whether reflashing the ROM without wyping, purely just installing (as is) CM10 M2 from CWM? Or any other ideas?
I have tried clearing the cache and the dalvik cache. I then tried doing a factory reset but it doesn't seem to proress. I thought if I can do a factory reset then reinstall the ROM I might get it to work but I can't install the ROM as it says "Error (Status 7)?
I have tried formatting the /data in attempt to get the factory reset to work but this also freezes.
Currently, my tablet is in an infinite loop cycle and I cannot change the ROM or do a factory reset.
Thanks, you guys have really been helpful!
drefcom said:
I have tested the fix for weeks now and it worked great.
Except, this afternoon my tablet randomly restarted and now won't go past CM 10 boot screen.
Any idea whether reflashing the ROM without wyping, purely just installing (as is) CM10 M2 from CWM? Or any other ideas?
I have tried clearing the cache and the dalvik cache. I then tried doing a factory reset but it doesn't seem to proress. I thought if I can do a factory reset then reinstall the ROM I might get it to work but I can't install the ROM as it says "Error (Status 7)?
I have tried formatting the /data in attempt to get the factory reset to work but this also freezes.
Currently, my tablet is in an infinite loop cycle and I cannot change the ROM or do a factory reset.
Thanks, you guys have really been helpful!
Click to expand...
Click to collapse
After hours of trying I have found a solution.
I previously had done backups. I tried each one until one started restoring. It completed quite a lot till it froze and I restarted into recovery.
I did a cache wipe and dalvik cache wipe and could then complete a factory reset.
It has now booted completely into ICS where I can now flash CM10 again.
The tablet works normally as you would expect on ICS. I booted into recovery and tried to flash CM10 M2 for the GT-P7500 but I still get a error, status 7.
Anyone experienced this?
drefcom said:
After hours of trying I have found a solution.
I previously had done backups. I tried each one until one started restoring. It completed quite a lot till it froze and I restarted into recovery.
I did a cache wipe and dalvik cache wipe and could then complete a factory reset.
It has now booted completely into ICS where I can now flash CM10 again.
The tablet works normally as you would expect on ICS. I booted into recovery and tried to flash CM10 M2 for the GT-P7500 but I still get a error, status 7.
Anyone experienced this?
Click to expand...
Click to collapse
Status 7 usually indicates the wrong update file, are you sure you are flashing the right ROM for the 7500?
Perhaps try to flash the recovery and bootloader first and then the right ROM and see what happens?
DefQoN_BE said:
Status 7 usually indicates the wrong update file, are you sure you are flashing the right ROM for the 7500?
Perhaps try to flash the recovery and bootloader first and then the right ROM and see what happens?
Click to expand...
Click to collapse
The thing is it is the exact same file I used to flash the previous time.. I first updated my recovery and bootloader before flashing and still get the error. Thanx for the thought though.
Hello Guys!
I have received the GT-S5360 from a friend, with SIM-Lock.
I hoped to remove the Simlock with https://forum.xda-developers.com/showthread.php?t=3200347, which worked.
The only Problem was, that Link2SD was not working.
So i hoped installing https://forum.xda-developers.com/showthread.php?t=3486109 would remoce it, but instead of removing any problems, the phone did not boot my ROM anymore, but i got a TWRP Recovery.
So currently, i have installed https://forum.xda-developers.com/galaxy-y/development/kernel-getux-kernel-v1-beta-2-t2907168 and nothing wants to work, no recovery and no ROM.
Only thing that works is Download Mode(
fabi012345678910 said:
Hello Guys!
I have received the GT-S5360 from a friend, with SIM-Lock.
I hoped to remove the Simlock with https://forum.xda-developers.com/showthread.php?t=3200347, which worked.
The only Problem was, that Link2SD was not working.
So i hoped installing https://forum.xda-developers.com/showthread.php?t=3486109 would remoce it, but instead of removing any problems, the phone did not boot my ROM anymore, but i got a TWRP Recovery.
So currently, i have installed https://forum.xda-developers.com/galaxy-y/development/kernel-getux-kernel-v1-beta-2-t2907168 and nothing wants to work, no recovery and no ROM.
Only thing that works is Download Mode(
Click to expand...
Click to collapse
Hi friend, you need to flash stock rom through Odin! This TWRP is for CM11 and to run CM11 the system needs to be modified in a way that Gingerbread/CM7 based roms will not work anymore! You may also need to find an empty userdata.img file for the S5360. I don't have it right now though...
Fixed!
Short update!
I have fixed the Problem with "how to fix samsung galaxy y s5360 that keeps on restarting or stuck on logo" !! Sry Links are not unlocked for me.
Now i am using merruks kernel with Hyperion 9! Working fine
The only Problem i have that i cant mount the second partition of my sd-card, ext2,3 and 4 are not working
So after downloading the stock ROM for the device, and flashing it using Odin it's stuck in boot loop and I don't know what to do.
PS: I flashed a Custom ROM and then flashed the stock ROM after a while.
I fixed the problem.
HaniSir said:
I fixed the problem.
Click to expand...
Click to collapse
Can you write how did you solved it? Others might need help and this thread may help them
sbappi said:
Can you write how did you solved it? Others might need help and this thread may help them
Click to expand...
Click to collapse
I just waited until the battery died and then kept trying to boot into the recovery, then did a wipe data and a reboot and waited.
Here is the video where I fixed the phone: