Can't root 9.0.12 - OnePlus 6T Questions & Answers

Hi all,
I followed the guide to update a rooted device but it didn't work I lost root. But even after flashing magisk 17, 18 and 18.1 I still can't get root.
Any advice or tips? Are you having the same problem?

Do you have the Magisk Manager app installed?

Ismael034 said:
Do you have the Magisk Manager app installed?
Click to expand...
Click to collapse
That is another strange thing... I don't see the app, but when I want to install it again it says 'Do you want to install the update...' [emoji848] and that fails... [emoji848][emoji848][emoji848]

Sometimes when you reboot the phone it appears

superiscch said:
That is another strange thing... I don't see the app, but when I want to install it again it says 'Do you want to install the update...' [emoji848] and that fails... [emoji848][emoji848][emoji848]
Click to expand...
Click to collapse
Any update? I seem in same boat ...on 9.0.12, some root apps work (torbot, liveboot) but AdAway says not rooted. Malwarebytes says rooted. Su command in terminal gets denied.....
This
Blows
As far as magisk manager it disappeared and apk install fails....

Sometimes magisk manager can get hung up in the update and then it doesn't want to let you in. Force stop, and see if i will let you in. Didn't work for me but you never know. I had to get it to where it was refusing to install the update, then while that was up go to settings where I could see it in my apps and uninstall it. Then I just installed it again, DLed the boot image, had magisk patch it, flashed it. The image and instructions are around here somewhere.

Was able to uninstall manager by using settings>apps but still cannot install magiskmanager and reroot attempt still no good. Still stuck.

Try flashing Magisk Uninstaller

veatesia said:
Try flashing Magisk Uninstaller
Click to expand...
Click to collapse
No dice.
And originally I did.
Flashed Magisk uninstaller
Flashed OOS update
Flashed TWRP
Rebooted
Flashed Magisk....
No love
I did retry the Magisk uninstaller zip again since you brought it up...but no.
I've even tried the TWRP terminal Magisk module uninstaller to see what is there....only shows Magisk 18.1....which is only sort of there....

The Magisk Manager app must be installed separately from Magisk itself. The zip file does not install the app.

GroovyGeek said:
The Magisk Manager app must be installed separately from Magisk itself. The zip file does not install the app.
Click to expand...
Click to collapse
The apk install fails.
The .zip flash to root appears to work...but not allowing access to system

naxalite971 said:
The apk install fails.
The .zip flash to root appears to work...but not allowing access to system
Click to expand...
Click to collapse
Resolved.
Backed up everything, did a factory reset
Booted via TWRP .img, reran 9.0.12 .zip via sideload,
Reinstalled TWRP
Rebooted into system
Rebooted into recovery
Installed magisk 18.1
Good to go.

Related

Magisk update

What is the best way to update Magisk on OP6T. Currently running v17.1 and if I would like to update to latest v18, what is the way to do it and not to brick the phone?
Thank for info
maraschino said:
What is the best way to update Magisk on OP6T. Currently running v17.1 and if I would like to update to latest v18, what is the way to do it and not to brick the phone?
Thank for info
Click to expand...
Click to collapse
You can either update via the Magisk Manager app,or,if you have TWRP,use it to update to the latest Magisk.
FWIW,I have TWRP installed,but,updated using the Magisk Manager app,using the recommended install suggestion given.
Just updated mine via app , after reboot there was no signal , no simcard ,no imei dont panic reboot one more time ,and everything is working as usual.
KOLIOSIS said:
You can either update via the Magisk Manager app,or,if you have TWRP,use it to update to the latest Magisk.
FWIW,I have TWRP installed,but,updated using the Magisk Manager app,using the recommended install suggestion given.
Click to expand...
Click to collapse
I have no TWRP, so I can just install through app and there will be no problem. It will install in the right slot automatically and I will keep root?
maraschino said:
I have no TWRP, so I can just install through app and there will be no problem. It will install in the right slot automatically and I will keep root?
Click to expand...
Click to collapse
Yes, I used the direct install via the Magisk Manager app & immediately rebooted,no problems at all.
KOLIOSIS said:
Yes, I used the direct install via the Magisk Manager app & immediately rebooted,no problems at all.
Click to expand...
Click to collapse
Thx for info
I always update through TWRP. Just updated. Since I always choose the hide magisk option replacing it with a random name I uninstall the app real quick before I reboot to recovery. Used to be if you didn't you would end up with two apps installed. Don't know if this is still an issue or not. Either way all your settings will still be there. I uninstall the app, reboot to recovery, flash Magisk. Boot back into the OS, all my settings are already there, so the only thing I have to do is rehide Magisk.
Do this update fix the charge problem when the device is off?
ELGeKo24 said:
Do this update fix the charge problem when the device is off?
Click to expand...
Click to collapse
Didn't fix it for me.
OS 9.0.7.
TWRP 3.2.3-9
Magisk v18
I'm having issues acquiring superuser rights with the new update (stock rom/kernel). On some apps it works on others it doesn't pop up with a notification, Titanium Backup being a notable one.
Any ideas?
edit: got it working by increasing the length of time before timeouts from 10sec to 60sec.
I usually start over.
I flash a virgin boot age to both slots.
Reboot with TWRP
Install TWRP zip
Install ElementalX and Magisk zips.
Change slots and reboot recovery
Install ElementalX and Magisk in this slot.
I have the same OS version and kernels etc flashed in both slots.
lostunsunghero said:
I'm having issues acquiring superuser rights with the new update (stock rom/kernel). On some apps it works on others it doesn't pop up with a notification, Titanium Backup being a notable one.
Any ideas?
edit: got it working by increasing the length of time before timeouts from 10sec to 60sec.
Click to expand...
Click to collapse
Or you can also disable the Battery Optimisation for Magisk
Hey guys, sorry for my stupid asking. I have following case:
I had installed an old version of magisk. Today I got the update offered in magisk manager app. I updated the manager first, now I have 2 magsik manager apps in my device. I opened the new one and it says that I haven't installed the latest version. So far so good.
I downloaded the latest V18.1 from GitHub and installed the zip via twrp.
It installed normally and booted as always.
But I still have 2 versions of the manager apps in my device. Old one says I have V18.1 installed, root access is there. Checked it with root checker.
The new manager app says that I haven't installed the latest version and I have an update available.
Does anyone have an idea how I can get to a normal state with 1 manager app ?
KOLIOSIS said:
You can either update via the Magisk Manager app,or,if you have TWRP,use it to update to the latest Magisk.
FWIW,I have TWRP installed,but,updated using the Magisk Manager app,using the recommended install suggestion given.
Click to expand...
Click to collapse
What is the recommended install suggestion? Only Zip or with Boot image patch?
Calvin1997 said:
Hey guys, sorry for my stupid asking. I have following case:
I had installed an old version of magisk. Today I got the update offered in magisk manager app. I updated the manager first, now I have 2 magsik manager apps in my device. I opened the new one and it says that I haven't installed the latest version. So far so good.
I downloaded the latest V18.1 from GitHub and installed the zip via twrp.
It installed normally and booted as always.
But I still have 2 versions of the manager apps in my device. Old one says I have V18.1 installed, root access is there. Checked it with root checker.
The new manager app says that I haven't installed the latest version and I have an update available.
Does anyone have an idea how I can get to a normal state with 1 manager app ?
Click to expand...
Click to collapse
Same thing with me. I tried it twice to set of something weird happened with the same result. And if you do a safetynet check on the old app it deletes the new one for me for some reason.
bladestonez said:
Same thing with me. I tried it twice to set of something weird happened with the same result. And if you do a safetynet check on the old app it deletes the new one for me for some reason.
Click to expand...
Click to collapse
You're right. If tried the safetynet check on the new one, and after that the new one was removed. Completely strange. I hope someone here knows what to do
No problem here just selected install then used recommended.
spjetrovic said:
No problem here just selected install then used recommended.
Click to expand...
Click to collapse
What's the recommended option? I have the options flash zip and patch Boot image but there isn't any "recommended" mark
spjetrovic said:
No problem here just selected install then used recommended.
Click to expand...
Click to collapse
So you just did the direct install option? Also are you running magisk with or without TWRP?
Calvin1997 said:
What's the recommended option? I have the options flash zip and patch Boot image but there isn't any "recommended" mark
Click to expand...
Click to collapse
This is what I get when I install from magiek manager.
Yes with TWRP

Help with installing Magisk on Verizon Samsung Galaxy Note 3 SM-N900V

I have read many threads and lots of videos and cannot seem to get the Magisk installed.
I have flashed back to stock many times with (N900VVRUEOF1_N900VVZWEOF1_N900VVRUEOF1_HOME.tar.md5) in order to try multiple methods.
Rooted with Arabictoolapp - used rootchecker to verify/application also says true for root
followed: https://forum.xda-developers.com/ve...guide-ob6-of1-root-bootloader-unlock-t3439010
installed SU from playstore to unlock bootloader using the adp method - shows developer mode to verify - using eMMc to verify CID starts with 15
followed: https://forum.xda-developers.com/ve...l/official-note-3-verizon-bootloader-t3359370
installed twrp using official twrp app & also tried ODIN in another trial (picked verizon americas and got twrp-3.2.3-0-hlte.img.tar and twrp-3.2.3-0-hlte.img )
turned phone off and boot into recovery to verify; at this time i created a recovery
using MagiskManager i downloaded the zip (Magisk-v18.1.ip) and flashed using twrp - no errors but when i restart the phone it says Magisk not installed
next attempt was to extract the boot.img from the stock OF1 and then flash the Magisk - no errors but when i restarted the phone it says the same thing - Magisk not installed
another attempt was to patch the boot.img and got a patch_boot.img then using TWRP i flashed the patch_boot.img - restarted and magisk not installed
after further digging, i tried another method which was to unroot using SU, reboot, go into recovery to then install Magisk - magisk not installed
*note each attempt to install Magisk unrooted my phone
*was able to use Magisk-uninstaller-20190204.zip to uninstall Magisk manager from recovery - icon went away
anyways i am completely stuck now. any suggestions or comments on my approach?
jordanfan23 said:
installed SU from playstore to unlock bootloader using the adp method - shows developer mode to verify - using eMMc to verify CID starts with 15
followed:
Click to expand...
Click to collapse
Did you uninstall SU before trying to install magisk. The two together may cause conflict.
cssr said:
Did you uninstall SU before trying to install magisk. The two together may cause conflict.
Click to expand...
Click to collapse
Yes my last attempt i tried.
please help! there has got to be something i am doing wrong or missing. i can flash the uninstall zip and it does uninstall the magisk manager
@cssr any other input or suggestions?
jordanfan23 said:
@cssr any other input or suggestions?
Click to expand...
Click to collapse
Try twrp 2.8.7 hltevzw. You are using the stock ROM which is android 5. Twrp 3.1 and higher is for android 7 and up. I missed that the first time I read your post.
cssr said:
Try twrp 2.8.7 hltevzw. You are using the stock ROM which is android 5. Twrp 3.1 and higher is for android 7 and up. I missed that the first time I read your post.
Click to expand...
Click to collapse
no go =(
@cssr should i try another version of magisk?
jordanfan23 said:
@cssr should i try another version of magisk?
Click to expand...
Click to collapse
Yes. Are you installing Magisk .zip in twrp and installing Magisk Manager APK after normal reboot?
cssr said:
Yes. Are you installing Magisk .zip in twrp and installing Magisk Manager APK after normal reboot?
Click to expand...
Click to collapse
what do you mean after normal reboot? so flash magisk in twrp. reboot. reboot again then install magisk manager? do you know what version of magisk i should run and where i can find the dl link?
What he means is you install the Magisk ZIP via TWRP in Recovery mode, reboot the phone, then you install Magisk Manager via the APK.
Go to magiskmanager dot com website which has the ZIP installer plus the APK for the Manager.
I only just recently tried to tackle this challenge. I also installed 0F1 with Odin, then rooted with Arabic. I was messing with Pokemon go and it wasn't happy I was rooted. I downloaded magisk manager, installed it that way. At reboot, angry message from Verizon that I have custom software and phone won't boot. I assume this is because I didn't install custom recovery.
If you figure a way to get this done, I will be grateful. One thing I don't quite follow. Magisk is a root method...so should we really be rooting the phone prior? Seems redundant and going against the whole point of magisk. Right?
I wanted to play around with spoofing GPS with PGO which requires making a GPS spoofer a system app (need root for that). Is that still possible using magisk?
I'll post any updates I have as well.

P2XL OTA + Magisk install before reboot = keep root

Didn't see anyone else confirming that the Magisk OTA install works with Android 10, so... confirming that it does.
Let OTA finish but don't reboot.
Go to Magisk Manager and "Install" Magisk - select the bottom option (includes the OTA phrase)
Reboot
Profit.
No problems noticed in a half-day of use.
Did you do this from Pie or from Android Q beta? Also, did you uninstall Magisk from the manager before you did the OTA?
Anybody know if this worked smoothly with their Viper4Android app?
This worked form me going from Android 9 with Magisk to Android 10
I'm glad I waited and saw this before moving to Android 10. This worked like a charm for me as well.
gregoryx said:
Didn't see anyone else confirming that the Magisk OTA install works with Android 10, so... confirming that it does.
Let OTA finish but don't reboot.
Go to Magisk Manager and "Install" Magisk - select the bottom option (includes the OTA phrase)
Reboot
Profit.
No problems noticed in a half-day of use.
Click to expand...
Click to collapse
Is this working on Novemeber 2019? i am rooted with magisk and twrp , but the OTA says error to download, try again. and never downloads and installed it.
---------- Post added at 09:16 PM ---------- Previous post was at 09:16 PM ----------
gregoryx said:
Didn't see anyone else confirming that the Magisk OTA install works with Android 10, so... confirming that it does.
Let OTA finish but don't reboot.
Go to Magisk Manager and "Install" Magisk - select the bottom option (includes the OTA phrase)
Reboot
Profit.
No problems noticed in a half-day of use.
Click to expand...
Click to collapse
Is this working on Novemeber 2019? i am rooted with magisk and twrp , but the OTA says error to download, try again. and never downloads and install it.
Ota usually gives me error cant install so i flash factory image without (-w) wiping then i reflash kernel and magisk, result is updating to latest image with everything stays at it is
kmry said:
Is this working on Novemeber 2019? i am rooted with magisk and twrp , but the OTA says error to download, try again. and never downloads and install it.
Click to expand...
Click to collapse
Is your recovery stock? It may not be clearly stated as I haven't read the thread in its entirety, but the OTA will fail with TWRP installed. It likely will also fail if the system partition is modified.
EDIT: I re-read your post. You clearly note using TWRP.
Nightf0x_007 said:
Ota usually gives me error cant install so i flash factory image without (-w) wiping then i reflash kernel and magisk, result is updating to latest image with everything stays at it is
Click to expand...
Click to collapse
How do you flash it, with flash fire, trough TWRP or from fastboot?
kmry said:
How do you flash it, with flash fire, trough TWRP or from fastboot?
Click to expand...
Click to collapse
Factory image flash via adb using pc, then i boot to twrp and reflash kernel and magisk
Anyone know how to get the native led configuration without using a custom rom or the lightflow app?
Should I update Magisk and manager before I do this?
My Magisk installed is 18.1 and it lists 20.1 as available
Magisk Manager installed is 7.0 and 7.4 is listed as available
If you wanna follow the official instructions :
https://topjohnwu.github.io/Magisk/tutorials.html#ota-installation
Nightf0x_007 said:
Factory image flash via adb using pc, then i boot to twrp and reflash kernel and magisk
Click to expand...
Click to collapse
i decided to flash the complete ota trough TWRP, installed normally but TWRP was gone, so installed again, then magisk then EX kernel, thanks.
kmry said:
i decided to flash the complete ota trough TWRP, installed normally but TWRP was gone, so installed again, then magisk then EX kernel, thanks.
Click to expand...
Click to collapse
Yes this also works, this was the procedure i was following before, but i dont have twrp installed in my device, it causes bootloop and device sensors errors idk why so i fastboot it, once i tried updating by flashing ota zip via twrp but device didnt bootup maybe cause twrp is not installed so since that what i do is reflashing factory image without -w
Nightf0x_007 said:
Yes this also works, this was the procedure i was following before, but i dont have twrp installed in my device, it causes bootloop and device sensors errors idk why so i fastboot it, once i tried updating by flashing ota zip via twrp but device didnt bootup maybe cause twrp is not installed so since that what i do is reflashing factory image without -w
Click to expand...
Click to collapse
do i have to delete the "-w" command only on the "flash-all.bat" or on the "flash-all.sc" too?
kmry said:
do i have to delete the "-w" command only on the "flash-all.bat" or on the "flash-all.sc" too?
Click to expand...
Click to collapse
Just the flash-all.bat if your using Windows. :good:
kmry said:
do i have to delete the "-w" command only on the "flash-all.bat" or on the "flash-all.sc" too?
Click to expand...
Click to collapse
.bat file only

Cannot install modules in Magisk

When I try to install a module, it gives me a "data/magisk not setup properly" error. Please help.
I have tried reinstalling magisk and pressing on direct install again but it still doesn't work.
KingCraft143 said:
When I try to install a module, it gives me a "data/magisk not setup properly" error. Please help.
I have tried reinstalling magisk and pressing on direct install again but it still doesn't work.
Click to expand...
Click to collapse
Is below that message, something asking you to update Magisk first?
If there isn't, well... Try to go Magisk Manager and check for updates, if there's any, just download and install them. Try again.
If there aren't, try to go XDA's Magisk thread, download Magisk uninstaller as well as flashable Magisk and Magisk Manager apk, both in their latest versions.
In case you've installed TWRP, Then reboot to Recovery and flash Magisk uninstaller... Just in case, flash TWRP again.
After that Reboot to Recovery once again and flash Magisk, then Reboot to System.
Then, in case you can't find Magisk Manager app, install it and update Magisk, this time from app itself.

Uninstalling Riru/Edexposed

Hi.
Yesterday my Snapchat got banned for third-party apps. Because I installed Riru core and Edexposed module and manager. It was working fine tho. But today I wanted to uninstall it, I couldn't uninstall it.
Until now, I've done;
-Removed riru core and edexposed from Magisk
-Uninstalled the Edexposed app
-Removed the files after searching from the File Manager and deleted those
But I think it's still not removed properly. My Magisk is showing both SafetyNet checks failed (basicIntegrity and ctsProfile). I also downloaded the uninstaller zip from the Edexposed manager but I don't know how to run that, it cannot be used on Magisk because it gives an error. I cannot also run from TWRP (can't find the file etc).
Can someone help me step by step how to remove it and then pass the Magisk safety check again.
Using the latest Magisk (20.4)
Manager (8.0.3)
Regards.
Grab and flash the EdXposed Uninstaller from here. You can also refer to this thread for more information.
shadowstep said:
Grab and flash the EdXposed Uninstaller from here. You can also refer to this thread for more information.
Click to expand...
Click to collapse
I wasn't getting the TWRP manager from where we flash zip files, when I loaded into recovery there were few options and I chose, "install from internal storage" but it gave me an error. Then I thought of using "Install from ADB" I'm getting this error;
https://prnt.sc/vnbgs9
Usmankhan.1996 said:
I wasn't getting the TWRP manager from where we flash zip files, when I loaded into recovery there were few options and I chose, "install from internal storage" but it gave me an error. Then I thought of using "Install from ADB" I'm getting this error;
https://prnt.sc/vnbgs9
Click to expand...
Click to collapse
You could try flashing the magisk uninstaller zip and then reflashing magisk, see if that helps?
AshenFire579 said:
You could try flashing the magisk uninstaller zip and then reflashing magisk, see if that helps?
Click to expand...
Click to collapse
I renamed the file to something without spaces and then flashed, the "argument" error was gone and it tried to flash it.
Now I'm facing an error, "installation failed" I don't know why is that...
It's the same error when installed from internal storage (in recovery mode). When trying to flash from ADB, it's still giving the same error.
1. Did you try flashing magisk uninstaller?
2, Perhaps try flashing "Magisk Manager for Recovery" in TWRP, going to the terminal option in TWRP and typing mm. It should open up an interactive manager allowing you to make sure EdXposed is 100% uninstalled. If it isn't try following the on screen prompts to fully get rid of it or use the manager to boot your phone into "core only mode"
Link to magisk manager for recovery: https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165
AshenFire579 said:
1. Did you try flashing magisk uninstaller?
2, Perhaps try flashing "Magisk Manager for Recovery" in TWRP, going to the terminal option in TWRP and typing mm. It should open up an interactive manager allowing you to make sure EdXposed is 100% uninstalled. If it isn't try following the on screen prompts to fully get rid of it or use the manager to boot your phone into "core only mode"
Link to magisk manager for recovery: https://forum.xda-developers.com/apps/magisk/module-tool-magisk-manager-recovery-mode-t3693165
Click to expand...
Click to collapse
I'm afraid I didn't get you. Did you read my first post? That's the problem I'm facing.
Actually, when I try to flash Edexposed uninstaller zip from ADB, it gives me an error, "installation failed"
Thank you for NOT helping.

Categories

Resources