Hi all,
i'm trying to pair my bluetooth OBD reader to my android headunit but seem to have a problem with the pass code. When pairing with my phone (as per the instructions) I am prompted to input the code (1234) but when pairing with the headunit it just connects and 'pairs' without any prompt which then causes a problem with the App associated with the reader.
Anyone come across something similar before?
Also is it perhaps worthwhile flashing my headunit with another rom? Mine uses the RK3188 so i'm guessing I need to be having a read of this thread
http://forum.xda-developers.com/showthread.php?t=2660662
When you just pair it through BT it doesn't promp for code until you open torque app and set up car profile that's how I got mine to work
Sent from my GT-P5210 using XDA Free mobile app
Yeah i'm not using the torque app its a bespoke OBD1 reader for Toyota engines, as soon as you connect to it with a phone etc it asks for the code but with this headunit it just instantly pairs without even asking and so when I open the app it just crashes as it hasn't been paired correctly.
ok so bumping this with some pictures as still have the problem.
Just to clarify the OBD reader is a bespoke item for Toyota engines and has a specific app for use with it with 100's of people are using on phones/tablets (including myself on LG G3).
instantly connects and pairs to headunit without the need to input passcode (unlike when pairing with my phone)
in the app for the obd reader you then select the reader from the list of devices, it should be indicated as OBD1READ like so
but instead reads
and the app insta crashes as a result of this
tiff_lee said:
Hi all,
i'm trying to pair my bluetooth OBD reader to my android headunit but seem to have a problem with the pass code. When pairing with my phone (as per the instructions) I am prompted to input the code (1234) but when pairing with the headunit it just connects and 'pairs' without any prompt which then causes a problem with the App associated with the reader.
Anyone come across something similar before?
Also is it perhaps worthwhile flashing my headunit with another rom? Mine uses the RK3188 so i'm guessing I need to be having a read of this thread
http://forum.xda-developers.com/showthread.php?t=2660662
Click to expand...
Click to collapse
Hi, tiff_lee, have you solved this issue? Will be very gratefoul for any help since I have the same problem. Regards.
pcmender2005 said:
When you just pair it through BT it doesn't promp for code until you open torque app and set up car profile that's how I got mine to work
Sent from my GT-P5210 using XDA Free mobile app
Click to expand...
Click to collapse
Yes, solved it this way.
Thank you.
I purchased a Hizpo 8in 5.1 radio and the damn thing has the Bluetooth restricted.. it will not allow downloaded apps to connect and obd2 scan adapters to connect as well. I purchased OBDLINK LX doesn't work but does require a password so I returned it and purchased a KIWI 3 with Bluetooth 4.0 no password required and the damn radio doesn't even recognize it.. I've updated it to the latest ROM version 1.92a... I hate the fact the Bluetooth app in the radio will not allow you to disable the password.
Plus if you do a factory reset the Bluetooth handsfree app for the phone is lost plus torque pro and who knows what else is lost...
I'm looking at the EONON GA6153F is this deck any good? It states it has bluetooth 4.0. I want a android deck that will work with the KIWI 3 OBDII. Does anyone have any suggestions?
Jeluvsk said:
I purchased a Hizpo 8in 5.1 radio and the damn thing has the Bluetooth restricted.. it will not allow downloaded apps to connect and obd2 scan adapters to connect as well. I purchased OBDLINK LX doesn't work but does require a password so I returned it and purchased a KIWI 3 with Bluetooth 4.0 no password required and the damn radio doesn't even recognize it.. I've updated it to the latest ROM version 1.92a... I hate the fact the Bluetooth app in the radio will not allow you to disable the password.
Plus if you do a factory reset the Bluetooth handsfree app for the phone is lost plus torque pro and who knows what else is lost...
I'm looking at the EONON GA6153F is this deck any good? It states it has bluetooth 4.0. I want a android deck that will work with the KIWI 3 OBDII. Does anyone have any suggestions?
Click to expand...
Click to collapse
The MTCD intel based ones allow obd2 adapters...I have a vgate3 and i have paired perfectly
Enviado desde mi D6603 mediante Tapatalk
Jeluvsk said:
I purchased a Hizpo 8in 5.1 radio and the damn thing has the Bluetooth restricted.. it will not allow downloaded apps to connect and obd2 scan adapters to connect as well. I purchased OBDLINK LX doesn't work but does require a password so I returned it and purchased a KIWI 3 with Bluetooth 4.0 no password required and the damn radio doesn't even recognize it.. I've updated it to the latest ROM version 1.92a... I hate the fact the Bluetooth app in the radio will not allow you to disable the password.
Plus if you do a factory reset the Bluetooth handsfree app for the phone is lost plus torque pro and who knows what else is lost...
I'm looking at the EONON GA6153F is this deck any good? It states it has bluetooth 4.0. I want a android deck that will work with the KIWI 3 OBDII. Does anyone have any suggestions?
Click to expand...
Click to collapse
So I can answer that question for you, I currently own both the GA6153F and a KIWI 3.
As of yet i have not been able to get the Kiwi3 to pair with the head unit. I've only had the unit for about 2 weeks and I'm waiting on feed back from Eonon on this and a couple of other things.
I am able to use the kiwi3 with my iphone6s via dashcommand for iOS with no problems. I've tried the following on the HU; dashcommand, carista & torque none of these would see the kiwi3. I'd get a message that read "turning on bluetooth... please wait" and yes bluetooth was already on, the apps would just stay stuck at that screen.
When I'm in the HU's bluetooth pairing screen it does not show/list the device.
hope that answers your question and saves you a little bit of aggravation... if they can resolve this issue I'll post an update.
Hi,
I've just purchased one of these head units for my car. I can connect my phone to it via Bluetooth just fine for calls and music, but I want to connect the head unit to my ODB2 bluetooth dongle so that I can create a Torque dashboard for it.
However, when I go to the general settings, Wifi is listed but Bluetooth is not. I've searched and searched but there is no way for me to connect the head unit to a Bluetooth device. I've tried various third party apps that claim they are able to enable Bluetooth and connect to devices, but they all just seem to hang when I try to enable Bluetooth. Tried a system reset too, but that Bluetooth option is still missing from the settings menu.
Please can anyone help?
G
I'm also interested in knowing this. Torque doesn't seem to detect my bluetooth ELM327 at all. I also attempted to connect a USB-based ELM327 module, and Torque seems to detect it, but it doesn't work beyond that, and the headunit gives me a low-power warning light.
Hi did you get anywhere with this I have the same problem can't get Bluetooth options to show
I have exactly the same problem. I'm running a PX5 unit from Witson. Custom built for a Koleos. MCU is not a standard MTC device. I have no bluetooth option available in the settings and the stock bluetooth app does not display any search option whatsoever. It seems that it broadcasts itself for other devices to detect it but you can't search for devices. Seems like they may be handling the bluetooth via the MCU directly and not via android which is strange because they openly claimed that this device was compatible with the OBD II dongle that I purchased. They even shipped it in the same package. Will keep looking and post if I find anything.
I had the same problem with a different Chinese head unit. Solved by buying a WiFi ELM327 dongle which connected fine with the head unit's built-in WiFi.
Update to my earlier post...I managed to get mine working over BT with the WITSON unit. In the end I had to disconnect my phone completely and reboot the unit. Then I found a search option on the dialer page. Searching found the OBD II module and I was able to pair with it. After I was paired with it I was able to add my phone again and both can run in parallel. I have not been able to test much but it seems like this continues to work until the unit goes into a deep sleep and shows the startup logo again. If that happens then I need to go through the learning process again. Meh...
Hi friend, just a question, in the dialer where did you find the search option I cant find it in my android radio??
If you have the swm 8802 you cannot connect to obd2 this requires bluetooth 4 and the 8802only support bluetooth 2
Always Connect ODB First
The ODB readers are a tad picky but they connect using the same menus as any other BT hardware (headset, speaker, etc). First, turn on the car ignition, do not start.
2. Make sure no other BT equipment is connected to the head unit or even on & near by.
Next, place the head unit in searching/Discovery mode and then & only then plug the ELM BT Module into the car ODB II Port. Most cars must be 96 & newer. 95 GM with for the plug but won't work. They're usually ODB 1.5, don't ask, your screwed.
Finally wait for the module to pop up and ask for the code, it's 1234 not 0000.
After your paired, THEN open Torque and let it connect. Don't start the vehicle till the car icon stops flashing.
You should be good to go from then on. If you ever have problems after that. Make sure the app is totally closed, force stop and then follow this procedure again.
---------- Post added at 07:55 AM ---------- Previous post was at 07:30 AM ----------
vincentstans said:
If you have the swm 8802 you cannot connect to obd2 this requires bluetooth 4 and the 8802only support bluetooth 2
Click to expand...
Click to collapse
Mine connected no problem. Did it just like I do on my phone. I just got mine too though. Could be an update maybe
the original question wasn't answered and I have that problem too. I don't have a Bluetooth discovery/search option anywhere. the small bluetooth-like icon on the main panel just changes the color of the leds.
so can't connect new phone. although Bluetooth seems to be working, since an older phone, already paired, is still working.
Following this as my head unit is same. Theres no blietooth menu/option but it connects to a phone.
Ive tried a third party bluetooth manager but all that says is bluetooth disabled by admin??
A fix
That happened to me trying to add and ODB2 bt dongle. I had to use the app for bluetooth linking provided by the head unit. When I purchased the unit, I changed the bluetooth discovery and pairing code to 0000. Well, changing it to 1234 allowed me to add the ODB dongle.
I saw it on a YouTube video, and well, it worked for me. (And no, no native bluetooth option, came disabled for my unit as you said)
Hope it works for you too.
same problem with me
Hi sir did you found solution for this problem. I also have this problem with my native bluetooth. when i turn open system setting bluetooth missing. i try to open using shotcut and found shotcut to turn on bluetooth but when i turn on. it do nothing.
I can play music, make call using bluetooth app provide from head unit. Problem is i cant use it with OBD2 . same with your statement this bluetooth only stream signal to other. this Head unit cannot find other bluetooth.
Kindly please assist me. did this head unit still have hope to turn on native bluetooth or not. I still search many post regarding this issue. But issue bluetooth like this not many discussion.
Hello there,
My problem is some how different. My hu use the bluethoot to find the obd2 adapter but there is no dedicated pair button. I can pair my phone for calls and music but connecting from phone to hu.
My unit is a 8227l from seicane.
Has anyone any solution? Thank you!
blongro said:
Hello there,
My problem is some how different. My hu use the bluethoot to find the obd2 adapter but there is no dedicated pair button. I can pair my phone for calls and music but connecting from phone to hu.
My unit is a 8227l from seicane.
Has anyone any solution? Thank you!
Click to expand...
Click to collapse
Change the pair code in the bluetooth custom app provided, to 1234 and try again.
I had this happen and I think I figured it out.... in factory settings there's an option to choose bluetooth connect automatically or with pin. I checked with pin and was able to pair. I think the options are reversed in the settings
I have the same problem i can't connect to the android 7.1 car head unit any more , the bluetooth setting is missing , the wifi settings appear but bluetooth doesn't appear any more
Anyone can help me to fix this issue please ?
Karemz said:
I have the same problem i can't connect to the android 7.1 car head unit any more , the bluetooth setting is missing , the wifi settings appear but bluetooth doesn't appear any more
Anyone can help me to fix this issue please ?
Click to expand...
Click to collapse
I bought a bluetooth usb adapter and I can't select it on the system. I think this would be the way out, but we need to replace the driver inside android. Does anyone have any ideas?
venomrocha said:
I bought a bluetooth usb adapter and I can't select it on the system. I think this would be the way out, but we need to replace the driver inside android. Does anyone have any ideas?
Click to expand...
Click to collapse
I have a Teyes Spro with the same Bluetooth issues as most on this post describe. Did you find an answer to your usb adaptor to solve the Bluetooth problem? I was told to add a line to the config.txt file but cannot locate where to access that to add it.
Bought a Teyes Spro headunit and I have a problem with Bluetooth discovery on my obd II and tpms modules. Does anyone know what is in the "Developer" tab? It is password protected not accessible. The 168 factory access code does not work for it. Anyone know the password?
hello to all
i have enable the OBD present on my unit and added to the connector. it is connected by bluetooth (or i should connect by usb)?
altough i cannot pair it i think
is there any procedure to correctly do it?
thanks
It should work with bluetooth but you have to pair it through the OBD app not the Android settings menu.
nic2k said:
It should work with bluetooth but you have to pair it through the OBD app not the Android settings menu.
Click to expand...
Click to collapse
thanks @nic2k i do not have acess to bluetooth settings...only phone bluetooth on my device. what do you suggest?
thanks
mclaudio said:
hello to all
i have enable the OBD present on my unit and added to the connector. it is connected by bluetooth (or i should connect by usb)?
altough i cannot pair it i think
is there any procedure to correctly do it?
thanks
Click to expand...
Click to collapse
go to my thread:
https://forum.xda-developers.com/an...china-head-unit-8227l-obd-connection-t3990607
Px6 rk3399 obd
HI All,
I just installed this unit. ( sorry, will not allow me to post link)
Android9 13.6" Tesla style Car No DVD Player GPS Navigation For Ford Mondeo Fusion MK5 2017+ radio tape recorder multimedia unit
There is a setting for Speed+ Rotation. which does not seem to work, I have tried several possibilities but can't get it to work. I am of the understanding the the OBD Plug is connected to the ECU under the dash. There are only 2 pins on the plug from the Head unit. Is there an additional setting or perhaps i'm missing something.
Goodmorning everybody, i bought an Android Radio after a Windows radio, ever by dealer BOBWITSON. I bought it with all accessories (TV, DAB, TMPS, DVR and OBD adaptator). But, the original app installed in the unit don't workor don't comunicated with the accessories .I think that I can be resolve this problem with use other app, but i don't know they. So, i explain the problem:
1) Android Auto: after i download the app on app store it work same the smartphone, problamy i resolve it using the HEADUNIT RELOADED, but i don't tryed it
2)ADAS function, with all app that i tryed it doesn't work, and I see the DVR inly with one app
3) TMPS, the original app don't work, but i resolve using a app StoreBao USB TPMS
4) Dab, I search an app that work offline
5) OBD, I try the app Torque or dashcommand, but obd2 Bluetooth adapter doesn't connect
6) Voice Comand, work only with connection and by google assistant. There is a method for work it in offline mode ?? or another assitant that work offline?