I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked. That's weird, I thought a phone with open bootloader would not receive OTA, but mine does.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damn thing.
Everything works fine, except for Netflix that can't be installed no longer and my bank software who keeps complaining.
C:\MinimalADBFastboot>fastboot flash logo logo.bin
target reported max download size of 534773760 bytes
sending 'logo' (2186 KB)...
OKAY [ 0.052s]
writing 'logo'...
OKAY [ 0.099s]
finished. total time: 0.161s
C:\MinimalADBFastboot>fastboot flash boot boot.img
target reported max download size of 534773760 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.397s]
writing 'boot'...
(bootloader) Image signed with key bad key
OKAY [ 0.285s]
finished. total time: 0.689s
C:\MinimalADBFastboot>fastboot flash recovery recovery.img
target reported max download size of 534773760 bytes
sending 'recovery' (20580 KB)...
OKAY [ 0.491s]
writing 'recovery'...
(bootloader) Image signed with key bad key
OKAY [ 0.364s]
finished. total time: 0.861s
I just dunno what to do to relock, any advice ?
CanadianGixxerman said:
I reloaded my G5 Plus with POTTER_RETAIL_7.0_NPNS25.137-93-4_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip sucessfuly. However, I was not able to relock the bootloader :
C:\Moto potter>fastboot oem lock
...
(bootloader) Still require signed boot.img
It got OTA'ed to Oreo 8.1 latter on, but still bootloader unlocked. That's weird, I thought a phone with open bootloader would not receive OTA, but mine does.
I just went through the flashing process to POTTER_RETAIL_8.1.0_OPSS28.85-17-4, same damn thing.
Everything works fine, except for Netflix that can't be installed no longer and my bank software who keeps complaining.
C:\MinimalADBFastboot>fastboot flash logo logo.bin
target reported max download size of 534773760 bytes
sending 'logo' (2186 KB)...
OKAY [ 0.052s]
writing 'logo'...
OKAY [ 0.099s]
finished. total time: 0.161s
C:\MinimalADBFastboot>fastboot flash boot boot.img
target reported max download size of 534773760 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.397s]
writing 'boot'...
(bootloader) Image signed with key bad key
OKAY [ 0.285s]
finished. total time: 0.689s
C:\MinimalADBFastboot>fastboot flash recovery recovery.img
target reported max download size of 534773760 bytes
sending 'recovery' (20580 KB)...
OKAY [ 0.491s]
writing 'recovery'...
(bootloader) Image signed with key bad key
OKAY [ 0.364s]
finished. total time: 0.861s
I just dunno what to do to relock, any advice ?
Click to expand...
Click to collapse
An unlocked bootloader has nothing to do with getting OTA updates. At least you get the unlock code from the manufacturer himself.
Only changes in /system or /vendor like rooting or other tweaks make OTA fail.
About locking the BL, a bit of research would have taken you here: https://forum.xda-developers.com/g5-plus/how-to/how-to-lock-bootloader-potter-version-t3694952
For Oreo the whole sets of commands are for
Locking:
-----------------
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8
fastboot flash boot boot.img
fastboot oem lock
-------------------
Flashing:
-------------------
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
--------------------
Edited because of wrong number of sparechunk files for Oreo firmwares.
@Wolfcity
Unlike you supposed, I just did not throw my problem in the forum and waited for someone else to hand me a solution on a silver plate. I did do my homeworks, I did *MANY* searches, I did see the post you pointed me toward, that one and many many others that resembled it closely. But this whole endeavour did not lead me to my expected objective, which is to relock my phone. I am in the same loop I was in when I started trying : The second time I issue the «fastboot oem lock» command, I get this :
C:\Moto potter>fastboot.exe oem lock
...
(bootloader) Still require signed boot.img
OKAY [ 0.003s]
finished. total time: 0.003s
And the BL does not lock.
CanadianGixxerman said:
@Wolfcity
Unlike you supposed, I just did not throw my problem in the forum and waited for someone else to hand me a solution on a silver plate. I did do my homeworks, I did *MANY* searches, I did see the post you pointed me toward, that one and many many others that resembled it closely. But this whole endeavour did not lead me to my expected objective, which is to relock my phone. I am in the same loop I was in when I started trying : The second time I issue the «fastboot oem lock» command, I get this :
C:\Moto potter>fastboot.exe oem lock
...
(bootloader) Still require signed boot.img
OKAY [ 0.003s]
finished. total time: 0.003s
And the BL does not lock.
Click to expand...
Click to collapse
You can get signed images from Lenovo Moto smart assistant app, just go for rescue and let the firmware gets download, then go to the c/LMSA/ROM there you can find the firmware which has signed, use that image for locking bootloader, then you can lock your bootloader.and don't get anger on wolfcity he just try to help you as, some person don't know how to lock bootloader so they just post on XDA without reading the other thread only.
CanadianGixxerman said:
@Wolfcity
Unlike you supposed, I just did not throw my problem in the forum and waited for someone else to hand me a solution on a silver plate. I did do my homeworks, I did *MANY* searches, I did see the post you pointed me toward, that one and many many others that resembled it closely. But this whole endeavour did not lead me to my expected objective, which is to relock my phone. I am in the same loop I was in when I started trying : The second time I issue the «fastboot oem lock» command, I get this :
C:\Moto potter>fastboot.exe oem lock
...
(bootloader) Still require signed boot.img
OKAY [ 0.003s]
finished. total time: 0.003s
And the BL does not lock.
Click to expand...
Click to collapse
I don't wanted to sound rude or something like that.
You didn't mention that you used all the fastboot locking commands in you first post, you just posted three lines of flashing boot, recovery and logo.
So no offense.
What sounds strange to me is that Netflix and your banking app aren't working with an unlocked bootloader. Normally these applications are looking for traces of rooting methods like magisk or SuperSU. I'm unlocked and rooted with magisk and Netflix is working for me if I put in on magisk's hide list. Maybe you have some files on your device that trigger these anti rooting mechanisms? Sometimes just a file or folder named magisk could be enough.
Wolfcity said:
I don't wanted to sound rude or something like that.
You didn't mention that you used all the fastboot locking commands in you first post, you just posted three lines of flashing boot, recovery and logo.
So no offense.
What sounds strange to me is that Netflix and your banking app aren't working with an unlocked bootloader. Normally these applications are looking for traces of rooting methods like magisk or SuperSU. I'm unlocked and rooted with magisk and Netflix is working for me if I put in on magisk's hide list. Maybe you have some files on your device that trigger these anti rooting mechanisms? Sometimes just a file or folder named magisk could be enough.
Click to expand...
Click to collapse
No hard feelings.
It turns out that with your instructions (1st part : Locking) I was sucessful at my aim, finally. It did whine again about the signed image requirement after line 2, I continued [9 sparsechunks though, not 5 ... ], then, upon hitting «enter» after the last line [fastboot oem lock], Shazam, it locked.
You may be right about some left over garbage files [or traces of] that could still be present in the file system. I have loaded many customs roms last year on this phone, magisk and SuperSu as well.
Last but not least : Thank you.
CanadianGixxerman said:
No hard feelings.
It turns out that with your instructions (1st part : Locking) I was sucessful at my aim, finally. It did whine again about the signed image requirement after line 2, I continued [9 sparsechunks though, not 5 ... ], then, upon hitting «enter» after the last line [fastboot oem lock], Shazam, it locked.
You may be right about some left over garbage files [or traces of] that could still be present in the file system. I have loaded many customs roms last year on this phone, magisk and SuperSu as well.
Last but not least : Thank you.
Click to expand...
Click to collapse
Good to hear it worked out for you at last.
Seems that these "unsigned" messages are nothing to worry about to much. Sorry for the "sparechunk thing", copied the wrong flashall.bat file, this is the one for Oreo :https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
with 8 sparechunk files.
Last but not least: You're welcome.
Yeah this same thing happened to me today morning.. most guides have till sparsechunk4.. where as oreo has uptill 8.. so u need to flash the rest i.e 5,6,7,8. And then it will lock..
Wolfcity said:
Good to hear it worked out for you at last.
Seems that these "unsigned" messages are nothing to worry about to much. Sorry for the "sparechunk thing", copied the wrong flashall.bat file, this is the one for Oreo :https://www.dropbox.com/s/zfh67uzfle9hsco/flashallO.bat?dl=0
with 8 sparechunk files.
Last but not least: You're welcome.
Click to expand...
Click to collapse
I also had same error. Followed what you said. Finally locked bootloader. I am very happy now.
Thank you.
Might be good for someone who has gone through it, to make a new write-up, with current info. The longer these phones have been out, and bootloader unlocked, the more fragmented the info gets. It gets harder to know what currently works, and what could possibly "fubar" the phone.
[email protected] said:
Might be good for someone who has gone through it, to make a new write-up, with current info. The longer these phones have been out, and bootloader unlocked, the more fragmented the info gets. It gets harder to know what currently works, and what could possibly "fubar" the phone.
Click to expand...
Click to collapse
What do you mean? An "locking BL guide" or something more complete like "flashing/locking/encrypting/rooting"? I'm willing to that but I have to know what you guys need.
Wolfcity said:
What do you mean? An "locking BL guide" or something more complete like "flashing/locking/encrypting/rooting"? I'm willing to that but I have to know what you guys need.
Click to expand...
Click to collapse
Sure,,,, all of it! I unlocked my first G5 plus a year and a half ago. I have hard bricked it 3 times, and now use it for a test phone, as it has an addison bootloader. My everyday G5 plus is unlocked and rooted, but I've kept it on stock roms and kernels, due to a little fear of how easily these can be corrupted. I am certainly not ignorant of most of the workings with these, even going so far as to use Qualcomm's factory utilities to dig deep inside. However, that being said, what worked when I first unlocked my original, isn't totally pertinent today. Nougat and Oreo factory roms, nougat, oreo, pie developer roms, 64 bit and 32 bit, all add to a confusing set list of what can be safely done without irreversible consequences. I've kept up on these forums for almost 2 years, but the fragmentation of guides makes it confusing enough for myself, much less a novice. Example of things that can go wrong to unsuspecting, is the loss of touchscreen with stock oreo. I haven't experienced it, but it is out there. I'm just saying it would be hugely beneficial for all, if we could get some current guides, stickied in place of our outdated ones. I have the test phone that I have put through the wringer, and am more than willing to use it as a guinea pig for any other processes that may add to the guides.
[email protected] said:
Sure,,,, all of it! I unlocked my first G5 plus a year and a half ago. I have hard bricked it 3 times, and now use it for a test phone, as it has an addison bootloader. My everyday G5 plus is unlocked and rooted, but I've kept it on stock roms and kernels, due to a little fear of how easily these can be corrupted. I am certainly not ignorant of most of the workings with these, even going so far as to use Qualcomm's factory utilities to dig deep inside. However, that being said, what worked when I first unlocked my original, isn't totally pertinent today. Nougat and Oreo factory roms, nougat, oreo, pie developer roms, 64 bit and 32 bit, all add to a confusing set list of what can be safely done without irreversible consequences. I've kept up on these forums for almost 2 years, but the fragmentation of guides makes it confusing enough for myself, much less a novice. Example of things that can go wrong to unsuspecting, is the loss of touchscreen with stock oreo. I haven't experienced it, but it is out there. I'm just saying it would be hugely beneficial for all, if we could get some current guides, stickied in place of our outdated ones. I have the test phone that I have put through the wringer, and am more than willing to use it as a guinea pig for any other processes that may add to the guides.
Click to expand...
Click to collapse
You're lucky you have the ability to financially purchase a second G5 Plus to use as a failsafe. When I purchased mine it was roughly around $300-400 (was brand new) so to have purchased another at the time wasn't an option, and may as well purchase a 700+ flagship with that money. To this day I've owned over 30 devices and tested well over that. Thus far only the Galaxy S2 and the Motorola G5 Plus were the only two that have surpassed a year with good stable service. I don't even purchase the phone cases cause devices are supposed to be visually appealing like cars, because tech will always be sexxy. Anyways, my point was since the Photon Q back in early 2014 to this G5 Plus, I've really liked Motorola. If you take the time the align this phone purrs. But I need to upgrade soon as.. Thinking of getting a Pixel 3 when it reaches my shores.. Anyways, it's 1:28am, goodnight.
I was able to purchase the second phone for less than $100 US, slightly used. So it was a no brainer to have a guinea pig phone.
Wolfcity said:
An unlocked bootloader has nothing to do with getting OTA updates. At least you get the unlock code from the manufacturer himself.
Only changes in /system or /vendor like rooting or other tweaks make OTA fail.
About locking the BL, a bit of research would have taken you here: https://forum.xda-developers.com/g5-plus/how-to/how-to-lock-bootloader-potter-version-t3694952
For Oreo the whole sets of commands are for
Locking:
-----------------
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8
fastboot flash boot boot.img
fastboot oem lock
-------------------
Flashing:
-------------------
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
--------------------
Edited because of wrong number of sparechunk files for Oreo firmwares.
Click to expand...
Click to collapse
Hi!!
I need to relock my Moto G5 Plus, because my country use a Covid App to transit trough states.
And I need it to use because I´m a essential worker. This App check the locked / unlocked devices.
I Know that Netlix do the same, but it never mattered to me to that app.
Now I really need to Re Locked my phone
I have tried several methods.. and doesn´t work any of them
Mr.BUBU said:
Hi!!
I need to relock my Moto G5 Plus, because my country use a Covid App to transit trough states.
And I need it to use because I´m a essential worker. This App check the locked / unlocked devices.
I Know that Netlix do the same, but it never mattered to me to that app.
Now I really need to Re Locked my phone
I have tried several methods.. and doesn´t work any of them
Click to expand...
Click to collapse
You can orientate yourself by this guide but as the one is for Nougat you need to correct the number of the sparechunk files:
How to re-lock Bootloader of all Potter version
Hi guys, finally I succed in relock my XT1685 Bootloader on RETEU, so I will guide you to relock your bootloader. DISCLAIMER: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm...
forum.xda-developers.com
So the first set of commands should be:
First set:
Lock.
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash boot boot.img
fastboot oem lock
Second set:
Flashing firmware.
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Device is now full stock with locked bootloader.
For the second set of commands you can use a flashall.bat file like this:
Dropbox - File Deleted - Simplify your life
www.dropbox.com
It may look like the first set would be enough but that's not true, you have to flash the whole firmware afterwards.
Be aware that all of your internal data (apps, settings and everything you have in internal storage) will be erased so make backups of everything. Also backup all partitions with TWRP especially persist and efs!
This tutorial may help you to find the correct firmware for your device (links available) and also guide you through the flashing process of the whole firmware;
[GUIDE] Moto G5 Plus: Flashing Stock Firmware & Rooting [2021]
Flashing signed stock firmware: You need: Latest signed stock firmware: Europe (RETEU): https://mirrors-obs-2.lolinet.com/firmware/motorola/2017/potter/official/RETEU/ India (RETIN)...
forum.xda-developers.com
Maybe use also the tools and drivers from there.
Wolfcity said:
You can orientate yourself by this guide but as the one is for Nougat you need to correct the number of the sparechunk files:
How to re-lock Bootloader of all Potter version
Hi guys, finally I succed in relock my XT1685 Bootloader on RETEU, so I will guide you to relock your bootloader. DISCLAIMER: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm...
forum.xda-developers.com
So the first set of commands should be:
First set:
Lock.
Code:
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash boot boot.img
fastboot oem lock
Second set:
Flashing firmware.
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase modemst1
fastboot erase modemst2
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash oem oem.img
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Device is now full stock with locked bootloader.
For the second set of commands you can use a flashall.bat file like this:
Dropbox - File Deleted - Simplify your life
www.dropbox.com
It may look like the first set would be enough but that's not true, you have to flash the whole firmware afterwards.
Be aware that all of your internal data (apps, settings and everything you have in internal storage) will be erased so make backups of everything. Also backup all partitions with TWRP especially persist and efs!
This tutorial may help you to find the correct firmware for your device (links available) and also guide you through the flashing process of the whole firmware;
[GUIDE] Moto G5 Plus: Flashing Stock Firmware & Rooting [2021]
Flashing signed stock firmware: You need: Latest signed stock firmware: Europe (RETEU): https://mirrors-obs-2.lolinet.com/firmware/motorola/2017/potter/official/RETEU/ India (RETIN)...
forum.xda-developers.com
Maybe use also the tools and drivers from there.
Click to expand...
Click to collapse
Wait so I have to run the bootloader lock first and then flash the firmware for my Motorola one p30 play as well?
smartasiankid said:
Wait so I have to run the bootloader lock first and then flash the firmware for my Motorola one p30 play as well?
Click to expand...
Click to collapse
No, the user who was asking wanted to lock his BL so I gave him the lock commands too.
I don't know anything about your device but normally the BL has to be unlocked to flash firmware on a Moto.
Wolfcity said:
No, the user who was asking wanted to lock his BL so I gave him the lock commands too.
I don't know anything about your device but normally the BL has to be unlocked to flash firmware on a Moto.
Click to expand...
Click to collapse
Oh okay. I tried relocking the bootloader on Moto one p30 play but when repeatedly entering 'fastboot oem lock' it says "still require signed boot.img" and even after I flash the boot.img when it asks to whenever I enter the fastboot oem lock command it says "still require signed boot.img"
Can you help me out please?
Related
Follow at your own risk. Unlocked bootloader required.
This is how I was able to fix my softbrick after updating to -64 on my US XT1625 Amazon G4. Credit goes to Android Doctor (his YouTube tutorial), I changed his fastboot commands a little though to better match how a real Moto upgade would act (based off of the flashfile.xml file in the firmware zip).
From here download "XT1625_ATHENE_AMAZON_MPJ24.139-64_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" (Here's a direct link if it works for you).
Extract that zip to a folder and copy ADB/fastboot files to that folder. Navigate or open a command prompt window to that directory. Boot your phone into fastboot (power it off and power it back on holding the volume down key or just run "adb reboot bootloader" if you're in recovery). Run the following commands from the command prompt window when your phone is in the bootloader and your command prompt window is navigated to the folder you extracted XT1625_ATHENE_AMAZON...zip to (you can also copy and paste them all into command prompt):
Running the below commands unmodified will wipe your data. You can try to run them without the "fastboot erase userdata" command at the bottom to possibly save your data (I can't guarantee anything).
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img_sparsechunk.0
fastboot flash oem oem.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Again, I give no guarantees on this and probably won't be checking back on this thread for replying or updating. Also note, Amazon ads will return to your lock screen.
beano311 said:
Follow at your own risk.
This is how I was able to fix my softbrick after updating to -64 on my US XT1625 Amazon G4. Credit goes to Android Doctor (his YouTube tutorial), I changed his fastboot commands a little though to better match how a real Moto upgade would act (based off of the flashfile.xml file in the firmware zip.
From here download "XT1625_ATHENE_AMAZON_MPJ24.139-64_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip" (Here's a direct link if it works for you).
Extract that zip to a folder and copy ADB/fastboot files to that folder. Navigate or open a command prompt window to that directory. Boot your phone into fastboot (power it off and power it back on holding the volume down key or just run "adb reboot bootloader" if you're in recovery). Run the following commands from the command prompt window when your phone is in the bootloader and your command prompt window is navigated to the folder you extracted XT1625_ATHENE_AMAZON...zip to (you can also copy and paste them all into command prompt):
Running the below commands unmodified will wipe your data. You can try to run them without the "fastboot erase userdata" command at the bottom to possibly save your data (I can't guarantee anything).
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img_sparsechunk.0
fastboot flash oem oem.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot erase DDR
fastboot oem fb_mode_clear
fastboot reboot
Again, I give no guarantees on this and probably won't be checking back on this thread for replying or updating. Also note, Amazon ads will return to your lock screen.
Click to expand...
Click to collapse
Will this work on a locked bootloader?
Mathracer1 said:
Will this work on a locked bootloader?
Click to expand...
Click to collapse
I think not. Check out the youtube link I posted. The first thing you see in the video description is "UNLOCKED BOOTLOADER REQUIRED BEFORE DOING THIS THIS,UNLOCKED BOOTLOADER RQUIRED BEFORE DOING THIS, UNLCOKED BOOTLOADER REQUIRED BEFORE DOING THIS". I'll update the main post to reflect this.
I tried this with a unlocked bootloader and it worked.
I then locked the bootloader at the last step. However, the software status still shows "modified". How do I make it official?
SemiConductor said:
I tried this with a unlocked bootloader and it worked.
I then locked the bootloader at the last step. However, the software status still shows "modified". How do I make it official?
Click to expand...
Click to collapse
I don't think there is a way of relock. Well, whatever you do and whatever you see on the screen or your PC says it has been locked again, the hardware counter tells the bootloader has been unlocked once. I read this from somewhere else on the internet. Correct me if it is wrong.
beano311 said:
I think not. Check out the youtube link I posted. The first thing you see in the video description is "UNLOCKED BOOTLOADER REQUIRED BEFORE DOING THIS THIS,UNLOCKED BOOTLOADER RQUIRED BEFORE DOING THIS, UNLCOKED BOOTLOADER REQUIRED BEFORE DOING THIS". I'll update the main post to reflect this.
Click to expand...
Click to collapse
Yes! its able to flash whith Locked Bootloader, but only flash oem, system, recovery, non-hlos, cache, userdata, flash boot, bootloader,gpt, always because a locked bootloader
Lussardi said:
Yes! its able to flash whith Locked Bootloader, but only flash oem, system, recovery, non-hlos, cache, userdata, flash boot, bootloader,gpt, always because a locked bootloader
Click to expand...
Click to collapse
Please could you specify better that I should install, I am desperate :llorando:
stephydth said:
Please could you specify better that I should install, I am desperate :llorando:
Click to expand...
Click to collapse
Code:
only flash oem, system, recovery, non-hlos, cache, userdata, boot, bootloader
download firmware zip extract and flash above mentioned
Hello guyz do you have or post the latest version stock rom for Moto G4 Plus XT1643 ?
Waiting eagerly for your heads up
edit :
head to this link for flashing procedure and lock/ re-lock the bootloader on moto g4 plus :
https://forum.xda-developers.com/showpost.php?p=70383231&postcount=15
http://forum.xda-developers.com/mot...d-ota-nougat-ota-moto-g4-plus-t3517059/page37
Sent from my Moto G (4) using Tapatalk
Sent from my Moto G (4) using Tapatalk
zazzy24 said:
http://forum.xda-developers.com/mot...d-ota-nougat-ota-moto-g4-plus-t3517059/page37
Sent from my Moto G (4) using Tapatalk
Sent from my Moto G (4) using Tapatalk
Click to expand...
Click to collapse
this is captured ota I'm asking for updated stock rom for flashing.. thanks for your head up (Y)
snd team said:
this is captured ota I'm asking for updated stock rom for flashing.. thanks for your head up (Y)
Click to expand...
Click to collapse
It isn't released. That's already discussed.
snd team said:
Hello guyz do you have or post the latest version stock rom for Moto G4 Plus XT1643 ?
Waiting eagerly for your heads up
Click to expand...
Click to collapse
Find it here. It's flashable ROM zip:
removed link.. mod edit: not flashable..
removed link.. mod edit: not flashable..
Anyone tried this ? is it compatible with Indian (XT1643) version?
Arivendu said:
Find it here. It's flashable ROM zip:
removed link.. mod edit: not flashable..]
Click to expand...
Click to collapse
Don't misguide users. You shouldn't post if you are not sure about something.
First, its not a zip file. Its a rar file.
Second, its not flashable. You need to flash it using fastboot.
Arivendu said:
Find it here. It's flashable ROM zip:
https://cloud.mail.ru/public/CKF3/AWVREk6s9
Click to expand...
Click to collapse
Thanks buddy you're the best
praveenbda said:
Anyone tried this ? is it compatible with Indian (XT1643) version?
Click to expand...
Click to collapse
yes sure see the topic title and also tested on XT1643
also I'm able to re-lock the bootloader
TO relock the bootloader and Flashing
First of all download the stock firmware rar file ( thanks to Arivendu for heads up) - multi platform support (windows linux etc)
https://cloud.mail.ru/public/CKF3/AWVREk6s9
Mirrors :
https://files.fm/u/hfapbktm
https://drive.google.com/open?id=0B-ReAPgYg5ISNFpaeV92V2hRaWc
https://mega.nz/#!0oV33RhI!5U51UqC4v16qTSN5ur6FAV7EOpLTXL0Pfm12n71GGwc
***** this firmware also worked for other moto g4 variants *****
extract it
open folder name : athene_oem_user_7.0_NPJ25.93-11_12_release
under the folder their is a folder name "Windows"
copy files from "windows" folder to root folder
and use below command to re-lock bootloader and flash your phone with latest version of stock 7.0 (tested on xt1643)
SHIFT + Mouse right click >>> open command window here
and enter this commands one by one
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
Or download the oem unlock and flash mobile.zip (833.6 KB) from atatchment and place the files in root dir where you extracted the firmware
and run the OEM lock.bat file for automation
if the device not reboot after firmware flash run this command at the end :
Code:
fastboot reboot
I can confirm that rar contains factory images and it's working fine on my Moto G4 Plus XT1644 64GB/4Gb RAM (RETUS). Finally, running Nougat on my device.
snd team said:
no i don't have any link and i confirm it is original moto firmware
Click to expand...
Click to collapse
Thanks, I had a browse and it looks like it's from http://lenovo-forums.ru/topic/22076-moto-g⁴-plus-npj2593-11/
Although the website says they are not an official Lenovo forum, if it's working for people, that's great. It'd be nice if we get a Nougat ROM we can flash in stock recovery without adb fastboot
Massive cleaning on the thread.. Please be warry of whatever type of file you are flashing on your devices.. A little mistake will brick your devices. I hope no one will post again a non-flashable zip.. and pls. put into considerations the knowledge of others. Not everyone knows what a RAR file or a ZIP file is... Please be cautious.. AND LASTLY .. NO FLAMING ..... NEVER ALLOWED HERE
reyscott said:
Massive cleaning on the thread.. Please be warry of whatever type of file you are flashing on your devices.. A little mistake will brick your devices. I hope no one will post again a non-flashable zip.. and pls. put into considerations the knowledge of others. Not everyone knows what a RAR file or a ZIP file is... Please be cautious.. AND LASTLY .. NO FLAMING ..... NEVER ALLOWED HERE
Click to expand...
Click to collapse
thanks for cleaning cheers
Fastboot flashing steps
snd team said:
Hello guyz do you have or post the latest version stock rom for Moto G4 Plus XT1643 ?
Waiting eagerly for your heads up
edit :
head to this link for flashing procedure and lock/ re-lock the bootloader on moto g4 plus :
https://forum.xda-developers.com/showpost.php?p=70383231&postcount=15
Click to expand...
Click to collapse
Hi guys
I have an XT1643 and I have downloaded the firmware mentioned below. It was a 7z compressed file with password as "lenovo-forums.ru"
"athene_oem_user_7.0_NPJ25.93-14_16_release.7z"
I couldn't find the commands for flashing this through bootloader. If someone may know a solution, could you please post the command or guide me?
thanks
shailuo said:
Hi guys
I have an XT1643 and I have downloaded the firmware mentioned below. It was a 7z compressed file with password as "lenovo-forums.ru"
"athene_oem_user_7.0_NPJ25.93-14_16_release.7z"
I couldn't find the commands for flashing this through bootloader. If someone may know a solution, could you please post the command or guide me?
thanks
Click to expand...
Click to collapse
The fastboot commands are the same as in the post you linked in your quote. Alternatively, you may refer to the instructions listed here: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369
One way to flash your stock ROM is (just expanding on the instructions mentioned previously):
1) Download the Motorola drivers and minimal adb tool from the links here: https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-xt1640-43-athene-npj25-93-t3549369 Install the drivers and tool as directed by the installers.
2)Extract the 7z ROM with your preferred decompression tool (that can handle .7z file types). The resulting folder should be about 2 GB. Copy the files (from the extracted stock ROM) to your adb folder (may be on your C:\ drive, you may have to give permission to copy).
3)Connect your device to your computer. Enable USB debugging.
3a)Once recognised by your computer, open the adb terminal and type/execute 'adb devices' without the quotes. Your device should return back its serial number if properly detected.
4)Back up all necessary data and files to your computer. Flashing a fastboot ROM may wipe your data from your device.
5)Reboot your device to bootloader mode.
5a) Re-confirm you can still detect your device in fastboot mode by executing 'fastboot devices'. Should get your serial number again.
6)Run the commands as directed in the fastboot ROM thread in the adb terminal.
6a)These commands are for relocking your bootloader:
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize (optional: will erase any customizations if ordered through motomaker)
fastboot erase clogo (optional: will erase the custom boot logo if ordered through motomaker)
fastboot oem lock
fastboot reboot
6b) If you don't wish to type all this, you may wish to download and run the scripts from this thread: https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 Ensure you copy the scripts to the adb folder, where your ROM files and the adb terminal should be. There should be 2 scripts there, one for if you want to relock your bootloader, one if you don't wish to.
getting error whilw flashing
snd team said:
First of all download the stock firmware rar file ( thanks to Arivendu for heads up) - multi platform support (windows linux etc)
https://cloud.mail.ru/public/CKF3/AWVREk6s9
Mirrors :
https://files.fm/u/hfapbktm
https://drive.google.com/open?id=0B-ReAPgYg5ISNFpaeV92V2hRaWc
https://mega.nz/#!0oV33RhI!5U51UqC4v16qTSN5ur6FAV7EOpLTXL0Pfm12n71GGwc
***** this firmware also worked for other moto g4 variants *****
extract it
open folder name : athene_oem_user_7.0_NPJ25.93-11_12_release
under the folder their is a folder name "Windows"
copy files from "windows" folder to root folder
and use below command to re-lock bootloader and flash your phone with latest version of stock 7.0 (tested on xt1643)
SHIFT + Mouse right click >>> open command window here
and enter this commands one by one
Code:
fastboot oem lock begin
fastboot oem lock begin
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem lock
Or download the oem unlock and flash mobile.zip (833.6 KB) from atatchment and place the files in root dir where you extracted the firmware
and run the OEM lock.bat file for automation
if the device not reboot after firmware flash run this command at the end :
Code:
fastboot reboot
Click to expand...
Click to collapse
log:
Fastboot device is ready
There are 1 device(s) connected: ZY2237XWMH
Trying to flash device ZY2237XWMH
Starting flashing device ZY2237XWMH...
Flashing partition table ...
Executing ".\Windows\fastboot.exe -s ZY2237XWMH flash partition gpt.bin"
target max-download-size: 512MB
sending 'partition' (32 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.048s
All devices are flashed
Press any key to continue .
Iam getting same error even while flshing without bootloader and GPT. (Iam trying downgrade from 7.1.2 to stock 7.0)
please help me with this
Udaya.kr said:
log:
Fastboot device is ready
There are 1 device(s) connected: ZY2237XWMH
Trying to flash device ZY2237XWMH
Starting flashing device ZY2237XWMH...
Flashing partition table ...
Executing ".\Windows\fastboot.exe -s ZY2237XWMH flash partition gpt.bin"
target max-download-size: 512MB
sending 'partition' (32 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) Security version downgrade
(bootloader) Image primary_gpt failed validation
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.048s
All devices are flashed
Press any key to continue .
please help me with this
Click to expand...
Click to collapse
What firmware did you have previously on your device, and are you trying to relock your bootloader? The firmware linked here is quite old (November 2016 security patch), and the warning you're getting suggests you have newer firmware on your device.
If you're on the June update, do not flash this firmware.
echo92 said:
What firmware did you have previously on your device, and are you trying to relock your bootloader? The firmware linked here is quite old (November 2016 security patch), and the warning you're getting suggests you have newer firmware on your device.
If you're on the June update, do not flash this firmware.
Click to expand...
Click to collapse
Successfully flashed june firmware and re locked bootloader. thank you for your help.
Udaya.kr said:
Successfully flashed june firmware and re locked bootloader. thank you for your help.
Click to expand...
Click to collapse
Can you please share the link for june fastboot rom for XT1643?
My XT1625 has an unlocked bootloader and TWRP installed. Today I got a notification that the Sept security patch was available so I downloaded it and tried to install. I was paying attention until I noticed it booted back into TWRP and does it everytime so I guess accepting and installing that patch was a no-no. I got it to boot into Android from instructions in another post.
Can I locate the patch in TWRP and flash it from there? Btw, I did notice that the patch was only 49MB so it clearly wasn't the entire Nougat ROM.
lmacmil said:
My XT1625 has an unlocked bootloader and TWRP installed. Today I got a notification that the Sept security patch was available so I downloaded it and tried to install. I was paying attention until I noticed it booted back into TWRP and does it everytime so I guess accepting and installing that patch was a no-no. I got it to boot into Android from instructions in another post.
Can I locate the patch in TWRP and flash it from there? Btw, I did notice that the patch was only 49MB so it clearly wasn't the entire Nougat ROM.
Click to expand...
Click to collapse
You cannot flash an official OTA update. You need to be on official recovery for this. Have a look at here, same question https://forum.xda-developers.com/moto-g4-plus/help/luck-moto-g4-plus-flashable-logo-bin-t3701652
For update its advisable to use the full stock rom to be flashed with fastboot like this one https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138
Please use always search function as this happens every week a few times and same question is answered already enough.
Also worth having a look here https://forum.xda-developers.com/moto-g4-plus/help/help-thread-question-noob-friendly-t3526598 and also ask here.
strongst said:
You cannot flash an official OTA update. You need to be on official recovery for this. Have a look at here, same question https://forum.xda-developers.com/moto-g4-plus/help/luck-moto-g4-plus-flashable-logo-bin-t3701652
I saw that other post and edited mine to acknowledge that I saw the fix (see last sentence of 1st paragraph.)
For update its advisable to use the full stock rom to be flashed with fastboot like this one https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 Thanks. I probably won't go to that much trouble.
Please use always search function as this happens every week a few times and same question is answered already enough. I generally do.
Also worth having a look here https://forum.xda-developers.com/moto-g4-plus/help/help-thread-question-noob-friendly-t3526598 and also ask here.
Click to expand...
Click to collapse
I rebooted and it went back to TWRP again. I will ask how to fix this in the help thread.
lmacmil said:
I rebooted and it went back to TWRP again. Will I have to boot to fastboot mode and select factory mode every time now or is there a fix that will boot into Android instead of TWRP?
Click to expand...
Click to collapse
Try to run these commands from fastboot..
fastboot oem fb_mode_set
fastboot oem fb_mode_clear
____Mdd said:
Try to run these commands from fastboot..
fastboot oem fb_mode_set
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
I will give it a try.
lmacmil said:
I will give it a try.
Click to expand...
Click to collapse
use the following script :
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
____Mdd said:
Try to run these commands from fastboot..
fastboot oem fb_mode_set
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
Got error messages:
D:\Computer\Minimal ADB and Fastboot>fastboot oem fb_mode_set
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
OKAY [ 0.005s]
finished. total time: 0.008s
siddhesh9146 said:
use the following script :
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Is this going to wipe my system like a factory reset? If so, can I just restore the backup I made after I installed TWRP initially? Or just do a factory reset?
@lmacmil ignore it, use both commands then try to boot.
---------- Post added at 12:41 AM ---------- Previous post was at 12:34 AM ----------
lmacmil said:
Is this going to wipe my system like a factory reset? If so, can I just restore the backup I made after I installed TWRP initially? Or just do a factory reset?
Click to expand...
Click to collapse
Don't use it if you are thinking to just run script and not to flash... since it has "erase modemst1 & 2" it will erase modem, but will not flash fsg/modem, also "erase data" will wipe everything on phone.. this can put you in trouble..
Instead of doing this, as strongst said in his post, flash complete firmware, see the link for september's update he gave in his post.
Then move everything from your phone to PC (images / video/ etc)
Then flash firmware...
____Mdd said:
@lmacmil ignore it, use both commands then try to boot.
---------- Post added at 12:41 AM ---------- Previous post was at 12:34 AM ----------
Don't use it if you are thinking to just run script and not to flash... since it has "erase modemst1 & 2" it will erase modem, but will not flash fsg/modem, also "erase data" will wipe everything on phone.. this can put you in trouble..
Instead of doing this, as strongst said in his post, flash complete firmware, see the link for september's update he gave in his post.
Then move everything from your phone to PC (images / video/ etc)
Then flash firmware...
Click to expand...
Click to collapse
Still boots to TWRP. Maybe this is the time to move to LineageOS 14.1. I was going to wait until 15 was stable but if I'm going to lose everything, I might as well get more up to date.
This seems to have killed my cell signal too. Just noticed that last time I booted to Android.
lmacmil said:
Still boots to TWRP. Maybe this is the time to move to LineageOS 14.1. I was going to wait until 15 was stable but if I'm going to lose everything, I might as well get more up to date.
This seems to have killed my cell signal too. Just noticed that last time I booted to Android.
Click to expand...
Click to collapse
Did you flash complete stock ROM ?
Move your files to External Storage then try it.
____Mdd said:
Did you flash complete stock ROM ?
Move your files to External Storage then try it.
Click to expand...
Click to collapse
I decided since I would have to reinstall all my apps anyway that I would flash LineageOS 14.1, which I did. I did the appropriate wipes (data, system, cache, Dalvik/ART), then flashed the latest nightly and Gapps. It was successful but it's still booting into TWRP and I still have no cell service. I thought that a complete wipe and installation of new ROM would correct those issues but it did not. And since it didn't, I'm not confident that flashing the stock ROM would either but unless there's something else to try, I will do it. One concern I have is I have a plain G4 and the ROM is for the G4 Plus. My build was NPJ25.93-14.5 and I think the Plus build is NPJS... Not sure if that makes a difference.
Maybe I should restore my original Nandroid backup first and see if that fixes things.
lmacmil said:
. My build was NPJ25.93-14.5 and I think the Plus build is NPJS... Not sure if that makes a difference.
Click to expand...
Click to collapse
NPJ25.93-14.5 was for Amazon variant if i am not wrong.
I don't know but in past that two commands [fb_mode_set and fb_mode_clear] worked fine for this problem.
Try this thing, [reboot to bootloader and flash TWRP but with fb_mode_ commands]
- fastboot oem fb_mode_set
- fastboot flash recovery twrp(name).img
- fastboot oem fb_mode_clear
If this too doesn't work, then you have to find correct firmware for your phone and flash it..
EDIT: for easiness to find correct firmware, restore backup, then see "about phone" for build number, it will help to find firmware..
EDIT-2:
I found 2 firmware of version you said,
But one says Amazon and another doesn't. You have Nandroid, restore and check your phone build..
Then go for following one correctly..
AMAZON : Click here
Non-AMAZON : Click here
____Mdd said:
NPJ25.93-14.5 was for Amazon variant if i am not wrong.
I don't know but in past that two commands [fb_mode_set and fb_mode_clear] worked fine for this problem.
Try this thing, [reboot to bootloader and flash TWRP but with fb_mode_ commands]
- fastboot oem fb_mode_set
- fastboot flash recovery twrp(name).img
- fastboot oem fb_mode_clear
If this too doesn't work, then you have to find correct firmware for your phone and flash it..
EDIT: for easiness to find correct firmware, restore backup, then see "about phone" for build number, it will help to find firmware..
EDIT-2:
I found 2 firmware of version you said,
But one says Amazon and another doesn't. You have Nandroid, restore and check your phone build..
Then go for following one correctly..
AMAZON : Click here
Non-AMAZON : Click here
Click to expand...
Click to collapse
Mine was the non-Amazon version. See attachment. The software channel was "retus" and the baseband version also said "ATHENE_RETUSA_CUST" The Amazon version software channel is amz.
I was able to get the bootloader unlock code from Motorola and they don't allow the Amazon versions to be unlocked.
I'll try your suggestions. Thanks for your continued help.
____Mdd said:
NPJ25.93-14.5 was for Amazon variant if i am not wrong.
I don't know but in past that two commands [fb_mode_set and fb_mode_clear] worked fine for this problem.
Try this thing, [reboot to bootloader and flash TWRP but with fb_mode_ commands]
- fastboot oem fb_mode_set
- fastboot flash recovery twrp(name).img
- fastboot oem fb_mode_clear
Click to expand...
Click to collapse
This is what I got:
D:\Computer\Minimal ADB and Fastboot>fastboot devices
ZY223N5GLF fastboot
D:\Computer\Minimal ADB and Fastboot>fastboot oem fb_mode_set
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
OKAY [ -0.000s]
finished. total time: -0.000s
D:\Computer\Minimal ADB and Fastboot>fastboot flash recovery twrp.img
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (12530 KB)...
OKAY [ 0.402s]
writing 'recovery'...
(bootloader) Image not signed or corrupt
OKAY [ 0.190s]
finished. total time: 0.595s
D:\Computer\Minimal ADB and Fastboot>fastboot oem fb_mode_clear
(bootloader) slot-count: not found
(bootloader) slot-suffixes: not found
(bootloader) slot-suffixes: not found
...
OKAY [ 0.001s]
finished. total time: 0.001s
=================================
Not sure why I'm getting the bootloader error messages but I backed up just the bootloader recently so am going to restore that and see what happens.
@lmacmil that "not found" is ignorable, just check you get "OKAY" after one command ends... Since GPT and Bootloader commands got "OKAY" they are flashed successfully..... Go for complete firmware...
____Mdd said:
@lmacmil that "not found" is ignorable, just check you get "OKAY" after one command ends... Since GPT and Bootloader commands got "OKAY" they are flashed successfully..... Go for complete firmware...
Click to expand...
Click to collapse
I guess I need to bite the bullet and do this. It will install stock recovery and erase TWRP, right? If that's the case, and I don't relock the bootloader, will I be able to accept the OTA update? Or does an unlocked bootloader prevent OTA updates?
Last question: I just extract the firmware .zip file to the same folder where fastboot and adb reside? Then type the commands one by one (or copy/paste from the script shown in the thread about flashing stock firmware.)
Thanks again.
lmacmil said:
I guess I need to bite the bullet and do this. It will install stock recovery and erase TWRP, right?
Click to expand...
Click to collapse
Yes, it will install stock recovery, you will have to install TWRP again.
If that's the case, and I don't relock the bootloader, will I be able to accept the OTA update? Or does an unlocked bootloader prevent OTA updates?
Click to expand...
Click to collapse
It will be fine, You will have successful installation with unlocked bootloader too, no need to lock back..
Last question: I just extract the firmware .zip file to the same folder where fastboot and adb reside? Then type the commands one by one (or copy/paste from the script shown in the thread about flashing stock firmware.)
Thanks again.
Click to expand...
Click to collapse
You did right, that's why there is "OKAY" when command end, see your own post where you asked for "not found" error... Keep Going..
____Mdd said:
Yes, it will install stock recovery, you will have to install TWRP again.
You did right, that's why there is "OKAY" when command end, see your own post where you asked for "not found" error... Keep Going..
Click to expand...
Click to collapse
Success! Just flashed the stock Nougat ROM and as soon as it booted up, I let it download and install the Sept security patch. I am now on NPJ25.93-14.7.
Thanks again for all your help.
Lee
I have unlocked bootloader. Now I need to unlock the tethering. Apparently it is done by editing the build prop. Instructions will be appreciated.
BTW I had rooted the phone with the Tool kit, the camera had stopped working, so I reinstalled the OEM ROM November update, now the root and TWRP are gone and the camera is working again..
TIA
goodjuju said:
I have unlocked bootloader. Now I need to unlock the tethering. Apparently it is done by editing the build prop. Instructions will be appreciated.
BTW I had rooted the phone with the Tool kit, the camera had stopped working, so I reinstalled the OEM ROM November update, now the root and TWRP are gone and the camera is working again..
TIA
Click to expand...
Click to collapse
Tethering is down to your carrier, some allow it others block it, the phone itself allows tethering natively, or have I misunderstood your question.
It depends entirely on how the carrier is restricting tethering... if they doing by MAC/traffic analysis there is nothing you can do. If they are doing it by just the provisioning flag, you can edit your build.prop and change "net.tethering.noprovisioning" to true. Then may need to change make a change from a su terminal shell, "settings put global tether_dun_required 0". But again, this all depends on how your carrier is blocking tethering.
Thanks Acejavelin. That's exactly the info I was looking for.
I don't see a "net.tethering.noprovisioning" line in the build prop. Should I insert the line? Any specific location in the build prop? Should the line read "net.tethering.noprovisioning=true"
TIA
goodjuju said:
Thanks Acejavelin. That's exactly the info I was looking for.
I don't see a "net.tethering.noprovisioning" line in the build prop. Should I insert the line? Any specific location in the build prop? Should the line read "net.tethering.noprovisioning=true"
TIA
Click to expand...
Click to collapse
Yes, just add it at the bottom, the order isnt important.
Got the tethering to work. But it reverted back when I tried to relock the bootloader and installed the stock ROM. Checked the build.prop sure enough the added line vanished. Is there a way to make it stick?
goodjuju said:
Got the tethering to work. But it reverted back when I tried to relock the bootloader and installed the stock ROM. Checked the build.prop sure enough the added line vanished. Is there a way to make it stick?
Click to expand...
Click to collapse
You mean to relock with a modified system file? No. Even if you found a way to lock the bootloader with a modified file, it would then fail to boot due to other security measures in Linux.
Thanks Ace. Not savvy enough to understand what you mean. But this is what I did -
1. Use the following relock commands -
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
2. Then reflashed the stock ROM using -
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Both processes are from other posts here in XDA.
goodjuju said:
Thanks Ace. Not savvy enough to understand what you mean. But this is what I did -
1. Use the following relock commands -
fastboot oem lock
fastboot oem lock
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash boot boot.img
fastboot oem lock
2. Then reflashed the stock ROM using -
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Both processes are from other posts here in XDA.
Click to expand...
Click to collapse
The process of writing system sparce chunks over-write your changes... You can't have a modified build.prop and a locked bootloader. I don't know how to be more clear.
Thanks again Ace! Now I got it. Only reason to relock was to get the OTA updates. I can live without it. I have a question - Since the sparce chuncks overwrite the changes wouldn't installing updates via TWRP or fastboot also overwrite the build.prop changes? Sorry to be a pain but I am learning.
goodjuju said:
Thanks again Ace! Now I got it. Only reason to relock was to get the OTA updates. I can live without it. I have a question - Since the sparce chuncks overwrite the changes wouldn't installing updates via TWRP or fastboot also overwrite the build.prop changes? Sorry to be a pain but I am learning.
Click to expand...
Click to collapse
Having an unlocked bootloader only does not stop OTA updates, but the OTA scrupt makes several checks and I know one of them if build.prop file, the OTA will fail even if that is the only change you have made.
OTA's can only be installed in a PURELY stock device, stock recovery and stock /system partition, other than that the bootloader locked/unlocked status is not relevant. Your only real choice here is to return to stock, accept the OTA, then make the change again.
acejavelin said:
Having an unlocked bootloader only does not stop OTA updates, but the OTA scrupt makes several checks and I know one of them if build.prop file, the OTA will fail even if that is the only change you have made.
OTA's can only be installed in a PURELY stock device, stock recovery and stock /system partition, other than that the bootloader locked/unlocked status is not relevant. Your only real choice here is to return to stock, accept the OTA, then make the change again.
Click to expand...
Click to collapse
Thanks again Ace! I think instead of returning to stock every time for OTA update it will be simpler to do ZIP updates when they are made available here at XDA. Having the modified build.prop is more useful to me.
Hi, Adding this line will work for at&t blocker in G5S plus ?
Thx in advance.
alejomj said:
Hi, Adding this line will work for at&t blocker in G5S plus ?
Thx in advance.
Click to expand...
Click to collapse
What do you mean "AT&T blocker"? Don't most AT&T plans include tethering?
And will it work? Maybe, depends how they are enforcing it.
I have buyed a straight talk sim, it has 3 options att/virgin/tmobile and i choose att but when i went to use tehering it said "account not setup for mobile hotspot". But problem solved rooting the g5s plus and editing the file system/build.prop it works perfect. Thx a lot
Someone managed to get the RSD Secure link for the FASTBOOT files of the final Oreo 8.1 release for RETAIL Moto G5/cedric.
With these files you'll be able to update to official oreo, relock your bootloader or simply go back to stock.
Using the guide I'll write below you'll be able to flash it from Linux, Windows and MacOS.
The new firmware is named OPP28.85-16 and Blur Version listed within the firmware package is:
Code:
Blur_Version.28.41.15.cedric.retail.en.US
whereas the OTA file for the corresponding Firmware lists it as:
Code:
Blur_Version.25.361.10.cedric.retail.en.US
I dont know which is "correct", but anyways, this should not alter your results when flashing this with fastboot.
DOWNLOAD
Gdrive: https://drive.google.com/file/d/1gNB7vNM8xH5ueTPKh5Qwev87gJpSpyyK/view?usp=sharing
RSD Secure: https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
FLASHING IT
If your seeing this post long after Setember 2018 it may be the case you have updated your firmware past this one and got a different bootloader version, in that case, make sure to check you bootloader version is BELOW B8.31. Flashing bootloader of equal or minor version will hardbrick your device
UPDATING FROM PREVIOUS ANDROID VERSION
1. If you're on Windows/Mac, download motorola USB drivers here. (You shouldn't need these on Linux)
2. Download Android Platform Tools (ADB & Fastboot ) for Windows/Mac/ Linux here (if you're on Linux, get these from your distro's repo instead).
3. Extract the platform tools somewhere
4. Extract the firmware's ZIP too (I recommend extracting it to the same directory as platform tools, this will make your life easier).
5.Open a command prompt/terminal where you extracted platform tools (To do that on windows, Hold SHIFT + right Click some blank area within platform-tools directory, then click "Open Command Prompt Here".
6. Reboot into fastboot (power off and connect USB while holding Vol Down) and Execute the following commands
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
7. Reboot your phone by typing fastboot reboot or by selecting the "START" option in phone's screen and then pressing the power button
PS: Do not execute commands related to erasing the modemst1 and modemst2 partitions. This has been related to people losing their IMEI's.
RELOCKING YOUR BOOTLOADER
edit
Seems like my instructions on how to relock didn't work, but I want to thank Andrej_SK, who managed to do it and posted instructions on how to do it. Just remember that you should Not flash bootloader if you're already on B8.31 or past it. Flashing gpt.bin can also hardbrick your phone and there have been reports of it happening here on XDA and on telegram. I personally didn't flash it when moving from NPPS25.137-93-2-5 and had no problem at all, and I think you shouldn't too, unless you know you absolutely need it (which I think is unlikely, since the partition scheme looks the same on both nougat and Oreo)
Andrej_SK said:
I was able to lock my bootloader with this firmware (but I wasn't satisfied with official Oreo at all so I unlocked it again and downgraded to Nougat).
Try this (on your own risk only): input "fastboot oem lock" twice (first time for starting the whole process of locking, second time for confirmation). Then, execute commands below, one by one
Code:
fastboot flash oem oem.img
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
Then, input "fastboot oem lock" for the last time. Your phone should immediately reboot, as mine did. If there will be problem with booting into OS, just reflash the whole system with commands below:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img (do not flash this if you're on B8.31 or further, so as not to hardbrick the device)
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
DOWNGRADING FROM A FIRMWARE NEWER THAN OPP28.85-16
1. Follow steps one 1 up to five described in the first section UPDATING FROM PREVIOUS ANDROID VERSION
2. Omit these lines from step 6:
Code:
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
Notice that omitting these two lines is VERY IMPORTANT if you're downgrading, otherwise you'll hardbrick your device.
3.7. Reboot your phone by typing fastboot reboot or by selecting the "START" option in phone's screen and then pressing the power button
That's it. If you liked, press thanks
Ps: some of my friends have reported phone is rebooting right after flashing sparsechunk.5.
phone will apparently boot normally and show the setup wizard screen, but in actuality there will be missing files on the system partition.
in that case, reboot into fastboot and finish flashing the system normally, then boot your phone
Thank you very much! Excuse me if I'm wrong but with this file it's safe to install Oreo from stock Nuggat right? I just need to unlock the bootloader and flash normally?
Thank, you to provide the firmware.
On another thread (https://forum.xda-developers.com/g5...eo-8-1-0-release-opp28-t3849273/post77771786) you wrote it's necessary to be on firmware NPPS25.137-93-2-5. Maybe you forgot to mention that!?
I believe the two threads are separate updates. One being OTA and this thread being fastboot firmware. I was wondering if this would work on my Moto g5 xt1670 (137-93-8)?
Woooow
Thanks
Ahasverus said:
Thank you very much! Excuse me if I'm wrong but with this file it's safe to install Oreo from stock Nuggat right? I just need to unlock the bootloader and flash normally?
Click to expand...
Click to collapse
no need to unlock BL to flash this. If you're on stock Nougat just make sure you're on NPPS25.137-93-2-5 (July security patch), then grab the ota here and sideload or flash it using the stock recovery
if you're not on NPPS25.137-93-2-5 then you'll need to flash it before flashing the ota.
AndroidenKalle said:
Thank, you to provide the firmware.
On another thread (https://forum.xda-developers.com/g5...eo-8-1-0-release-opp28-t3849273/post77771786) you wrote it's necessary to be on firmware NPPS25.137-93-2-5. Maybe you forgot to mention that!?
Click to expand...
Click to collapse
if you're going to install it from fastboot there's no need to be on NPPS25.137-93-2-5
TWRP v3.2.3.0 for Cedric: works
Magisk v17.1: works (don't use safetynet)
Thank you very much for this! I've been using the soak Oreo and could not be happier until this thread, time for the final Oreo for my beloved G5.
Blur_Version.28.41.15 for OPP28.85-16 is correct!
I'm on the 2nd soak test update OPP28.85-13 and tried the OTA update from your other post. This failed due to wrong version (E3002) since it expects the last NPPS25.137-93-2-5 version.
How can I update from OPP28.85-13 to the latest OPP28.85-16 via fastboot flash without losing my current data and settings?
Can I flash without "erase userdata"?
The thing I don't like in your instructions is lack of DDR errase command.
Please explain your point. Also please compare with flashfile.xml from Oreo firmware.
PsyClip-R said:
The thing I don't like in your instructions is lack of DDR errase command.
Please explain your point. Also please compare with flashfile.xml from Oreo firmware.
Click to expand...
Click to collapse
So "fastboot erase ddr" command should be included while flashing stock Oreo through fastboot? What does that command do?
I am on amzin software channel and my build number is NPPS25.137-93-14 (July Security Patch). Will this fastboot method work for me?
Hello,
the bootloader locking seems not to be working. At the last "fastboot oem lock" it says that it needs a signed boot.img. Has anyone else experienced this issue ?
achintyakv said:
I am on amzin software channel and my build number is NPPS25.137-93-14 (July Security Patch). Will this fastboot method work for me?
Click to expand...
Click to collapse
I don't think so since this is definitely a retail version.
BUILD REQUEST INFO:
SW Version: cedric-user 8.1.0 OPP28.85-16 0400 release-keysM8937_22.29.02.70R
MBM Version: B8.31
Modem Version: M8937_22.29.02.70R
FSG Version: FSG-8937-02.65.33
Build Fingerprint: motorola/cedric/cedric:8.1.0/OPP28.85-16/0400:user/release-keys
CQATest App Version: 6.0.6
VERSION INFO FOUND UNDER 'ABOUT PHONE' SCREEN:
System Version: 28.41.15.cedric.retail.en.US
Model Number: Moto G (5)
Android Version: 8.1.0
Baseband Version: M8937_22.29.02.70R
Build Id: OPP28.85-16
SW Display Build ID: OPP28.85-16
Build Date: Wed Sep 5 09:46:09 CDT 2018
OTHER MISC VERSION INFO:
Subsidy Lock Config: slcf_rev_d_default_v1.0.nvm
Regulatory Info (eLabel): regulatory_info_default.png
Blur Version: Blur_Version.28.41.15.cedric.retail.en.US
Version when read from CPV: cedric-user 8.1.0 OPP28.85-16 0400 release-keys
slsmaster said:
Hello,
the bootloader locking seems not to be working. At the last "fastboot oem lock" it says that it needs a signed boot.img. Has anyone else experienced this issue ?
Click to expand...
Click to collapse
I was able to lock my bootloader with this firmware (but I wasn't satisfied with official Oreo at all so I unlocked it again and downgraded to Nougat).
Try this (on your own risk only): input "fastboot oem lock" twice (first time for starting the whole process of locking, second time for confirmation). Then, execute commands below, one by one
Code:
fastboot flash oem oem.img
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
Then, input "fastboot oem lock" for the last time. Your phone should immediately reboot, as mine did. If there will be problem with booting into OS, just reflash the whole system with commands below:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Edit: as you can see at the screenshots in the attachment, I'm able to lock bootloader with this firmware. First, I reflashed the whole Oreo firmware, then rebooted into bootloader using "fastboot reboot-bootloader" command and at last I tried to relock bootloader which was (once again) successful.
Phone specs: XT1676 (3/16), DualSIM, reteu soft. channel
Andrej_SK said:
I was able to lock my bootloader with this firmware (but I wasn't satisfied with official Oreo at all so I unlocked it again and downgraded to Nougat).
......
......
Click to expand...
Click to collapse
Thank you very much, worked like a charm.
need cedric amzin oreo update before was on soak oreo ,after upate this phone stay in fastboot mode
PsyClip-R said:
The thing I don't like in your instructions is lack of DDR errase command.
Please explain your point. Also please compare with flashfile.xml from Oreo firmware.
Click to expand...
Click to collapse
never heard about this command before, I have never used it ever and I flashed this firmware without any problem so far
Andrej_SK said:
So "fastboot erase ddr" command should be included while flashing stock Oreo through fastboot? What does that command do?
Click to expand...
Click to collapse
As I said above, I and other people I know who flashed this didn't have any problem by flashing without typing "fastboot erase DDR" and in fact I'm curious to know what does this command do.
JoeDoe0 said:
Blur_Version.28.41.15 for OPP28.85-16 is correct!
I'm on the 2nd soak test update OPP28.85-13 and tried the OTA update from your other post. This failed due to wrong version (E3002) since it expects the last NPPS25.137-93-2-5 version.
How can I update from OPP28.85-13 to the latest OPP28.85-16 via fastboot flash without losing my current data and settings?
Can I flash without "erase userdata"?
Click to expand...
Click to collapse
I think it's very unlikely anyone has this OPP25.85-16, otherwise it would've already surfaced somewhere.
(edit)
seems like I was wrong, I just reflashed the firmware and managed to keep my data by not using fastboot erase user data.
(/edit)
regarding the "fastboot erase user data" it doesn't matter if you use it or not, since once you flash all sparse chunks you'll lose your data partition anyways.
what I'd suggest you to do is
1.backup your data partition using twrp and your internal storage to a pc/sdcard/whatever (twrp doesn't backup your internal storage)
2. flash the firmware just as described on the main thread
3 fastboot boot twrp.img PRIOR to the first boot
4. restore your data
5. connect your phone to USB cable with twrp still open and copy back your internal storage through TWRP's MTP(or use twrp's file manager/aroma FM in case you backed internal storage to sd card)
5. boot your phone.
I never tried backing up internal storage but I already did this when fastbooting and managed to keep my data (settings, apps, etc) .
I just advice you to remove any screen lock prior to backing up your data since your previous pattern/pin/password generally won't work after restoring a twrp backup, but in case you forget it use twrp and go to /data/system and delete locksettings.db and your
lock screen protection will be gone
achintyakv said:
I am on amzin software channel and my build number is NPPS25.137-93-14 (July Security Patch). Will this fastboot method work for me?
Click to expand...
Click to collapse
I don't know, this could brick your phone, but I'm not sure
tapan8914 said:
need cedric amzin oreo update before was on soak oreo ,after upate this phone stay in fastboot mode
Click to expand...
Click to collapse
as I said idk what'd happen if someone did this. the best you can do now is to find some old amzin firmware and fastboot it (do not flash gpt.bin or bootloader.bin, so as not to hard brick your device)
Andrej_SK said:
I was able to lock my bootloader with this firmware (but I wasn't satisfied with official Oreo at all so I unlocked it again and downgraded to Nougat).
Try this (on your own risk only): input "fastboot oem lock" twice (first time for starting the whole process of locking, second time for confirmation). Then, execute commands below, one by one
Code:
fastboot flash oem oem.img
fastboot flash boot boot.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
Then, input "fastboot oem lock" for the last time. Your phone should immediately reboot, as mine did. If there will be problem with booting into OS, just reflash the whole system with commands below:
Code:
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash dsp adspso.bin
fastboot flash oem oem.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash modem NON-HLOS.bin
fastboot erase modemst1
fastboot erase modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot erase userdata
fastboot erase customize
fastboot erase clogo
fastboot oem fb_mode_clear
fastboot reboot
Edit: as you can see at the screenshots in the attachment, I'm able to lock bootloader with this firmware. First, I reflashed the whole Oreo firmware, then rebooted into bootloader using "fastboot reboot-bootloader" command and at last I tried to relock bootloader which was (once again) successful.
Phone specs: XT1676 (3/16), DualSIM, reteu soft. channel
Click to expand...
Click to collapse
many a thanks, I'll put this on the main thread
Currently on OPP28.85-3
Currect me if I'm wrong, but by what I have been reading,
I cant go from OPP28.85-3 to OPP28.85-16
What I've read, I can't be on bootloader B8.31 (which I am) and since this isn't a "full system" image, just a "patch" for official Nougat to upgrade to offical Oreo, I need to be on Nougat.
If this is the case, could I go back to nougat through a TWRP Zip, or would this need to be done through fastboot commands. I know I need a downgraded Bootloader and I don't think ROM flashing affects anything else but /system
PLEASE correct me if I'm wrong. Just a curious guy who loves learning.