Hello, is there any way for this device to turn on automatically when I connect it to the USB?
What I mean is:
-Device powered off;
-USB connected to the device;
-Device powered on.
Can I do it with some apps? Or I need modified ROM?
Any help appreciated. Thx.
Related
I have done tons of research on this, and nothing clear is coming up.
My friend dropped her phone, shattered the screen, and the display is blank. It's a stock razr m, running the most current OTA update. She had all of her pics saved to the internal phone memory. The phone turns on, and I can hear the sounds and see the LED light blinking (stupid thing is trolling me).
USB Debugging is not enabled.
Installed motorola device manager.
The phone connected and installed a bunch of drivers.
Now it just shows up as a camera, with no file system to explore. It's blank.
We tried inserting an SD card, and the exact same thing ^^^ happened.
I have read that USB Debugging needs to be enabled to explore the phone's internal storage. I know that I have to do this with my Note 2 to see anything from the PC. Is there anything I can do in ADB/otherwise, like enabling Debugging to make this thing's files show up on my PC? Thank you for your help.
you don't need to have debugging on but you do need the USB type to be "MTP" not camera
Sent from my XT907 on CM10.1 using Tapatalk 4 beta
Debugging using PC?
I actually had a similar question.
I currently have the Droid RAZR M and it kept going through a bootloop. I have never rooted my phone, so I'm not sure why this happened. Anyways I tried a recovery and and hard reset and I'm still getting the same thing. Then I tried using RSD Lite to do a fastboot, but I'm not sure if I did that correctly. The Filename was VRZ_XT912_6.7.2-180_DHD-16_M4-31_1FF.xml. This failed at step 12. I was wondering if this was because USB Debugging is not enabled? Is there a way to enable it from my computer? As of now I'm stuck with this...
AP Fastboot Flash Mode (S) (Flash Failure)
0A.74
eMMC Info: Size 16G
To return to normal mode - first press power key to power down
Device is LOCKED, Status Code: 0
Battery OK
OK to Program
Connect USB
Data Cable
If someone could help me out that would be great, or point me in the direction to the right forum.
Cheers
I am trying to use my rooted galaxy s5 sm-g900f in debugging mode, and when I enable the mode it works for 5 second and than reconnects to the pc not in debugging mode. the option stays ticked but if I go back and getting in developer options again it isn't ticked. it is not a problem with the computer because it happens even when it is not physically connected with a cable.
Thank you for helping
Hello guys, I need help to root my phone. After I click on USB Debugging (on Developer options), the option turns off itself and then I can't connect with the PC. The problem is on the phone, I have updated the drivers on pc, installed Lenovo Manager but didn't work. What should I do? Thanks!
Nobody?
Nobody? I think the problem is like usb debug process crashing on android, because it turns off itself.
Hi
I have a nexus 7 2012 which was rooted, twrped and flashed to Nought. And suddenly I noticed it could not be charged when turned on. I flashed it back to stock in fastboot mode and tried with factory image as 4.1.2, 4.4 and 5.1.1. Locked the bootloader too. But it kept with same problems:
1. No charging when power is on.
2. Turn off the power and replug the cable, the battery start charging.
3. No adb connection when power is on .(No problem with the usb driver since I have anothe nexus without any problem of connection)
4. Fastboot works
5. when tried to turn on USB debugging tablet restarts automatically after a while and USB debugging is still off after restart.
6. When tried to tick/untick MTP the system restarts after a while
I believe this must have somthing to do the sw which control the USB . But I don't know how to solve this. Someone has ideas?
Thanks
Hello,
the display on my Galaxy S5 Neo got broken (dropped on the ground, the screen is black) and I need to recover my data, i.e. connect via ADB. The phone including touch is working. There is no screen lock, developer options are enabled, just no USB debugging I can connect a USB keyboard using an OTG cable.
Could somebody help me please, providing the exact key sequence or video to enable the USB debugging. My phone has the latest official firmware from Samsung installed (Android 6 ?).
Thanks a lot
Petr