Database Users

How to Root Honor 8 FRD-L09 (NOUGAT 7.0 EMUI 5.0 With Bluetooth, NFC, system apps)

I had been struggeling myself alot with this but after looking everywhere I collected pieces of information all over XDA and fixed it.
Since all the information is scatterd around everywhere I thought it would be good to make a complete piece here.
I have only tested this with the device: (Honor 8 FRD-L09)
If anyone got this working on other devices please leave a comment so I can add it to this list for other people to see.
So here it goes:
1- First you need to be have an unlocked bootloader.
2- Flash via fastboot the new TWRP with decryption support Here
3- Download two files:
a- update.zip Link (1.5G)
b- update_data_full_hw_eu.zip Link(1.05G)
4- Flash these two files using TWRP (a then b)
5- Reflash TWRP (using fastboot)
Finally, to root, you need to flash this patched prerooted boot.img B378 root boot image (from SD card): Link(15.8MB)
You can do this with OldDroids TWRP or with surdu_petrus TWRP: Link(36.2MB) and Link(24,2MB)
1- Flash OldDroids or surdu_petrus TWRP
2- Select "Install" -> Click "Images" -> Go to External SD and select your rooted_b378_boot.img
3- When it asks where to install click boot.
4- Then reboot and install phh's superuser from the playstore (its the only superuser that works for now)
5- Install JRummy's Busybox Installer and install to /vendor/xbin
Done!
Note: To get AdAway working, go to Preferences, then scroll down to "Target hosts file" and set it to "custom target". Then set Custom target to "/vendor/etc/hosts"
If you have any questions feel free to send me a message I had much trouble with it too.
Credits to: morpheus302, Atarii, OldDroid, surdu_petrus and phhusson

thierrybla said:
I had been struggeling myself alot with this but after looking everywhere I collected pieces of information all over XDA and fixed it.
Since all the information is scatterd around everywhere I thought it would be good to make a complete piece here.
So here it goes:
1- First you need to be have an unlocked bootloader.
2- Flash via fastboot the new TWRP with decryption support Here
3- Download two files:
a- update.zip Link (1.5G)
b- update_data_full_hw_eu.zip Link(1.05G)
4- Flash these two files using TWRP (a then b)
5- Reflash TWRP (using fastboot)
Finally, to root, you need to flash this patched prerooted boot.img B378 root boot image (from SD card): Link(15.8MB)
You can do this only with OldDroids TWRP: Link(36.2MB)
1- Flash OldDroids TWRP
2- Select "Install" -> Click "Images" -> Go to External SD and select your rooted_b378_boot.img
3- When it asks where to install click boot.
4- Then reboot and install phh's superuser from the playstore (its the only superuser that works for now)
5- Install JRummy's Busybox Installer and install to /vendor/xbin
Done!
Note: To get AdAway working, go to Preferences, then scroll down to "Target hosts file" and set it to "custom target". Then set Custom target to "/vendor/etc/hosts"
If you have any questions feel free to send me a message I had much trouble with it too.
Credits to: morpheus302, Atarii, OldDroid and phhusson
Click to expand...
Click to collapse
Hello!
Can you please specify for which variants of the FRD is this valid?
Thank you
RM

omartins said:
Hello!
Can you please specify for which variants of the FRD is this valid?
Thank you
RM
Click to expand...
Click to collapse
I have only tested it on the FRD-L09
I can't say for sure if it works on the others, I'm sorry.
If you got this working on a different device please let me know.

Quick Question: I have installed normal TWRP 3.1.0.0, every time i want to install the newest SuperSu Beta, it resets TWRP completely. Is your guide also going to work for me, or do i have another problem?

david320te said:
Quick Question: I have installed normal TWRP 3.1.0.0, every time i want to install the newest SuperSu Beta, it resets TWRP completely. Is your guide also going to work for me, or do i have another problem?
Click to expand...
Click to collapse
Yes SuperSU doesn't work as far as I know you need Phh Superuser.
But if you already have nougat 7.0 B380 you can just begin at the boot.img installing step and it should work for you too.
Good luck!

Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP

david320te said:
Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP
Click to expand...
Click to collapse
The difference is that the TWRP that I linked can flash .img 's
wich you need to flash the boot.img
Try to get back in TWRP and start at step 1 just do the whole guide then your phone should boot again

david320te said:
Ok, but you linked "twrp-3.1.0.0-eva", i've installed "twrp-3.1.0.0-frp" - do you know, where the difference is?
Edit:
Well, something has gone wrong. Doesn't boot...stays on that screen forever...i tried restoring the backup i took while the system was read only with TWRP
Click to expand...
Click to collapse
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Q: Why does booting take so long?
A: Because of the decryption process which need to finish
its work before twrp tries to access /data partition.
Click to expand...
Click to collapse
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.

N01tra said:
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.
Click to expand...
Click to collapse
I can boot into TWRP no Problem, as i said, i restored the backed up image (somehow after a factory reset, the stock apps as well as the keyboard was gone, i could not type in my wifi password) in TWRP, but it sat for about 10 Minutes on that screen when i turned the phone off.
I do not have very good Broadband, so i will start at the first step, installing the update files, linked in the first post.

N01tra said:
The "twrp-3.1.0.0-eva" is for the Huawei P9, the "twrp-3.1.0.0-frD" is for the Honor 8.
And first boot after TWRP install can take longer that usual:
Try flashing the pre-rooted boot.img via fastboot command line.
Worked for me.
Code:
Copy the pre-rooted boot.img to the adb/fastboot directory
(have usb debugging enabled etc etc, connect phone to computer)
Start a cmd box
adb reboot fastboot
fastboot flash boot rooted_b378_boot.img
reboot device.
Click to expand...
Click to collapse
You are right it is for P9 but it worked for me regardless though :fingers-crossed:

david320te said:
I can boot into TWRP no Problem, as i said, i restored the backed up image (somehow after a factory reset, the stock apps as well as the keyboard was gone, i could not type in my wifi password) in TWRP, but it sat for about 10 Minutes on that screen when i turned the phone off.
I do not have very good Broadband, so i will start at the first step, installing the update files, linked in the first post.
Click to expand...
Click to collapse
Yeah.. A FactoryReset seems to be a big "no no" after flashting TWRP as it will delete the keyboard and other stuff.
I was in that situation and restored a TWRP backup which got me back to booting into android, but somehow the Camera and LED (flashlight) didn't work.
Restoring an older and a complete backup did not help. Flashing the Update files did not help.
Eventually I ended up following the Honor 8 Rollback steps; going from Emui 5 (android 7) back to Emui 4.1 (android 6).
That also means the Bootloader is locked again, so you'll have to re-unlock it again (if you still have the code, you can use it again).
My steps after the Rollback:
- OTA updated back to Emui 5,
- Factory reset (BEFORE installing TWRP) and reboot.
- Enabled USB debugging,
- Unlock bootloader,
- Flashed TWRP and immediately after that I booted into recovery and rebooted,
- Rebooted to Fastboot (via adb reboot bootloader),
- Fastboot flashed that pre-rooted b378 boot.img and rebooted,
- Installed Phh's root.

N01tra said:
Yeah.. A FactoryReset seems to be a big "no no" after flashting TWRP as it will delete the keyboard and other stuff.
I was in that situation and restored a TWRP backup which got me back to booting into android, but somehow the Camera and LED (flashlight) didn't work.
Restoring an older and a complete backup did not help. Flashing the Update files did not help.
Eventually I ended up following the Honor 8 Rollback steps; going from Emui 5 (android 7) back to Emui 4.1 (android 6).
That also means the Bootloader is locked again, so you'll have to re-unlock it again (if you still have the code, you can use it again).
My steps after the Rollback:
- OTA updated back to Emui 5,
- Factory reset (BEFORE installing TWRP) and reboot.
- Enabled USB debugging,
- Unlock bootloader,
- Flashed TWRP and immediately after that I booted into recovery and rebooted,
- Rebooted to Fastboot (via adb reboot fastboot),
- Fastboot flashed that pre-rooted b378 boot.img and rebooted,
- Installed Phh's root.
Click to expand...
Click to collapse
I had the same as you describe here but I fixed it by flashing the 2 files I posted up here (a and b)

After doing it step by step as described in the first post, it worked I also flashed the P9 TWRP, just to make sure. It works! But i already miss Resurrection Remix from my Mi4c...
However, does this mean TWRP Backups are useless? :/

david320te said:
After doing it step by step as described in the first post, it worked I also flashed the P9 TWRP, just to make sure. It works! But i already miss Resurrection Remix from my Mi4c...
However, does this mean TWRP Backups are useless? :/
Click to expand...
Click to collapse
I'm glad to hear it works! :highfive:
TWRP backups never worked for me I always just flash it clean and then have titanium backup do the rest
Have a nice day

Hi,
maybe what I am going to ask sounds silly but as I am a kind of newbie hope you will forgive me
Why do we have to install a prerooted 378 image instead of a prerooted 380 Image. Aren't we on 380?
Where does this 378 image come from? Until now I only saw Nougat's 360 & 380 Roms.
I am already on 380 but my root doesn't seem to work properly so I wanted to give a try to thierrybla's OP's post but I don't know if to follow his instructions by using OldDroids TWRP to install his suggested prerooted 378 Image or instead by using OldDroids TWRP to install the other thread's Prerooted 380 img.
What shall I do if I'm already on 380 but would like to try thierrybla's procudure so see if I finally get a well-rooted 380 rom?
Any help would be appreciated.

fourcc said:
Hi,
maybe what I am going to ask sounds silly but as I am a kind of newbie hope you will forgive me
Why do we have to install a prerooted 378 image instead of a prerooted 380 Image. Aren't we on 380?
Where does this 378 image come from? Until now I only saw Nougat's 360 & 380 Roms.
I am already on 380 but my root doesn't seem to work properly so I wanted to give a try to thierrybla's OP's post but I don't know if to follow his instructions by using OldDroids TWRP to install his suggested prerooted 378 Image or instead by using OldDroids TWRP to install the other thread's Prerooted 380 img.
What shall I do if I'm already on 380 but would like to try thierrybla's procudure so see if I finally get a well-rooted 380 rom?
Any help would be appreciated.
Click to expand...
Click to collapse
Hey,
Your question is not stupid I can see why you are confused but everytime I tried to root or preroot something it didn't work for me I also run 380 and once I tried the prerooted 378 made by atariii it worked so there is no reason te be skeptical because I was in the same situation as you and this worked for me just give it a try you won't be disappointed

Thanks for your quick answer!!!
Ok, so I understand it is safe to install prerooted 378 image while being on nougat's 380. Thanks, I will try it right now!

fourcc said:
Thanks for your quick answer!!!
Ok, so I understand it is safe to install prerooted 378 image while being on nougat's 380. Thanks, I will try it right now!
Click to expand...
Click to collapse
Tell me how it went !
Goodluck!

Hey thierrybla, it worked beautifully! Thanks!
The only thing I did different is too install the prerooted image with Fastboot instead of the Oldroid Twrp.
I was afraid of messing my good working TWRP setup and decided to try what N01tra user suggested.
It worked like a charm! Thanks again!

fourcc said:
Hey thierrybla, it worked beautifully! Thanks!
The only thing I did different is too install the prerooted image with Fastboot instead of the Oldroid Twrp.
I was afraid of messing my good working TWRP setup and decided to try what N01tra user suggested.
It worked like a charm! Thanks again!
Click to expand...
Click to collapse
that's fine too I'm glad it worked good for you!
Have a nice day!

[marmite] Official Wileyfox Swift 2+ Updates (also for root) - Repository

Hi!
As Wileyfox issued another OTA today and the last time I had a hard time to find the proper information, I thought I'd start a thread that contains the update information and links for ALL OTAs in one place right at the start.
But first of all: This would not be possible without linuxct and mdosch who delivered this information in a combined effort. I added only a few things, like the new updates and put everything in one place.
1. The official update links from Wileyfox (partially from here, here and myself):
TOS118C (Recovery Image)
TOS163B (Recovery Image) Deleted by Wileyfox
TOS208G (Recovery Image) Deleted by Wileyfox
TOS249H (Recovery Image)
TOS319I (Recovery Image) Deleted by Wileyfox
TOS373J missing
UOS224B missing
UOS273C (Recovery Image)
TOS118C (Fastboot Image) Deleted by Wileyfox
TOS163B (Fastboot Image) Deleted by Wileyfox
TOS208G (Fastboot Image) Deleted by Wileyfox
TOS249H (Fastboot Image)
TOS319I (Fastboot Image)
TOS373J (Fastboot Image)
UOS224B missing
UOS273C missing
TOS089A to TOS118C (OTA Update)
TOS118C to TOS163B (OTA Update)
TOS163B to TOS208G (OTA Update)
TOS208G to TOS249H (OTA Update)
TOS249H to TOS319I (OTA Update)
TOS319I to TOS373J (OTA Update)
TOS373J to UOS224B (OTA Update to OREO 1)
UOS224B to UOS273C (OTA Update)
TOS373J to UOS273C (OTA Update to OREO 2)
2. The instructions how to make the OTA links work (taken from here):
If you directly click it, it will return an Error 404, but that is not true since the file actually exists... But requires a special HTTP header to be visible. Since I wanted to grab the OTA link now that, for once, I finally got an OTA in this phone after always upgrading through fastboot images, I used wireshark to determine the server where it fetches it and the full file route. It turns out the header sends a special UA string as you can see in the picture attached: rsotaua 1.0, which is, most probably, a randomly generated string. Now here's the thing: if you want to switch the UA you'll need an extension to do so. linuxct has used this one and on Firefox I used this one. As soon as it's installed, go to the Options of the extension and add it like here:
Code:
WILEYFOX rsotaua 1.0 Chrome Replace WF
Once the string is inserted, switch to it and hit the URL. The OTA should be downloadable now.
As I just found out: The "User Agent Switcher" for Chrome works just as fine.
3. The instructions how to update a rooted phone (taken from here):
I'll write down what I did to get it finally work, but be aware you might brick your phone. I did this with Windows 7 and 10 successfully with fastboot and adb installed.
3.1. Download and unzip the fastboot image from point 1. Then switch to fastboot mode and flash boot, recovery and system.
Code:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
3.2. Boot to stock recovery and choose "apply update from adb". Then sideload the update.
Code:
adb sideload wf-marmite-aa4d5d86bc-to-8eec3af77b-signed.zip
This is, of course, an EXAMPLE! You have to put in the name of the actual update you want to do.
3.3. After successful install wipe cache and dalvik/arts cache and reboot to system. If you have issues with "dm verity" do it with the following command (I myself didn't need to do it):
Code:
adb reboot "dm-verity enforcing"
3.4. When the update is configured let the phone switched on for a while (I don't know why, but mdosch ended in a bootloop and had to start again when he instantly rebooted, I myself didn't need to wait). Here you can already put the SuperUser ZIP-file onto your phone via USB (or do it later via sideload).
3.5. Then boot to bootloader and BOOT (not flash) TWRP
Code:
fastboot boot twrp-3.1.1-0-marmite.img
3.6. If you have the SuperUser ZIP-file already on the phone flash it, otherwise go to "ADB -> Sideload" and install there
Code:
adb sideload superuser.zip
3.7. Wipe cache and dalvik/arts cache and finally reboot. Again, if you have issues with "dm verity" do it with the following command (I myself didn't need to do it)::
Code:
adb reboot "dm-verity enforcing"
This is how it worked for me in Windows 7 and 10 on my Wileyfox Swift 2 Plus. Neither did I brick my phone, nor did I loose ANY(!) data, neither from storage nor from any app. But as I don't know what you did with yours I won't issue any warranties here...
BTW: If you ever wondered, when you do the OTA the phone saves the zip here: data/data/com.android.providers.downloads/cache
So, linuxct and mdosch thank you very much again and I hope you don't mind about what I did with your input. :fingers-crossed:
And also thanks to image45 and DIMICH666 for getting hold of some more of the image links.

Thanks, wish I had found this 2 hours earlier! I had been downloading the OTA update but it was failing to install. Spent ages searching my phone for the location of the download without success. Eventually connected my phone to my laptop and did 'adb logcat' - found the URL of the OTA File download "http:\/\/ota-files.wf.bsp.ninja\/marmite\/wf-marmite-8eec3af77b-to-0fcf4099d0-signed.zip". Changed 'User Agent' as described, put the URL in the address bar and hit enter and hey presto! Good to have a repository to refer to.

Hi
I'm already on TOS163B. Can I just sideload the TOS208G OTA zip? Without reflashing the boot, recovery and system images from TOS163B?
The images from TOS208G are not available.?

Thanks for this.
I managed to grab the TOD208G OTA. Flashing the zip in TWRP did not work though. I got an unexpected fingerprint error (6.0.1 instead of 7.1.2). I flashed the last available debloater on TOS163B (which worked fine), but that probably has got me in trouble now. Is there any way to fix this easily, without having to root and remove all the debloat stuff manually?
(... I dream about Lineage 14.1)

H2Oxide said:
Thanks for this.
(... I dream about Lineage 14.1)
Click to expand...
Click to collapse
We all do, I tried an unofficial build however no WiFi yet :crying:
Even with an official build we would still have the unlocked bootloader warning screen and the dm-verity screen that threatens to switch your phone off in 30 seconds if power not pressed. I am sure it only gave you 5 seconds then just continue to boot when running on the Cyanogen ROMs
I am sure there is some ADB the resolve this for the oneplusone phones.
After initial boot the ROM got stuck on the white splash screen. After I installed Magisk via TWRP flashable zip it worked so must need dm-verity switch off.

I never updated back at the end of 2016 because I was unsure if it was a good idea but now I've become annoyed by it constantly asking me to (OTA UK). Should I update to cm-marmite 460.6 MB like it's asking me to? And then I suppose it will pick up and ask me to install the updates since? Thanks.

quixoticduck said:
Should I update to cm-marmite 460.6 MB like it's asking me to? And then I suppose it will pick up and ask me to install the updates since? Thanks.
Click to expand...
Click to collapse
It needs to be what you want, I flashed the cm-13.1.4-ZNH2KAS5RM-marmite-signed-5175bd793a.zip then removed the cm updater to stop it prompting me to move to the next update as it would eventually have you on current build if you accept all the updates.
I flashed cm-13.1.4 as I found it the most stable Cyanogen Marshmallow 6.0.1 ROM and I wanted xposed framework.
However like I said at start of post what do you need from your phone/ android version?

image45 said:
It needs to be what you want, I flashed the cm-13.1.4-ZNH2KAS5RM-marmite-signed-5175bd793a.zip then removed the cm updater to stop it prompting me to move to the next update as it would eventually have you on current build if you accept all the updates.
I flashed cm-13.1.4 as I found it the most stable Cyanogen Marshmallow 6.0.1 ROM and I wanted xposed framework.
Click to expand...
Click to collapse
Thanks, I see what you mean, about it being personal preference. The last couple years I've stepped away from rooting and flashing roms, so right now I suppose all I really want is a stable safe version. Back in 2016 I remember people being worried about the OTA update released right after Cyanogenmod's end, with people thinking the new update might be suspicious (why I never updated, and then stopped following things). So if it turned out that the OTA update was fine then I suppose the easiest and safest way to stop it bugging me about the update might just be to update xD as long as there's no risks (besides the basic risk that any update could bring). Probably makes it easier for any further updates too if any appear.
I hadn't heard of the xposed framework, sounds interesting, I'll look into that just in case I want to use it.

quixoticduck said:
I hadn't heard of the xposed framework, sounds interesting, I'll look into that just in case I want to use it.
Click to expand...
Click to collapse
You need an unlocked bootloader and custom recovery to install xposed framework. However I can jump between any of the Swift 2 ROMs when ever I wish of course.

Currently on the update right before that one, with TWRP and Magisk installed. I found the zip as instructed. Has anybody had success with Flashfire for a small OTA update like this or do you absolutely have to use adb sideload?

Don't know whether I can post links to other sites but there are instruction on how to update to 7.1.2 using the OTA file for both rooted and non-rooted devices at
http://www.stechguide.com/install-android-7-1-2-nougat-on-wileyfox-swift-2/

H2Oxide said:
Thanks for this.
I managed to grab the TOD208G OTA. Flashing the zip in TWRP did not work though. I got an unexpected fingerprint error (6.0.1 instead of 7.1.2). I flashed the last available debloater on TOS163B (which worked fine), but that probably has got me in trouble now. Is there any way to fix this easily, without having to root and remove all the debloat stuff manually?
Click to expand...
Click to collapse
Any thoughts on this? Can I force a sideload or would that be unwise...

der_dkw said:
So, linuxct and mdosch thank you very much again and I hope you don't mind about what I did with your input. :fingers-crossed:
Click to expand...
Click to collapse
Sure that's fine.
I really appreciate you collected all the information and created this overview.

Well I finally managed to try the adb sideload and this is what I got.
What's wrong here?
I'm using TOS163B (7.1.2) so I don't know why it says I have 6.0.1 test keys. I'm trying to sideload TOS208G
Any help is much appreciated

Jack3volution said:
What's wrong here?
Click to expand...
Click to collapse
You are using TWRP not stock recovery.
The OTA zips check your device for not being altered (like rooting or using custom recovery) this is why you have to go to a plain stock rom while flashing boot, recovery and system from the fastboot image (not the complete image as it will erase your data as well I assume).
After you have done this boot to stock recovery and adb sideload the first OTA zip then reboot and so on until you are on the latest.
Then you can boot twrp (I recommend booting instead of flashing as for me it complained about my device being altered when I flashed twrp) and root again (as root was lost during this update process).

Thanks! my mistake. Yeah I still have stock recovery
Cheers

mdosch said:
Then you can boot twrp (I recommend booting instead of flashing as for me it complained about my device being altered when I flashed twrp) and root again (as root was lost during this update process).
Click to expand...
Click to collapse
What's the actual different between booting TWRP and flashing please?

image45 said:
What's the actual different between booting TWRP and flashing please?
Click to expand...
Click to collapse
Booting means you boot TWRP temporarily without replacing your stock recovery. Flashing means you replace the stock recovery with TWRP.

mdosch said:
You are using TWRP not stock recovery.
Click to expand...
Click to collapse
Hmm it didn't work in stock recovery either

Jack3volution said:
Hmm it didn't work in stock recovery either
Click to expand...
Click to collapse
Did you apply the OTA zips in the correct order?
Did you alter your devices in any way like rooting or installing magisk?
You are on TOS163B you said. Did you start your device before booting to recovery? For me after sideloading the TOS163B, sideloading of TOS208G failed when I tried to install it instantly so I cleared the cache/dalvik cache booted to Android, then rebooted to (stock) recovery again and successfully sideloaded TOS208G.

Help with soft brick

Hi guys,
I got the ASUS Zenfone 3 Zoom and started playing with it. Unfortunately I managed to soft brick it and somehow I can't go back to stock. Here are all the things I did. I would be happy to get any ideas what to try next:
1. unlocked the bootloader - using asus's official unlock tool
2. flashed twrp recovery - twrp-3.2.1-0-Z01H-20180304.img, using:
adb reboot bootloader
fastboot flash recovery twrp.img
3. updated asus's firmware to the latest official one:
copying UL-Z01H-WW-71.60.139.30.zip onto internal memory
android detects the update and applying it using android
4. Enabling lock pattern at boot (from android settings). Correct pattern required even when booting into recovery
5. Installing supersu via twrp:
adb reboot recovery
installing supersu
wiping caches (the cache partition cannot be wiped)
6. SuperSu working (tested via android)
7. Reading about Magisk. Trying to install magisk via twrp. Magisk's installer complained that the system is not vanilla (due to SuperSu modifications). Have to uninstall SuperSu to return to previous state.
8. Tried uninstalling SuperSu from the program itself (in android). The uninstaller got stuck. The phone become unresponsive and had to reboot.
9. Found a script packaged as an executable zip (to be installed via twrp) that will uninstall SuperSu and return system to pristine state (SuperSu makes a backup of the files it changes before installation) - UPDATE-unSU-signed.zip. Uninstallation worked.
10. Magisk installation still complained about the bootloader. Then things started to go wrong. I unpacked the latest firware UL-Z01H-WW-71.60.139.30.zip, took out boot.img and tried to flash just the bootloader
fastboot flash boot boot.img
11. Upon reboot the phone got stuck at the ASUS logo. Reboot into recovery and into fastboot still works (soft brick). Still shows unlock pattern at boot.
12. I tried flashing the original firmware using TWRP (install a zip). However the installation threw some errors. Unsuccessful.
13. I've tried flashing the system.img from the original firware using fastboot but still it's stuck at the ASUS logo at boot.
fastboot flash system system.img
Here I am stuck. I've read that TWRP cannot install properly the ASUS official firmware but if you flash the original recovery, it can probably flash it properly. Another thing that I think might explain why I cannot get out of the soft brick is that I've enabled the lock pattern at boot, which effectively encrypted some parts of the phone and I have a strong feeling this interferes with the boot process. I will look for a script/installable zip (via twrp) that can remove the lock.
I really need ideas/suggestions before I make something that will turn my phone into a hard brick. Thanks.

What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you

Thanks
+)KEV1N(+ said:
What you need to do is flash stock MM recovery from bootloader using "fastboot flash recovery recovery.img"
Since it came with MM preloaded you'll have to install the ROM using stock recovery via adb. It'll take a while, but after that you should upgrade to the latest MM update.
After that, update to any Nougat patch update you wish to receive, because I still haven't figured out yet how to apply them all with @shakalaca's recovery images.
Once you're done, you can install twrp again and flash magisk.
Good luck and hope this helped you
Click to expand...
Click to collapse
Thanks,
I tried to find a stock recovery images but unsuccessful. Can you tell me where to get it from?

Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck

+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
-- [link] removed due to XDA regulations
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).

mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.

mollonado said:
Sorry I misread your comment. I'm updating to the latest ROM and installing TWRP. Thanks for the help.
Click to expand...
Click to collapse
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
mollonado said:
Thanks, I managed to flash 11.40.86.75 and stock ROM using your instructions. I will look now into updating and applying magisk. Just a final question. You mentioned to install Nougat patch update and not a full firmware, but my phone came preloaded with Nougat. Will this be a problem? I installed stock 71.60.139.30 and it worked fine (i was able to boot into twrp).
Click to expand...
Click to collapse
It came preloaded with Nougat? Interesting.

+)KEV1N(+ said:
Glad to help!
---------- Post added at 01:33 PM ---------- Previous post was at 01:30 PM ----------
It came preloaded with Nougat? Interesting.
Click to expand...
Click to collapse
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?

mollonado said:
Hi I managed to flash stock ROM - 71.60.139.30, but after that I can't flash twrp - twrp-3.2.1-0-Z01H-20180304.img. I tried with:
adb reboot bootloader
fastboot flash recovery twrp.img
but when I try to boot into recovery with:
adb reboot recovery
it goes into the stock recovery. Is there something I missed? Do I need to downgrade to flash TWRP?
Click to expand...
Click to collapse
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.

+)KEV1N(+ said:
Quick question: which of these warnings do you get when you boot?
https://www.androidauthority.com/go...rrupted-and-modified-android-software-629180/
Also, did you try power cycling to get it to boot?
And since the version number made such a large jump, I believe they must have changed something internally with the latest update and that it's probably going to be one of the last Nougat updates before Oreo (which was delayed until June).
I still need to update to that version to check it out, but I might reset soon since I was waiting for Oreo to reset.
Click to expand...
Click to collapse
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.

mollonado said:
I have the Orange warning. It looks a bit different but the wording is the same. Yes, i tried powercycling and still I boot into the stock recovery. What can I do now? Is it possible to downgrade? I am not sure if I boot into stock recovery if it will let me flash an older stock ROM.
Click to expand...
Click to collapse
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?

mollonado said:
I read here - https://android.gadgethacks.com/how-to/twrp-101-install-best-custom-recovery-for-android-0179547/
that once you flash twrp Android upon next reboot might overwrite it with the stock recovery. Is that possible?
Click to expand...
Click to collapse
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.

+)KEV1N(+ said:
So, how did you flash TWRP exactly? Using that guide? Or flashed through bootloader?
And to answer your question: yes, it happens sometimes.
Click to expand...
Click to collapse
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,

mollonado said:
Hi, I managed to get around it by directly booting into TWRP from fastboot. Yes, apparently unless I flash some TWRP files to the system partition upon next reboot, the recovery will return to stock. Anyway, I managed to install Magisk and Exposed framework and have been poking with those two for the last couple of days.
The youtube vanced app is great, but I found something that worries me. I can't login to facebook/twitter. I checked and the reason is I can't connect to the facebook.com or twitter.com https sites (even over chrome). I think either:
- I've installed some module which is messing with that
- my rooted phone is hacked
I've installed a module that is meant as ad blocker, that updates the hosts file. However I removed all modules and the problem remains. I really don't wanna start all over again just to check. And even if I reflash and it works, I will not know what caused it and how to fix it myself next time. Do you have any ideas on how to figure out what the problem is?
Regards,
Click to expand...
Click to collapse
First off, my apologies for this late reply (Been superbusy with school and internship assignments)
Secondly, and that is why I only use magisk. Because once you mess with the host file, depending on what module you install, it can range from tripping safetynet to bootlooping.
So quick question, is it still in this state right now since 9 days ago?
Greetings,
Kevin

+)KEV1N(+ said:
Here's a link to Shakalaca's recovery images.
In the Old folder you'll find MM stock recoveries.
https://mega.nz/#F!p90wgAaY!l1JbJilmAUEKTKWu43pT9w!I89QgZpK
Flash 11.40.86.75 recovery
Boot into recovery
Flash 11.40.86.75 stock rom via adb (it'll take a while)
Once it's done, boot into Android.
Download your respective region's latest MM rom.
Send it to your micro sd.
Install it once Android detects the update file.
(It won't work with custom recovery. I tried every recovery Shakalaca has and only those two seem to work)
Once on the latest MM rom install any nougat patch update you wish to apply, because once you have a nougat rom, you can't boot stock recovery. (As far as my testings went)
So if I were you, I'd go for any update after the zenui 4.0 update since it's a bit better looking imo.
After that final update you can flash TWRP to root your phone. I prefer using magisk, since it doesn't modify the system files.
All you need to do is flash magisk and that's it. No need for SuperSU or anything else. And by any means, do NOT wipe your cache partition once you flash TWRP, otherwise you'll get stuck on the Asus logo during boot.
If you wish to retain the "certified" status in google play store's device certification, do NOT go into the play store before installing magisk. Also, don't delete play store data, otherwise you'll lose your previous purchases.
This post was longer than I initially thought it'd be, but I guess this sums it up pretty well.
Good luck
Click to expand...
Click to collapse
I made a mistake and could not install recovery stock, I followed what you wrote in the beginning install MM recovery and so I did a hard reset and I was able to install the most current recovery stock and installed ROM Oreo, Thanks. Sorry, I'm on google translator.

Foolproof way for OTA-update with Magisk installed

Now that a new OTA is available, and like many others like myself have rooted the A1 with Magisk, I am looking for a foolproof way to update.
Remembering the last (March) OTA, when a lot of people complained about difficult, I wonder if someone has found a good way.
I remember 2 approaches:
1) follow the flow from here: https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
or
2) uninstall Magisk completely, maybe even re-lock the phone, and start from the beginning as outlined here: https://forum.xda-developers.com/mi-a1/how-to/root-mi-a1-oreo-8-0-disabling-ota-magisk-t3728654
What is your experience or recommendation?

Tiemichael said:
Now that a new OTA is available, and like many others like myself have rooted the A1 with Magisk, I am looking for a foolproof way to update.
Remembering the last (March) OTA, when a lot of people complained about difficult, I wonder if someone has found a good way.
I remember 2 approaches:
1) follow the flow from here: https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips
or
2) uninstall Magisk completely, maybe even re-lock the phone, and start from the beginning as outlined here: https://forum.xda-developers.com/mi-a1/how-to/root-mi-a1-oreo-8-0-disabling-ota-magisk-t3728654
What is your experience or recommendation?
Click to expand...
Click to collapse
Hey!
Following the official Magisk procedure works, at least for me.
You just have to be careful to restore backup image before starting the OTA download and installing to second slot (After OTA) before rebooting.
Reading this thread:
https://forum.xda-developers.com/mi-a1/how-to/root-mi-a1-oreo-8-0-disabling-ota-magisk-t3728654
I found there’s a lot of confusion (I was confused also and made a few mistakes), but my conclusions are:
- That method is to be used just ONCE in order to gain root, and not every month.
- Always try to use your own patched image if you have the opportunity
- You have to use “fastboot BOOT” and not “fastboot FLASH” when first rooting, otherwise you won’t be able to restore boot image and OTA will fail
- Follow official procedure as a cooking recipe
If you don’t want to root using a patched boot image, you can also use latest TWRP (As of now latest is recovery-3.2.1-2-oreo.img)
https://forum.xda-developers.com/mi-a1/development/recovery-twrp-3-1-1-0-touch-recovery-t3688472
And boot to TWRP image in order to install Magisk ZIP (did this yesterday and also worked), but the update via OTA method should be the same.
Best regards.

Personally I just did this:
1) Uninstall magisk (remember to save modules you want to save etc.)
2) Reflash stock boot.img (march update) via fastboot (in the correct booting partition)
3) Relock bootloader
4) Update
5) Unlock bootloader
5) Booting in new april patched_boot.img
6) install Magisk.
official magisk method didn't work for me

Keeping phone to stock and not rooting for only one OTA in more than a month? I think its not worth it!!
I always root my phone and when OTA arrives i just flash twrp version of it and root it again ?

Siebenmik said:
Personally I just did this:
1) Uninstall magisk (remember to save modules you want to save etc.)
2) Reflash stock boot.img (march update) via fastboot (in the correct booting partition)
3) Relock bootloader
4) Update
5) Unlock bootloader
5) Booting in new april patched_boot.img
6) install Magisk.
official magisk method didn't work for me
Click to expand...
Click to collapse
Just wondering "2) Reflash stock boot.img (march update) via fastboot (in the correct booting partition) " should be identical to "Restore Images" in Magisk Uninstall
I think updating can be done without "locking bootloader " and "un-locking bootloader"
What do you think?

I'm following the very simple Magisk OTA update guide and I have been able to update system via OTA for several months already. No rocket science there, as long as you don't mess with system partition (e.g. do NOT allow system modification in TWRP), you are good to go. I even used it successfully with custom kernel (Franco kernel)..

_mysiak_ said:
I'm following the very simple Magisk OTA update guide and I have been able to update system via OTA for several months already. No rocket science there, as long as you don't mess with system partition (e.g. do NOT allow system modification in TWRP), you are good to go. I even used it successfully with custom kernel (Franco kernel)..
Click to expand...
Click to collapse
Are you referring to this guide https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips?

Tiemichael said:
Are you referring to this guide https://github.com/topjohnwu/Magisk/blob/master/docs/tips.md#ota-installation-tips?
Click to expand...
Click to collapse
Yes, exactly. I didn't have any issue with OTA installation yet.

Tiemichael said:
Just wondering "2) Reflash stock boot.img (march update) via fastboot (in the correct booting partition) " should be identical to "Restore Images" in Magisk Uninstall
I think updating can be done without "locking bootloader " and "un-locking bootloader"
What do you think?
Click to expand...
Click to collapse
I forgot saying that using restore image in magisk didn't work. Even though I didn't flash the patched boot.

https://github.com/topjohnwu/Magisk/...tallation-tips
This process works every time if you have enabled secured startup.. If secured startup is disabled then you will get bootloop..

coolkoushik07 said:
https://github.com/topjohnwu/Magisk/...tallation-tips
This process works every time if you have enabled secured startup.. If secured startup is disabled then you will get bootloop..
Click to expand...
Click to collapse
Where to enable secured startup?

Skeuomorphic said:
Where to enable secured startup?
Click to expand...
Click to collapse
create a pattern from security setting and it will prompt to enable secure startup.. just press yes..

coolkoushik07 said:
https://github.com/topjohnwu/Magisk/...tallation-tips
This process works every time if you have enabled secured startup.. If secured startup is disabled then you will get bootloop..
Click to expand...
Click to collapse
Finally a different answer, I have secure boot disabled maybe this is the reason ending into bootloop for past 3 montly security updates. Will try this for May update.

coolkoushik07 said:
https://github.com/topjohnwu/Magisk/...tallation-tips
This process works every time if you have enabled secured startup.. If secured startup is disabled then you will get bootloop..
Click to expand...
Click to collapse
Where can I find 'secured startup' ?
Sorry, for the maybe stupid question ....

Tiemichael said:
Where can I find 'secured startup' ?
Sorry, for the maybe stupid question ....
Click to expand...
Click to collapse
Settings->Security & Location->Screen lock->Pattern

This what was working for me just now:
Detailed steps performed 20.4.2018:
Backup Titanium
Backup Magisk Modules
Switch on Secured Booting (e.g. Pin) => not same a normal pin!
Open Magisk
Uninstall Magisk​
Restore Images​
Start OTA update
Downlowd​
Step1​
Step2​
Go Back to Magisk
Install to 2nd slot​
Reboot​
It was working ... very easy!

I can confirm that topjohnwu's official ota tips do work with the Mi A1, but you must have secure booting enabled.

I didn't update my phone for a very long time, then I decided to finally go for the latest MIUI on my Mi Max and basically I flashed full new ROM via fastboot & MiPhone.
You can see detailed description here: https://forum.xda-developers.com/showpost.php?p=78050983&postcount=41
I think it should work with other Xiaomi phones too but please correct me if I'm wrong
The only difference is that I had SuperSu before, but maybe with Magisk it's the same to do - also correct me if i'm wrong

quetzalcoatl2435 said:
I can confirm that topjohnwu's official ota tips do work with the Mi A1, but you must have secure booting enabled.
Click to expand...
Click to collapse
THERE IS AN ALTERNATIVE WAY.
Advantages:
-100% working. Absolutely no problem with unrooting.
-secure booting doesn't have to be enabled.
Disadvantages:
-Installed modules will be lost. I don't know how to back them up.
H.A.L. 9000 said:
---------------------HOW TO UPDATE-----------------------------------------------------------------------------------------------------
When you will receive the update the only thing you need to do is boot twrp, flash magisk unistaller (that you can find here ) and update.
1. type this to boot your recovery (REMEMBER TO COPY THE RECOVERY IMG INTO THE FASTBOOT FOLDER)
Code:
fastboot boot recovery-3.2.1-2-oreo.img
2. flash magisk unistaller from recovey
3. Update your system
4. Repeat the same procedure to root again your device.
If you are italian and you need any help you can find it here, the serious telegram community.
https://t.me/XiaomiMiA1Italia
Special thanks to @samuele94 and @TheRealajeje from the telegram group.
Click to expand...
Click to collapse

freekarol said:
THERE IS AN ALTERNATIVE WAY.
Advantages:
-100% working. Absolutely no problem with unrooting.
-secure booting doesn't have to be enabled.
Disadvantages:
-Installed modules will be lost. I don't know how to back them up.
---------------------HOW TO UPDATE-----------------------------------------------------------------------------------------------------
When you will receive the update the only thing you need to do is boot twrp, flash magisk unistaller (that you can find here ) and update.
1. type this to boot your recovery (REMEMBER TO COPY THE RECOVERY IMG INTO THE FASTBOOT FOLDER)
Click to expand...
Click to collapse
Yeah, but you need a PC for this. If I need access to a PC every time there's an OTA update, might as well download and flash a full ROM. ?
Official Magisk OTA guide works anytime anywhere, no PC needed.

Needed stock boot image for 8.1 (June patch)

I wanted to relock my Mi A1 but forgot to backup the stock boot image. Searched the monthly ROM update thread but it's not there yet.
Anyone got it?
Thanks!
Edit:
My bad, it was June patch (OPM1.171019.019.V9.6.3.0.ODHMIFE)

https://forum.xda-developers.com/mi-a1/how-to/ota-xiaomi-mi-a1-ota-links-t3718542

i need stock boot image for july patch to
I want to update to August but I have already rooted Magisk and I uninstalled it first which happened to be uncommand, because it might boot. img patch has overwritten boot.img default.
for the link above I do not understand why it is so large in size even though the img boot that has been patched is less than 5MB.
please help

nirvanarahadian said:
I want to update to August but I have already rooted Magisk and I uninstalled it first which happened to be uncommand, because it might boot. img patch has overwritten boot.img default.
for the link above I do not understand why it is so large in size even though the img boot that has been patched is less than 5MB.
please help
Click to expand...
Click to collapse
it's the entire rom, not only the boot image, that's why it is so large in size

Done
smsporto said:
it's the entire rom, not only the boot image, that's why it is so large in size
Click to expand...
Click to collapse
Done i downloaded fastboot in here https://forum.xda-developers.com/mi...-ota-links-t3718542/post74828108#post74828108, i download Android 8.1.0 [OPM1.171019.026.V9.6.4.0.ODHMIFE] (fastboot image) and i do flash with cmd boot.img. its work , not uncommand anymore, and i did an experiment with restarting my phone and stock boot img is only temporary and returns uncommand. how to fix it?,is it safe if i immediately update to the latest patch from OTA, the thing that is feared if booting will return like that and i'm confused looking for boot.img for august patch

nirvanarahadian said:
Done i downloaded fastboot in here https://forum.xda-developers.com/mi...ota-links-t3718542/post74828108#post74828108, i download Android 8.1.0 [OPM1.171019.026.V9.6.4.0.ODHMIFE] (fastboot image) and i do flash with cmd boot.img. its work , not uncommand anymore, and i did an experiment with restarting my phone and stock boot img is only temporary and returns uncommand. how to fix it?,is it safe if i immediately update to the latest patch from OTA, the thing that is feared if booting will return like that and i'm confused looking for boot.img for august patch
Click to expand...
Click to collapse
If u are sure that u haven't touched the system partition then u can try to update via OTA. Make sure u flashed and not only booted the downloaded boot.img from V9.6.4.0 ROM. I guess it's better to download the latest version from here:
https://drive.google.com/drive/mobile/folders/1dw87qgRNGxfj7UZduHK91LE6X1Xs7CWL
Then do a clean flash and install the entire ROM with fastboot.

"'*"*"
I've done flashing while on the way and I'm waiting. My cellphone suddenly turns on and it looks like it's doing a factory format. and I just updated it to August. all my data is lost even though the user data has been secured and the flashing process has not finished