When I try to flash TWRP in any possible way it says that the operation was completed but when I reboot into the recovery I get a blank screen. How do I fix this?
Related
I know this might be a long post but I need ALL the help I can get. I have a TMO M919 with TWRP 2.5.0.2. My problem is,to me, complex. When I boot system, I hang on slash screen. When I boot TWRP I hang on TWRP splash screen. This is how I got to where I am not
1)Tried to flash AOSP SMS app, did the wrong one and everything was FC
2)Booted TWRP to flash UNDO.zip and all went to hell.
3) Stuck on Samsung splash screen, boot recovery stuck on twrp and I get the TWRP asking for PASSWORD! Obviously I do not have one.
4) selected cancel and wipped everything, factory reset, reset data, everything.
5) rebooted twrp and hangs on twrp splash screen. Reboot twrp again and again asks for password. Same song and dance
5) Flash TWRP via ODEN and TWRP still asks for Password
Now I wipe all again but reboot twrp, get in and insert micro SD contain backup, I restore back up and all seems well.
Now every single reboot is the exact same 1 -5 all over again. I can get into D/L mode just fine but it says "Write Protection:Enabled" but still can flash via ODIN.
What do I do guys?!?! I have no idea whats going on. TWRP wants a password that doesnt exist and I have no idea what I did or what to do. I can't turn off my phone....EVER or I can't ever boot with out getting stuck. I dont have an ODIN of the stock TAR:crying::crying::crying::crying::crying:
Take a tar from sammobile (for your phone and region) and use it with ODIN
hii guys i can't install twrp on my play.....whenever i enter the command i get the error
"error: cannot load twrp-lux-2.8.7.0"
also the windroid tool says twrp flashed successfully but when i reboot into recovery it boots into stock recovery with "no command" on display
any help appreciated
What are you typing when trying to flash?
fastboot flash recovery nameoffile.img
Not sure if you are having the same issue I did.
Are you flashing TWRP then using the reboot command to restart your phone immediately?
If so, try flashing TWRP again. Instead of rebooting, try to access the recovery menu right after flashing. This worked for me. The post I saw related to this mentioned the Moto was overwriting something when rebooting. I haven't had any issues since.
Here's what happened:
1. flashed wrong twrp version for 8.1 oreo, used correct CF-auto root
- tablet booted to stock recovery screen a few times but i figured it was part of the process so I just rebooted
-ended up getting a failed identification verification
-i know the auto root worked because my warranty is void :silly:
2. reset my tablet from the failed verification screen
-eventually got myself to a blue erasing screen loop
-flashed twrp again and got myself to a point where booting into recovery resulted in glitchy lines
3. attempted to factory reset from reboot with adp
-not sure if it worked tbh
-also tried to reboot to recovery screen and that didn't really do anything
4. found and installed the proper version of twrp (3.2.3-4)
-now stuck in feedback loop that occasionally shows the twerp screen so i know something's right
-won't boot to recovery screen but will boot to download page
-doesn't show up in adp devices during this loop
-- have CONTINUOUSLY tried flashing firmware (I've tried 6.0, 7.0?, and 8.1) none of them have worked, sporting some variant of secure check fail (PIT, bootloader, or RADIO)
-- have tried the mod here but it fails after param.bin and i can't use it directly after auto root without rebooting because it gets stuck on setup connection
-- most likely not a hardware problem because i had this tablet for basically a day before i did this to myself
--OEM is unlocked, not that i could change it even if it wasn't
---is there anything that anyone would recommend trying before i take this to geek squad (who may not help me but i'm still going to try) or should i just cry myself to sleep over wasting $300 :crying::crying:
abstractartemis said:
Here's what happened:
1. flashed wrong twrp version for 8.1 oreo, used correct CF-auto root
- tablet booted to stock recovery screen a few times but i figured it was part of the process so I just rebooted
-ended up getting a failed identification verification
-i know the auto root worked because my warranty is void :silly:
2. reset my tablet from the failed verification screen
-eventually got myself to a blue erasing screen loop
-flashed twrp again and got myself to a point where booting into recovery resulted in glitchy lines
3. attempted to factory reset from reboot with adp
-not sure if it worked tbh
-also tried to reboot to recovery screen and that didn't really do anything
4. found and installed the proper version of twrp (3.2.3-4)
-now stuck in feedback loop that occasionally shows the twerp screen so i know something's right
-won't boot to recovery screen but will boot to download page
-doesn't show up in adp devices during this loop
-- have CONTINUOUSLY tried flashing firmware (I've tried 6.0, 7.0?, and 8.1) none of them have worked, sporting some variant of secure check fail (PIT, bootloader, or RADIO)
-- have tried the mod here but it fails after param.bin and i can't use it directly after auto root without rebooting because it gets stuck on setup connection
-- most likely not a hardware problem because i had this tablet for basically a day before i did this to myself
--OEM is unlocked, not that i could change it even if it wasn't
---is there anything that anyone would recommend trying before i take this to geek squad (who may not help me but i'm still going to try) or should i just cry myself to sleep over wasting $300 :crying::crying:
Click to expand...
Click to collapse
Flash twrp, FORMAT (not wipe) data, install Magisk.
Reboot.
ashyx said:
Flash twrp, FORMAT (not wipe) data, install Magisk.
Reboot.
Click to expand...
Click to collapse
So just keep flashing it until i can boot to twrp recovery basically?
abstractartemis said:
So just keep flashing it until i can boot to twrp recovery basically?
Click to expand...
Click to collapse
What's stopping you boot to Download mode?
ashyx said:
What's stopping you boot to Download mode?
Click to expand...
Click to collapse
I can boot to download mode but i can't boot to recovery mode after flashing twrp. When I try I just get stuck in a reboot loop, so I can't try to boot to recovery from adp either.
abstractartemis said:
I can boot to download mode but i can't boot to recovery mode after flashing twrp. When I try I just get stuck in a reboot loop, so I can't try to boot to recovery from adp either.
Click to expand...
Click to collapse
If you can flash twrp then not booting to twrp must be pilot error.
It MUST be done immediately after flashing in odin.
i want to install pixel experience, i use twrp wipe data, system. Then i install the custom rom, and i suddenly install again the twrp and wrong clicked 'boot' and installed. After that, 'no command' occur when i boot into recovery mode. How can i fix it? I flash recovery through adb but also 'no command'... Pls help me:crying:
ArlenCheng said:
i want to install pixel experience, i use twrp wipe data, system. Then i install the custom rom, and i suddenly install again the twrp and wrong clicked 'boot' and installed. After that, 'no command' occur when i boot into recovery mode. How can i fix it? I flash recovery through adb but also 'no command'... Pls help me:crying:
Click to expand...
Click to collapse
You forgot to reboot recovery instead of the system after flashing TWRP so have lost TWRP. There is essentially no recovery on the phone now which is why you are getting that message. You need to boot TWRP using the fastboot image from fastmode mode and then reinstall TWRP again from there. Make sure to reboot to recovery after flashing. TWRP should stick after this.
Hello,
I tried to flash my S8 with TWRP with Odin. OEM and Debugging is active. After I had some failed flashes, when I now boot into revocery (VolUp+Bixby+Power) there is a blue background with a yellow warning sign and a dead android guy and "no command" but after some seconds I get into recovery mode. Even though I made factory reset and wipe I still get the error everytime I boot into recovery. When I now go to bootloader, flash TWRP with Odin I get a succesfull-message from Odin. But when I boot into recovery afterwards there is still the Android Recovery and not TWRP.
I tried different Odin and TWRP Versions and deactivatet F.reset and autostart.
Can someone help me? According to google search the blue background with the dead android guy should be gone after factory reset and wipe but its still there.
crackhead131 said:
Hello,
I tried to flash my S8 with TWRP with Odin. OEM and Debugging is active. After I had some failed flashes, when I now boot into revocery (VolUp+Bixby+Power) there is a blue background with a yellow warning sign and a dead android guy and "no command" but after some seconds I get into recovery mode. Even though I made factory reset and wipe I still get the error everytime I boot into recovery. When I now go to bootloader, flash TWRP with Odin I get a succesfull-message from Odin. But when I boot into recovery afterwards there is still the Android Recovery and not TWRP.
I tried different Odin and TWRP Versions and deactivatet F.reset and autostart.
Can someone help me? According to google search the blue background with the dead android guy should be gone after factory reset and wipe but its still there.
Click to expand...
Click to collapse
Sounds like incorrect installation of TWRP.
Did you boot up into TWRP straight after installation? not system.
Note: - USB Debugging is not required.
- Just start up odin leave default settings - In options section you can untick Auto Reboot then flash TWRP then boot into TWRP manually before starting system.