Database Users

GRA-UL10 - Bootloop

Hello, I have a P8 stuck in bootloop after failed update from HiSuite. I cannot access device recovery and can only access FastBoot & Rescue mode. I tried the instructions found here however every time cmd prompts say Failed (remote command not allowed). What can I do to unbrick this phone? I do not mind losing any data as this is my backup phone however, I wish to recover from bootloop. Help is appreciated. Sorry for noob question. Thank You so much.

I had the exact same problem and just fixed it.
If you have the product ID then you can get the boot loader unlock code from the EMUI website. As I couldn't get onto the phone this was no help. There is a product id generator using IMEI and Product model but couldn't get it although others had success.
Tried putting items on sd micro card etc all the button combos etc. But wouldn't work.
I had to download something called DC-Phoenix and pay 15 euros (£12), very wary. But downloaded the lowest firmware I could for my device B130 and then had to install through that and the usb.
I'm annoyed I had to spend money but it did work, tried looking for cracks keygens etc, so bit the bullet. I'd say try everything, but this was the way it worked. Has a backdoor built into it that changes the boot loader to unlock and does all the fast boot. I just wish someone could find what this backdoor is for the future. As of now I've made sure to get the product id and boot loader code for future problems rather than spend over and over.
Good Luck

ffcchris said:
I had the exact same problem and just fixed it.
If you have the product ID then you can get the boot loader unlock code from the EMUI website. As I couldn't get onto the phone this was no help. There is a product id generator using IMEI and Product model but couldn't get it although others had success.
Tried putting items on sd micro card etc all the button combos etc. But wouldn't work.
I had to download something called DC-Phoenix and pay 15 euros (£12), very wary. But downloaded the lowest firmware I could for my device B130 and then had to install through that and the usb.
I'm annoyed I had to spend money but it did work, tried looking for cracks keygens etc, so bit the bullet. I'd say try everything, but this was the way it worked. Has a backdoor built into it that changes the boot loader to unlock and does all the fast boot. I just wish someone could find what this backdoor is for the future. As of now I've made sure to get the product id and boot loader code for future problems rather than spend over and over.
Good Luck
Click to expand...
Click to collapse
Thank You, but I would like to use this as last resort. Are there any other possible solutions before I buy 15 (22CAD) credits?

ffcchris said:
I had the exact same problem and just fixed it.
If you have the product ID then you can get the boot loader unlock code from the EMUI website. As I couldn't get onto the phone this was no help. There is a product id generator using IMEI and Product model but couldn't get it although others had success.
Tried putting items on sd micro card etc all the button combos etc. But wouldn't work.
I had to download something called DC-Phoenix and pay 15 euros (£12), very wary. But downloaded the lowest firmware I could for my device B130 and then had to install through that and the usb.
I'm annoyed I had to spend money but it did work, tried looking for cracks keygens etc, so bit the bullet. I'd say try everything, but this was the way it worked. Has a backdoor built into it that changes the boot loader to unlock and does all the fast boot. I just wish someone could find what this backdoor is for the future. As of now I've made sure to get the product id and boot loader code for future problems rather than spend over and over.
Good Luck
Click to expand...
Click to collapse
I had similar problem only was able to access Bootloader because i wiped system with TWRP, after some hours of searching i find out that:
What you need is able to use ADB and fastboot on your pc and have a sd card, then:
1. Download HuaweiUpdateExtractor http://forum.xda-developers.com/attachment.php?attachmentid=3262545.
2. Download any stock firmware which have UPDATE.APP file.
3. Use HuaweiUpdateExtractor and extract UPDATE.APP to a lot of smaller files.
4. Move RECOVERY.IMG to adb folder and install it through command line using adb fastboot.
5. Good job now you can use recovery again, now you need to use SD card and put a folder named dload and inside download firmware which is named UPDATE.APP
6. Reboot your phone and now hold Volum UP+DOWN+POWER and huawei recovery will begin, just dont forget to remove usb cable sometimes you get trouble when updating.
If you didn't use ADB fastboot then it will be harder to understand but you can find guides how to use it.
Hope that will help.

arnas23 said:
I had similar problem only was able to access Bootloader because i wiped system with TWRP, after some hours of searching i find out that:
What you need is able to use ADB and fastboot on your pc and have a sd card, then:
1. Download HuaweiUpdateExtractor http://forum.xda-developers.com/attachment.php?attachmentid=3262545.
2. Download any stock firmware which have UPDATE.APP file.
3. Use HuaweiUpdateExtractor and extract UPDATE.APP to a lot of smaller files.
4. Move RECOVERY.IMG to adb folder and install it through command line using adb fastboot.
5. Good job now you can use recovery again, now you need to use SD card and put a folder named dload and inside download firmware which is named UPDATE.APP
6. Reboot your phone and now hold Volum UP+DOWN+POWER and huawei recovery will begin, just dont forget to remove usb cable sometimes you get trouble when updating.
If you didn't use ADB fastboot then it will be harder to understand but you can find guides how to use it.
Hope that will help.
Click to expand...
Click to collapse
Hi, when I type in on adb fastboot windows cmd fastboot flash recovery RECOVERY.img, cmd respond with "target reported max download size of 471859200 bytes error cannot load 'recovery.img' : no error

nexusyasuo said:
Hi, when I type in on adb fastboot windows cmd fastboot flash recovery RECOVERY.img, cmd respond with "target reported max download size of 471859200 bytes error cannot load 'recovery.img' : no error
Click to expand...
Click to collapse
Put recovery.img in adb folder and try again

arnas23 said:
Put recovery.img in adb folder and try again
Click to expand...
Click to collapse
There are two recoveries RECOVERY and RECOVERY2 within the UPDATE.APP. Is there a difference or should I extract both?

nexusyasuo said:
There are two recoveries RECOVERY and RECOVERY2 within the UPDATE.APP. Is there a difference or should I extract both?
Click to expand...
Click to collapse
Recovery enough noneed other
Just make suriu you put ul10 stock firmware in sdcard

I should also note that before the failed update, I was on stock recovery and with a locked bootloader. Maybe that is why?

nexusyasuo said:
I should also note that before the failed update, I was on stock recovery and with a locked bootloader. Maybe that is why?
Click to expand...
Click to collapse
Oh ofc then first unlock bootloader just enter information in huawei page and get a key and use it adb command line there is a guide also how to unlock. But now you cant access info of the phone youmight need to search it on the box.

arnas23 said:
Oh ofc then first unlock bootloader just enter information in huawei page and get a key and use it adb command line there is a guide also how to unlock. But now you cant access info of the phone youmight need to search it on the box.
Click to expand...
Click to collapse
Hi, the website requests that I need to login to Huawei Cloud for 14days? What should I do as the phone is in bootloop and I never used Huawei Cloud (I'm in Canada and could not login with my Huawei ID) before it was bootlooped. Huawei bootloaders are really annoying...

nexusyasuo said:
Hi, the website requests that I need to login to Huawei Cloud for 14days? What should I do as the phone is in bootloop and I never used Huawei Cloud (I'm in Canada and could not login with my Huawei ID) before it was bootlooped. Huawei bootloaders are really annoying...
Click to expand...
Click to collapse
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
This is a website for unlock key request i dont know i dont need to log in anywhere try this.

arnas23 said:
https://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
This is a website for unlock key request i dont know i dont need to log in anywhere try this.
Click to expand...
Click to collapse
Hi, I've tried the English website many times. I cannot get pass the Agreement part as every time it says server timeout. With the Chinese website I get to the part where I enter S/N IMEI but it requests that I log on for more than 14 days.

nexusyasuo said:
Hi, I've tried the English website many times. I cannot get pass the Agreement part as every time it says server timeout. With the Chinese website I get to the part where I enter S/N IMEI but it requests that I log on for more than 14 days.
Click to expand...
Click to collapse
Try to email them you can get serial number that way i think. For me english website working fine :/
http://consumer.huawei.com/en/contact-us/index.htm?tag=email
And this is your firmware i think:
http://consumer.huawei.com/nz/support/downloads/detail/index.htm?id=80047

I fix my huawei p8 gra l09 bootloop. First download dc phoenix make sure you have user and credit 15 and 8 for hcu to repair imei. On dc phoenix download flash file on dc support GRA-Ul00 mb 630 and flash via fastboot after flash huawei boot and enable usb debu and flash full via fastboot on dc phoenix and repair imei via hcu

UPDATE: I used DC Phoenix and managed to recover my phone. The experience was smooth and easy. I would recommend this site. Well worth the $15 as I didn't have to wait 14 days for Huawei's bootloader code.

Honor 6+ PE-TL10 Impossible to upgrade to Android 6 - Tried everything

My Honor 6 Plus is asian version I believe...
I upgraded it one week ago. Now I have Android 5.1.1, EMUI 3.1, (EMUI3.1_PE-TL10_6.1.1)
No root, No Bootloader
Ver. CUSTCHNC00D672
I tried following ROM Android 6.0 unsuccessfully!!
PE-TL10_C432B571 EUROPE
PE-TL10_C432B521 EUROPE
PE-TL10_C675B520 INDIA
PE-TL10_C10B520 RUSSIA
PE-TL10_C636B520 ASIA
It is impossible a upgrade to Android 6.0 and ROM Android 6 China version I didn't find...
Any solution for ROM Europe on ROM China?
Any help?

what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk

hamzio7 said:
what is your cust version
CXXXBXXX
???
Sent from my H30-U10 using Tapatalk
Click to expand...
Click to collapse
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now

caracal reloaded said:
My version now is EMUI 3.1 PE-TL10 6.1.1
CUSTCHNC00D672
ROM "PE_EMUI3.1_Android5.1_6.1.1.zip", that I downloaded right here... I cannot found the thread now
Click to expand...
Click to collapse
You have to find the correct build for your phone...
It has to end like this C00BXXX
Make sure that the region code most be the same
C00
Sent from my H30-U10 using Tapatalk

Looks like a Dev ROM to me. Your bootloader is unlocked?

My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..

caracal reloaded said:
My phone has always been stock. No bootloader, root, nothing... My current rom I found here. It seems official..
Click to expand...
Click to collapse
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?

goldfinv said:
You should unlock your bootloader and flash ROM via fastboot. That will upgrade your phone to 6.0. Would you like directions on how to do that?
Click to expand...
Click to collapse
Yes... sure!!
If it is the only way to overcome the regional limits.....
I think the phone will then rooted. Only that some banking app not works with rooted phone

caracal reloaded said:
Yes... sure!!
If it is the only way to overcome the regional limits.....
Click to expand...
Click to collapse
Check here to unlock bootloader
http://forum.xda-developers.com/honor-6/development/honor-6-rooting-method-t2962795
Then download Latest Full upgrade package for Honor 6 plus
http://www.hihonor.com/in/support/details/?DOC_ID=91145
Honor 6 drivers can be found here
https://androidmtk.com/download-huawei-usb-drivers
Download Huawei update extractor
http://forum.xda-developers.com/showthread.php?t=2433454
Extract Update.app from downloaded firmware.
Use Huawei update extractor to extract system.img, recovery.img, boot.img, Cust.img
Also, Copy update.app to dload folder on your SD card
Install adb and fastboot
http://forum.xda-developers.com/showthread.php?t=2317790
Power off phone. Hold vol down and connect USB to enter fastboot mode
Use the following command to flash the files on fastboot
Fastboot Flash boot boot.img
Fastboot flash recovery recovery.img
Fastboot flash Cust Cust.img
Fastboot flash system system.img
When completed, hold power, vol down, vol up till phone starts upgrade process.
Alternatively, use honor multi tool
http://forum.xda-developers.com/honor-6/general/honor6-multi-tool-t2963060
Use the unbrick option.

Why rom india?
Last Update is not 571 Europe?
I had try with multitool . Mode UNBRICK
cannot write.
For each file (boot, cust, recovery system)
FAILED (remote: Command not allowed)
I can try to install driver, install Hisuite, check on debug mode phone. But nothing
On boot screen "fastboot % rescue mode", I see "Phone Locked"
UPDATE
Impossible to get unlock code
https://emui.huawei.com/en/plugin/unlock/detail
correct data but "Verification Code error" on submit
I have a very strange serial number: "EMUI3.1_PE-TL10_6.1.1" ?!?!?!
I see another SN on Settings> About Phone and then "Status". It should be correct but does something not work (16 decimal numbers(0~9) or capital letters(A~Z)
always correct data but "Verification Code error" on submit

You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571

Write you soon. PC crashed

I sent PM
I am stuck
https://emui.huawei.com/en/plugin/unlock/detail
correct data but error message on submit "Verification Code error"

HELP
I've completed this step
Created Folder dload with ROM on phone
unlock bootloader (Honor Multi Tool with SuperSu folder on phone).
Unbrick with ROM for Europe B571 file (done, no problem)
NO TWM or ROOT
(Up to STEP 5)
Phone has rebooted.
Freeze on HONOR LOGO. STOP
I tried with VOL down, VOL up and power to flash ROM, but it fails (!!!)
Installing update stops at 4% : "Software install failed"
Any solution?
Now the phone is always turned on with logo HONOR and if I turn power off it restarts

goldfinv said:
You have to unlock bootloader before you can use fastboot mode to unbrick. The SN in settings - about - phone status is the right one. give it a try again or pm me needed details so I generate the unlock code for you.
ROM for Europe B571
Click to expand...
Click to collapse
For me, this ROM has reported problems. It could be the reason for the failed flash.
I do not think of being able to access the internal memory (with USB) to replace the ROM.
I thought that I can:
1) to performed hardreset (vol+-power, EMUI menu)
2) To put another rom on an external memory
3) Do unbrick again
What you think?
but I check now, Your rom is perfect.
I don't know what to do anymore

http://forum.xda-developers.com/honor-6/general/help-honor-6-unbrick-multi-tools-im-t3498406

Try to find EMUI4.0.1_PE-TL10_7.1.1 it is for your version of Honor 6 Plus PE-TL10. I flashed this version over PE_EMUI3.1_Android5.1_6.1.1. (PE-TL10 EMUI 3.1 Android 5.1) and works fine.

[ZE552KL/Z012DC] Canadian Thread - Unlock, Root, Update to Nougat

This thread will be for the Canadian version of ZE552KL, and will be updated with specific info relevant to Z012DC model found in Canada (Canada Computers, Staples, other retailers). It has WW SKU number.
It took me a while and some searching to figure all steps out. I also modified Asus N and M firmware to remove version checks. Without this step - i was stuck with error 7 in TWRP. The only difference between Z012D and Z012DC seems to be in Fastboot and ADB drivers, TWRP recovery, system images seem to work well so far.
Steps:
1. Download Fastboot and ADB Drivers. For me usb driver on ZE552KL Asus download page didn't work. Select "Only install driver", you do not need to update your drivers via DRP.
Fastboot driver (for Vendor VID_18D1&PID_D00D): http://drivers.drp.su/Telephone/Hua...03.00/Huawei-FORCED-Allx64-2.00.03.00-drp.exe
ADB Driver (for VID_18D1&PID_D002): http://drivers.drp.su/Telephone/Leshcat/WinAll/Leshcat-WinAll-drp.exe
2. Save the following files on your External SD Card:
Modified M image UL-ASUS_Z012D-WW-13.20.10.152-user.zip
Modified N image UL-ASUS_Z012D-WW-14.2015.1701.8-user.zip
SuperSU - latest version from here
no-verity-opt-encrypt-5-1.zip. Give thanks to @kaffeine1 , without him - we would all be stuck with black screens
3. Save ADB and Fastboot files on your computer, and extract; give thanks to @snowwolf725
4. Download newer recovery (TWRP 3.1.0) from here
5. Unlock bootloader via unofficial unlock method; give thanks to @snowwolf725
6. Get into fastboot by turning off the phone, and pressing volume up + power. Install recovery that you downloaded in step #4:
Code:
fastboot flash recovery twrp-3.1.0-0-Z012D.img
7. Follow the steps this guide by @kaffeine1 . Skip the steps of downloading Nougat and Marshmallow firmware from Asus site, as you have already downloaded and saved both firmwares in Step #2 . Also skip the last step - do not reboot into Nougat, but go back to fastboot mode.
8. Root Nougat - follow steps under #2 here:
https://forum.xda-developers.com/zenfone-3/how-to/twrp-recovery-3-0-2-root-zenfone-3-t3569926
How to update to the latest version of OS:
1. Go to Asus Site, download latest WW image UL-ASUS_Z012D-WW-14.2020.1703.28-user.zip
2. Extract UL-ASUS_Z012D-WW-14.2020.1703.28-user.zip\META-INF\com\google\android\updater_script , edit, remove first two lines, and put back into the zip file (e.g. using 7zip)
3. Extract from above zip file boot.img , and flash it via: fastboot flash boot boot.img
4. Flash recovery: fastboot flash recovery twrp-3.1.0-0-Z012D.img
5. Reboot into recovery, and flash:
- Firmware that you modified in #2
- no-verity-opt-encrypt-5.1.zip
- Latest SuperSU
- Rooted.zip (from step #8 above)
6. Reboot mobile, and enjoy new version!
Phone info as purchased:
Model Number: ASUS_Z012DC
Android version: 6.0.1
Baseband version: M3.10.42-Libra_080001
Build number: MMB29P.WW_Phone-13.20.10.152-20161222
Manufacture date (on the box): January 2017
Latest version - UL-ASUS_Z012D-WW-14.2020.1703.28-user.zip
Model Number: ASUS_Z012DC
Android version: 7.0
Baseband version: M3.10.47-Libra_080001
Build number: NRD90M.WW_Phone-14.2020.1703.28-20170410
Special thanks to:
- @jcadduono for TWRP recovery
- @snowwolf725 for guide unlock bootloader
- @kaffeine1 for guide how to upgrade to N from M

Reserved for future use

can i follow this step for ZE520KL ?

I got my self a canadian vertion ZE552KL, but i can´t seem to fully unlock the boot loader, it goes onto fastboot, but it does not allow me to flash anything it gives a permision denied .
when i tried to flash fw from sdcard gives a error: the the sku is "WW_" and mine is ""
have you came across this problem.
how can it be solved?
thanks

lastremnant said:
can i follow this step for ZE520KL ?
Click to expand...
Click to collapse
no, I do not think so. these are different phones.

DilipRB said:
I got my self a canadian vertion ZE552KL, but i can´t seem to fully unlock the boot loader, it goes onto fastboot, but it does not allow me to flash anything it gives a permision denied .
when i tried to flash fw from sdcard gives a error: the the sku is "WW_" and mine is ""
have you came across this problem.
how can it be solved?
thanks
Click to expand...
Click to collapse
try first flashing 6.0.1 firmware from asus site and then modified 7.0 firmware. if the error is when flashing 6.0 fw - try modified 6.0. and do paste specific rrror.

anterus said:
no, I do not think so. these are different phones.
Click to expand...
Click to collapse
nevermind sir, it worked for me

Strange things do happen!!!
anterus said:
try first flashing 6.0.1 firmware from asus site and then modified 7.0 firmware. if the error is when flashing 6.0 fw - try modified 6.0. and do paste specific rrror.
Click to expand...
Click to collapse
i was trying this because i wanted to upgrade fw to 7 and trying to unlock bootloader to flash twrp for backups...
I tried original Asus UL-ASUS_Z012D-WW-13.20.10.131-user and gave strange error after check... this fw is for "WW_Phone" and this phone is ""
but after reestart i got OTA updates... now my ZE552KL-Z012DC is in 7.0....
i can live with that, only problem for me is adb backups, i prefer twrp.
thanks
P.D. what pusles me is why getprop("ro.product.name") returns empty sting????

DilipRB said:
i was trying this because i wanted to upgrade fw to 7 and trying to unlock bootloader to flash twrp for backups...
I tried original Asus UL-ASUS_Z012D-WW-13.20.10.131-user and gave strange error after check... this fw is for "WW_Phone" and this phone is ""
but after reestart i got OTA updates... now my ZE552KL-Z012DC is in 7.0....
i can live with that, only problem for me is adb backups, i prefer twrp.
thanks
P.D. what pusles me is why getprop("ro.product.name") returns empty sting????
Click to expand...
Click to collapse
backup those zips, open with winrar or another app. open meta-inf/android/google/updater-script with notepad++ try deleting from ifelse until ) );
save and let winrar save new update

lastremnant said:
backup those zips, open with winrar or another app. open meta-inf/android/google/updater-script with notepad++ try deleting from ifelse until ) );
save and let winrar save new update
Click to expand...
Click to collapse
Tryed that, and got footer error...
seems that to modifying the script file and then recompresing will change the compretion check algorithem. giving a footer error.
i should try pakaging the apk again...
there was a program to do so but i cant recall which...
thks

DilipRB said:
Tryed that, and got footer error...
seems that to modifying the script file and then recompresing will change the compretion check algorithem. giving a footer error.
i should try pakaging the apk again...
there was a program to do so but i cant recall which...
thks
Click to expand...
Click to collapse
i found it ...
apktool from :
https://forum.xda-developers.com/showthread.php?t=1989533
Sorry this was for apks... but i guess same principle aplies... when i can i shall try and post the outcome

DilipRB said:
i was trying this because i wanted to upgrade fw to 7 and trying to unlock bootloader to flash twrp for backups...
I tried original Asus UL-ASUS_Z012D-WW-13.20.10.131-user and gave strange error after check... this fw is for "WW_Phone" and this phone is ""
but after reestart i got OTA updates... now my ZE552KL-Z012DC is in 7.0....
i can live with that, only problem for me is adb backups, i prefer twrp.
thanks
P.D. what pusles me is why getprop("ro.product.name") returns empty sting????
Click to expand...
Click to collapse
I noticed that in some cases TWRP doesn't "stick", and gets overridden by default bootloader. Specific check is essentially useless - just to prevent flash of improper image. Just remove the check in the new FW, or use modified FW that has the check removed. I think in your case you can just re-flash TWRP since your bootloader is unlocked?

I tryed several TWRP 3.02 and 3.10 if a boot imge ... if entered bootloader with volum key + power it says all ok but booting never happens... if i enter bootloader trough adb it stucks until i disconnect and reconnect usb cable. when trying to flash. fast boot returns error not have permision and side load error secttion 7 on UL modified or else footer w
error after passing check. i shall try modiffying UL 13.20.10 and see what happens

DilipRB said:
I tryed several TWRP 3.02 and 3.10 if a boot imge ... if entered bootloader with volum key + power it says all ok but booting never happens... if i enter bootloader trough adb it stucks until i disconnect and reconnect usb cable. when trying to flash. fast boot returns error not have permision and side load error secttion 7 on UL modified or else footer w
error after passing check. i shall try modiffying UL 13.20.10 and see what happens
Click to expand...
Click to collapse
flash modified images through twrp - with links in OP

Well my wife liked the phone so much, that she "kindly requested" me to gift it to her... now she is the proud owner of a canadian vertion of ZE552KL and i got myself a ZS570KL
thanks a lot for all your help.
P.D. : i think she was not happy with the time i was spending with the device.

I know this is going to sound super dumb, but the unofficial bootloader unlock still triggers the bootup message and voids the warranty, right?

This might be even dumber... But my guess is that the official app to unlock boot loader, does more than unlock,
My guess is that it also register with asus mobile, the fact that for your device has been unlocked...

DilipRB said:
This might be even dumber... But my guess is that the official app to unlock boot loader, does more than unlock,
My guess is that it also register with asus mobile, the fact that for your device has been unlocked...
Click to expand...
Click to collapse
That's what some manufacturers do, like Motorola and HTC. But from back when I unlocked the BL on my Zenfone 2 Laser, I remember that all it did (as far as I could tell) was unlock the bootloader and set a flag in the bootloader that made it say it was unlocked that couldn't be reversed. No need for fancy registration systems when you can just boot up the phone and take a look.

What was modified in your N-image firmware file? There is now a newer version that I'd like to install. Can you provide an updated modified file for version WW-14.2020.1703.28 or give the steps needed to modify it myself?

Jarrick said:
What was modified in your N-image firmware file? There is now a newer version that I'd like to install. Can you provide an updated modified file for version WW-14.2020.1703.28 or give the steps needed to modify it myself?
Click to expand...
Click to collapse
Updated OP with instructions regarding how to upgrade to the latest version of N - just tested steps myself. Should be applicable to all future versions of N posted on Asus site. Enjoy!

Zui 3.1.117st qpst file for [z2131]/[z2132] Chinese [android N][qpst]

Download the latest stable Chinese rom qpst file for z2 plus which is qfil flashable.
i found these file on club.lenovo.com.cn after two days of searching. i have flashed it in my lenovo z2 plus and it is working very well. it can be flashed with the qfil or mi flash tool. Download the rom from the given link below and follow the steps to flash.
https://club.lenovo.com.cn/thread-4259783-1-1.html
or
http://s.bs.zui.com/E82d
Seps:-
1. Download the latest rom from the given link .
2. Extract it in the C drive within a folder having very simple name like 'new'.
3. Install the flashtool and other required drivers from the link below.
4. Boot the phone into EDL mode.
5.. Use qfil to flash the file in the phone.
[note:- all data will be wiped so be sure to take backup before flashing.]
To download and use the qfil and other drivers follow the link below
http://https://forum.xda-developers.com/lenovo-zuk-z2/how-to/how-to-recover-hard-bricked-zuk-z2-plus-t3576007.
HOW TO BOOT IS THE EDL MODE[9008 PORT]
follow the steps in the link.
For bricked phone(tricky).
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/reboot-to-edl9008-modetotally-bricked-t3720932
If your phone is alive the follow these steps(easy method).
1. Enable developer option.
2. Enable usb debuging option.
3. Install latest adb driver from here.
4. Go to the directory where the adb driver is installed and inside the adb folder press shift and right click at the same time and then click on the option open command window here,
5. Type 'adb devices' these will pop a message in your phone accept it.now in the command window your device will be displayed.
6. Now type 'adb reboot edl' these command will reboot your device in the edl mode or 9008 port.
now every thing is wiped.
After first boot how to reach the home page and change the language of the phone.
just use the blue option at the top right corner of the screen and some common sense to reach the home screen.these will take you to the home screen every thing here is in the Chinese language so now we have to change it to English to do this follow the images.

Where is the rom link? and is flashing china rom (Z2131) on Indian device (Z2132) will help to relock the bootloader?

RajuMon said:
Where is the rom link? and is flashing china rom (Z2131) on Indian device (Z2132) will help to relock the bootloader?
Click to expand...
Click to collapse
It's a pretty old ROM now.
There is 3.5 QPST available. Even that too would receive official OTA builds as the latest for Z2 Plus is 4.0.xxx
Thanks.

Can I flash a Chinese rom in z2 plus and relock the bootloader?

RajuMon said:
Can I flash a Chinese rom in z2 plus and relock the bootloader?
Click to expand...
Click to collapse
Yes official Chinese room flashing can relock the bootloader

Thanks, mate this is the answer what I'm looking for:laugh:

I am using ARROW Os (pie), Now i want to get back to official stock rom with locked bootloader plox help me how to do so.
JUST now I HAVE FLASHED Lenovo_Z2_Z2132_Q01017.1_M_ZUI_2.0.093_ST_160811_QPST with QFIL and it is showing error ownload Fail:Sahara Fail:QSaharaServer Fail:The directory name is invalid. plz help me

hilarioustiwari said:
I am using ARROW Os (pie), Now i want to get back to official stock rom with locked bootloader plox help me how to do so.
JUST now I HAVE FLASHED Lenovo_Z2_Z2132_Q01017.1_M_ZUI_2.0.093_ST_160811_QPST with QFIL and it is showing error ownload Fail:Sahara Fail:QSaharaServer Fail:The directory name is invalid. plz help me
Click to expand...
Click to collapse
Do you connect your phone to 9008 port

[GUIDE] Root Huawei Honor 8 SMART and install TWRP custom recovery (EMUI 5.X)

Note-
Applicable for Windows 7, Windows 8 and Windows 10
Similar steps are applicable for EMUI 4.X as well but TWRP file will change.
Hello Fellow Members,
Did not find any post mentioning rooting for Honor 8 SMART and got requests via PM and on FB to add it for EMUI 5. If there are any, let me know and I will take down this thread. I will just simplify the steps so that any new users can do this without any problem and without any prior experience to rooting, it may be long but will be the simple enough for all the users.
Prerequisites-
Enable the developer option in settings-
Go to Settings--> About Phone-->Tab build number 7 times to enable this setting.
Go back in setting page, just above system update, you will see a new menu as -Developer Options
Scroll for the debugging section and enable the USB Debugging
You will be prompted for the confirmation with RSA key, just accept it.
Enable OEM Unlock in Developer Options (just above the USB debugging option) – Most probably this option will not be there on EMUI 5.0 (only few have seen on EMUI but it was there on EMUI 4.1 for all but rarely on EMUI 5.0 or may be because I have used dload most of the time which grayed out this)
Please note down you build number, this may become handy in case something goes wrong to restore your phone via DLOAD. In Settings- About phone- Build Number
Installation of required Drivers.
Connect your phone to PC and install Hi Suite on PC and it will additionally install all the necessary drivers to PC and HiSUite on Mobile.
Download and Install ADB from Link
Accept all the prompts and install ADB drive system wise.
Once installation is completed, if default options are chosen, it will be under C:\adb
Downloading the necessary files.
Download TWRP from Link Thanks to @OldDroid for his Original Thread . Rest of the contributor and credit in original thread by OldDroid.
Move the downloaded file under C:\adb or wherever you have installed the ADB.
Download the SuperSU file from this Link and put it in SD card or keep handy on PC so that you can copy to internal memory later.
Get the unlock as mentioned in this thread
Actual Procedure
Unlocking the bootloader-
Backup all your data as unlocking the bootloader will reset the device and all your data will be erased.
On windows machine, go to folder C:\adb or wherever you installed the adb drivers.
Press shift+right click together and select Open command prompt here
Run - adb reboot bootloader (this command may prompt for acceptance of RSA key if not already accepted)
This will boot the phone into bootloader mode.
Run - fastboot oem unlock <16 digit unlock code- Put your actual code you obtained from Huawei site > (This step will unlock the bootloader and will erase all your data)
Phone will restart automatically.
Installing TWRP
Once on the system, open the PowerShell or command prompt again in ADB folder (can use the previous instance as well)
Run - adb reboot bootloader
Once in bootloader, Run - fastboot flash recovery twrp-3.1.1-0-venus.img (This will install the TWRP recovery for EMUI 5.0 on your phone)
Once done with the flashing the TWRP, Run - fastboot reboot
Rooting
Once booted to system, open the PowerShell or command prompt in ADB folder (can use the previous instance as well)
Run - adb reboot recovery
And your phone will boot into the TWRP recovery.
Copy the SuperU file downloaded to SD card or Internal memory.
Install the SuperSU zip.
Reboot and enjoy.
Happy Flashing.

I have try,but it doesn't work.

Snoopys Woodstock said:
I have try,but it doesn't work.
Click to expand...
Click to collapse
One of the user, imssk has tried this and worked fine for him without any problem. What is the error you are getting

Cool thanks. Different question: Why honor does not provide monthly or 3 months security updates.Very disappointed with them. I know we are not getting Oreo update but atleast provide security update in at least three months.

please help me sir im aniket from india ive rooted the phone accordingly but i made a mistake while formatting from twrp and lost encryption and then i formatted the whole os and as downloaded the stock firmware from official consumer huawei site the rom doest gets flashed i even tried flashing by extracting the update.app file but still the system file wont flash and fails every time please help me as sson as possible

Aniket02141 said:
please help me sir im aniket from india ive rooted the phone accordingly but i made a mistake while formatting from twrp and lost encryption and then i formatted the whole os and as downloaded the stock firmware from official consumer huawei site the rom doest gets flashed i even tried flashing by extracting the update.app file but still the system file wont flash and fails every time please help me as sson as possible
Click to expand...
Click to collapse
Flashing via twrp or dload method?

Custom ROMs?
Hello I have been searching for custom ROMs for ven-l22 but haven't found any. Would you know of any? Thanks.

Babakkardan said:
Hello I have been searching for custom ROMs for ven-l22 but haven't found any. Would you know of any? Thanks.
Click to expand...
Click to collapse
Use p9 lite ROM. It will work

Thanks that is very useful.
Is USB otg working on this phone?

Babakkardan said:
Thanks that is very useful.
Is USB otg working on this phone?
Click to expand...
Click to collapse
With custom ROM and root, yes.

Huawei disabled the site.
I sent them email and they refused to give me a key I am their customer.I paid them.How can I unlock it?

VFR99 said:
I sent them email and they refused to give me a key I am their customer.I paid them.How can I unlock it?
Click to expand...
Click to collapse
Via paid services like dc unlocker, Chimera tool, HCU client etc.

I don't want to pay
shashank1320 said:
Via paid services like dc unlocker, Chimera tool, HCU client etc.
Click to expand...
Click to collapse
It was free now why should I pay?Come on they are a dumb company.

VFR99 said:
It was free now why should I pay?Come on they are a dumb company.
Click to expand...
Click to collapse
Well thats something i cant comment
They have stopped providing the code long back

shashank1320 said:
Well thats something i cant comment
They have stopped providing the code long back
Click to expand...
Click to collapse
It's not your fault