I'm looking for a script that will turn USB to PC "Advanced Networking" ON when going into ICS and then turn it OFF when you leave ICS...
I'm sure this is fairly simple to do but I just don't know enough about mortscript to do it.. anyone know of such a script? Even if it's not possible to integrate it into ICS (from communications window) just a script that could be executed to toggle on and off would be great.
Galaxy Tab, Android why does it have TCP/1720 open by default?
hey just like that, I've just done a TCP/UDP scan and turns out it found that port open, was wondering if anybody knows:
a) what this port is used for
b) can we disable it or turn on the firewall settings
thanks!
Read below. Has something to do with videocalls.
http://www.1pcn.com/customer_service/support/firewall/port_forwarding.htm
Hey guys,
I spent all night trying to reenable USB on my device. Rebellos and I have been designing bootloaders and screwing with settings which are not normally accessed. So somehow I put my device into MODEM mode so it would try to connect to the computer as a data device instead of a camera/phone. I was seriously thinking my device was borked because I've been working inside it... and while it's a Samsung, it's not totally bulletproof.... So, to make matters worse, some asshole posted an invalid hidden code all over the internet to access factory mode on the Galaxy Camera.
Here's how you access factory mode and change your device between a normal camera and modem. Every other guide on the internet is wrong.
1. Install Nova Launcher from the market
2. hold on the launcher screen until a menu pops up.
3. select shortcuts
4. select Activities
5. select Factory Mode
6. Select Factory Mode FactoryCTRL
7. launch the Factory Mode shortcut you just created
8. use this thread http://forum.xda-developers.com/showthread.php?t=1894102 to locate codes for your device.
I fixed my device with the *#7284# -- Phone Utility (USB Settings) code. Both should be set to PDA.
This technique should work for EVERY device. The codes will vary, but you should be able to access factory modes.
This is very useful information!
I don't see the thanks button.
But anyway, any luck on getting the device to make / receive calls / texts? Or print money at least?
Thank you.
Nevermind....not reading through
AdamOutler said:
Hey guys,
I spent all night trying to reenable USB on my device. Rebellos and I have been designing bootloaders and screwing with settings which are not normally accessed. So somehow I put my device into MODEM mode so it would try to connect to the computer as a data device instead of a camera/phone. I was seriously thinking my device was borked because I've been working inside it... and while it's a Samsung, it's not totally bulletproof.... So, to make matters worse, some asshole posted an invalid hidden code all over the internet to access factory mode on the Galaxy Camera.
Here's how you access factory mode and change your device between a normal camera and modem. Every other guide on the internet is wrong.
1. Install Nova Launcher from the market
2. hold on the launcher screen until a menu pops up.
3. select shortcuts
4. select Activities
5. select Factory Mode
6. Select Factory Mode FactoryCTRL
7. launch the Factory Mode shortcut you just created
8. use this thread http://forum.xda-developers.com/showthread.php?t=1894102 to locate codes for your device.
I fixed my device with the *#7284# -- Phone Utility (USB Settings) code. Both should be set to PDA.
This technique should work for EVERY device. The codes will vary, but you should be able to access factory modes.
Click to expand...
Click to collapse
So why or what is the reason for factory mode? In other words, what do we gain by doing this?
what purpose ?
"I fixed my device with the *#7284# -- Phone Utility (USB Settings) code. Both should be set to PDA. "
Sounds feasable to me to at least have the option available
Nice and TKS
ijof9 said:
I don't see the thanks button.
But anyway, any luck on getting the device to make / receive calls / texts? Or print money at least?
Thank you.
Click to expand...
Click to collapse
LOL .... Print Money !! LOL:laugh:
Ir0nsh007er said:
LOL .... Print Money !! LOL:laugh:
Click to expand...
Click to collapse
thanks so much
Hiya, just curious:
Are you using Nova Launcher just to get access to a dialler?
Thank you.... still can't see a USB mode though
Hi,
New member here and I want to thank you for the link for the code and the tip on using Nova to unlock more stuff from the SGC.
I did what you instructed above but saw that my device already had PDA chosen by default and I still can't see the USB Utilities on my Settings window, nor can I move apps from device to SD.
My SGC only has a few apps installed beyond the factory installed ones. Probably 5 utility and browser apps and about 10 games (kiddie ones like Angry Birds, Cut the Rope, Minecraft) etc. and it's already running out of device storage space.
Is it possible to have the enable USB mode? Thanks
davidleetong said:
My SGC only has a few apps installed beyond the factory installed ones. Probably 5 utility and browser apps and about 10 games (kiddie ones like Angry Birds, Cut the Rope, Minecraft) etc. and it's already running out of device storage space.
Is it possible to have the enable USB mode? Thanks
Click to expand...
Click to collapse
use GL to SD
the code via calculator works in getting into factory mode..
If the connected Camera is listed as being in MODEM mode, you should also be able to connect to it via terminal and using AT commands to set factory mode and available windows "ports". (MODEM, PHONE/PDA, etc.) These AT commands are (modem firmware) device dependent... So unless someone tell me the BP/CP chip used in this device (or send me the modem.bin), I can't tell you which AT commands to use.
=================== update ===================
I've found that they use the XMM 6260 as detailed in the THIS post. So If you're very brave in experimenting with these connections, you may want to look into this command:
Code:
AT+XSIO -- Configuration trace and modem (AT) interfaces
[ ONLY do this if you are not afraid of loosing PC connection to Camera! ]
This was a VERY useful post! Thanks! :good:
sorry to revive an old thread, but it seems my GC keeps going back to MODEM mode after a second soft reset. Is there any way to fix this?
thanks in advance,
Great information! Thanks for sharing.
I get a Galaxy NX for 310€ i think for this Price i can try it, when i dont like it's a nice Present for my Girlfriend.... First i try i think nice Android Device nice Display but not a comparison to my Canon 5D in the Night i install some Apps like Cinema FV-5....guys i now nobody intrested in this Device but it's realy Outstanding as a Videographer this is the best ****ing DSLR ive ever seen buying expensive Wireless Microphones? no more i use Bluetooth Video Recording with very high Bitrates ...byebye external Atomos Recorder! Have anyone here an Idea to get Android 5 or a Way to install a modified Camera App that can Record Raw Video or how i can recognize a HD for external Recording or a soundcard over the USB Jack? I dont found anything about this ****ing Dream Thing (((
Thanks !
Great info
Just wanted to share this with you all.
I found a way to bypass hdcp (drm)
First enable developer mode
then activate simulated second view (protected)
Launch the app that blocks hdmi out
connect hdmi cable
press the home button
go back to dev options and disable second view simulation
go back to the app
Bingo...
Penguin_be said:
Just wanted to share this with you all.
I found a way to bypass hdcp (drm)
First enable developer mode
then activate simulated second view (protected)
Launch the app that blocks hdmi out
connect hdmi cable
press the home button
go back to dev options and disable second view simulation
go back to the app
Bingo...
Click to expand...
Click to collapse
crazy... but nice....
making smartphone camera stream live feed to laptop
Hello,
I'm looking to be able to capture a live feed (I.e. web cam or cctv function) from a smartphone to my laptop via usb 3.0
I'm leaning towards the galaxy s5 as its video camera has all the features I need. Just the one hang up with the hdcp.
I have video capturing software that requires the laptop to recognize the camera as an imaging device in device manager.
Any thoughts on work arounds for this to happen?
Thanks in advance.
August 2020 and I confirm, this still works.
Thank you so much
doesnt work anymore
So I have an app which forces you to disable ADB debugging in developer menu (Charter Spectrum TV streaming app).
Is there a way to "fake" the status so it is enabled but the apps sees it as off?
To answer my own question, I installed xposed and this:
http://repo.xposed.info/module/com.redlee90.hideusbdebugging
It hides USB from apps and works with the new Spectrum app (which came from the old TWC app which was known to mess with ADB)
I am having this issue too, any idea if there's a way around without xposed?