Hi Guys,
is there any chance to change the behavior of the alert slider back like it was in Oreo?
I want to have DND mode on top position instead of silence mode.
Thanx alot.
rage302 said:
Hi Guys,
is there any chance to change the behavior of the alert slider back like it was in Oreo?
I want to have DND mode on top position instead of silence mode.
Thanx alot.
Click to expand...
Click to collapse
..no idea? no one? ....too bad
+1, annoying, in meetings I reach the slider in my pocket, it always get into silence since its virtually ''easier'', and forgot it, so I miss calls....
At the beginning, its not instinctive to use the slider like in Oreo ''sound> silent > vibr'' VS Pie '' sound>vibr>silent'', but they did it for a reason. And that reason is probably because most people wont use the silent mode.
So far I get use to it, and carefully adjusting the slider to the center, and take a few click or look at it to be sure.
but yeah, I wish I can go like oreo. Probably a simple flashable zip can fix this, but dont know where to look.
Related
Hi All
I did a few searches throgh this forum but couldn't find the answer I was after. Basically I'm after some way to cut off or override the sound of notifications while the phone is in my pocket. I had thisfeature on my Atrix using MIUI so unsure if it's a feature/option relating to MIUI itself but would very much like the same functionality using the i9505. Does anyone know how I might achieve this?
Thanks in advance
fmflex said:
Hi All
I did a few searches throgh this forum but couldn't find the answer I was after. Basically I'm after some way to cut off or override the sound of notifications while the phone is in my pocket. I had thisfeature on my Atrix using MIUI so unsure if it's a feature/option relating to MIUI itself but would very much like the same functionality using the i9505. Does anyone know how I might achieve this?
Thanks in advance
Click to expand...
Click to collapse
If you're looking to turn off the notification sounds (or change the volume) click one of the buttons for volume and click the gear the the right of the volume bar and then you can change the ringtone , media , notifications and system.
Hi, thanks for the reply, That's not exactly what I'm after.
Basically when you have a notification going off and you drag the notification bar down, it'll cut out the sound. I used to be able to hit the power button when my Atrix was in my pocket and it would do the same thing. I'm just looking to be able to do the same thing with the S4.
Hello all
I seem to have a spot of bother, I had two notifications on my device.
I Long Pressed the notification until the screen changes, Giving you a option to Snooze or press the little "i" button.
When you press Snooze, how the hell do you get your notification back?
I use Rotation to force all into Landscape.
I done the Snooze on the apps notification, and i cannot get it to re-appear, I use the notification as a quick toggle to change from Force to Auto
I also done it on ShareKM
and i cannot get neither of them Back.
Even when i go to:
Settings / Sound & Notification / App Notifications
WHen i configure to allow Heads up etc, Still nothing.
Not even after a reboot.
Its obviously not a Snooze button, its more of a Here hide this notification FOREVER!!!
Anyway has anyone got a little more experience with how this works?
I dont want to have to re-flash for the sake of 2 notifications lol
Screenshot
Bumping because I'm having the same problem on my lg g2 with resurrection remix lollipop rom. Feels like I've tried everything with no success.
qrsl26 said:
Bumping because I'm having the same problem on my lg g2 with resurrection remix lollipop rom. Feels like I've tried everything with no success.
Click to expand...
Click to collapse
Ever figure this out I did the same thing with tasker, and feel really stupid right now.
ERIC
egandt said:
Ever figure this out I did the same thing with tasker, and feel really stupid right now.
ERIC
Click to expand...
Click to collapse
Nope never found a fix. I eventually just re flashed the ROM because I disabled SMS notifications and didn't have a choice. Now I'm being very careful around that button.
qrsl26 said:
Nope never found a fix. I eventually just re flashed the ROM because I disabled SMS notifications and didn't have a choice. Now I'm being very careful around that button.
Click to expand...
Click to collapse
Bummer, guess that will be me as well
unsnoozing notifications
I suppose this is too late, but perhaps it can help someone else. I found the option to remove the notification snooze (or filter) under privacy.
Go to settings, privacy, and then filter notifications. You'll need to delete the app in the list. I had to reboot for my changes to take effect.
I'm currently thinking of a remapping app (remapping as in changing a physical button's output) , but I do not own a oneplus two. Can somebody tell me what the alert slider's keycodes are?
If any of you is willing to help but do not know how to find such info, I attached an apk (that I built from an open source code) to this post. Please install and open the app then change the alert slider state, screenshot the output then send them to me. Also, please state what ROM version you are running.
When the app is finally released to an xda thread, I'll list all the testers there of course.
P.S: The Alert Slider is that new hardware slider that changes sound profiles, in case you didn't already know
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Swatto86 said:
Here is the screenshot, hope it helps, makes sense to have the silent mode in the down position.
Click to expand...
Click to collapse
Swapping the "none" profile and "all" profile was exactly what I was thinking.
Can you please tell me what the output of the other states of the slider was?
EDIT:What you actually sent me was the mapping of the back button
is it possible to map it so loud, vibrate and silent
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
That is what I am trying to achieve. If you own a One Plus Two, please download and install the apk and send me the screenshots after you toggle each alert slider state
The app does not do anything when toggling alert slider unfortunately.
Swatto86 said:
The app does not do anything when toggling alert slider unfortunately.
Click to expand...
Click to collapse
Wow, that is a very unexpected result ._. I'll have to look into the source code then.
Thanks a lot everyone
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
morback said:
This would be genius !
I'm ready to be your beta-tester
OPT with OxygenOS 2.0.2 with Xposed here.
Click to expand...
Click to collapse
yakuzlin said:
Would be great if we could reverse the mappings, so instead of all notifications with the slider being all the way down it would be all the way up for all notifications.
Slider up: All notifications
Slider middle: Priority
Slider down: Silent
Click to expand...
Click to collapse
Kito92 said:
Strange idea, but what if for each slide matched a battery profile, like battery saver, balanced, performance?
Click to expand...
Click to collapse
I thought about having multiple layout options : battery modes;CPU governors; rotation change etc..
However I still haven't found the alert slider mapping file :/ This is becoming quite frustrating
Will have my OPT soon and will do anything I can to help out with this. Think the All/Priority/None options are not useful at all.
its taking a lot of time ...attached img is for priority ..ie key in d middle..
RulerAk said:
its taking a lot of time ...attached img is for priority ..ie key in d middle..
Click to expand...
Click to collapse
Wow, thanks! How about the two other states? none and all ?
For all its f8(not 100% sure) .... It's takin a looot of time n not recording for d other one..... May b cause m not rooted yet
Sent from my ONE A2003 using XDA Free mobile app
I really hope this works. Good luck on this
The one plus two slider doesnt work with keycode's
toonvanstrijp said:
The one plus two slider doesnt work with keycode's
Click to expand...
Click to collapse
Would you happen to know how it behaves?
thetechnologician said:
Would you happen to know how it behaves?
Click to expand...
Click to collapse
Any updates on this ? Very interested
merewood bebox said:
is it possible to map it so loud, vibrate and silent
Click to expand...
Click to collapse
I made an app for it. Try play.google.com/store/apps/details?id=com.nqk.vibratemode (sorry, I need to post 10 posts in order to embed the link
You just need to follow the instruction and enjoy the vibration.
Hi everybody ! I have an awful problem with the alert slider of my OP2. it is totally broken, can't use it anymore. when it worked it was in Do Not Disturb and now it is locked in DND too... what can i do?
just because i can put in dnd/mute/all with the volume buttons i use a custom rom.
IS THERE ANY CHANCE TO DISABLE THE ALERT SLIDER? AND DO ALL THE MUTE/VIBRATE/ALL STUFF WITH THE VOLUME BUTTONS?
Looking forward to your reply. thank you!
manepop98 said:
Hi everybody ! I have an awful problem with the alert slider of my OP2. it is totally broken, can't use it anymore. when it worked it was in Do Not Disturb and now it is locked in DND too... what can i do?
just because i can put in dnd/mute/all with the volume buttons i use a custom rom.
IS THERE ANY CHANCE TO DISABLE THE ALERT SLIDER? AND DO ALL THE MUTE/VIBRATE/ALL STUFF WITH THE VOLUME BUTTONS?
Looking forward to your reply. thank you!
Click to expand...
Click to collapse
Put a custom rom and change the alert slider settings. Put top position as none.
utkarsh102 said:
Put a custom rom and change the alert slider settings. Put top position as none.
Click to expand...
Click to collapse
if i do so , when i change to stock rom(oxygen os) i'll be able to mute from volume buttons?
manepop98 said:
if i do so , when i change to stock rom(oxygen os) i'll be able to mute from volume buttons?
Click to expand...
Click to collapse
No. I meant change your rom and not go back to stock. But as far as i remember, didn't oos also an alert slider settings?
utkarsh102 said:
No. I meant change your rom and not go back to stock. But as far as i remember, didn't oos also an alert slider settings?
Click to expand...
Click to collapse
none that i can use for my problem
manepop98 said:
none that i can use for my problem
Click to expand...
Click to collapse
What none?
utkarsh102 said:
What none?
Click to expand...
Click to collapse
these are the only options related to the alert slider. none of these options can help me. only if someone knows tasker/ xposed module what can solve this..
manepop98 said:
these are the only options related to the alert slider. none of these options can help me. only if someone knows tasker/ xposed module what can solve this..
Click to expand...
Click to collapse
Did you try pressing tge volume up button again and again? That works for me to get out of the do not disturb mode. Also there is a QS tile for do not disturb. Try tgat.
utkarsh102 said:
Did you try pressing tge volume up button again and again? That works for me to get out of the do not disturb mode. Also there is a QS tile for do not disturb. Try tgat.
Click to expand...
Click to collapse
what you are saying is working just for custom ROMs.. but i need to tweak OOS.
Thank you, anyway.
https://forum.xda-developers.com/on...p-custom-slider-root-xposed-required-t3477444
utkarsh102 said:
https://forum.xda-developers.com/on...p-custom-slider-root-xposed-required-t3477444
Click to expand...
Click to collapse
sadly, it doesnt work for OOS 3.5.6 / 3.5.8
Hi all
It seems that the only way to get ring volume switched to vibrate only, is via the switch on the left side of the phone? I understand that this is the intended method, but that vibrate only cannot be configured in the regular profile shocks me?
The silence mode features an icon in the status bar, and enforces a whole set of other options, really? I understand that the switch is a design decision, but that is in no way the same to me as taking away regular well known usage of any android phone since dawn of time - the vibrate option in the normal 'volume profile'....
Any input on this? Am I missing something, or am I the only one having an issue here?
The lack of swipe across status bar to lower screen brightness is a different thing, but I'm sure developers will bring this back, at least with a custom kernel (EX for example).
Kind Regards
Seems like I'm the only person who cares :laugh: Or the thread just drowned :highfive:
TwinAdk said:
Seems like I'm the only person who cares [emoji23] Or the thread just drowned :highfive:
Click to expand...
Click to collapse
LOL, I think so ?. Personally I love this change.
Sent from my ONEPLUS A5000 using Tapatalk
I'll Growler to like it... I'm pretty sure..
Actually there's this app that can do this without you touching the switch. Sound Profile. I have no idea what makes it work but it does.
Now if only I could make Tasker do this...
wondering the same, had a similar problem, see https://forum.xda-developers.com/showthread.php?t=3629258
Solved it with tasker.
Trigger "silent ~ off" -> set a non empty ringtone.
trigger "silent ~ on" (this is true for dnd and silent mod): change ringtone to empty (silent) ringtone
I came across the same question and the only way I've found to enable silent/ vibrate mode without the slider is using a widget.
Ok, the attatched screenshot is a catlog of things happening when switching from silent to do not disturb. Notice the easily recognized event at the top, ThreeKeyHW.. That's whats triggering all the following actions. This can be intercepted by Tasker, and manipulated with :good:
Attatched screenshot
On having Tasker read or react to logcat content.
https://www.google.dk/amp/s/amp.red...nts/62gdx2/is_there_a_tasker_plugin_that_can/
TwinAdk said:
On having Tasker read or react to logcat content.
https://www.google.dk/amp/s/amp.red...nts/62gdx2/is_there_a_tasker_plugin_that_can/
Click to expand...
Click to collapse
why bother reading logcat (which might eat your battery)? for me, testing two variables in tasker allows me to determine the switch position:
%SILENT ~ off we are loud
%SILENT ~ on and %VOLR!=0 we are in dnd
%SILENT ~ on and %VOLR = 0 we are in silent mode
pen² said:
why bother reading logcat (which might eat your battery)? for me, testing two variables in tasker allows me to determine the switch position:
%SILENT ~ off we are loud
%SILENT ~ on and %VOLR!=0 we are in dnd
%SILENT ~ on and %VOLR = 0 we are in silent mode
Click to expand...
Click to collapse
You have more Tasker experience than I do :laugh:
Question, in your opinion, is any other tasker alternative worth spending money or time on, or is it just a matter of learning Tasker? My point being that Tasker is THE tool - but also quite difficult to manage at times... Hard to navigate in, I personally believe. But on the other hand, it can do ANYTHING, which you cannot say about ANY of the alternatives...
TwinAdk said:
You have more Tasker experience than I do [emoji23]
Question, in your opinion, is any other tasker alternative worth spending money or time on, or is it just a matter of learning Tasker? My point being that Tasker is THE tool - but also quite difficult to manage at times... Hard to navigate in, I personally believe. But on the other hand, it can do ANYTHING, which you cannot say about ANY of the alternatives...
Click to expand...
Click to collapse
Hi,
no, not more experience, but I found a posting for a similar question for the oneplus 3 where someone suggested testing the %INTERRUPT variable to determine if it is on value "priority" (meaning it is in dnd mode). I tested this and just created a task that shows a flash message with a number of variables of which I thought they could be interesting. Turned out that INTERRUPT was never set, but this is how I found out about SILENT and VOLR.
Regarding tasker alternatives: I haven't used an automation tool for maybe three years now, before I had only done simple stuff with tasker, so it was my first pick and it worked nicely - so I cannot say anything about alternatives...
me personally would love just bottom to top: all, vibrate only, nothing. no DND etc. another thing that bothers me is that when in silent/vibrate, I can't get Textra to use a certain pattern for messages coming in. oos defaults to two little vibrations. any ideas?
Sent from my ONEPLUS A5000 using XDA Labs
stooyleown said:
me personally would love just bottom to top: all, vibrate only, nothing. no DND etc. another thing that bothers me is that when in silent/vibrate, I can't get Textra to use a certain pattern for messages coming in. oos defaults to two little vibrations. any ideas?
Click to expand...
Click to collapse
Tasker. If status dnd and sms - vibrate
This annoyed me too.... I've done as people have suggested just switched the profile to "none"
TwinAdk said:
Tasker. If status dnd and sms - vibrate
Click to expand...
Click to collapse
well if ya have a profile, would ya mind sharing? :good:
Sent from my ONEPLUS A5000 using XDA Labs
stooyleown said:
well if ya have a profile, would ya mind sharing? :good:
Click to expand...
Click to collapse
I don't sorry ? if I had I would :good:
Is there no one here that can actually help with this? People just keep leaving short oneliners without any substance ("Just apply the thingy and it'll work"). It's not helpful, it's just frustrating as **** since none of us others get this to work.
If you do know how to do this, for real, then share your XML for your profile and/or tasks. Or write up a step by step.
rage77 said:
Is there no one here that can actually help with this? People just keep leaving short oneliners without any substance ("Just apply the thingy and it'll work"). It's not helpful, it's just frustrating as **** since none of us others get this to work.
If you do know how to do this, for real, then share your XML for your profile and/or tasks. Or write up a step by step.
Click to expand...
Click to collapse
Over the past days I've gained Tasker knowledge to do this. How would people want it to work, I'll try!