Hello everyone
Last week I bought my Samsung Galaxy Grand 2 SM-g7102, but I have a problem. I already inserted two sim cards inside the 2 slots, but the problem is when I turn on my phone it uses SIM 1 only it should be sim 1 and sim 2. I dont know what to do, help me please. Thanks
JoyLobo said:
Hello everyone
Last week I bought my Samsung Galaxy Grand 2 SM-g7102, but I have a problem. I already inserted two sim cards inside the 2 slots, but the problem is when I turn on my phone it uses SIM 1 only it should be sim 1 and sim 2. I dont know what to do, help me please. Thanks
Click to expand...
Click to collapse
Navigate to setting=>device=>sim card manager=> select sim2 to active.
I am continually getting a message requiring me restart the phone. I have reinstalled the firmware with no positive results. I think the sim slot is okay. My phone is out of warranty. I am attaching a screen shot. I get it several times a day but no clear trigger. Any ideas?
AT&T galaxy s4 i377 nb1 stock rooted.
Hi there,
First of all you must give us more details about your device/ROm and so on for a better answers or pointing.
Second, did you try it to contact your operator for change that SIM? Maybe its damaged.
Good luck
R_a_z_v_a_n said:
Hi there,
First of all you must give us more details about your device/ROm and so on for a better answers or pointing.
Second, did you try it to contact your operator for change that SIM? Maybe its damaged.
Good luck
Click to expand...
Click to collapse
It is a AT&T galaxy s4 i377. It has stock nb1 firmware. It is rooted with towel root. I have reinstalled the the firmware hoping to fix but no luck. I have switch the sim. I want to know if this is a know issue for the s4 and if there is a fix.
Then please wait until mods will move this thread to the right device forum.
Stand by
On the pack writeen " american sim card only "
When i put the sim card , it require unlock code
Here is the details of my mobile phone :-
Model Number : Samsung Galaxy Note 4 N910H
Serial Number : Xxxx
IMEI Number : xxxxxx
I don't have us sim card to make a call over 5 minutes to unlock the phone
Anyone know ? I already contact alot of samsung service but they also said : please contact your store or seller.
Please help me
hlcm151 said:
On the pack writeen " american sim card only "
When i put the sim card , it require unlock code
Here is the details of my mobile phone :-
Model Number : Samsung Galaxy Note 4 N910H
I don't have us sim card to make a call over 5 minutes to unlock the phone
Anyone know ? I already contact alot of samsung service but they also said : please contact your store or seller.
Please help me
Click to expand...
Click to collapse
First of all remove your imei from your post it's not safe for u.
jdomadia said:
First of all remove your imei from your post it's not safe for u.
Click to expand...
Click to collapse
Please delete your quote
Thank you
Hello, i need the stock rom for Huawei P8 lite because in my country the carrier sells the phone with the second sim disabled from rom software.
I just need the stock rom to replace it.
Thx in advance.
//Edit:
How to enable dual sim:
1. Download ROM: https://mega.co.nz/#!rcFDzZSa!V1zxHlmSqIvhF1_FjIOsyu762s8ZURmYDRtxcQeDyI0
2. Read the instructions in the archive which you have downloaded. Pay attention!!! You must flash the second file also - that enables dual sim.
3 If u followed the instructions corectly u should have dual sim.
Many thanks to @kjartandi !!!
Official downloads if anyone needs it: consumer.huawei.com/at/mobile-phones/support/downloads/p8lite-at.htm
Here are the official downloads
official downloads: consumer.huawei.com/at/mobile-phones/support/downloads/p8lite-at.htm
@kjartandi does this rom is for dual sim version of the phone? because i need the stock rom which has the dual sim integration. my phone comes from the carrier with single sim rom software
Is your p8lite dual sim? Did you test it with nano and micro sim?
Thx in advance.
kjartandi said:
Hi! Yes, when you flash the files in the Step2 folder, it should enable the dual sim!
Click to expand...
Click to collapse
@kjartandi many many thx :laugh::laugh::laugh:
I CONFIRM THE ROM ENABLES DUAL SIM for P8LITE (ALE-L21) which come from the carriers with second sim disabled like ORANGE RO
permanent link of the files of kjartahandi: https://mega.co.nz/#!rcFDzZSa!V1zxHlmSqIvhF1_FjIOsyu762s8ZURmYDRtxcQeDyI0
Cris4524 said:
All single sim models can enable the second SIM slot by firmware update?
Click to expand...
Click to collapse
theoretically yes beacause all p8lite are dual sim by manufacturer
hello. i followed the same steps and the results are following:
-P8Lite Orange RO, single sim so called variant
-Flashed the ROM via tutorial, Step1 and then Step2.
- ROM has now dual card(sim) management enabled. Upon start it requieres 2 PIN's, each for every sim.
Only SIM1 has signal, sim2 has absolute no signal. When sim1 is disabled from dualcard management only then sim2 has signal. did a reset, started from scratch, same story.
is there any way to resolve this. to make it completely Dual Sim Full Active, as it should be from Huawei. The Huawei P8lite codename is ALE-L21. No other variant.
from huawei site i could not download any ROM.
Thanks for the mirrors to Robertuzu and Kajartandi
OP, I'm glad you got it fixed. Continuing this thread in XDA Assist is not the appropriate place. However you've found a solution for your device that can help others so I'm going to ask a moderator to move this thread here, http://forum.xda-developers.com/android/help. Also see this, http://forum.xda-developers.com/showthread.php?t=2073370. Perhaps you could write a guide that would help others with your device.
Consider editing your post title to add [SOLVED] That'll help others find your post.
raoulserban said:
hello. i followed the same steps and the results are following:
-P8Lite Orange RO, single sim so called variant
-Flashed the ROM via tutorial, Step1 and then Step2.
- ROM has now dual card(sim) management enabled. Upon start it requieres 2 PIN's, each for every sim.
Only SIM1 has signal, sim2 has absolute no signal. When sim1 is disabled from dualcard management only then sim2 has signal. did a reset, started from scratch, same story.
is there any way to resolve this. to make it completely Dual Sim Full Active, as it should be from Huawei. The Huawei P8lite codename is ALE-L21. No other variant.
from huawei site i could not download any ROM.
Thanks for the mirrors to Robertuzu and Kajartandi
Click to expand...
Click to collapse
I've seen the same problem reported here:
htcmania.com/showthread.php?t=1016301&page=7
The user fixed the problem flashing the spanish firmware.
I've downloaded both firmwares (MEGA and Espana). The only difference is in the "step2" folder (it doesn't exists in Spanish firmware). Step1 folder IS THE SAME.
So, in my opinion you shuld try to flash only the "Step1" folder and check if all is ok.
Let us know if this fixes your problem
[/COLOR]
raoulserban said:
hello. i followed the same steps and the results are following:
-P8Lite Orange RO, single sim so called variant
-Flashed the ROM via tutorial, Step1 and then Step2.
- ROM has now dual card(sim) management enabled. Upon start it requieres 2 PIN's, each for every sim.
Only SIM1 has signal, sim2 has absolute no signal. When sim1 is disabled from dualcard management only then sim2 has signal. did a reset, started from scratch, same story.
is there any way to resolve this. to make it completely Dual Sim Full Active, as it should be from Huawei. The Huawei P8lite codename is ALE-L21. No other variant.
from huawei site i could not download any ROM.
Thanks for the mirrors to Robertuzu and Kajartandi
Click to expand...
Click to collapse
Afew days ago I bought one from Vodafone in Greece which was branded and thus it supported only one sim card. I just flashed the official B046 firmware and the phone now is dual sim. Of course it is nοt Dual Sim Active as very few and expensive phones are. It's a regular Dual Sim Standby phone which disactivates reception on one while on a call on the other. Don't flash the "Spanish" firmware. I did, a week ago, and I ended up with a phone that thought that it had firmware B311 and that it was a different model. I couldn't even do a hard reset! I then downloaded the Mega firmware, flashed Step 2 first, then Step 1, then Step 2 again and then I did a hard reset. Now the phone works brilliantly.
i have flashed the spanish firmware. same story. only one sim at a time has signal. at one point both did not have signal, kinda paniked. the spanish firmare allowed me a reset and the data about phone and firmware was same B046.
I am trying now to do step2, then step1, then step2 again than a reset. hopefully it will bring something
They probably rectified the problem and they are now offering the correct firmware for downloading.
no succes.
so... i have no other idea.
i have used the Mega download with 2 steps. i have used the spanish firmware. all of them have the same build number.
everything goes smooth while "upgrading" via sdcard.
i do not know what to try. it is interesting that i have signal on sim2 only after i disable sim1. when sim2 has 4g data enabled then both sims do not have any signal
i have downloaded all available firmwares. i even downgraded to b041 from b046b. SIM1 has signal, sim2 has no signal. when one is deactivated , the other one has signal.
i did a hard reset every time after the flash. No success! can anybody with more knowledge on this investigate and help.
raoulserban said:
i have downloaded all available firmwares. i even downgraded to b041 from b046b. SIM1 has signal, sim2 has no signal. when one is deactivated , the other one has signal.
i did a hard reset every time after the flash. No success! can anybody with more knowledge on this investigate and help.
Click to expand...
Click to collapse
Your sims supports 2G? Because when you enable all the 2 SIMS, the second one goes in 2G.
For example, in my case (H3G Italy), I can't use my SIM in 2G, so if I enable the 2-SIM mode, the second sim has no signal.
I must use (as second SIM) another operator which supports 2G mode.
i used the same sims in another p8lite(dual sim from the store). it is not the sims
Dear Admin, please mark issue as Unsolved.
i have tried 5different sims. just to be sure. same issue.
i have flashed again the Firmware from Mega file. step 1(b046b) and step 2. no resolution.
i have downloaded from huawei 3 firmwares. one called open market(b046b), one marketspecific(b046b), one from malaesia(b311). flashed them all, same issue.
Phone works great, yet it is a shame i can not use it as Huawei designed it(aka dual sim full active, signal on both sims simultaneosly)
there are P8Lites , like mine, with vendor specific firmware, where the second sim is disabled. there are users who managed to free the sim2 slot without any issue yet there are users who could not do that. what exactly did the vendors do is unknow for now and we need a dev for a custom rom.
please take a look!
ps: there are users who say that the latest OTA update(b052) brings signal to sim2, but it is not confirmed by many
http://consumer.huawei.com/es/support/products/index.htm?pro=ALE-L21 the open market firmware
raoulserban said:
..
Phone works great, yet it is a shame i can not use it as Huawei designed it(aka dual sim full active, signal on both sims simultaneosly)
...
Click to expand...
Click to collapse
Only a clarification: P8 Lite IS NOT DUAL SIM FULL ACTIVE, it is Dual Sim Dual Standby: the 2 Sims works concurrently, but when you receive a call on one sim, the other goes offline.
Hello
there is the link for 052 update
chrome://mega/content/secure.html#!ohZVBDrS!8LPT5Hta-v02lKtLcdgtVy6QAxOsUTj5t21aOhrzfLI
Put update.zip into dload paste, do the normal update, and finaly the 2 sims work like a charme
teste and fully works
regards
---------- Post added at 07:21 PM ---------- Previous post was at 07:18 PM ----------
work link sorry
https://mega.co.nz/#!ohZVBDrS!8LPT5Hta-v02lKtLcdgtVy6QAxOsUTj5t21aOhrzfLI
Yes. this update truly frees te second sim. I have followed the spanish forum and flashed it then, just took me a while to confirm here too
NO WIFi
i followed the instruction with the latest update file and now both sims are active and working fine.
The problem is no wifi at all. and is not possible to turn it on even.
any ideas?
im from pakistan i dont have any issue but im using the second slot for memory card stock firmware is working perfect loving the phone in its price range .
Hello friends my s4 9505 have stock kk UGNJ3 base rom.last 15 days simcard removed error more and more time.now i am at india and have vodaphone network.pls help.may i tried factry reset,clear cache by recovery bot not fixed.help pls.
SIM
Hello and thank you for using Q&A,
maybe the SIM-Card is broken. Are you able to try another SIM-Card in your Samsung Galaxy S4?
Kind regards
Trafalgar Square
My sim new. Brought only 1 month before.other 2 sim card differant provider working fine.only my new vodaphone have error.
If all other SIMs are working, your SIM is broken.
Maybe you can send it back to Vodafone.
Thanks to reply. now my problem solved.may I put some packing back side on my sim socket and now ok.