UPDATE EDIT: After the eighth try..Wipe/Flash/Wipe/Reboot...All of a sudden the darn thing is working again.
Having a bit of an issue. Last night my P027 went into a boot loop while I was watching YouTube. I am able to get into TWRP, but my backup is corrupted. I have attempted to flash WW_V14.0210.1806.33 from the external SD, but no luck. It appears to flash properly, but it hangs at the ASUS screen. I then go back into TWRP and try to flash again...Rinse & Repeat.
Is there a definitive way to go back to stock, or does someone out there have a viable rooted backup they can share?
I'm at a loss. I absolutely hate this tablet.
Related
TL;DR: I have flashed the stock 4.2.1 image through fastboot, and yet my n7 wifi still reboots continuously at the google screen with the little unlocked lock.
Background: I have had the device for about 3 months, no real problems with it before this. I was reading yesterday night and i fell asleep, and thus instead of being on my desk all night the device was under a blanket. When i woke up, I opened the cover and found it on the google screen with the lock. It was warm, but not incredibly so. I thought it was weird that it had rebooted and apparently frozen, but i held down the power to turn it off. when i turned it back on, it started the google screen, then went black, then started the google screen again. Seems like there may be some sort of a kernel issue that is keeping it from booting. The next thing i did was to go into recovery (had CWM at this point, and it was rooted as well but that's a moot point if i can't get into the system.) and i did a backup, then wiped data and did a restore from the backup that i had just made. after rebooting, it made it all the way into the system, and seemed ok. I set it down, and a few moments later it turned off and started doing the loopy google screen thing again. Next, I went into recovery and wiped data/factory reset, and tried to boot up. no luck, still looping. Next, i grabbed the 4.0 toolkit from the dev section and tried to flash the stock recovery from that, but it was proving troublesome so i just downloaded the image myself and fastbooted then replaced cwm with the stock recovery, wiped everything, and flashed the 4.2.1 image. that should have worked, from what i understand, but no, still being loopy. I re-wiped and flashed, tried 4.1.2 instead, that didn't work, and i re-did 4.2.1. after flashing 4.2.1 and then leaving it boot looping for a little while, i noticed that it sometimes made it into the boot animation and then the animation froze and it rebooted and looped more. after a few more tries, powering it off, leaving it for a few min, and powering it on again, it booted all the way to the welcome screen to pick a language and then froze. some number of loops later, it made it all the way to picking a wifi network and froze. I have yet to make it past that point. Thinking it may help, i fastbooted CWM onto the device, so i have a more capable recovery now. I am now going to look into pushing a non stock rom to the device to see if that will help at all.
Any ideas on what on earth could have caused this? Was it just that the device was a little warmer than usual for a while?
Any ideas on how i can fix this? Much appreciated!
Lastly, should i consider looking at sending it back to google? I didn't think there was anything wrong with the hardware, but i'm not sure.
Thanks!
Update: After leaving the system repeating it's loopy boot thing for about 45 min, it seems to have finally booted into the system, and has yet to reboot again. I have no idea why this happened in the first case, nor why this finally worked in the end, but so far it seems ok.
More: Ok, so it still seems to be looping a lot. I have no idea why still. I'm having trouble getting it to boot back into the system, so hopefully something helps fix this.
Ok, so a day later it seems to have settled down such that there's very little looping on the google logo screen any more; now it just tends to randomly reboot when in use. this is quite frustrating, but seems more similar to what others have reported to be the case with 4.2.1. oddly, i never had these reboot issues before it decided to fail the first time, so i'm not sure if this is just because ii'm on 4.2.1. I may look at flashing back to 4.1.2 and staying there, i suppose it can't hurt. does anyone else have any ideas as to what could be going on?
Okay so I finally got my shiny new Nexus 32GB a couple days ago. Rooted it last night no problem. This morning I flashed Trinity Alpha4. worked great but my OC/governer/etc settings wouldn't stick. So I tried to flash the latest build of Faux Kernel. After flashing it got stuck in a boot loop. So I got back into Recovery and flashed Trinity back on again. Now it won't boot at all. After the splash screen the device completely locks up at a blank black screen. Went back to Recovery, wiped cache/dalvik, reflashed Trinity. After going through the "Android has been upgraded, optimizing apps" thing, it got stuck on "starting apps". After a couple min. I forced it to reboot, and again just gets stuck at a blank screen. I apparently completely forgot to do a Nandroid backup which I realized when I tried to restore it back lol.
Anywho, any thoughts on getting the thing to boot? Bricking it 2 days after I got it home is not my idea of a good time.
thebullfrog said:
Okay so I finally got my shiny new Nexus 32GB a couple days ago. Rooted it last night no problem. This morning I flashed Trinity Alpha4. worked great but my OC/governer/etc settings wouldn't stick. So I tried to flash the latest build of Faux Kernel. After flashing it got stuck in a boot loop. So I got back into Recovery and flashed Trinity back on again. Now it won't boot at all. After the splash screen the device completely locks up at a blank black screen. Went back to Recovery, wiped cache/dalvik, reflashed Trinity. After going through the "Android has been upgraded, optimizing apps" thing, it got stuck on "starting apps". After a couple min. I forced it to reboot, and again just gets stuck at a blank screen. I apparently completely forgot to do a Nandroid backup which I realized when I tried to restore it back lol.
Anywho, any thoughts on getting the thing to boot? Bricking it 2 days after I got it home is not my idea of a good time.
Click to expand...
Click to collapse
You might try and flash the stock kernel which should not allow any under/over clocking or under/over volting. Otherwise flash back to stock using the manual way here http://forum.xda-developers.com/showthread.php?t=1907796 or download the Nexus 7 toolkit and use it to do the same.
Try WugFresh's Nexus Root Toolkit. It has an option to go back to stock if you're soft-bricked.
Well I just did a factory restore/wipe (because Im SO looking forward to setting everything up again...) and it made zero difference. I'll try the stock kernel if someone could point me in the right direction to find a copy of it.
NVM found it. I'll give it a shot.
Ummmm okay then. I had my N7 turned off while looking for a solution to this fiasco. I picked it up so I could flash the stock kernel, and it had turned itself back on. Not only that, but it was fully booted up. Granted it's back to the initial setup after doing a factory restore, but there we go. It automagically fixed itself. Now to spend a couple hours putting everything back how it was. Yay.
Protip children: Always. Be. Nandroiding.
My G2 has been acting really funky lately, hanging on boot and not being able to "hold" recovery flashes. I'll start from the beginning of my little story.
On Saturday, I wanted to do a nandroid backup from TWRP (not sure which version, an older one but not terribly old). It failed several times. I went back into the OS (CM 12.1) and backed up all apps and app data to an OTG USB via Titanium Backup. This was successful. I tried to go back into TWRP a second time. Nothing. Recovery is not even there, I get a security error from what I believe is fastboot. I went back to CM and tried to re-flash TWRP. Now I get a security error on the LG screen. Nothing would boot, no recovery mode, I did have download mode although I had no PC with me so I didn't know this at the time. I was away last weekend so I had to go without a phone for a day... which was actually... kind of pleasent. Don't ask me why I carried two 32GB USBs and an OTG adapter on my keychain but no laptop, because I have no idea why I would do this, lol.
Came home Sunday afternoon and decided to nuke the whole phone with a TOT flash. Since I always wanted to try CloudyG2 since we all know AOSP-based ROMs don't do the camera justice, I went ahead and TOT flashed, re-rooted, re-AutoRec, etc. Everything worked wonderfully; I did a full wipe in TWRP, flashed in Cloudy, then the KK radio, then Xposed. Played around with things like XCam and a few Xposed modules. Everything was working awesome, so I did my restore in Titanium. Took a few hours, but Titanium says everything went fine (sans for a few CM apps which did not restore by design I guess). I checked out a few apps, all my data is there, wonderful. Titanium told me to restart so after poking around a bit, I went for the restart. Hang on boot. For several hours. Tried to go to recovery, fastboot security error. Seems it can't "hold" recovery or something else that I'm flashing?
Clearly I am doing something incorrect here with flashing and all that, but I can't figure out what. I'm not new to flashing and modding, and I've flashed regular CM updates and other goodies onto this G2 for quite a while with no issues. I'm going through the same steps I would normally with CM, and I've had plenty of success with that. Any ideas what I am doing wrong here?
Had same issue and know I hard bricked it trying to get it fixed ... Off to a different phone I guess .. Not sure why it wouldn't hold a recovery either after a few hours ... I gave up .. Good luck
Sent from my SCH-I535 using XDA Premium 4 mobile app
Okay, so usually I'm quite savvy when it comes to technology, but this one's stumping me.
Yesterday afternoon, I turned my phone off to go into work. It was working quite normally before then. When I get on break, however, I find that my phone won't get past the main logo. I figure that my phone needs a reflash, so today I went to reflash the xXx rom. Still no luck. I tried flashing stock OOS Beta 3, but then my phone went into a recovery bootloop. I tried flashing those two roms several times, but now my phone just stays in a recovery bootloop.
I'm pretty sure this isn't software-related, but I want to be wrong. That's why I'm posting here first, just in case it isn't.
I didn't do anything for it to go into a bootloop, I just turned it off after a normal day, and now it won't turn back on.
If you are decrypted you need to flash the no verify zip for OOS to boot up. With xXx anything from the version of Magisk used to one of the mods you chose in the aroma installer can cause problems. Your best bet is to boot into TWRP, format the data on your phone using the option in the wipe tab, connect your phone to a computer--it will be recognized like an external harddrive--copy and paste a full ROM zip for stock OOS Oreo onto your phone and then flash it with TWRP. Also make sure you are using one of the recommended versions of TWRP for OOS Oreo. The best version right now is the one from Codeworks. Good luck.
Sorry in advance for my English. As the name makes clear, my SMT280 doesn't turn on. The thing is, after I reflashed it and installed TWRP, I needed to do a full data reset. I went to TWRP, and apparently accidentally put a check mark on the system item. After that, the system stopped loading and the tablet freezes on the logo screen. Also, the PC stopped recognizing it, so I can't flash it through Odin. In an attempt to fix something, I took boot.img, and recovery.img from stock firmware and installed them via TWRP. Now, of course, I lost TWRP, and with IT the last hope, because now I only have a default recovery, and all the above problems remain. As I said, I don't think the tablet is still recoverable, but still, if anyone knows of any way, I would be extremely grateful. Thanks.