Hi.
I have a pending update it won't download or start, how to fix or cancel it please?
Huawei P9 lite
Kennabiz said:
Hi.
I have a pending update it won't download or start, how to fix or cancel it please?
Huawei P9 lite
Click to expand...
Click to collapse
Hi, see internal memory, HWouc folder, delete the file if you find inside here, reboot.
Regards
Have no such folder...?
Kennabiz said:
Have no such folder...?
Click to expand...
Click to collapse
WOW, damn...
Dude have you still EliteTWRP inside ??
If yes consider to use 3.1.1-1 instead of 3.2.x.x, because of the issues...
If not this is very strange..
If problem still persist backup all your stuff and do a factory reset.
Good luck dude
Factory reset coming up lol..
@ Dadditz, Thanks for responses.
Kennabiz said:
Factory reset coming up lol..
@ Dadditz, Thanks for responses.
Click to expand...
Click to collapse
No kind of problems.
Remember that you can not do the updates with a custom recovery, you need the stock one.
Happy holidays and good luck.
Kennabiz said:
Factory reset coming up lol..
@ Dadditz, Thanks for responses.
Click to expand...
Click to collapse
Dude it was simpler than what you imagined.
In fact it was only necessary tap on WIPE
and then SWIPE for factory reset as you can see in the attachments....
Wich firmware you putted in dload folder ??
What happen if you turn off and try to reboot holding vol+ and power button ??
If I reboot holding volume+ and power I get
EMUI
Reboot system now
Wipedata/factory reset
Wipe cache partition
And in dload folder I put full service update file.
I really did something wrong cause no matter how many times I try I still have incomplete firmware, not even keyboard
Kennabiz said:
If I reboot holding volume+ and power I get
EMUI
Reboot system now
Wipedata/factory reset
Wipe cache partition
And in dload folder I put full service update file.
I really did something wrong cause no matter how many times I try I still have incomplete firmware, not even keyboard
Click to expand...
Click to collapse
Dude why you done wipes instead of factory reset, these are two different things, very different...
You understand you erased all partitions and tried to recover by dload method
furthermore with a completely wrong firmware.
You were on VNS-L31C02B346 vodafone branded firmware
and tried to flash VNS-L31C185B384 unbranded nord african / middle east region firmware.
I can guarantee you that it would never work this way.
Now you f**k*d up your device.
Unbrick is not too difficult but you have to work hard,
and literally follow the guides i tell or suggest.
First thing be sure it's detected connecting to your PC and grant needed permissions.
Second, reboot to bootloader and see how Bootloader and FRP states are.
Report these basic info to proceed.
Will advice you my methods are based on personal experiences
and i cannot guarantee nothing, you assume all responsibility
of what are happening on your device, after all it is in your hands not in mine.
Good luck dude.
:silly:
Bootloader and FRP unlocked.
Kennabiz said:
:silly:
Bootloader and FRP unlocked.
Click to expand...
Click to collapse
Find a way to backup all your stuff and unlock again bootloader.
This will factory reset again your device.
Download and install via fastboot EliteTWRP 3.1.1-1....
Reply me when you're this step.
Dude if something donot take correct way you will only use your device as a paper clip
so ask before if you are not sure what you're doing...
Paper clip you say lmao
OK all backed up and all Unlocked, flashed EliteTWRP 3.2.1.0??
Kennabiz said:
Paper clip you say lmao
OK all backed up and all Unlocked, flashed EliteTWRP 3.2.1.0??
Click to expand...
Click to collapse
You unlocked again bootloader ?
Use EliteTWRP 3.1.1-1 as i know already worked.
Dadditz said:
You unlocked again bootloader ?
Use EliteTWRP 3.1.1-1 as i know already worked.
Click to expand...
Click to collapse
Yes unlocked boot again, I will flash with TWRP 3.1.1.1.
OK 3.1.1.1 flashed..
Ready
Kennabiz said:
Ready
Click to expand...
Click to collapse
Ok, let's do the work...
With a PC create a folder on your desktop and rename as you want, may choose VNS-L31C02B346.
Download from official thread Huawei Recovery Updater v.04 and put into that folder.
Just add EliteTWRP 3.1.1-1 or whatever recovery you want ( must be for nougat/android 7 )
in order to keep custom recovery otherwise stock one will be flashed.
Now download these three .zip files
update (.zip)
update_data_full_public (.zip)
update_full_VNS-L11_vodafone_default (.zip)
on your PC and rename update_data_full_public to update_data_public
and update_full_VNS-L11_vodafone_default to update_all_hw.
Copy these renamed files into your folder together with Huawei Recovery Updater and EliteTWRP recovery.
Check that everything matches.
Dadditz said:
Ok, let's do the work...
With a PC create a folder on your desktop and rename as you want, may choose VNS-L31C02B346.
Download from official thread Huawei Recovery Updater v.04 and put into that folder.
Just add EliteTWRP 3.1.1-1 or whatever recovery you want ( must be for nougat/android 7 )
in order to keep custom recovery otherwise stock one will be flashed.
Now download these three .zip files
update (.zip)
update_data_full_public (.zip)
update_full_VNS-L11_vodafone_default (.zip)
on your PC and rename update_data_full_public to update_data_public
and update_full_VNS-L11_vodafone_default to update_all_hw.
Copy these renamed files into your folder together with Huawei Recovery Updater and EliteTWRP recovery.
Check that everything matches.
Click to expand...
Click to collapse
Right all done as above...:good:
ps: THANKS
Next Step??
Kennabiz said:
Right all done as above...:good:
ps: THANKS
Next Step??
Click to expand...
Click to collapse
Hi
OK, you're ready to flash.
Copy your folder into SD card and reboot to recovery.
Tap install then find your folder, open it, tap on
HuRUpdater_0.4 then swipe for flashing.
Follow procedure into the flasher.
At the end it will reboot to system.
Probably at boot you will see some red lines, don't worry...
Press power button to skip and boot into system.
It should take many minutes, keep calm....
Do basic settings ( without any accounts ), enable developer options, then allow oem unlock and usb debugging.
Make sure your PC recognizes the phone ( let's HiSuite be installed ).
Turn off the device, connect it to your PC, and unlock again the bootloader...
Hope all will take right way and at the end
will have your latest working system ( VNS-L31C02B346 )
and EliteTWRP recovery ( if you added it in your folder )
Dadditz said:
Hi
OK, you're ready to flash.
Copy your folder into SD card and reboot to recovery.
Tap install then find your folder, open it, tap on
HuRUpdater_0.4 then swipe for flashing.
Follow procedure into the flasher.
At the end it will reboot to system.
Probably at boot you will see some red lines, don't worry...
Press power button to skip and boot into system.
It should take many minutes, keep calm....
Do basic settings ( without any accounts ), enable developer options, then allow oem unlock and usb debugging.
Make sure your PC recognizes the phone ( let's HiSuite be installed ).
Turn off the device, connect it to your PC, and unlock again the bootloader...
Hope all will take right way and at the end
will have your latest working system ( VNS-L31C02B346 )
and EliteTWRP recovery ( if you added it in your folder )
Click to expand...
Click to collapse
Ran through flash process no issue's (i think)
then booted up to: Your device has been unlocked and can't be trusted,
No RED lines....
Then Vodacom startup screen for bout 6 minutes,
Setup of device Country WiFi and so on.... All Configured,
Rebooted twice, Sim not being detected ???
ps: after whole process completed i did not need to unlock boot or FRP they were both still unlocked..
ps: Happy New Year All...
Kennabiz said:
Ran through flash process no issue's (i think)
then booted up to: Your device has been unlocked and can't be trusted,
No RED lines....
Then Vodacom startup screen for bout 6 minutes,
Setup of device Country WiFi and so on.... All Configured,
Rebooted twice, Sim not being detected ???
ps: after whole process completed i did not need to unlock boot or FRP they were both still unlocked..
ps: Happy New Year All...
Click to expand...
Click to collapse
Hello and happy 2019 !!!
So whole process took right way...
Is your sim working now ?
Is you phone working except for sim ?
Dude try that (in)famous factory reset, not wipes,
only factory reset...
Related
Hi friends, I've found a way to root 10.4.B.0.577 android 4.3. Please see the instructions below:
Prerequisite:
1. Download SuperSU flashable at: http://download.chainfire.eu/351/
2. Download extract the boot.img from CM10.2 (attached as well)
3. Download the install fastboot
Steps:
1. Flash the stock ROM of 10.4.B.0.577
2. Put the Tablet Z in fastboot mode (press and hold Vol+ when inserting USB cable)
3. Open a console where the fastboot.exe is located, type
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
6. Power off the device
7. Flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM
8. Boot up and you will have the SuperSU installed
My device is unlocked, I'm not sure if this works for locked bootloader as well. Try at your own risk! This method should work for both WIFI and LTE models.
[Files uploaded again, change 001.boot.zip to boot.zip.001 and do the same to 002 unzip]
This method works fine but only with unlocked bootloader as if you are locked you cant flash boot.img from fastboot
pangiotis24 said:
This method works fine but only with unlocked bootloader as if you are locked you cant flash boot.img from fastboot
Click to expand...
Click to collapse
For Locked bootloader, the only working method atm is here http://forum.xda-developers.com/showthread.php?t=2588442, the files needed for all XTZ models ( 351,321,311,312) are there now
Unlock/Root/Relock BL
Hello!! Great job but i have a question!! Can we unlock the bootloader, root with your guide and then relock the bootloader?? It will be rooted after relock?
Attached files ?
Xyam said:
Hi friends, I've found a way to root 10.4.B.0.577 android 4.3. Please see the instructions below:
Prerequisite:
1. Download SuperSU flashable at:
2. Download extract the boot.img from CM10.2 (attached as well)
3. Download the install fastboot
Steps:
1. Flash the stock ROM of 10.4.B.0.577
2. Put the Tablet Z in fastboot mode (press and hold Vol+ when inserting USB cable)
3. Open a console where the fastboot.exe is located, type
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
6. Power off the device
7. Flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM
8. Boot up and you will have the SuperSU installed
My device is unlocked, I'm not sure if this works for locked bootloader as well. Try at your own risk! This method should work for both WIFI and LTE models.
Click to expand...
Click to collapse
Sorry, but when you say that the files are attached... attached to where ? can't see them anywhere. thanks in advance.
Installing SuperSU
Xyam said:
fastboot flash boot boot.img
fastboot reboot
4. Keep pressing Vol+ for a few times it boots up
5. Install SuperSU as normal
.
Click to expand...
Click to collapse
Sorry for asking again, I'm new and I'm struggling with this. I tried to follow your steps (my tablet is a SGP312). I followed the steps, but I'm not sure if the ZIP file with SuperSU has to be downloaded to the tablet or what, as in step 5 you say "install SuperSU as normal". Does that mean through play store ? Directly from the file ? If it´s from the file, how ?
When I tried this in my tablet, after flashing boot.img and rebooting, I got a loader screen where I selected add super used, rebooted, and then... the tablet didn´t start again. It gets stuck in the initial booting screen with the color lights passing.
Also, I noticed that after the fastboot reboot, the message that I got in the loader mentioned SGP311, not 312. Any help would be much appreciated. Thanks.
TheRealAlexei said:
Sorry for asking again, I'm new and I'm struggling with this. I tried to follow your steps (my tablet is a SGP312). I followed the steps, but I'm not sure if the ZIP file with SuperSU has to be downloaded to the tablet or what, as in step 5 you say "install SuperSU as normal". Does that mean through play store ? Directly from the file ? If it´s from the file, how ?
When I tried this in my tablet, after flashing boot.img and rebooting, I got a loader screen where I selected add super used, rebooted, and then... the tablet didn´t start again. It gets stuck in the initial booting screen with the color lights passing.
Also, I noticed that after the fastboot reboot, the message that I got in the loader mentioned SGP311, not 312. Any help would be much appreciated. Thanks.
Click to expand...
Click to collapse
you have to flash the SuperSU .zip file via CWM. Do you know how to enter CWM and flash a .zip file?
Vaggelis AsKyE said:
you have to flash the SuperSU .zip file via CWM. Do you know how to enter CWM and flash a .zip file?
Click to expand...
Click to collapse
I think through the fastboot reboot, pressing the vol up. When I tried it before I entered in some kind of boot menu, with one option been "install from zip" or something like that but I didn´t try it.
I tried entering in it again and clicked on factory reset hoping that would do a cfresh install, but I still have the same issue: when powering up the tablet it keeps displaying the intro (the color lines) endlessly
TheRealAlexei said:
I think through the fastboot reboot, pressing the vol up. When I tried it before I entered in some kind of boot menu, with one option been "install from zip" or something like that but I didn´t try it.
I tried entering in it again and clicked on factory reset hoping that would do a cfresh install, but I still have the same issue: when powering up the tablet it keeps displaying the intro (the color lines) endlessly
Click to expand...
Click to collapse
you have to follow the guide!! at the step u flash boot.img and restart the tablet you must press rapidly many times to enter the boot menu. There u chose install from zip and find the file SuperSU.zip (i recommend u to use external sd card to save the SuperSU.zip file). When it finish u go back and find the ''Advanced'' option on the boot menu, u press it and then press power off. Then flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM!!!
Vaggelis AsKyE said:
you have to follow the guide!! at the step u flash boot.img and restart the tablet you must press rapidly many times to enter the boot menu. There u chose install from zip and find the file SuperSU.zip (i recommend u to use external sd card to save the SuperSU.zip file). When it finish u go back and find the ''Advanced'' option on the boot menu, u press it and then press power off. Then flash the stock ROM of 10.4.B.0.577 again BUT EXCLUDE the SYSTEM!!!
Click to expand...
Click to collapse
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data
TheRealAlexei said:
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data
Click to expand...
Click to collapse
Happy you made it!!! :good:
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
TheRealAlexei said:
Thanks for your help. Actually I managed to do it pretty much as you said) except the advanced -> power off, which I didn´t know: I assumed that was the way to access the boot menu, and to install Super SU, so I copied the ZIP into my external SDCard, did all the steps, and my tablet came back to life... with SuperSU installed
Lucky me I did a full backup following another guide, because in my desperation to bring my tablet back to life I did a full wipe out / factory reset (which btw didn´t solve anything).
Thanks for your replies and apologies if my questions seemed dumb... It's been many years since I "almost" break a device and lost all the data
Click to expand...
Click to collapse
I have one question!! Does your tablet lag a little when it is closing? The bar loading at me and for 10 sec tablet freezes and then it close... do u experience the same issue??
TheRealAlexei said:
Sorry, but when you say that the files are attached... attached to where ? can't see them anywhere. thanks in advance.
Click to expand...
Click to collapse
Sorry just realized that XDA did not allow .001 and .002. Please download them again, change 001.boot.zip to boot.zip.001 and do the same to 002 to unzip. Alternatively you can download CM10.2 and extract the boot.img from the zip.
Vaggelis AsKyE said:
Happy you made it!!! :good:
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
I have one question!! Does your tablet lag a little when it is closing? The bar loading at me and for 10 sec tablet freezes and then it close... do u experience the same issue??
Click to expand...
Click to collapse
did you mean shutting down or what? if you are mentioning shutting down, i have the same issue, but not related to rooting. just wait for around 20~30 seconds after you see "shutting down"
Vaggelis AsKyE said:
Hello!! Great job but i have a question!! Can we unlock the bootloader, root with your guide and then relock the bootloader?? It will be rooted after relock?
Click to expand...
Click to collapse
i was thinking the same idea. but will only do that if i have a hardware issue and need repair at sony repair center
[/COLOR]
Xyam said:
did you mean shutting down or what? if you are mentioning shutting down, i have the same issue, but not related to rooting. just wait for around 20~30 seconds after you see "shutting down"
Click to expand...
Click to collapse
I chose shut down from the menu and the bar is loading. After a while tablet freezes and after 10-15 seconds tablet goes off
ok so
i have SGP311 with 10.4.B.0.577
i must have custom recovery to instal UPDATE-SuperSU-v1.86.zip or i can instal it in stock ?
Mr0czny said:
ok so
i have SGP311 with 10.4.B.0.577
i must have custom recovery to instal UPDATE-SuperSU-v1.86.zip or i can instal it in stock ?
Click to expand...
Click to collapse
if u flash boot.img with flashtool u will get custom recovery (CWM) installed!!!
Hello,
I have ever update my XTZ on 4.3 JB. Do you think it is necessary to "flashboot" again the new firmware (Step 7) after install of Supersu.zip ?
If yes, can you explain why ?
Thanks for your help
strung3 said:
Hello,
I have ever update my XTZ on 4.3 JB. Do you think it is necessary to "flashboot" again the new firmware (Step 7) after install of Supersu.zip ?
If yes, can you explain why ?
Thanks for your help
Click to expand...
Click to collapse
Hello,
At this guide u flash boot.img from CM10.2 ROM (Step 3). At the end you have to reflash the new firmware so the boot, kernel etc change, because if u stay with CM10.2 u will get bootloops!!
Vaggelis AsKyE said:
If you unlock bootloader you can't use music info download and Bravia engine also. Although, I unlocked my bootloader and I followed your guide rooting successfully my Xperia Tablet Z SGP311 with .577 firmware. I used the latest flashtool to unlock the bootloader!!
When I finished all the process of rooting the music info didn't work so I tried to relock the bootloader with flashtool!! I did and guess what!! I have root with locked bootloader, stock firmware and working music info download!!!
You can make a guide that everyone with his own ftf can root his device just unlocking and locking the bootloader!!
The process must be done strictly with flashtool cause it keeps the keys for the relock!!!
Click to expand...
Click to collapse
Question: if you unlock the bootloader with Sony tools do you loose the music download info and the Bravia engine ????????
How to unbrick or get back stock on your Huawei Mate 8. There are many reasons why you would want to do that.
In my case my device (AL10) was stuck at "your device cannot be trusted" after updating from B180 to B321.
First I got to thank acer73 for his software. ajsmsg78 and Kris Chen for their links to the right ROMs.
Also thanks to DarkSilentSC for his help, especially with the L29, great support.
He has a L29, which I don't have, so I'm glad he provides help with that device.
This worked for me on my AL10 to get it back on track, should work on other models too. Just have to find the right ROMSs as according to your model. However, I am not responsible if this does not work for you or if it bricks your phone even more.
And remember: don't forget turning on usb debugging whenever you can!
Unbrick (return to Stock)
1. Find yourself a stock ROM.zip according to your model and extract from the zip the update.app (I used one from a B172 (AL10) Stock ROM, I was running a B180 custom ROM, it worked.)
2. Download the Huawei Update Extractor http://forum.xda-developers.com/showthread.php?t=2433454
3. Extract boot.img, recovery.img, system.img and cust.img with the HuaweiUpateExtractor from the Update.App you find in the ROM to somewhere where you can find them easily
4. Head over to http://forum.xda-developers.com/mate-8/development/rayglobe-italian-knife-t3295526 (You can also do it with fastboot commands, but Acer73's tool makes it easier)
5. get yourself the Italian Knife (btw you probably have to turn off your anti-virus program), extract it in a directory on your PC and start Rayglobe_knife.exe
6. Put the images you have extracted into the folder Unbrick (same directory where you extracted Rayglobe Knife in). The folder was created after you started Rayglobe_Knife.exe
7. Boot your phone into bootloader.
8. In the Rayglobe Knife tool choose Unbrick and choose the option where it says you have placed all the images in the unbrick folder.
9. let the magic work. The phone will restart and it will probably take 15 minutes, make sure its charged enough.
After all that I quickly updated to the latest Stock ROM version, in my case B321, which you need to do if you want to flash later a custom B321. See second post if you want to do that as well or continue with unlocking the bootloader.
Now lets get the bootloader unlocked (for some reason mine was still unlocked)
1. Get Minimal ADB https://www.androidfilehost.com/?fid=24521665358595410
2. Hopefully you still have your unlock code (cause you need it otherwise it won't work)
3. Put your phone in Bootloader Mode (Press & hold power and volume down)
4. Extract Minimal ADB zip and run command.bat
5. Type <fastboot oem unlock xxxxxxxxxxxxx> (where xxxx is your bootloader unlock code)
6. Done
Now lets get twrp set up
1. For that we need minimal ADB again
2. Headover to http://forum.xda-developers.com/mate-8/development/recovery-twrp-huawei-mate-8-t3298567
3. Download TWRP according to your EMUI (For B321 it's EMUI 4.1)
4. Place the image in the directory of the Minimal ADB
5. Rename it to just twrp.img (not necessary but simplifies things)
6. Put your phone in Bootloader Mode (Press & hold power and volume down)
7. Run command.bat
8. Type <fastboot flash recovery twrp.img>
9. Then type fastboot reboot
10. Now you can hold volume up and power until your phone boots into TWRP
11. You need to format data (you'll lose everything on your phone)
12. Done
Remember: don't forget turning on usb debugging whenever you can!
!!!FOR L29 scroll down to DarkSilentSC's instructions!!!
After unbricking I quickly updated my AL10 to the latest version, in this case B321. Should work with all B3xx
1. Head over to Kris Chen's thread (this I used for the AL10)
http://forum.xda-developers.com/mate-8/development/rom-verison-t3324164
Or ajsmsg78's (also AL10 and L09)
http://forum.xda-developers.com/showpost.php?p=66776194&postcount=58 to get the Stock B321
2. Download the ROM and after downloading the zip file, extract update.app from it. Copy the UPDATE.APP to the internal memory of your HM8 in a folder called - dload (you may have to create it). Then press [volume+]+
[volume-]+[power] together to force the update.
3. Voila B321
-----------
!!![For the L29 you should try DarkSilentSC's instructions, which you find below or in post #54 on page 6 http://forum.xda-developers.com/mate-8/general/unbrick-updating-to-b321-t3375934/page6 don't forget to hit thanks!!!
1. Start from stock B170 firmware with TWRP ready
2. Extract BOOT, CUST, RECOVERY, SYSTEM from B321 UPDATE.APP
3. Add firmware .zip file (which contains META-INF folder and UPDATE.APP) and place it into internal storage
4. Make sure internal storage data is fully backed up
5. Delete All Accounts in Settings
6. Go to Recovery, Wipe Cache, Delvik Cache, Data, System
7. Flash that .zip file! (Getting errors is okay at this time) [This is what I didn't do before!]
8. Boot straight to bootloader
9. fastboot flash boot, cust, and system
10. let it boot. Let it proceed with encryption process in chinese and fully boot into EMUI
11. NOW I'M AT EMUI 4.1!
12. Reboot to fastboot and fastboot flash insecure_boot and flash TWRP
13. Reboot to recovery (TWRP) and then flash whatever rom you want to place in!
14. Enjoying it!
Great, was looking for details instructions like that, was stuck at cannot be trusted screen
Hello. Also i stuck today when i try to update. I try at my own all what did you said ......everything greast but when i try to flash rom from update.app proccess no pass more than 5:%.
My phone was also al-10 but 2 months ago i debrand with internation rom of acer. Nothing i cant flash . phone reboot work but can flash i thing my problem is the oem info file. Can anyone please help me
ganjbass said:
Hello. Also i stuck today when i try to update. I try at my own all what did you said ......everything greast but when i try to flash rom from update.app proccess no pass more than 5:%.
My phone was also al-10 but 2 months ago i debrand with internation rom of acer. Nothing i cant flash . phone reboot work but can flash i thing my problem is the oem info file. Can anyone please help me
Click to expand...
Click to collapse
Which update.app did you use? Maybe your download is corrupt?
BTW I debranded mine too with Acer's to international.
GerManiac said:
Which update.app did you use? Maybe your download is corrupt?
BTW I debranded mine too with Acer's to international.
Click to expand...
Click to collapse
NXT-AL10C00B321 i extract i unbrick from acer tool and then i use uppdate.app t but no pass more than 5%
What method you used for deprand? mine after debrand no able to use wifi recovery also no let me update even if i install factory recovery.
ganjbass said:
NXT-AL10C00B321 i extract i unbrick from acer tool and then i use uppdate.app t but no pass more than 5%
Click to expand...
Click to collapse
But you first used different ROM images to unbrick and then tried to update to B321.
really sounds as if your file is corrupted. Would try to download it again
GerManiac said:
But you first used different ROM images to unbrick and then tried to update to B321.
really sounds as if your file is corrupted. Would try to download it again
Click to expand...
Click to collapse
ok i will try tommorow......thanks for help by theway the phone booted but if i flash recovery for root no boot.... very strange....sometimes aloud to flash from boot some times no ohhhhhhh(((
Or something no correct with huawei extractor..... Can you provide extracted files?
Thanks in advance.
So I unbricked with B170 and then tried force flashing B321. My first attempt at flashing B321 ended up getting stuck at 5%. Tried flashing again and it said it was incompatible with the current firmware version of my phone. Any ideas on what I should do next?
Edit: Nevermind. I mistakenly copied the UPDATE.APP from B170 to the dload folder instead of the one from B321. lol
Now on B321. Thanks!
AndroidBestieRE said:
Great, was looking for details instructions like that, was stuck at cannot be trusted screen
Click to expand...
Click to collapse
Used this stock ROM for L29 to unbrick, it worked well following OP instructions
update.hicloud.com:8180/TDS/data/files/p3/s15/G1076/g104/v46463/f1/full/update.zip
hi, i have follow unbrick guide with knife, flash from knife and phone reboot. when phone reboot in settings, info phones, serial number is b321. is corretcly??
danielg90 said:
hi, i have follow unbrick guide with knife, flash from knife and phone reboot. when phone reboot in settings, info phones, serial number is b321. is corretcly??
Click to expand...
Click to collapse
Don't know which ROM you used to unbrick.
But seems that you used an B321 if that worked for you and you have no problems then that is great.
Could mean that wet can unbrick straight with the most current ROM available. If someone else could confirm?
GerManiac said:
Don't know which ROM you used to unbrick.
But seems that you used an B321 if that worked for you and you have no problems then that is great.
Could mean that wet can unbrick straight with the most current ROM available. If someone else could confirm?
Click to expand...
Click to collapse
i have AL10, please link stock rom that you used
danielg90 said:
i have AL10, please link stock rom that you used
Click to expand...
Click to collapse
Can't find the link right now, am in the car, but I've found this link to B170
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43738/f1/full/update.zip:
Did not check though if it works
GerManiac said:
Can't find the link right now, am in the car, but I've found this link to B170
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G884/g77/v43738/f1/full/update.zip:
Did not check though if it works
Click to expand...
Click to collapse
sorry, is possible flash with knife if bootloader is locked? my bootloader is locked
hello, my phone is still stuck.. i tried other cust/system/recovery/boot from other update.app, but its still stuck at: your device has been unlocked... im on l29
Have NXT-L29, downloaded stock L09 file from posted link, placed UPDATE.APP into 'dload' folder which I created, but still hanging at 5%. What to do?? Exactly where do I create this 'dload' folder? Just at 'Internal Storage'?
danielg90 said:
sorry, is possible flash with knife if bootloader is locked? my bootloader is locked
Click to expand...
Click to collapse
Bootloader has to be unlocked. You can unlock best with DC unlocker, it's fast and only costs around 5 dollars.
Unless you already have your unlock code then you can unlock following instructions see my first post
GerManiac said:
Bootloader has to be unlocked. You can unlock best with DC unlocker, it's fast and only costs around 5 dollars.
Unless you already have your unlock code then you can unlock following instructions see my first post
Click to expand...
Click to collapse
ok how can i unlocked bootloader with b321 stock?
DarkSilentSC said:
Have NXT-L29, downloaded stock L09 file from posted link, placed UPDATE.APP into 'dload' folder which I created, but still hanging at 5%. What to do?? Exactly where do I create this 'dload' folder? Just at 'Internal Storage'?
Click to expand...
Click to collapse
What are you trying to do? Unbrick or update?
The folder has to be created in internal storage
SOLVED!
Hi all i just bricked my phone : P9-lite VNS-L31
I managed to unlock bootloader, install twrp and get root permission. Phone worked great. Then i tried to flash xposed and the operation fails due to not enough memory space (!! i have 6gb) and get stuck in bootloop. I made all the possible things i knowed. Tried to use xposed-unistaller.zip (getting other errors like: "no such file o direcory") , wipe cache,dalvik and data and i try also to reflash stock recovery, and to relock bootloader (i can't do that.. why? i get FAILED <remote: command not allowed>) because erecovery and HiSuite can't restore my phone. What can i do?? It's a simple bootloop but i cant restore it. Please help me i have just bought the phone and now i'm very desperate.
I really hope some can help,
Thank you
Can you flash the stock rom through SD card?
Copy the stock rom file to this path: sd card\dload\UPDATE.APP,
Then, presss Volume + , Volume -, and the power keys to force upgrade your phone.
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Zeph1990 said:
Hi, i solved my problem flashing system.img extracted by an official firmware. Everything ok. If someone need it i can write a little guide now to restore bricked p9-lite with custom recovery and unlocked bootloader (the normal procedure does not work)
Click to expand...
Click to collapse
would you be so kind pls , and could you do the guide for me ? i somehow managed to ruin my phone , i can enter recovery , i can enter erecovery (wont download anything)
but what ever i tried didnt work :/ im getting kinda tilted , cus im trying to solve it for like 7hrs .. and im starting to be alot upset about it .. its like first time i cant repair it my self .. it hurts man (
so thanks for any help
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
with pressing volume - and power i enter into erecovery from there i should use fastboot to flash system.img ? sorry for being dum
edit: when in erecovery (volume- and power) typing fastboot flash system with full path , does nothing .. only saying waiting for device
edit2: no matter what i do , i cant fastboot flash system .. waiting for device .. only thing i can do is enter TWRP (also got root) , enter Erecovery and thats it .. phone only boots to huawei animation along wiht sound and thats it .. i tried adb sideload from TWRP but no help also .. guess there is nothing i can do right ?
Edit3: so i booted via TWRP to bootloader , used that fastboot command , flashed system , wiped cache , and now it is looking that phone is booting up !
thanks bro , any way i can pay you back ? cus you da MVP here !
EDIT4: well phone booted , rebooted , and now i cant enter recovery it boots into erecovery and i cant do nothing else
EDIT5: got into fastboot menu in phone , it says update system again , Error Func NO : 10 (boot image) Error NO : 2 (load failed)
EDIT6: somehow made it into fastboot , somehow flashed recovery , managed to restore my phone from back up , but sadly enough i cant restore it via google , since when i try to log in it says waiting .. dam this phone . i had galaxy S .. got this huawei just for pokemon go (which is pretty ****ty without gyro) FML right
EDIT7: lost most of my hairs .. some of them were ripped out in some anger explosions .. chewed of some of my nails .. but somehow i made it ! now if i only could unroot and relock bootloader xD think im gonna take a break for now and when my nerves will calm down i may try it again . Rly wanna thank you from all of my heart for help , thanks !! your the best man , thanks again
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Zeph1990 said:
Sorry, can you normally boot and use your phone now?
Edit: It seems you can boot. Now you have restored your twrp recovery. I don't know why you have problems with google log in, but hey now it boots!
Click to expand...
Click to collapse
i cant thank you enough , without you i couldnt achieve this so thanks again !!
finaly did everything .. and only thing left is get bootloader locked and unroot it hope i will somehow find the way
So happy to hear it! =)
I tried also to relock bootloader during my attempts to unbrick the phone but i fail.. i don't know why, but i think someone was able to do it.
Zeph1990 said:
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Hope this can help.
Click to expand...
Click to collapse
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
ElPinguShow said:
Where did you launch the command? I can't do it in the huawei update extractor... Please help!!
Thank you.
Click to expand...
Click to collapse
Hi, if you don't know what is fastboot maybe you can approach it the easy way.
Download and install this for the correct drivers : http://consumer.huawei.com/minisite/HiSuite_en/index.html
Download and extract to a folder this : https://mega.nz/#!B4tATA5D!-TseQ9A-TPEQhzNQRXsT_cV2i4T7qYYLadceW0fM8k0
Put your phone in fastboot mode : Turn it off. Connect it to your pc . Long press vol - and power until it boots in fastboot mode (white screen with a green android and other stuff). If you want you can boot in fastboot from TWRP recovery : restart -> bootloader.
Copy your extracted SYSTEM.IMG in the root path of the tool (we can assume its name is system.img).
Now launch the tool and press 000 and enter.
If you have done all right now you can give this : fastboot flash system system.img
Wait about 3 minutes. Perform a cache and dalvik cache wipe. Boot your phone.
Zeph1990 said:
So, i think i can help you to fix your phone.
First of all you need fastboot. So check fastboot drivers on your pc and make sure they work
Now download the stock firmware for VNS-L31 here : http://www.androidvillaz.com/2016/0...vns-l31-to-marshmallow-6.0-b100-firmware.html - It's the only version ready to download and an asian version but flashing only system you'll not notice it. All languages available, no differences at all.
Download and install this tool : http://forum.xda-developers.com/attachment.php?attachmentid=3262545
So using something like 7zip extract the UPDATE.APP file in your desktop for example.
Launch HuaweiUpdateExtractor and select the update.app.
You need to extract SYSTEM.IMG so right click on it and select extract selected.
Now, turn your p9lite in fastboot mode (power off, press vol - and power) and connect it to your pc.
Now launch this : "fastboot flash system "PATH/system.img" " . Remember to replace "PATH/system.img" with the path of your extracted system.img file including the name of the file.
Wait about 3 minutes.
When flash finalize, boot in recovery. Wipe cache and dalvik and reboot your smartphone. It should boot now.
If not, perform a full wipe. (cache,dalvik and data).
Hope this can help.
Click to expand...
Click to collapse
Hi,
I am using the standard P9, and getting the Boot Loop also.
I attempted your instructions, and appeared to work - I got the first EMUI initialization screen - and now its gone back to how it was.
Any suggestions?
I think it should work on every phone assuming you are using the right firmware. Do you use the right firmware for the huawei P9 ?? (needless to say it's not the version i posted)).
So if you flashed the right firmware (and i'm pretty sure of this) my advice is to perform a full wipe : Cache, dalvik and data.
If you are still facing the same error consider flashing other frimware parts like boot.img ecc.
I believe so - I am pretty clueless with this stuff.
By firmware, do you mean the stock version? Because I used P9-EVAL09-EVA-B136. Don't suppose you would know the right firmware I require?
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Zeph1990 said:
I think it's the right version. I am a p9lite user so i don't know specifically the right version of the firmware but i think it's ok. Do you tried a full wipe?
Click to expand...
Click to collapse
How can I perform a full wipe? Thanks for replying by the way
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Zeph1990 said:
So, do you have unlocked bootloader and custom recovery (TWRP) ?
Click to expand...
Click to collapse
I do yes
So, go in twrp recovery (turn off phone, long press vol up and power for at least 3 seconds). When you are in you will see 'WIPE' press it then do the swipe to Factory Reset. You will lost your installed apps and the relative settings but you will not lost your personal stuff such photo,music documents ecc. Let me know if you perform it and if it works =)
It appears that TWRP no longer appears. I get thr EMUI options to wipe data/factory reset. But once I do this I just get a red exclamation mark.
Does the phone need to be plugged in via USB?
Whatever you did to brick your device!
Whatever crazy thing you did to make this beauty a brick!
Next time, please don't waste time and money (dc-un...)
:crying:
First relax, take a deep breath in and smile. This method restored few phones and can be tried on every Huawei phone.
Second, hold volume-down+power and connect USB via PC. Means enter "bootloader"
Then pick up any old stock firmware of your region from this thread
Third unzip and rename folder to suit your model.
Fourth FASTBOOT.EXE FLASH ZIP UPDATE.APP and take a cup of tea or beer. Let all the error messages pass of.
Fifth, remove your ext_sd card and copy this extracted folder into root directory.
Sixth FASTBOOT.EXE REBOOT
It won't boot but will surely go to recovery, factory reset. Reboot.
Seventh, here is the main thing, hold volume-up+power till recovery shows updating
Eight, allow to update and get into the normal mode.
You will get your HUAWEI MATE 8 working in mint condition.
If this works, press the thanks button and rate this thread 5 stars.
All the best.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Another simplistic method if you are able to boot to your working rom.
2846579
Manufacturers port
Check your region
Then fastboot flash recovery recovery.img of existing 4.1 or 5.0 Rom.
Reboot.
Sdcard dload
2846579
Sdcard upgrade
And you are back to stock.
Do whatever you want to do, mate, but dont flash nougat rom this month!
Thanks. Will come in handy.
Think for yourself. Question authority.
This method also locks your bootloader without a trace of relock bootloader
No Option for NXT-DL00???
Good
Sent from my HUAWEI NXT-L29 using Tapatalk
zxwhoamixz said:
No Option for NXT-DL00???
Click to expand...
Click to collapse
What do you mean?
You can always use the debrand option of this amazing tool
somboons said:
Good
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Buddy, I had a tough time to roll back from nougat to my own firmware because of local power cuts affecting the process and I bricked.
I logged in DC account and even downloaded Phoenix software but thought let's try.
Aloha! I was successful
Had few gulf sets lying as bricks at my friend's shop and tried in those and they also booted up.
bluheart said:
Buddy, I had a tough time to roll back from nougat to my own firmware because of local power cuts affecting the process and I bricked.
I logged in DC account and even downloaded Phoenix software but thought let's try.
Aloha! I was successful
Had few gulf sets lying as bricks at my friend's shop and tried in those and they also booted up.
Click to expand...
Click to collapse
Good to hear that. My method is very safe to go back , I can confirm . and Thanks for a new knowledge . fastboot flash zip update.app
Not working.
D:\01 EMS\OneDrive\HuaweiMate8\SRKToolHuawei>fastboot flash zip UPDATE.APP
target reported max download size of 471859200 bytes
Invalid sparse file format at header magi
OP says
Then pick up any old stock firmware
Click to expand...
Click to collapse
Does it mean I should download older firmware that the one I want to run after downgrade? For example, C432B170 if I want to finally have C432B180?
Yes, use this thread to de brand
somboons said:
Good to hear that. My method is very safe to go back , I can confirm . and Thanks for a new knowledge . fastboot flash zip update.app
Not working.
D:\01 EMS\OneDrive\HuaweiMate8\SRKToolHuawei>fastboot flash zip UPDATE.APP
target reported max download size of 471859200 bytes
Invalid sparse file format at header magi
Click to expand...
Click to collapse
Exactly! It doesn't flash but the bricked locked phone can be rebooted without issues.
Hi there! Thx for the instructions but unfortunately it's not working as intended.
After the Step FASTBOOT FLASH ZIP UPDATE.APP i get this output: see attachment.
Then the device reboots normally after FASTBOOT REBOOT
Does the bootloader need to be unlocked?
I really like to go back to Version B180 for my mate. As hassle free as possible.
Thx in advance
Daniel
You will get error but after that flash boot into recovery and wipe.
Dload folder in sd-card is a must
bluheart said:
You will get error but after that flash boot into recovery and wipe.
Dload folder in sd-card is a must
Click to expand...
Click to collapse
Thx for the quick reply.
I did all that, but the only options i get are:
- normal recovery with reboot, factory reset and wipe cache
- or eRecovery when still connected to USB with the option to connect to wifi and download the latest package, which fails.
Other than that it's just a normal factory reset and the B320 Firmware boots just fine and welcomes me with the first start wizard.
My device is not really bricked. I just want to downgrade, maybe that doesn't work this way.
Also after the FASTBOOT FLASH ZIP UPDATE.APP there is:
...
writing zip..
FAILED (remote: Command not allowed)<--- this makes me wondering somethings not right, is it? This should at least work?
finished. total time: 12.077s
Hope you can help there
Daniel
Daniel, to downgrade, first you need to unlock and then follow all the steps as written here.
bluheart said:
Daniel, to downgrade, first you need to unlock and then follow all the steps as written here.
Click to expand...
Click to collapse
Ok, thought so. Hoped there was a way without unlocking!
Thank you for your time and your help. Much appreciated!
I will look into that.
Also try this
FASTBOOT.EXE FLASH ZIP UPDATE.ZIP
Click to expand...
Click to collapse
One more, didn't try though
FASTBOOT.EXE FLASH OEM UPDATE.APP
Do look here at times
Will try this after my Honor 8 gets charged.
It was bricked when updating from B162 (MM) to B320 (Nougat). Booting logo is the only one I could get, unless entering fastboot mode with holding vol- plus power keys when connected to a running computer. Three buttons (the above two plus vol+)results in bootloop as well.
Battery gets depleted unless charging when in fastboot & rescue mode. I'm going to charge it now (again).
BTW DC-Un... showed it was on B162.
Many users on this forum have a bricked Honor 7X (BND-L24 variant) and haven't found a working guide to breath life back into their devices. Fortunately, I found a method that appears to have fixed my BND-L24 that was running on oreo. Maybe it will work for you too. Nougat users, feel free to try this method on your devices. Just know that I am not responsible for any damage or anything else should your bricked-phone-situation go from bad to worse.
********REQUIREMENTS********
1. microSD card ---> You need one of those adapter things to access the microSD card on your computer. We're going to be moving files to this little guy.
2. TWRP recovery --> We're going to be flashing a zip so stock recovery won't work here. Don't worry, once we flash the zip, TWRP will be gone
3. HuRUpdater_0.3.zip --> I know there is a HuRUpdater_0.2.zip too but I used HuRUpdater_0.3.zip when I unbricked mine so . . . that's what we're gonna use. You can download it here: https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279 Don't forget to thank the developer!
********STEPS********
1. First things first. Download these three files:
update.zip
update_full_BND-L24_hw_usa.zip
update_data_full_public.zip
2. Once downloaded, rename them as listed here. THIS STEP IS NOT OPTIONAL
update_full_BND-L24_hw_usa.zip -----> update_all_hw.zip
update_data_full_public.zip -----> update_data_public.zip
DO NOT RENAME update.zip
3. Make a folder on the microSD card. You can name it whatever you would like. For the purposes of this guide, I named mine "Recovery". Move all four of the zips (or archives, whatever you wanna call them) that you downloaded to this new "Recovery" folder. Then eject the microSD card.
4. Insert the microSD card into your paperweight, I mean bricked Honor 7X. Then boot into TWRP.
5. In TWRP, tap on "Install". Then browse to your external SD card and tap on "HuRUpdater_0.3.zip". Swipe to flash it.
6. Once everything finishes installing, tap on "Reboot" then "System" (I have no idea why you would want to install the TWRP app if you don't have TWRP anymore but . . . to every man his own). When the unlocked-bootloader-warning screen pops up, press and hold the volume up button to boot into eRecovery. Perform a factory reset from there.
7. After the factory reset is completed, say hello to your now fully functional device.
Giving this a try right now. Will report back. Thank you so much!
After flashing HuRUpdater_0.3.zip and holding volume up, it just boots back into TWRP?
Edit: Never mind, I'm dumb and didn't press volume down during the flash.
---------- Post added at 04:46 AM ---------- Previous post was at 04:17 AM ----------
IT WORKED! Thanks so much!!!!!
One error in your directions though:
update_data_full_public.zip -----> update_full_public.zip
should be
update_data_full_public.zip -----> update_data_public.zip
ekovv said:
After flashing HuRUpdater_0.3.zip and holding volume up, it just boots back into TWRP?
Edit: Never mind, I'm dumb and didn't press volume down during the flash.
---------- Post added at 04:46 AM ---------- Previous post was at 04:17 AM ----------
IT WORKED! Thanks so much!!!!!
One error in your directions though:
update_data_full_public.zip -----> update_full_public.zip
should be
update_data_full_public.zip -----> update_data_public.zip
Click to expand...
Click to collapse
Fixed. Thanks for spotting the mistake.
Any known way to get TWRP first? I don't have it and erecovery seems to not install firmware
fitkidgil said:
Any known way to get TWRP first? I don't have it and erecovery seems to not install firmware
Click to expand...
Click to collapse
Download HWOTA8. After you extract it there is a twrp image in it. There is also a stock recovery image in it incase something goes wrong. There is a thread here on twrp. You will come across a twrp image by sudeep. You can use it too. Although it didn't work perfectly for me. Use adb or multitool to flash them
my phone is bricked... thus the bootloader is locked... i cant flash to it.
Bricked as in display won't turn on?
when i turn it on, it comes up to erecovery, "download latest version and recovery" will connect to wifi but fail to download. Multi-Tool says bootloader is locked as well.
fitkidgil said:
when i turn it on, it comes up to erecovery, "download latest version and recovery" will connect to wifi but fail to download. Multi-Tool says bootloader is locked as well.
Click to expand...
Click to collapse
Try to use the service rom.
The erecovery thing does not work, exceptaybe on Chinese version of rom, it seems
Thank you so much! I have tried every other method on this forum over the past few months and wasted countless hours. I could not get ANY other method to work. This worked perfectly the very first time. Thanks!!!
Not sure what you mean by use the service rom... I can't flash the ROM because the bootloader is locked.
fitkidgil said:
Not sure what you mean by use the service rom... I can't flash the ROM because the bootloader is locked.
Click to expand...
Click to collapse
The service rom does not need unlocked bootloader.
You do need your unlock code though.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Is there still a way to get the code? I haven't been able to get it
****, I ****ed it up.
Started installing the file without first renaming. TWRP is gone and now I have no way install those files. bootloader is "soft" locked and I'm ****ed...
renatofontes said:
****, I ****ed it up.
Started installing the file without first renaming. TWRP is gone and now I have no way install those files. bootloader is "soft" locked and I'm ****ed...
Click to expand...
Click to collapse
There is an option to use bnd-l21 service rom. Which will allow you to boot and unlock bootloader again. Then start over with hurupdater.
mrmazak said:
There is an option to use bnd-l21 service rom. Which will allow you to boot and unlock bootloader again. Then start over with hurupdater.
Click to expand...
Click to collapse
Thanks!
---------- Post added at 08:01 PM ---------- Previous post was at 07:14 PM ----------
I got some errors when running the Hur Updater
I'm currently redownloading the files hoping there were download incorrectly the first time or something...
I finally got it working, but I can't install updates. Anyone else have this issue?
I need help
First, I did something and now when it boots it doesn't show the honor logo but it shows the huawei logo and can't progress farther (I swear I didn't try to install another OS)
Second, I can't access twrp but can access fastboot. I have downloaded twrp and was able to access it before I messed up even more to the point that it doesn't show the honor logo
In the fastboot screen, it says PHONE Relocked but when I type in fastboot oem get-info in the terminal of my computer with my honor 7x connected to it and fastboot screen it says (bootloader) unlocked ,so I'm not sure if the bootloader is actually locked or unlocked
So what I'm not sure about is what can I do to access TWRP. I tried installing it again but it didn't work either user error or it's just not possible to
All your help will be very appreciated because I don't have money to get another phone
i really shouldn't have done any of this knowing that I don't have money to get another phone
edit:
I don't think the OEM is unlocked like the thingy from the developer options because I don't see FRP in fastboot screen, just PHONE Relocked
mrmazak said:
The service rom does not need unlocked bootloader.
You do need your unlock code though.
Service rom BND-L21C432
https://www.androidfilehost.com/?fid=11050483647474828964
1. Unzip download
2. copy the dload folder to root of sdcard
3. power on phone holding all three buttons
4. After phone finishes and reboots, unlock frp and bootloader, if needed
5. Use Huru or HWOTA to flash correct firmware for your model/ region.
Click to expand...
Click to collapse
thank you so much for this. I was able to downgrade and read my code to unlock.