Hi developing
My phone is a7 2016
My last rom is scube_ nfe.... but suddenly my phone is turn off and when I was restart show me "from lock block custom binary" then I flashed new officials rom but last custom Rom app has stopped and it seems like not format ... then I format and wipe and flashed official rom ... but now boot animation from last rom and some bugs from last rom in new rom
Now what should I do?
Related
Hi,
Guys I need your help on this one.
I sold my A500 almost a year ago to a friend of mine. At that time I flashed it with a HC ROM and Recovery 1.3.4.
Last week the new owner of the tabled asked me for help updating the ROM to JB. Since now I use a Samsung Galaxy I completely forgot on the correct procedures to update the Acer A500. I simply downloaded a 4.2.2 Rom and tried to flash it on recovery mode.
After that I'm stuck with an endless loop. The tabled boots, pass the Acer logo, shows the ROM logo screen and than boot again.
Since I can still acess the recovery screen (it still shows 1.3.4 recovery) I tried flashing other ROMs with no sucess. Every room that uses the Aurora installer freezes as soons as Aurora Installer message shows on the screen. So I wasn`t able to flash a new Rom or a new Recovery (since all the Roms and recovery that I have found uses the Autora installer).
I also tried to install an older room (Tried the Lightspeed 2.1 ROM) and although I was able to flash it and reboot from recovery, it stops on the boot screen after that (I waited for 4 hours).
Can you guys help me with this one? Also, do you guys know if I can install a new Recovery using Odin?
Thanks
Anyone?
Maybe you should try flashing stock rom. Download 》rename it to update.zip》install from sd card or use EUU roms.
poslato sa elmag radija
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
statiicz said:
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
Click to expand...
Click to collapse
I am having EXACTLY the same problem here!!! It happened after I flashed stock BTU (UK unbranded) and then trying to revert back to BlissPop/CM13. Maybe the new stock boot/modem is not supported by custom ROM makers yet?
Could anyone confirm/solve this? Thanks a lot!
statiicz said:
Hello Every One
I Have A Problem With my Phone Samsung Galaxy S5 (SM-G900F) I was Having a resurrection remix Rom on my phone then i have booted an Official Marshmallow Rom Then it have been slow so i have flashed Rom resurrection remix Again and here is the Problem when i flashed it it flash normally when it goes to the resurrection remix Logo it doesn't open and stay showing the logo
i have restarted several times and it doesn't open so I Have tried to flash cyanogenmod Rom then it goes on the logo of the cyanogenmod Rom then the Phone Restart .
Please Help .
SOS !!
Click to expand...
Click to collapse
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Shadow Assassin said:
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Click to expand...
Click to collapse
(I'm #2) Did all the usual wipes. No problem with stock rom, but cannot boot after flashing any custom ROMs like CM13.
Shadow Assassin said:
Just verifing. When flashing a new rom, you are clearing the old one out first, right?
Like wiping the cache, system, boot,ect.
Click to expand...
Click to collapse
Yes I Wipe All The Data With TWRP Recovery And i Have tried with CWm Recovery And Philz touch recovery either
And the is no changes it stuck !!
spolarbear said:
(I'm #2) Did all the usual wipes. No problem with stock rom, but cannot boot after flashing any custom ROMs like CM13.
Click to expand...
Click to collapse
statiicz said:
Yes I Wipe All The Data With TWRP Recovery And i Have tried with CWm Recovery And Philz touch recovery either
And the is no changes it stuck !!
Click to expand...
Click to collapse
Sorry its taken me so long to reply back, had stuff going on. Anyways, after doing some studying and playing with my sisters G5. They seem to be very finicky with modifications, even after root and a custom recovery installed. One thing to try (because it happened on my skyrocket), is to reinstall your recoveries and do it with a computer, that how to get a stable install, if your already using a computer, then it sounds like a something from the old firmware may still be their. You may need to install the earliest stock firmware for your G5 out of the box, and root it from their, you may even need a complete stock restore then re-root and install your custom recovery. Also. I have had some roms take 20 minutes to boot, but thats the rom stabilising.
Sent from my LG-H900 using XDA-Developers mobile app
Okey.. So I used to flash many ROM on my Xiaomi Redmi 3s prime and they were very stable and awesome also I had flashed RR nought ROM and used to work well but it was a buggy ROM so I flashed another 6.0.1 rom stable ROM and few days later I found stable nought ROM but when I flash them then it show boot animation (loading screen) like for 1min and then get stuck and then automatically gets turn off I tried many times to start but got same results but i can flash marshmallow ROMs but not nought ROM and also like 4-5months ago when I was using 7.0 ROM and then got back to older then my WiFi and Bluetooth stopped working :crying:
Flash wifi and modem patch provided with custom roms in there thread or if every this is right i.e you flash all patches then try to wipe your data partion or factory reset your phone.Take back up your data before doing factory reset.
I had that with RR official rom latest. I just had to disable DM thingy after wiping dalvik and then boot to system. The first boot will kind of not go past beyond the RR animation and then I have to powercycle once and then everything was the way it should be. The latest RR also has Magisx which will not boot the phone if you have some other root like SuperSU for some reason.
In short after making the backup through TWRP, wipe the lot using the advanced wipe, install the RR ZIP and wipe dalvik install pico Gapps (some reason Aroma version didn't work) wipe Dalvik and disable DM and then boot system If it gets stuck in the RR animation for longer than 3-5 mins in the first boot just hold the power button to cycle it once and it should work.
As The Lineage OS 15.1 is on the Xda forum and I saw it and downloaded and flashed the rom without any problem and after i was done with testing the rom i wanted to go back on stock rom and after flashing stock oreo 7.12.29 the phone boot into the setup and after setting fingerprint it keeps on restarting I tried to reflash the stock rom but it did the same afterwards i though of flashing lineageos again I tried to root it and did the same procedure as before but the phone this time did not booted into the lineage os rom and just stuck on the boot....
also when the phone boots into the setup it did not detect my simcards What to do ????
Help Me Guys Please.....:crying:
Hello
reflash last stock rom this is gonna help
Yes I tried doing that but now my phone boots with no IMEI what to do help please ,?
I have a j3 2016 (j320fn to be exact) and i recently decided to download twrp and flash a rom, i flashed a marshmallow port from j210f and it worked , i was so happy, but one day i went into developer options and i accidentaly disabled them, i turned them on again but forgot to turn on OEM onlock, the next day i turned on my device it couldn't boot, it just said frp lock, so installed the stock firmware with Odin, and the device worked again, i installed twrp again to flash the rom, but this time, things were different, i wiped dalvik, cache, system, etc... and flashed it. It booted into the rom, but when it was on the select language part, it restarted and bootlooped, can somebody please help, i adore this rom and i dont want to have the stock one