Hi, I recently was testing with my device, but I changed to a wrong firmware. After installing the firmware I got stuck on a infinite loop of the "SAMSUNG" logo.
I tried Smart Switch, but my device was rooted and the Knox waranty was lost, so I couldnt restore the original firmware through apps like Smart Switch.
I tried flashing so MANY firmwares, but none of them worked, having this error on all of them:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I discover that the cm.bin error ocurre when the firmware was from a different country.
After that I checked the in the recovery mode and the download mode.
The download mode said I have a SM-G928F (My original model) idk wich country it was from, and how to discover it
A)nd the recovery say I have a MMB29K SM-G928TUVU2DPD1 .
At this point im so confused and desperate, I though that you couldnt flash to other firmware that have a different region or carrier code. Idk what firmware model I should flash, and what is the actual firmware number that I have. (I tried flashing firmwares for SM-G928F abd SN-G928T)
Please, if someone know how to fix it would be very helpfull
PD: Sorry for the bad grammar, im not very good at english
Edit: I tried factory reset from recovery, but it sais E:failed to mount /preload (Invalid argument), and when I reset nothing change, I think its posibble that I have issues with the recovery, I installed TWRP and went back to normal recovery with the Fonelab App :/
Hello,
It's incredible. I've the same problem, I have a Galaxy S6 edge+ (G928F) and my phone is never rooted. And yesterday, for no reason when I was just watching as every night a series on Amazon Prime Video, my phone reboot.
I've battery problem, so sometimes my phone just get off and reboot again for no reason, but this time I had the Samsung start logo just freezed.
I tried to flash my phone with an official rom but I had exactly the same error as you shown.
Anyone could help us ?
I'm from France with a french model of G928F.
Yeah, you should flash a new ROM for your S6 edge+. This Android system repair can help to install a new firmware for your S6
https://www.youtube.com/watch?v=zXSHe3oorIM
Related
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Click to expand...
Click to collapse
hello. have you tried another version of odin? im sure someone can help you revive your phone
Mine did the same thing,put it into download mode and flash cwm recovery and it'll come to life..
hypnodaz said:
Mine did the same thing,put it into download mode and flash cwm recovery and it'll come to life..
Click to expand...
Click to collapse
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Mamba25 said:
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Click to expand...
Click to collapse
You will have to flash stock firmware 4.4 before your phone will work again. Simply flashing cwm will get you to cwm recovery but not a working phone.
---------- Post added at 09:37 AM ---------- Previous post was at 09:31 AM ----------
Mamba25 said:
Thanks, once I have used Odin v3.09 to flash cwm recovery, will I still need to flash back to stock or will it simply work?
Click to expand...
Click to collapse
Have you tried using Odin V3.09 to flash 4.4?
hey_joe said:
You will have to flash stock firmware 4.4 before your phone will work again. Simply flashing cwm will get you to cwm recovery but not a working phone.
Click to expand...
Click to collapse
Hi, I have found a tutorial on flashing ClockworkMod Recovery v6.0.4.5 but it states:
"Must enable USB Debugging first" and also "Must let Reactivation lock off first", is this absolutely necessary as I can't access my phone, let alone its settings? Can I still proceed with installing ClockworkMod Recovery?
Mamba25 said:
Hi, I have found a tutorial on flashing ClockworkMod Recovery v6.0.4.5 but it states:
"Must enable USB Debugging first" and also "Must let Reactivation lock off first", is this absolutely necessary as I can't access my phone, let alone its settings? Can I still proceed with installing ClockworkMod Recovery?
Click to expand...
Click to collapse
Don't follow that one.
Go here and download the right file for your phone's model, put phone in download mode and flash using odin in ap/pda slot.
Btw, have you tried flashing 4.4 using odin v3.09?
When odin gives you the fail message technically you've already flashed the stock, but for some reason odin doesn't recognise it as a pass. .leave your phone plugged in, reset odin, put your phone into download phone and then flash recovery. . Hey presto your phone will wake up..
hypnodaz said:
When odin gives you the fail message technically you've already flashed the stock, but for some reason odin doesn't recognise it as a pass. .leave your phone plugged in, reset odin, put your phone into download phone and then flash recovery. . Hey presto your phone will wake up..
Click to expand...
Click to collapse
I don't think this is the case because when I first tried flashing from 4.3 to 4.4.2 it tried for a few seconds then failed and been stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“ despite resetting Odin and going back into download mode, tried reflashing but keep getting the 'FAIL' (logs posted in original first post).
Is there any reason why my phone is being detected as 'Samsung GT-S5690' in MobileGo? I'm thinking if Kies could detect it as the Note 3 again my problems would be solved.
I haven't tried Odin v3.09 because to be honest I thought the firmware file once extracted as a RAR file could only be read by Odin v3.07 is that not the case?
Soz everyone
Mamba25 said:
I haven't tried Odin v3.09 because to be honest I thought the firmware file once extracted as a RAR file could only be read by Odin v3.07 is that not the case?
Soz everyone
Click to expand...
Click to collapse
No it's not.
Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
“Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“
I have looked extensively through the threads already started but couldn't find a solution particularly as Kies is not recognising my device anymore stating it is an unsupported device, furthermore, 'MobileGo' software is showing the device as being a 'Samsung GT-S5690', instead of Note 3??. I tried Odin to recover back to original firmware but failed both times and phone now stuck on “Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again“.
My Mobile details are:
Model Number: SM-N9005
Serial Number: RF1DA5NMM5M
This is a log of 2 different attempts using Odin, one to 4.4.2 and the other back to stock:
Odin3 v3.07
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUDMK2_N9005OXADMK2_N9005XXUDMJ7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB3_N9005OXXENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<OSM> All threads completed. (succeed 0 / failed 1)
Please advise as I am left without a phone and only had it two months.
Your expertise and help would be gratefully appreciated.
Many thanks
John
Click to expand...
Click to collapse
looks like u r trying to flash 4.3 & 4.4 one after one, now dont try 4.3 at all, make sure kies is not running in baground, disable antivirus if any.
I had the the same issue with kies myself, tried every trick in the book before I tried the method I mention above.. maybe it's an issue with the phone itself, or a certain batch of phones?
Mamba25 said:
Hi all,
I've heard great things about this website and joined up hoping to God you could help me. I tried updating the firmare on my phone to 4.4.2 from 4.3 using Odin3 v3.07 and it stopped suddenly with an error message and now my Note 3 continuously displays:
...
Click to expand...
Click to collapse
The writing of stock 4.3 fails since your bootloader was updated by your failed attempt. You will probably never be able to write a 4.3 stock image.
The writing of 4.4 NB1 fails since probably it is for a slightly different region with a slightly different partitioning scheme. Ideally install the 4.4 for your specific model/region. If that fails you might need to write some 4.4 with repartition - there are some threads around (I think also the Hong-Kong version had serious problems with 4.4 because of that).
xclub_101 said:
The writing of 4.4 NB1 fails since probably it is for a slightly different region with a slightly different partitioning scheme. Ideally install the 4.4 for your specific model/region. If that fails you might need to write some 4.4 with repartition - there are some threads around (I think also the Hong-Kong version had serious problems with 4.4 because of that).
Click to expand...
Click to collapse
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Mamba25 said:
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Click to expand...
Click to collapse
There is AP in 3.09 in place of PDA.
Mamba25 said:
I saw the Hong Kong thread and to be honest got lost reading the posts, i'm beginning to think this is going to be a task beyond my capabilities as not the most technologically minded of people and need to be spoon fed. Is there an easy way to find out if I have a Hong Kong version phone? I brought it from e-cell on Ebay a couple of months ago?
If using a different version of Odin such as v3.09 once the firmware file is extracted where does it go as v3.07 is goes in the PDA section?
Many thanks
Click to expand...
Click to collapse
I don't think there is an easy way to see what the original version was as long as you can no longer boot the phone. I think the EU model is generally listed as N9005ZWE while the HK is N9005ZKA and that might be written somewhere on the box. Also it might be a different partitioning model even if it is not a Hong-Kong model.
xclub_101 said:
I don't think there is an easy way to see what the original version was as long as you can no longer boot the phone. I think the EU model is generally listed as N9005ZWE while the HK is N9005ZKA and that might be written somewhere on the box. Also it might be a different partitioning model even if it is not a Hong-Kong model.
Click to expand...
Click to collapse
Could you please let me know if the update be completed successfully. I have the same problem so want to know the steps of the
same. Please help me.
madsus said:
Could you please let me know if the update be completed successfully. I have the same problem so want to know the steps of the
same. Please help me.
Click to expand...
Click to collapse
I've taken the phone to a repair shop recommended by Samsung themselves, they've had it a week now and I rang yesterday and they said it is the first Hong Kong Note 3 they've received and are waiting to hear from Samsung as to how to repair it. BIG YAWN!
Will keep you posted - miss my phone
Note 3 SM-N9005 firmware upgarade issue
Hi , i am having the same problem in my Note 3 i upgraded phronesis rom and after the phone was not detected in computer. so tried to flash custom kitkat rom again then it got disconnected and then showing error as firmware upgrade issue,
tried to download firmware and update by Odin, tired cmw recovery and tried many firmwares, Odin shows Failure and Kies dosent shown code or phone in emergency recovery , all ways failed, is it possible to make the phone work normal.
Hey everyone,
I got this problem, today i wanted to whipe my phone... But i failed and also whiped the OS... So i was stuck on samsung logo.. After i got into download mode i tried to flash the standard unbranded S4 called:I9505XXUFNC4_I9505PHNFNC1_PHN
After i tried to flash that as PDA with ODIN v3.04, it says it failed..
What to do now?
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUFNC4_I9505PHNFNC1_I9505XXUFNC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> Complete(Write) operation failed.
<ID:0/005> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I used the official cable ...
Any options?
EDIT:
Now when i boot the phone it only says:
Firmware upgrade encountered an issue.Please select recoverymode in Kies & try again.
Tunestwo said:
Hey everyone,
I got this problem, today i wanted to whipe my phone... But i failed and also whiped the OS... So i was stuck on samsung logo.. After i got into download mode i tried to flash the standard unbranded S4 called:I9505XXUFNC4_I9505PHNFNC1_PHN
After i tried to flash that as PDA with ODIN v3.04, it says it failed..
What to do now?
I used the official cable ...
Any options?
EDIT:
Now when i boot the phone it only says:
Firmware upgrade encountered an issue.Please select recoverymode in Kies & try again.
Click to expand...
Click to collapse
just repeat procedure, change odin version, change usb port, change usb cable....
samersh72 said:
just repeat procedure, change odin version, change usb port, change usb cable....
Click to expand...
Click to collapse
no effect so far.... T.T
Try it on another pc
Or
Download another firmware
I had the same issue yesterday phone stoipped working got andropid.phone errors and phone would not make or take calls when go to dialer kept crashing and black screen tried wiping/factory reset and still had same issue on djembey stock pre root
I decided to then download stock EE firmware latest 4.4.2 this then failed and phone after this would not even boot up only thing I could manage to do now was to put into download mode would no longer even go into recovery mode either
I tried flashing about 4times and ODIN kept on failing tried with Odin 1.85, 3.04 3.07
FED up I read somewhere to try diff cable ( like that will make a diff I thought)
YESSSSS it flashed and now I have a working phone
After using, diffrent pc's, diffrent cables, and diffrent usb ports...
it worked... Jezus i love you guys!
Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!
If you can access download mode, your phone is not bricked.
Simply download last firmware for your model from sammobile, and flash it with odin...
ok thanks, will do.
But how do I safely root the note 4 5.1.1? CF-Autoroot isnt compatible
Ok, I just finished download a stock rom for my phone (.tar.zip) but when I click start in Odin it always fails for some reason...<ID:0/003> Can't open the serial(COM) port.
Edit: tried a different port now it fails at:
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
What can I do?
Does upgrading via Kies will result in losing all data?
I'm working on this issue for hours now but I'm stuck
Using Odin it will fail at sboot.bin
And kies doesnt recognize my note 4
Here's the log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone: SW REV. CHECK FAIL, DEVICE 2, BINARY 1
Nixdax said:
Hey guys,
i tried to flash my note 4 using the openrecovery method
but i forgot to flash the kernel and now my phone is stuck in the booting at the Samsung symbol. Can someone please help? i can still get into the download mode
Thank you!!!
Click to expand...
Click to collapse
Restore your backup in recovery
What is your exact model, G or F, what? You download the ROM from sammobile with your exact model no., and then flash.
It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........
Never heard about the H version before! Anyway, make sure you are flashing the correct Xposed, that is Wanam's, but Arter's, and read the installation instructions closely.
Nixdax said:
It's N910H
I resolved it by recovering my phone via Kies though I lost all my data
Then I tried to install Xposed framework and now it's stuck in the bootloop again ...........
Click to expand...
Click to collapse
Please, search before flash.
H model is with Exynos processor.
http://www.sammobile.com/firmwares/database/SM-N910H/
So ive been trying to root for a while and nothing seem to work its a snapdraggon CPU when i use cf-auto root i brick my phone when i try to root via TWRP nothing happens when i try to flash an official samsung firmware it fails at CM.BIN im on 6.0.1 and anything i do either bricks it or nothing happens an i stay unrooted with original firmware.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> A510FXXU2APD5_A510FEVR2APD4_A510FXXU2APD4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1005)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> NAND Write Start!!
<ID:0/005> cm.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
alexsheff said:
So ive been trying to root for a while and nothing seem to work its a snapdraggon CPU when i use cf-auto root i brick my phone when i try to root via TWRP nothing happens when i try to flash an official samsung firmware it fails at CM.BIN im on 6.0.1 and anything i do either bricks it or nothing happens an i stay unrooted with original firmware.
Added!!
Enter CS for MD5..
Check MD5.. Do not unplug the cable..
Please wait..
A510FXXU2APD5_A510FEVR2APD4_A510FXXU2APD4_HOME.tar.md5 is valid.
Checking MD5 finished Sucessfully..
Leave CS..
Odin engine v(ID:3.1005)..
File analysis..
SetupConnection..
Initialzation..
Get PIT for mapping..
Firmware update start..
SingleDownload.
sboot.bin
NAND Write Start!!
cm.bin
FAIL!
Complete(Write) operation failed.
All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Simple - wrong firmware for your device.
Twrp, nothing happens? - you need to give details.
ashyx said:
Simple - wrong firmware for your device.
Twrp, nothing happens? - you need to give details.
Click to expand...
Click to collapse
it is 100% the correct firmware i downloaded it on samstock for EE (EVR) stock 6.0.1 and 5.1.1 both wont install via odin and samsung tools pro. ive flashed twrp following your guide and that worked but installing super su just gave me the app and no binary files were installed, cf auto root just boot loops me the only tike im able to install any firmware is through emergency recovery on smart switch
alexsheff said:
it is 100% the correct firmware i downloaded it on samstock for EE (EVR) stock 6.0.1 and 5.1.1 both wont install via odin and samsung tools pro. ive flashed twrp following your guide and that worked but installing super su just gave me the app and no binary files were installed, cf auto root just boot loops me the only tike im able to install any firmware is through emergency recovery on smart switch
Click to expand...
Click to collapse
If part of the firmware doesn't install then it is not the correct firmware for your particular device, simple.
The bootloader does a sanity check via Odin on any firmware attempted to be installed.
If it doesn't meet the requirements it fails to install.
It's pointless arguing the case because it's a fact and I've been down this road with others who have eventually got the correct firmware of which you've almost proved my point by stating that downloading through Smartswitch installs the correct firmware.
Several factors come into play, model, carrier, region and revision.
Any of these mismatch and installation could potentially fail. Simply being the right model no. isn't enough.
You could probably help yourself if you post more details:
Exact firmware your device is currently running, the firmware you are attempting to install and screenshots or post a log of the output from odin and the info provided on the device display itself after failure.
I got the device on contract with EE so i thought it was locked to EE, my partner bought me a S7 (flat) on vodafone so i put the voda sim into my A510F n it seems to be unlocked to voda not quite sure why i always thought they was locked to the network if it was a contract device, could it possibly be a vodafone stock rom or any other network.
alexsheff said:
I got the device on contract with EE so i thought it was locked to EE, my partner bought me a S7 (flat) on vodafone so i put the voda sim into my A510F n it seems to be unlocked to voda not quite sure why i always thought they was locked to the network if it was a contract device, could it possibly be a vodafone stock rom or any other network.
Click to expand...
Click to collapse
Post the details as requested above and we'll get it sorted.
Ok i have searched the site for an exact answer to the issue i have encountered, with not getting a specific answer to my question. If there is already a thread for my exact problem, or two to solve the two issues i have encountered, please share the link, thank you.
My Wife and I got her son a Galaxy J3 (SM-J320fn) open network, with a Giff Gaff sim, from Argos. Its his first phone and we wanted to see if he could look after it, and if so, we would get him a better model at Christmas. Now his dad wanted to put google family link on the device, and due to it being only android 5.1, this was not possible. This sparked a huge row between my wife and her ex, with him being a general ****. I have tinkered with PC's and X-box 360s before, and thought i could have a go at Rooting the device and installing a custom android 7 rom. I didn't go into this lightly, and read that XDA was the very best place to seek advice and guides. I read up on rooting the device i had, Odin,TWRP and the OS linage android 7 rom. I was comfortable, that although it was very in depth to my skill set, i felt i could do it. I followed the guide to rooting the J320fn, installing the drivers, and USB debugging, fired up ODIN as administrator and installed TWRP, from there i followed the guide to install the custom ROM after than.
all was fine. device was android 7 and google family link was installed. everybody was happy...
My step son left his phone in the school office after his football match after school the other day and the device powered down for the first time since i uploaded the custom rom. When powering up the device we got the custom binary blocked by FRP lock issue. ok... so i came back here to XDA to read a thread about that. i decided that maybe i should have looked into other parental apps instead of messing about with the phone. so i went down the root of restoring the stock firmware and to battle it out with the dad about using a different parental app. so i downloaded the stock firmware for the device, and put the device into download mode. i ran ODIN but the install failed and on the device the loading bar at the bottom was about 5mm into the download and nothing else moved... ****... ok... now what? i took out the battery, and then powered up again. "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again" ... Oh man, now what. so i return back XDA to look at this. read the guide and went to KIES3 to install stock firmware, but kies doesn't seem to recognise my device model? i click the emergency firmware recovery, but lists no device to recover?
so now im searching frantically to solve this... i downloaded the stock firmware from SamMobile; J320FNXXU0ARA1_J320FNEVR0ARA1_J320FNXXU0ARA1_HOME.tar.md5 (which took like 17 hours.. meh) and that Fails in ODIN too...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> nvitem.bin
<ID:0/003> PM_sharkl_arm7.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
then i read to try install TWRP again, which also didn't work either as that brought up the binary blocked by FRP again and Failed in ODIN.
"<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1100)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
So now i really don't know what to do... is it bricked? any and all help would be much appreciated.
Thank you
Rob