Hi after instaliing stock rom via twrp when i switch fone off is automatically boot into fastboot mode and when i click start boot into system ? can you help me how to fix this ?
Same Here, How To Rid of This Issue ?
Flash the whole firmware again. Use RSD LITE.
RSD lite? can you be more precise ? what is that sorry I am new here
ok got it
uranex25 said:
Hi after instaliing stock rom via twrp when i switch fone off is automatically boot into fastboot mode and when i click start boot into system ? can you help me how to fix this ?
Click to expand...
Click to collapse
You tried to install a factory stock ROM with twrp recovery? I should read some more threads before you start flashing ROMs. You can only flash factory stock ROMs with your PC and fastboot/adb drivers installed and software like rsd lite.
fastboot oem fb_mode_clear
squid2 said:
fastboot oem fb_mode_clear
Click to expand...
Click to collapse
Thanks A Lot.
Found a way to reboot to edl mode from fastboot
All credits to @emuzychenko
1) Download modified fastboot file
2) Reboot your phone to fastboot
3) Double click on edl.cmd
4) You are on 9008/edl mode
5) Flash any fastboot image from Mi flash
You successfully unbricked your device
Hi
Try with that method also. It seams to work .
Next time I brick it again (trust me, it will happen) I will give those a try.
This is the solution www(dot)htcmania.com(/)showthread(dot)php?t=1163463
Cheked by me, the brick was to try to unlock the bootloader without the Xiaomi message.
Sorry for my english, bu ti hope to be helpful.
To restore the default Bootloader copy paste the emmc_appsboot.mbn from Fastboot Rom to the Adb foldee
and type command on cmd
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot reboot
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
parfetto said:
Hi
Try with that method also. It seams to work .
Click to expand...
Click to collapse
this method only works for few very people, everyone cant access adb through recovery.
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
IT WORKS
apixbuanget said:
For those who have failed and stuck on "HS USB 900E" and the bootloader stick locked here is the solution :
1. Enter fastboot by holding vol down + power
2. Plug your RN3Pro to PC
2. Flash original bootloader from official fastboot firmware
fastboot flash aboot emmc_appsboot.mbn
fastboot flash abootbak emmc_appsboot.mbn
3. Type again :
fastboot reboot
and quickly hold volume up untuk it enter "sideload" mode
4. Install Mi PC Suite from this link en.miui.com/thread-225600-1-1.html
5. Let the Mi PC Suite download the latest chinese firmware, just sit and wait until it done
6. Lets Brick the beast again
Click to expand...
Click to collapse
Worked like a magic. I can confirm for sure. Was stuck at HS USB 900E with locked bootloader.
Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Dharani_V said:
Yeah i bricked mine with twrp .. and i cannot enter into recovery mode now.. only fastboot works and i cannot flash stock recovery too because the bootloader is locked :/ stupid Mi :/
Click to expand...
Click to collapse
So, did you try above mentioned method?
amsmu said:
So, did you try above mentioned method?
Click to expand...
Click to collapse
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
failed bro, getting error device is locked using QFIL.:crying:
Guys, please mention the reason behind your device getting bricked too when you are reporting what worked and what didn't. Like whether during unlock bootloader process(without xiaomi's permission) or flashing custom ROM(most probably MIUI official updates) via twrp.
Dharani_V said:
Yes i did .. and its not allowing me to flash anything .. Getting Error Device is locked :/
Click to expand...
Click to collapse
What were you doing when it bricked?
Go to service center. They will repair it
mine happened same..... hard bricked my mobile after restoring original bootloader.......
QFIL cannot do a thing ..... all the eror i get is unable to go to EDl mode......
nothing for me except download mode and fastboot......
so toook to service centre and got it repaired for free in 2hrs
puli where do u live[emoji14]
Sent from my Redmi Note 3 using XDA-Developers mobile app
Rajdip said:
Have you tested this method yourself? I think this is for people who bricked the device but had stock recovery inside, what about people who has twrp and bricked the device? Also I dont think you can flash anything through fastboot in locked bootloader
Click to expand...
Click to collapse
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Rajdip said:
I have found few ways by which people may unbrick from HS USB 900E state without test point, but those guides are for other devices, needs thorough testing for Redmi note 3.
Tools needed:-
1) QPST http://www.androidbrick.com/downloa...qcn-for-lollipop-android-5-0-6-0-marshmallow/
2)Nubia tool studio https://drive.google.com/folderview?id=0BwtoIMKf470SRUxfdHA5cU14ZTQ#
Now follow these guides for reference,
1)http://www.androidbrick.com/ultimat...ide-snapdragons-are-unbrickable-qhsusb_dload/
2)http://www.androidbrick.com/unbrick...-you-have-the-right-kind-of-rom-qhsusb_dload/
Only people with hardbrick(900E) and locked bootloader can this test methods, Please try and leave your feedback, maybe we will find a way to unbrick without opening the phone and voiding warranty. Good Luck
Click to expand...
Click to collapse
Does anyone success ? Please share a guide !
apixbuanget said:
i've tried this myself. In HS USB 900E you can flash aboot through fastboot whether you stock recovery or twrp before bricked.
Click to expand...
Click to collapse
wow!!! thats great, but before you flashed aboot through fastboot did you check whether your bootloader was locked or not?
Hi, Can somebody tell me if its necessary to unlock the bootloader before flashing the official firmware. My device is not rooted and has a locked bootloader but as I wanted to flash the original firmware to refresh it, I was wondering if I can do it without unlocking the bootloader.
Thanks in advance.
Check this thread for EDL Mode https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292. Reboot to EDL Mode and flash using MI Flash Tool. This flashing not reuqires bootloader unlock.
sarath medithi said:
Check this thread for EDL Mode https://forum.xda-developers.com/an.../guide-how-to-reboot-to-edl-fastboot-t3394292. Reboot to EDL Mode and flash using MI Flash Tool. This flashing not reuqires bootloader unlock.
Click to expand...
Click to collapse
Sorry but that is not correct, the A1 uses just fastboot, we don't use EDL.
Anyway just follow this guide
http://en.miui.com/thread-807252-1-1.html
You just need to install miFlash or use fastboot commands if your more advanced, reboot to bootloader
Hello
When I go to fastboot mode on my LG K8 it just reboots my phone, i read up that the fastboot mode needs to be unlocked because LG has made fastboot mode so locked down i can't get to it
How so I unlock fastboot so I can flash a custom recovery?
It really doesnt matter if i softbrick my phone because i can just restore the firmware
mattwhite7102 said:
Hello
When I go to fastboot mode on my LG K8 it just reboots my phone, i read up that the fastboot mode needs to be unlocked because LG has made fastboot mode so locked down i can't get to it
How so I unlock fastboot so I can flash a custom recovery?
It really doesnt matter if i softbrick my phone because i can just restore the firmware
Click to expand...
Click to collapse
no
Nihat2003lol said:
no
Click to expand...
Click to collapse
thanks but our replying to such an old post, this phone is long gone
Hi,what's the difference between normal rom and fastboot rom?
Pheggas said:
Hi,what's the difference between normal rom and fastboot rom?
Click to expand...
Click to collapse
You flash the fastboot rom through fastboot by using mi flash tool. You flash normal rom through TWRP.
Zip is for Recovery (that's why it's called Recovery firmware/rom) and Fastboot firmware/rom is for MiFlash.
Edit: @Zenkrey was faster
Thanx! you really helped me