Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
What's working:
Boots
RIL (Calls, SMS, Data)
WiFi
Bluetooth
Audio
Video Playback
Sensors
Flashlight
GPS
Notification Slider
Off screen gestures
Camera
Known issues:
You tell me.
Features:-
-4k video recording
-Signature Spoofing support for MicroG
FAQ
Q What is MicroG?
A https://lineage.microg.org/
Q Playstore error RH-01
A Delete google account and recreate it.
Q Error 7 in twrp
A Get TWRP from Download section
Q Where is MicroG flashable zip?
A https://downloads.nanolx.org/NanoDroid/Stable/ - Download the file NanoDroid-microG-xxxxxx.zip and flash from TWRP.
Q Permission problem in MicroG?
A visit https://shadow53.com/android/no-gapps/faq/playstore-incorrect-signature/
Downloads:
ROM - 23.08.2019 build SultanHAL
LOS 17.1 only for experimentation, please do not report any bugs.
Recovery - TWRP 3.2.3 14.02.2019
Flash Instructions:
1. wipe /data /system /dalvik /cache
2. flash rom
NOTE:-
-Clean flash recommended.
-Backup important data before flashing
Special Thanks
@lineageos
@YumeMichi
@Marado
23.08.2019 build
-"with MicroG support" rom merged with "with MicroG and SultanHal" variant.
22.08.2019 build (with MicroG Support)
- "with microg" rom variant and "no microg" variants merged into "With MicroG support" rom. check FAQ for getting MicroG installed.
-kernel sources updated
-Patches updated
11.08.2019 build (with MicroG)
-August 2019 security patch added.
-device kernel sources updated
-MigroG latest version
11.08.2019 build (NoMicroG)
-August 2019 security patch added.
-device kernel sources updated
16.07.2019 build (with MicroG and SultanHAL)
-July 2019 security patch added.
-kernel source updated
07.07.2019 build (NoMicroG)
-July 2019 security patch added.
-device kernel sources updated
16.07.2019 build (withMicroG)
-July 2019 security patch added.
-device kernel sources updated
11.06.2019 build (NoMicroG)
-June 2019 security patch added.
11.06.2019 build (with MicroG)
-June 2019 security patch added.
10.06.2019 build (with MicroG and SultanHAL)
-June 2019 security patch added.
31.05.2019 build (with MicroG and SultanHAL)
-Contacts sync added (gsync)
-additional buttons added (onyxparts)
27.05.2019 build (with MicroG and SultanHAL)
-May security patch
-kernel and device source updated
27.05.2019 build (with MicroG)
-May security patch
-kernel and device source updated
13.05.2019 build (NoMicroG)
-May security patch
-kernel and device source updated
17.04.2019 build
-April security patch
-kernel and device source updated
-FM radio working
-general stability and speed improvements
01.02.2019 build
-MicroG is not pre installed in this version.
-FAQ updated
31.01.2019 build
-Signature spoofing support
-MicroG included (enhanced privacy)
-Bromite Webview included (enhanced privacy)
-F-Droid store included
-updated LOS sources
-flash instructions updated
22.01.2019 build
-camera is fixed
-updated LOS sources
21.01.2019 build
-camera should be fixed
-updated device tree source
-updated kernel source
31.12.2018 build
-updated patches source
-updated device tree source
-updated kernel source
29.12.2018 build
-Updated LOS source
22.12.2018 build
-oneplus 3 doze
-december 2018 security patch
-latest LOS upstream source r21
psychem said:
22.12.2018 build
-oneplus 3 doze
-december 2018 security patch
-latest LOS upstream source r21
Click to expand...
Click to collapse
sounds great.. will try and revert!!
camera issues as in , it doesn't work at all?
Thanks for this new other pie rom... Comparing to the yumamichi ROM what s the difference ? However Camera is working not on yours?
Good for you psychem, looking forward to trying it out. Thanks for the build.
gipsy.danger said:
sounds great.. will try and revert!!
camera issues as in , it doesn't work at all?
Click to expand...
Click to collapse
Mchasard said:
Thanks for this new other pie rom... Comparing to the yumamichi ROM what s the difference ? However Camera is working not on yours?
Click to expand...
Click to collapse
it gets stuck in front selfie mode or force closes. it is an upstream issue most likely. getting it on builds done recently.
psychem said:
it gets stuck in front selfie mode or force closes. it is an upstream issue most likely. getting it on builds done recently.
Click to expand...
Click to collapse
just tried and yeah its stuck in front selfie.
i also noticed the hardware buttons swap settings is also missing somehow.
yume's version has an additional settings for that including alert slider.
gipsy.danger said:
just tried and yeah its stuck in front selfie.
i also noticed the hardware buttons swap settings is also missing somehow.
yume's version has an additional settings for that including alert slider.
Click to expand...
Click to collapse
yeah yume is shifting camera to vendor partition, it is in process so broken upstream, will try to reverse these commits in the next build if i build it before it is fixed upstream.
psychem said:
yeah yume is shifting camera to vendor partition, it is in process so broken upstream, will try to reverse these commits in the next build if i build it before it is fixed upstream.
Click to expand...
Click to collapse
That would be great, is there anything that can be done with selinux "enforcing"? & also in RR the Google Play Store displays device as certified, can that be sorted as well? ... additional buttons "swap buttons" missing too
Hello,I'd tried your rom and it's smooth and fast.
But there is not just camera dont work well.
In the posture (in setting/system) ,the thrid setting opnion once opened,when you try to open it second time it would crash.
And traffic speed doesn't work``````````
new build is up, untested. test and report.
Thanks for this update camera is working in this build please?
thanks for support!
Camera don't work on bulid 29-12-2018
carminepola said:
thanks for support!
Camera don't work on bulid 29-12-2018
Click to expand...
Click to collapse
Otherwise all ils working?
carminepola said:
thanks for support!
Camera don't work on bulid 29-12-2018
Click to expand...
Click to collapse
Can you erase app data, open it and change recording location so it doesn't try to use SD card?
Kéno40 said:
Can you erase app data, open it and change recording location so it doesn't try to use SD card?
Click to expand...
Click to collapse
it doesn't start at all. i have tried all possible ways. non of the 2 cameras even open. so i m back to yume's last build. that's the only one with working camera. i only wish we get sultan's 4k mod to somehow.
gipsy.danger said:
it doesn't start at all. i have tried all possible ways. non of the 2 cameras even open. so i m back to yume's last build. that's the only one with working camera. i only wish we get sultan's 4k mod to somehow.
Click to expand...
Click to collapse
https://github.com/YumeMichi/device_oneplus_onyx/commit/626c94486705d1873bd112a472a3226e0c1a9d8b
onyx: Restore OSS camera HAL
* The rear camera doesn't work at all
* and I don't what the hell is going on with LineageOS 16.0.
Change-Id: I83ff1a77ce6b9404a656ff924f64596618d71f35
Signed-off-by: YumeMichi <[email protected]>
Click to expand...
Click to collapse
will have to wait for yume to fix camera upstream.
psychem said:
https://github.com/YumeMichi/device_oneplus_onyx/commit/626c94486705d1873bd112a472a3226e0c1a9d8b
will have to wait for yume to fix camera upstream.
Click to expand...
Click to collapse
yeah lets see if we get a better build before the project is scraped!!
gipsy.danger said:
yeah lets see if we get a better build before the project is scraped!!
Click to expand...
Click to collapse
Will not be scrapped. Devs are more committed than you think.
psychem said:
Will not be scrapped. Devs are more committed than you think.
Click to expand...
Click to collapse
thats good to hear, seems like my opx still has some good days to see....
Related
This is not my Rom - this is just a Forum for discussion on XDA - the main forum is the 4pda.ru site
LineageOS 15.1 eXtended
4pda.ru - Original Rom Thread - https://4pda.ru/forum/index.php?showtopic=809215&view=findpost&p=72074026
Rom download
Source Forge - 1/4/2019 - last build
https://sourceforge.net/projects/lineageos-extended/
Latest Personal Build from Alexey71
https://drive.google.com/drive/mobile/folders/1EQCRrAVSPkzGQk1pVjDe67KaY12caGJ4
Change Log -
Find the current change log in the folder where you download the rom
Code:
/*
* I'm not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed (like it did for me...).
* Please do some research if you have any concerns about features included in the products you find here before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
* Your warranty will be void if you tamper with any part of your device / software.
* Same statement for XDA.
*/
LineageOS eXtended is a free, community built, aftermarket firmware distribution of Android 8 (oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS eXtended is based on LineageOS and the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS eXtended does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS eXtended is available in the LineageOS eXtended Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Source Code:
https://github.com/LineageOS-eXtended
https://github.com/Alexey71
What's working :
Boots
RIL (Calls, SMS, Data)
Fingerprint
IR Blaster
Wi-Fi
Bluetooth
Camera
Camcorder (Supports up to 60fps via GCAM in bright light)
Video Playback
Audio
Sensors
Flash
LED
GPS
Volte
ViLte
Known issues:
You Tell me
FAQ: (Google Translation of Russian Forum FAQ)
Answers to questions or FAQ:
* The first time the firmware is installed, crashes the setting.
Delete the SetupWizard in GAPPS
* There is no "for program" option on LOS in the superuser settings, there is only "ADB". How do I enable root for programs?
Route of access is not present, it is necessary to flash Magisk treble or LineageOS extension https://download.lineageos.org/extras
Instructions :
Download the latest Rom build - Source Forge - https://sourceforge.net/projects/lineageos-extended/ - and GApps - https://opengapps.org/
Reboot to recovery
Flash the latest build and GApps
Reboot
Downloads :
Recovery & Magisk
Twrp 3.2.3.1 - treble version -
https://dl.twrp.me/mido/twrp-3.2.3-1-mido.img.html
Orange Fox r9.0 (twrp 3.2.3.1) -
https://forum.xda-developers.com/re.../recovery-orangefox-recovery-project-t3775933
Official https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445 Magisk 19.0
Extra Camera's
MIUI Camera (For Slow Motion Video Capture)
Google Camera Builds
5.1 - made for. Redmi note 4x
https://androidfilehost.com/?fid=1322778262904015883 by k3lt
5.2 —Gcam by bulkin043
https://www.dropbox.com/s/w4x3ozscox5lidq/GoogleCamera.apk?dl=0
6.2 - Gcam by Bulkin043 (has night sight, time-lapse)
https://mega.nz/#!vPQFxYia!wh8AmGhr...n2VQJnw7VKVovduklp_ZkRH1ktJ/view?usp=drivesdk
Check out - https://www.celsoazevedo.com/files/android/google-camera/ for more Gcam builds
Credits :
Alexey711 - Rom Compiler / Developer
Alexey711 - Profile on 4pda.ru
Xda Id: Alexey71
Contributors
alexey71
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.x
ROM Firmware Required: Miui 9 8.5.x or later
Based On: LineageOS
Version Information
Status: Stable
Current Stable Version: Development Stopped
Stable Release Date: 2019-04-26
Created 2018-05-22
Last Updated 2019-04-27
We need a space to admiring this perfect ROM, thanks OP for opening the discussion thread ^_^
Magisk Module - to change some defaults - values listed below. Just allows me to turn off Noise Cancellation for Video recording, use fluencepro instead of regular fluence Noise Cancellation and enable EIS by default.
Verified that the getprop command from a ADB shell returns the new values. Looks like the Module is working
Build.prop additions
Code:
Code:
# Add EIS and disable noise cancelation
persist.camera.eis.enable=1
#use fluencepro instead of fluence
ro.vendor.audio.sdk.fluencetype=fluencepro
#turn off noise cancellation for audio recordings
persist.vendor.audio.fluence.voicerec=false
Google Translate of Russian Change Log - (old) https://pastebin.com/raw/zEH3kdjK
Current Log -
https://drive.google.com/drive/mobile/folders/1ylzMJ3VVcFTsbx7iY8NU6l1z2zQ22bpu
Great great rom. Although had a problem with the high temp/signal los bug. Flashed the module from other thread and hope its fixed now. Keep u posted.
Jaco90 said:
Great great rom. Although had a problem with the high temp/signal los bug. Flashed the module from other thread and hope its fixed now. Keep u posted.
Click to expand...
Click to collapse
Which module / recovery zip file has this patch? I haven't seen the bug yet, but i haven't tried heavy gaming on the device, mainly just casual short games
p3dboard said:
Which module / recovery zip file has this patch? I haven't seen the bug yet, but i haven't tried heavy gaming on the device, mainly just casual short games
Click to expand...
Click to collapse
Its in this thread: https://forum.xda-developers.com/showthread.php?p=76334866#post76334866
Backups - Btw, if anyone wants to get SMS Backup, Call History Backup etc, going on Oreo, and you have Root Access (Magisk Root as an example), then you can get it going by opening up a Terminal Window (get Terminal App from Google play).
Then from the terminal run
Code:
su
bmgr run
bmgr backupnow --all
Once its completed, do a reboot, and you'll notice that in your Backup Status, your SMS's, Call Logs, Device Settings etc are now backed up. They should now backup once every 2 Days to your Google Drive, for use if you need to restore your device.
Last time I tried an Oreo Rom, it wasn't backing up, and at that time, I didn't know how to fix it. So I went back to MIUI for a while, so I had the auto backup (yeah I could have used an application for SMS backup, but I wanted the OS to do it )
Jaco90 said:
Its in this thread: https://forum.xda-developers.com/showthread.php?p=76334866#post76334866
Click to expand...
Click to collapse
I just checked out the zip, the file sizes look identical to the ones already in Alexey711's rom. If you look at the change log, he already mentions adding thermal fixes
p3dboard said:
I just checked out the zip, the file sizes look identical to the ones already in Alexey711's rom. If you look at the change log, he already mentions adding thermal fixes
Click to expand...
Click to collapse
Yup, I noticed. Had the same heating bug again today. When driving in the car, the phone gets heated and i loose all signal.
i tried this ROM but cannot find the option to disable quick-setting in secure lockscreen and faceunlock option is absent in smart lock despite using nano gapps.
Skynet:) said:
i tried this ROM but cannot find the option to disable quick-setting in secure lockscreen and faceunlock option is absent in smart lock despite using nano gapps.
Click to expand...
Click to collapse
According to this post, someone fixed the face unlock issue by flashing gapps a second time.
https://www.google.com.au/amp/s/amp.reddit.com/r/LineageOS/comments/5q1awf/no_face_unlock/
I also don't have the option, i will give it a test and let you know.
As for the quick settings, don't know. Is that normally available in LineageOS 15.1? As this is just LineageOS with some extras.
Edit:
Reflashing Gapps enabled face unlock in secure unlock, so for some reason it's not registered properly the first time. So that fix works for me. I am using Micro Gapps package
p3dboard said:
According to this post, someone fixed the face unlock issue by flashing gapps a second time.
https://www.google.com.au/amp/s/amp.reddit.com/r/LineageOS/comments/5q1awf/no_face_unlock/
I also don't have the option, i will give it a test and let you know.
As for the quick settings, don't know. Is that normally available in LineageOS 15.1? As this is just LineageOS with some extras.
Edit:
Reflashing Gapps enabled face unlock in secure unlock, so for some reason it's not registered properly the first time. So that fix works for me. I am using Micro Gapps package
Click to expand...
Click to collapse
Yes reflashing brought back the face unlock but the other option seems to be not there .
p3dboard said:
According to this post, someone fixed the face unlock issue by flashing gapps a second time.
https://www.google.com.au/amp/s/amp.reddit.com/r/LineageOS/comments/5q1awf/no_face_unlock/
I also don't have the option, i will give it a test and let you know.
As for the quick settings, don't know. Is that normally available in LineageOS 15.1? As this is just LineageOS with some extras.
Edit:
Reflashing Gapps enabled face unlock in secure unlock, so for some reason it's not registered properly the first time. So that fix works for me. I am using Micro Gapps package
Click to expand...
Click to collapse
I reflashed gapps but no face unlock working. It doesn't unlock the phone. There is some hidden option?
djgigi94 said:
I reflashed gapps but no face unlock working. It doesn't unlock the phone. There is some hidden option?
Click to expand...
Click to collapse
Yes, after you add your face, you need to go into the screen lock settings and enable the Face Auto unlock feature
hi,
in previous thread I said that autonomy was good, but ultimately it is worse than miui or others 8.1 rom...
May 2018 Security patch build is out
Do we need to flash gapps everytime even on dirty updates?
cimdrap said:
Do we need to flash gapps everytime even on dirty updates?
Click to expand...
Click to collapse
Nope,only flash if you did wipe before updates
If you want to get more Miui level battery performance, you can turn on extreme power savings under battery which restricts background processes and performance.
Miui applies a heavy restriction on background processes
GENOM KERNEL REWORKS
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Support for MIUI OREO rom
Works in both AOSP/LineageOS(Oreo & Pie) treble based ROMs
Always up-to-date with
Linux Upstream | Latest CAF Tag | Latest Prima Tag
Features:
Pie CAF & Prima Tag : LA.UM.7.6.r1-3900-89xx.0 (kernel.lnx.3.18.r34-rel & wlan-driver.lnx.1.0.r30-rel)
Oreo CAF & Prima Tag : LA.UM.6.6.r1-10500-89xx.0 (kernel.lnx.3.18.r33-rel & wlan-driver.lnx.1.0.r23-rel)
Linux Upstream 3.18.131
KCAL color control
EAS Governor : Schedutil, Electroutil, Darkutil, Pwrutilx (MIUI Only)
Sound control
Vibration intensity control
exFAT Support
Boeffla wakelocker
Wireguard VPN Support
TCP congestion algorithm : cubic, reno, westwood
CPU Hotplug
Download :
Github Release
Installations :
Backup boot.img if you want to go back
Backup /system/lib/modules folder for MIUI
Flash Zip file with any twrp recovery
reboot and forget
Enjoy
TELEGRAM NIGHTLY BUILD :
Genom Kernel CI
XDA:DevDB Information
Genom Kernel for vince, Kernel for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
rama982, mdeejay, blacksuan19, raphielscape, LuizPauloDamaceno
Source Code: [url]https://github.com/GenomProject-redmi5plus/android_kernel_xiaomi_vince-caf[/URL]
Kernel Special Features:
Version Information
Status: Stable
Stable Release Date: 2018-11-11
Created 2018-09-10
Last Updated 2019-01-05
Reworked thing, so not much features on it yet. And only MIUI for now
All changelog from before reworks is deleted.
Changelogs -:
MIUI / 2019-01-05
» kernel & wlan: Merge CAF tag 'LA.UM.6.6.r1-10500-89xx.0'
» Changed dts to decompiled dtb from latest miui 9.1.1 china beta
AOSP, MIUI / 2018-12-22
» Release AOSP kernel too
» New base from leaked oreo kernel source
» Merged linux 3.18.131
» Merged google aosp branch (Only AOSP kernel)
» Revert OC on MIUI kernel
MIUI / 2018-11-13
» Fully reworking dts changes for vince
» Re-adding Novatek ts(panel still broke) and Ebbg ts synaptics on dtsi
» Re-adding Fingerprint Boost
» Re-adding AutoSMP Hotplug + MSM Hotplug
» Re-adding Wireguard
MIUI / 2018-11-11
» Reworked and rebased to latest CAF tag LA.UM.6.6.r1-10100-89xx.0 for oreo
» Merged latest kernel stable 3.18.125
» No more bootloop / kernel panic issue
Nice, have been waiting for this xd
Does This means we will start seeing Pie ROMS ?
Mordar said:
Does This means we will start seeing Pie ROMS ?
Click to expand...
Click to collapse
Well, some dev saying pie rom for vince will booting in one week.
Ah so you're the one that ported AOSP-Pie to vince,kudos to you for doing that.
rama982 said:
Well, some dev saying pie rom for vince will booting in one week.
Click to expand...
Click to collapse
@rama982 your rom Mcaosp PIE is damn great with all extra features looking forward for official release on xda, will try this kernel
yes your port of mcaosp pie with this kernel already makes me so happy this month. Stable kernel you hav here..
ekowanz said:
yes your port of mcaosp pie with this kernel already makes me so happy this month. Stable kernel you hav here..
Click to expand...
Click to collapse
ibbi.ir7 said:
@rama982 your rom Mcaosp PIE is damn great with all extra features looking forward for official release on xda, will try this kernel
Click to expand...
Click to collapse
Ugh... Sorry to disturb, which mcaosp ROM are you guys talking about? Searched xda but no clue.
AndroBuddy007 said:
Ugh... Sorry to disturb, which mcaosp ROM are you guys talking about? Searched xda but no clue.
Click to expand...
Click to collapse
Its not available on xda by the way links are below
Mc-Aosp Pie build 2018.09.04 vince update
~Ported by @rama982
Changelog from 2019.08.29 build:
- Update builtin kernel to Genom Pie 2018.09.09
ROM
(Translated from russian with google)
-Number of switches in the shutter
-Ability to hide the navigation bar
-Added the ability to edit buttons
-Tiles of the screenshot (by area) and hide the navigation bar
-Expanding ring volume
-Ability to remove a warning at the bottom of the Quick Settings toolbar
-Ability to change the grid of the quick settings panel
- Weather on the lock screen
- Some changes that not included on changelogs
ATTENTION
- VOLTE still not fix
ROM: http://bit.ly/mcaosp-vince-port-20180904
PATCH: http://bit.ly/patch-v2-uni (must install)
GAPPS: https://opengapps.org/
MAGISK: http://bit.ly/magisk-pie
ibbi.ir7 said:
Its not available on xda by the way links are below
Mc-Aosp Pie build 2018.09.04 vince update
~Ported by @rama982
Changelog from 2019.08.29 build:
- Update builtin kernel to Genom Pie 2018.09.09
ROM
(Translated from russian with google)
-Number of switches in the shutter
-Ability to hide the navigation bar
-Added the ability to edit buttons
-Tiles of the screenshot (by area) and hide the navigation bar
-Expanding ring volume
-Ability to remove a warning at the bottom of the Quick Settings toolbar
-Ability to change the grid of the quick settings panel
- Weather on the lock screen
- Some changes that not included on changelogs
ATTENTION
- VOLTE still not fix
ROM: http://bit.ly/mcaosp-vince-port-20180904
PATCH: http://bit.ly/patch-v2-uni (must install)
GAPPS: https://opengapps.org/
MAGISK: http://bit.ly/magisk-pie
Click to expand...
Click to collapse
Thanks for informing!
Shall I forward this message to others, make it available for users on xda or do I keep it as it is?
Deleted~
AndroBuddy007 said:
Thanks for informing!
Shall I forward this message to others, make it available for users on xda or do I keep it as it is?
Click to expand...
Click to collapse
Thats not my rom its owned by rama as one of my friend shared with me and u was aking for it so i shared here as well you can ask rama is he didn't mind that.
ibbi.ir7 said:
Thats not my rom its owned by rama as one of my friend shared with me and u was aking for it so i shared here as well you can ask rama is he didn't mind that.
Click to expand...
Click to collapse
Ok:good:
AndroBuddy007 said:
Thanks for informing!
Shall I forward this message to others, make it available for users on xda or do I keep it as it is?
Click to expand...
Click to collapse
i think the reason why OP doesnt make the thread bout the rom here cause he thinks the rom still on alpha phase (beta i supposed.. dunno) so its only on telegram channel. but for me the rom itself quite stable for daily driver.
ekowanz said:
i think the reason why OP doesnt make the thread bout the rom here cause he thinks the rom still on alpha phase (beta i supposed.. dunno) so its only on telegram channel. but for me the rom itself quite stable for daily driver.
Click to expand...
Click to collapse
If so, pm me the telegram group link.
AndroBuddy007 said:
If so, pm me the telegram group link.
Click to expand...
Click to collapse
this is the teklegram grousp https://t.me/redmi5plusofficial
Hey rama982 I have a requst can u make a kernel integrated with all hid & WiFi adapter drivers. As I want to run kali nethuter in Redmi note 5/5plus(vince) but currently no dev has compile a nethunter supported kernel for vince.. If you want I can test your build.. Plz made one
Lag on playing game (ML, Pubg)
Sent from my [device_name] using XDA-Developers Legacy app
Tried it on havoc Oreo and works well for me, good performance.
But I had a problem that kodi app freezes. Back to DA and kodi works well again.
LineageOS is a free, community built, aftermarket firmware distribution of Android 9 (Pie), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
What's Working:
• Boots
• RIL (network, data, volte ._.)
• Camera
• Wifi, BT
• Fingerprint
• many other stuffs (can't list all)
Known Issues:
• u tell me (with proper logs)
Credits Section:
• hail Teamlion
• @muralivijay for his great work on rosy
• @haran for fixing major bugs (Cam, Fingerpint, etc)
• thanks to all testers... who tested stuffs & co-operated (shreejoy, praveen, shivam, consrb, and other guys)
• @Sukrut for server stuff.. & pruh deb ;_;
• thanks to all guys... who ever helped in rosy development
• little bit for me
Source code:
https://github.com/aragon12/android_kernel_xiaomi_msm8953
XDA:DevDB Information
lineageos 16 for rosy, ROM for the Xiaomi Redmi 5
Contributors
aragon12, muralivijay
Source Code: github.com/lineageOS
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.x
ROM Firmware Required: latest miui OREO firmware
Version Information
Status: Stable
Stable Release Date: 2019-01-01
Created 2019-01-02
Last Updated 2019-01-02
Note: it's required to flash latest OREO FIRMWARE... otherwise Fingerprint won't work
Downloads:
https://sourceforge.net/projects/aragon12/files/rosy/los
Changelog:
15/04/2019
~ April security patches
~ most blobs updated to pie
~ ramdisk update
~ or whatever i missed b/w 2 months
09/02/2019
~ February security patches
~ improved network reception
~ fixed aggressive killing of apps
~ fixed live display
~ Cast screen fixed
~ update some blobs to pie (display, etc)
~ other stuffs.. which I missed
17/01/2019
~ January security patches
~ fixed In-Call volume unadjusable (no need patch now)
~ fixed "Internal problem" warning on reboot
~ Update Bluetooth stuffs from pie
~ Update Vulkan from pie
~ Update brightness overlays
~ other things.. which i missed
01/01/2019
~ Initial release
DOWNLOAD:
https://sourceforge.net/projects/aragon12/files/rosy/los/
reserved
Prooooooo .......
Tanks boi;_;:fingers-crossed:
??
Thanks but I have a problem I cant use fingerprint.
Where I Can find lasted Oreo firmware ?
Everything works fine, thank you so much. Only bug i've noticed is that when I turn on the phone it says "There's an internal problem with your device...". Any ideas how to get rid of it? If I find anything more I'll report
Switchonthelight said:
Thanks but I have a problem I cant use fingerprint.
Where I Can find lasted Oreo firmware ?
Click to expand...
Click to collapse
flash latest firmware
Does this have edge gestures like bootleggers rom?
sekhar0199 said:
flash latest firmware
Click to expand...
Click to collapse
Like [Firmware] Xiaomi Redmi 5 [ROSY] [Auto updated weekly!]?
I installed the MIUI10 firmware but the fingerprint is still not working. The phone has fingerprint setting but it doesn't work when I tried to add a fingerprint.
aragon12 said:
Known Issues:
• Incall volume unadjustable
Click to expand...
Click to collapse
Will be fixed in next build as well?
aragon12 said:
Known Issues:
• Incall volume unadjustable
Click to expand...
Click to collapse
Incall volume works when fixes from this thread flashed https://forum.xda-developers.com/redmi-5/development/rom-pixel-experience-t3885480
chfree-kz said:
Incall volume works when fixes from this thread flashed https://forum.xda-developers.com/redmi-5/development/rom-pixel-experience-t3885480
Click to expand...
Click to collapse
Great!!!!
Thanks to @aragon12 @Sukrut4778 they both worked hard to fix it ...
I'm still not sure whether I should go for LOS15 or LOS16. Will there be regular updates for this version?
how to fix the unbalance audio in headphone ?
Tungg said:
how to fix the unbalance audio in headphone ?
Click to expand...
Click to collapse
As far as I know, one have to flash thunderstorm kernel to get balanced audio in headphones.
New UPDATE is up | 17/01/19 :good:
CHANGELOG:
~ January security patches
~ fixed In-Call volume unadjusable (no need patch now)
~ fixed "Internal problem" warning on reboot
~ Update Bluetooth stuffs from pie
~ Update Vulkan from pie
~ Update brightness overlays
~ other things.. which i missed
DOWNLOAD:
https://sourceforge.net/projects/aragon12/files/rosy/los/
Hi, are you still the official RR os maintainer for Rosy?
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
INSTRUCTIONS
Download latest ROM, Gapps, Magisk
Reboot to Recovery
Wipe system, data, cache and dalvik
Install all
Reboot
Downloads
ROM: https://www.androidfilehost.com/?w=files&flid=306905
Gapps: https://opengapps.org/
TWRP: https://drive.google.com/file/d/1-BZiHJt2uWhVJ8rut72fbSZPDz175DMK/view?usp=drivesdk
NOTE:
Clean Flash is recommended, i.e.. Wipe data,cache,dalvik cache, system
If you dont wipe system, backuptool will reapply your modifications that support addon.d like GApps etc..
Recommended to use Pico Gapps
Device Sources: https://github.com/xiaomi-classic-dev
XDA:DevDB Information
LineageOS 17.1, ROM for the Xiaomi Mi 3
Contributors
vikash1994b, Special Thanks to Xiaomi-classic-dev Team for the sources
Source Code: https://github.com/LineageOS
ROM OS Version: Android 10
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Testing
Created 2020-03-29
Last Updated 2020-04-16
16.04.2020
⚛ Fixed Reboot tile, properly shows reboot to recovery
⚛ Fixed device auto wake up when lockscreen set to none.
⚛ Few kernel improvements and optimisation taken from common msm8974 devices.
⚛ LineageOS latest changes.
12.04.2020
⚛ April Security Patch
⚛ Added Pixel UI, i.e.. framework colors (check settings in dark mode)
⚛ Added Reboot/Recovery/Power off tile. Tap to change mode and long press to activate.
⚛ Improved DT2W implementation
⚛ Fixed Capacitive Keys not disabling when on screen navigation bar is enabled.
⚛Lineage Latest changes
04.04.2020
⚛ Disabled Trust warning notification for selinux and sign.
⚛ lineageOS Upstream changes.
03.04.2020
⚛ Open Gapps Compatibility: Increased Free space in System partition, now we have almost 280MB of free space,so now open gapps can be easily flashed.
⚛ Patched SafetyNet , Now SafetyNet Check passes even without Magisk.
⚛ Added Double Tap to Wake
⚛ Added Three Finger Swipe for Screenshot. Credits to MokeeRom
⚛ Implemented OTA Update, so from now on you can get updates directly via Lineage OS updater.
⚛ Device Tree Cleanup
⚛ Lineage OS upstream changes
30.03.2020
⚛ Updated Fingerprint to fix vendor missmatch
⚛ Bring in some optimsation from Android GO
⚛ Added SystemUI to PRODUCT_DEXPREOPT_SPEED_APPS
⚛ Disable SF Latch Buffer Signaled property
⚛ Enabled GL comp backpressure
⚛ Disabeld SF backpressure
29.03.2020
⚛ Initial Release
Which gapps are recommended?
[email protected] said:
Which gapps are recommended?
Click to expand...
Click to collapse
The one i use is this https://drive.google.com/file/d/1-4_3zTu56gnay4zUV_8NZgKJOXnQhh8Q/view?usp=drivesdk and it works fine.
Here are some screenshots of this rom.
vikash1994b said:
The one i use is this https://drive.google.com/file/d/1-4_3zTu56gnay4zUV_8NZgKJOXnQhh8Q/view?usp=drivesdk and it works fine.
Click to expand...
Click to collapse
And which twrp , multi rom or normal twrp
[email protected] said:
And which twrp , multi rom or normal twrp
Click to expand...
Click to collapse
Normal TWRP!
[email protected] said:
And which twrp , multi rom or normal twrp
Click to expand...
Click to collapse
File can't be downloaded , unsupported.
[email protected] said:
File can't be downloaded , unsupported.
Click to expand...
Click to collapse
As I know, twrp 3310 had some problem, so i still v3210 (3230 should be ok too) and it works fine!
You may download it from TWRP website directly, if v3230 has problem, just let me know, I can upload v3210 to g-driver later!
r30857 said:
As I know, twrp 3310 had some problem, so i still v3210 (3230 should be ok too) and it works fine!
You may download it from TWRP website directly, if v3230 has problem, just let me know, I can upload v3210 to g-driver later!
Click to expand...
Click to collapse
No problem in downloading twrp, can't download gapps.
[email protected] said:
No problem in downloading twrp, can't download gapps.
Click to expand...
Click to collapse
Ok, I will upload the BiTGapps after 10 minutes
(Opengapps doesn't work due to space issue, no matter Pico or Nano )
Edit:
Here you go!
https://drive.google.com/file/d/1-ctmk8kWrclKJ6akg-UJg_NcsSwB_z9o/view?usp=drivesdk
Very good effort...
New Lineage OS Builds is up (30-03-2020)
Download https://androidfilehost.com/?fid=4349826312261757707
Changelogs
Updated Fingerprint to fix vendor missmatch
Bring in some optimsation from Android GO
Added SystemUI to PRODUCT_DEXPREOPT_SPEED_APPS
Disable SF Latch Buffer Signaled property
Enabled GL comp backpressure
Disabeld SF backpressure
Hi, are you thinking about future releases (something like one every month or so) with bug correction and, maybe, improvements?
Can you suggest a specific kernel/camera/video driver for this builds, or the included ones are good?
Thanks.
keru32 said:
Hi, are you thinking about future releases (something like one every month or so) with bug correction and, maybe, improvements?
Can you suggest a specific kernel/camera/video driver for this builds, or the included ones are good?
Thanks.
Click to expand...
Click to collapse
I will most probably be providing monthly security updates. I dont think there are custom kernel available for cancro. So you're left with the the included one. Give it a try rom is stable enough with no major bug or FC.
vikash1994b said:
I will most probably be providing monthly security updates. I dont think there are custom kernel available for cancro. So you're left with the the included ones. Give it a try rom is stable enough with no major bug or FC.
Click to expand...
Click to collapse
Totally agree!
To this old device and with this stable ROM, monthly security updates should be enough!
I install this ROM for 2 days, no FC and no major bug (although i cannot pass the safetynet, but it is ok) very smooth with good battery performance! And the temperature also outstanding when play a game!
Thanks for the great ROM!:good:
r30857 said:
Totally agree!
To this old device and with this stable ROM, monthly security updates should be enough!
I install this ROM for 2 days, no FC and no major bug (although i cannot pass the safetynet, but it is ok) very smooth with good battery performance! And the temperature also outstanding when play a game!
Thanks for the great ROM!:good:
Click to expand...
Click to collapse
There is a workaround to pass safetynet on latest build. You need to install magisk and enabling magisk hide.
vikash1994b said:
I will most probably be providing monthly security updates. rom is stable enough.
Click to expand...
Click to collapse
Excellent, what else is required for a legendary device.
Unbelievable that this solid device will get a stable build of lineage os 17.1 - mother of all custom roms even after so many years. Thank you very much.
vikash1994b said:
There is a workaround to pass safetynet on latest build. You need to install magisk and enabling magisk hide.
Click to expand...
Click to collapse
Thanks for the information, i tried it but no lucky, its okay, to me, not an issue!
But could you check the Bluetooth is functional our not?
Tried to using BT but seems not working?
Thanks in advance!
Installed the rom. It's very smooth and stable. Battery is also doing fine. Didn't put a sim and check it. Installed magisk 20.3 and updated to 20.4.
Gapps by the op is working, opengapps could not be installed.
My son played some games with it and was satisfied with its performance.
Haven't checked BT.
Installed YouTube vanced black edition from magisk download.
Will try to install magisk modules for safetynet bypass.
The speaker of my phone is faulty so can't comment about sound.
The rom is an excellent build and the device has surpassed itself.
I wanted to install a gcam port for it. I tried several builds but none of them could even be installed. (i know I'm off topic here). I'll delete this line if the op takes an exception. So if anyone is aware of any working gcam build/port kindly tell me. The device has an excellent sensor for camera.
Also an option to use power menu on the hardware button long press / double tap would have been very useful. I'm presently using a 3rd party app from play store for power off /reboot /reboot to recovery etc as the power button is on the way to its grave due to old age. Otherwise the device is in excellent condition.
Double tap to wake is a very desirable feature due to power button eol and volume button wake is there but these also might get finished due to regular use.
Am using greenify and gravity based wake up to save the power button.
RevengeOS is back and happy to announce that our new UI implementation is ready to be shipped to all of our users. A quick look at our designed UI is here
RevengeOS is an aftermarket firmware based on AOSP. We are dedicated to a beautiful, fast, stable and minimal customized ROM, honesty and communication with our users, and openness with our code, Hope you will enjoy.
Please feel free to look, build, and use our code at RevengeOS GitHub.
Also, we got our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us
Disclaimer: While we make every effort to test these builds as much as possible, we are not responsible for anything that may happen to your device, family, pets, or perception of reality. We ask that you do your part to know your device and know how to recover from problems before you flash! If you have questions, ask your fellow users or ask us in Telegram Group
Download ROM here for your device! [Newer link on third post of this thread!!!!!!!]
Vince
What's Working
- Wi-Fi
- RIL
- VoLTE
- Mobile data
- GPS
- Camera
- Flashlight
- Camcorder
- Bluetooth
- Fingerprint
- Sound / vibration
BUGS:
- You Tell me
Download the ROM
- Backup each and every partition from TWRP Recovery(optional)
- Make a full wipe (system, vendor, data, cache, dalvik)
- Flash RevengeOS Package
- Flash gapps
- Wipe cache! -And at last Reboot!
[First boot will take few minutes! Have patience]
Clean Flash is always recommended!
If you want any bug to be fixed please write here on xda in detail. Give Logcats, mention your device name, mention if any mods and kernels, if used and please be specific about it. By helping us, you are helping yourself too.
->How to take Logcats?
https://goo.gl/UcTM9 and https://goo.gl/J4CSEP
Like my Work?
Buy me a Beer or Coffee
Donate
Device Source
- Kernel Tree
- Device Tree
- Vendor Tree
XDA:DevDB Information
RevengeOS, ROM for the Xiaomi Redmi Note 5 / 5 Plus
Contributors
Starlight5234
Source Code: https://github.com/RevengeOS
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Global Firmware
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2020-10-28
Created 2020-10-28
Last Updated 2020-11-19
Important announcement for developers, please click here https://telegra.ph/We-need-developers-11-19
[ Latest ]
RevengeOS Version: 4.0
Build date: Thu May 13 14:26:06 UTC 2021
Device changelog:
- Cleanup deprecated stuff
- Switch to Health HAL 2.1
- Add camera libs needed for IMS
- Switch to AOSP Clang 11
Kernel changelogs:
- Starlight kernel r2
- Rebase to Kud-Project
- Upstream to 4.9.267
- Upstream base, prima and techpack to LA.UM.9.6.2.r1-04200-89xx.0
- Misc fixes from Kud-Project
- Fix the "delay" when waking device using fp
- Include and upstream LZ4 compression
- Debloat prima drivers (creds to @mochi_wwww)
Source changelog:
- May security patch
Download link: RevengeOS-4.0-R-OFFICIAL-vince-20210513-1423.zip
MD5: (ccfd20c36e7c0cbfa5882b6f9e755a5f)
Donate: https://paypal.me/lucchetto
[ Older ]
RevengeOS Version: 4.0
Build date: Fri Apr 16 18:29:48 UTC 2021
Device changelog:
- Update Audio, BT, Radio and almost all other blobs from LA.UM.9.6.2.r1-03600-89xx.0
- Fix FM Crash
- Import DSP, Latency and Voice blobs
- Switch to taimen fp
- Fix green artifacts
- Restore QCOM deep buffer
- Fix USSD codes not working on some operators
Source changelog:
- April security patches
- Network per-app isolation
vince
Download link: RevengeOS-4.0-R-OFFICIAL-vince-20210416-1624.zip
MD5: (3ad782caebfec04ba282dac20e60778e)
Donate: https://paypal.me/lucchetto
[ Older ]
RevengeOS Version: 4.0
Build date: Thursday 05/03/2021 12:39 UTC
Changelog:
- March Security Patch
- Fixed DT2W not turning off & IR
- Address tons of denials
- Switch to AIDL PowerHAL
- Switch to goodix fp HAL from Daisy
- Full VNDK support ( Thanks to @SebaUbuntu)
- Add some missing camera blobs from Hydrogen
NOTE :
- Clean flash recommended
- SeLinux is Enforcing
- CTS passes as usual
Download link: RevengeOS-4.0-R-OFFICIAL-vince-20210305-1239.zip
Donate: https://paypal.me/lucchetto
------------------------------------------------------------------------------------------
New RevengeOS update available!
RevengeOS Version: 4.0
Build date: Wed Feb 17 18:52 UTC 2021
Device changelog:
- Disable mobile data on first boot
- Add & tune zram (50% of RAM)
- Attempt to fix fp usage in other apps
- Update to February redfin fp
- CTS passes by default
- "Mostly" fix chrome crash
Source changelog:
- February security patch
- Recents UI improvements
- Network traffic indicator
- Gesture pill width customisation
- Burn in protection
- Include Etar (Calendar app) and Simple Gallery Pro
- Include Simple Weather app
- Added Advanced reboot
Download link: RevengeOS-4.0-R-OFFICIAL-vince-20210217-1852.zip
Donate: https://paypal.me/lucchetto
Thanks man, can't wait to try this!
I am using this version now, I really liked the alpha versions more. they were more stable and the UI didn't look weird.
I am getting some weird navigation issues like the buttons not appearing again on fullscreen apps if I swipe from the edges. Also, I cannot disable gradients even tho there is an option for that in the Style app.
Downloading
Download link don't work?
Hey man, just wanted to ask, could you possibly work on HavocOS 4.0 for Vince?
The last dev(awesome guy btw) left that AMAZING rom.... Would love to see it being brought back to life.
JustAnAverageGuy_19 said:
Hey man, just wanted to ask, could you possibly work on HavocOS 4.0 for Vince?
The last dev(awesome guy btw) left that AMAZING rom.... Would love to see it being brought back to life.
Click to expand...
Click to collapse
This please. <3
JustAnAverageGuy_19 said:
Hey man, just wanted to ask, could you possibly work on HavocOS 4.0 for Vince?
The last dev(awesome guy btw) left that AMAZING rom.... Would love to see it being brought back to life.
Click to expand...
Click to collapse
There is already a new maintainer for havoc for Vince. Please be patient as havoc 4.0 isn't out for any device and the new maintainer would do everything they can to get a stable and beautiful build to you as soon as possible
Hi, I'm using your rom but I'm having some issues. First I couldn't manage to install the NikGapps because even if the installation was successfull they didn't appear on my phone. I just managed to get play services and play store, so I installed everything from there, but the problem is that every browser I try to install other than the one you provided instantly (for example chrome and edge) freezes and becomes unusable. Other than that, I tried to disable the keyboard vibration but it still vibrates when I write something. Other than that it's a great rom so keep going
Broskinator said:
Hi, I'm using your rom but I'm having some issues. First I couldn't manage to install the NikGapps because even if the installation was successfull they didn't appear on my phone. I just managed to get play services and play store, so I installed everything from there, but the problem is that every browser I try to install other than the one you provided instantly (for example chrome and edge) freezes and becomes unusable. Other than that, I tried to disable the keyboard vibration but it still vibrates when I write something. Other than that it's a great rom so keep going
Click to expand...
Click to collapse
the chrome browser crash bug already fixed on lastest build. what nikgapps u use? if you dont want keyboard vibration, u can disable the touch vibration at settings.
EriecTan said:
the chrome browser crash bug already fixed on lastest build. what nikgapps u use? if you dont want keyboard vibration, u can disable the touch vibration at settings.
Click to expand...
Click to collapse
When will the latest build be released? And how do the updates work? Do we have to flash it again from the recovery? I solved my issue with NikGapps, I just had a corrupted version due to problems during the download. The touch vibration is disabled in my options but the keyboard is the only thing that keeps vibrating
Broskinator said:
When will the latest build be released? And how do the updates work? Do we have to flash it again from the recovery? I solved my issue with NikGapps, I just had a corrupted version due to problems during the download. The touch vibration is disabled in my options but the keyboard is the only thing that keeps vibrating
Click to expand...
Click to collapse
lastest build on the 1st post date 28 - 10 - 2020. Yes, update flash thru recovery. Go to settings > accessibility > vibration & haptic strength > touch feedback off.
this will make any touch vibration off too
EriecTan said:
lastest build on the 1st post date 28 - 10 - 2020. Yes, update flash thru recovery. Go to settings > accessibility > vibration & haptic strength > touch feedback off.
this will make any touch vibration off too
Click to expand...
Click to collapse
I was obviously talking about the next release, because the one I have is already the one in the first post, and the chrome freeze is in it
Broskinator said:
I was obviously talking about the next release, because the one I have is already the one in the first post, and the chrome freeze is in it
Click to expand...
Click to collapse
I have heard people saying about it but for some reason Chrome decides to not crash on my phone no matter what I do. I tried many times reproducing the error but it "seems" it's because of SeLinux enforcing, try flashing permissiver
Starlight5234 said:
I have heard people saying about it but for some reason Chrome decides to not crash on my phone no matter what I do. I tried many times reproducing the error but it "seems" it's because of SeLinux enforcing, try flashing permissiver
Click to expand...
Click to collapse
It doesn't crash, but it freezes becoming unusable. Other thing, today I noticed that my GPS doesn't work too, with every app.
What do you mean by "try flashing permissiver"?
Broskinator said:
It doesn't crash, but it freezes becoming unusable. Other thing, today I noticed that my GPS doesn't work too, with every app.
What do you mean by "try flashing permissiver"?
Click to expand...
Click to collapse
Permissiver v5 by Erfanoabdi, anyways will look after GPS issues
Starlight5234 said:
Permissiver v5 by Erfanoabdi, anyways will look after GPS issues
Click to expand...
Click to collapse
So should I flash it from the scratch as if I was doing the first flashing?
Broskinator said:
So should I flash it from the scratch as if I was doing the first flashing?
Click to expand...
Click to collapse
you don't have to clean flash again, install it as usual will do just fine