Folks,
I have the XTRONS model PF82MTVA (8" VW model, upgraded to Android 4.4.4)
It is:
Full AOSP On MStar Cedric3
CPU Cortex-A9 dual core
Android version 4.4.4
MCU Version 4.3.10.1-1-10-610101
System version 2.9.5_20150413
DVD version 2.13.13-860mc
Decoding the MCU version gives me:
Version: 4.3.10.1
H/W revision: 1
Car model: VW
Features: RDS, Color, BC6
Tuner chip: TEF662X
Can I flash this to Android 5.1 with the Malaysk package? Which one?
Any suggestions welcome.
Thanks in advance.
Thanks
Bump
Anyone?
transparu said:
Anyone?
Click to expand...
Click to collapse
Any luck IM LOOKING FOR THE SAME? Where did you get your 4.4.4 update from, CHEERS
Folks, I have seen a couple of requests for more info re my Xtrons unit recently.
Sorry for this late reply but I am travelling in my van and at the moment have done almost 10, 000km in the past 4 weeks. Presently on the very west coast of WA.
Sorry, but I simply can't recall where I got the upgrade - though I can say it worked fine though when Xtrons folk tried to help with an unrelated issue the solution involved reinstalling the original Android version. Sorry. I will TRY to find where I got it when I'm home again.
I must tell you though that I had months of trouble with the unit leading up to the reinstalling of the original O/S. THAT did not solve the problem. In the end, when I had to put a new battery in the car and do some underbonnet work the battery was out for 2 days. When I put it back in the head unit worked fine!
In the subsequent 6 weeks there has been one "no boot" instance.
Through the months if issues, no variation of resetting changed things. Installing the original code didn't work. It was only totally powering down the unit that worked.
FWIW and for ?reference.
vwq47
Sent from my SM-G900I using Tapatalk
Hi, bought this unit a couple of months ago and it's been working great. I would like to install some custom roms but i don't know what type of mcu it has.
The model is a EONON GA7158S with the following information:
- Processor: QuadCore T3
- Android version: 6.0.1
- MCU Version: T5.3.19-108-14-943101-170608
- System Version: V8.2.1_20170616.195953_KBT6
Thanks
Well... searched a bit and found a russian forum where they have some information about my model and apparently mine is not a mtcb unit. They have some firmwares and i proceeded to install one with the android version 7. Now im stuck on the android boot logo... tried the reset button but nothing, tried installing the previous version using recovery same thing..
Any help is appreciated
speratus said:
Well... searched a bit and found a russian forum where they have some information about my model and apparently mine is not a mtcb unit. They have some firmwares and i proceeded to install one with the android version 7. Now im stuck on the android boot logo... tried the reset button but nothing, tried installing the previous version using recovery same thing..
Any help is appreciated
Click to expand...
Click to collapse
Were you able to fix the issue? Because I have the same problem smh
Hello,
i buyed a Taffio S200 Android Radio for my Opel Astra J with an Octa Core PX5 2GB Ram and 32Gb
Can anyone tell me how i come into the Recovery Mode? The Radio havn't any Buttons, only a small Reset Button. I tryed it with Terminal Emulator but it's rebooting i see a little bit like Recovery Menu but than it's rebooting again to Android.
I search a Custom Rom too, but i only read about MTCD and MTCE but my device shows MCU version: 2018-04-16 17:04:06 ZHAN_(NOR)_90_C9RD6686_CAN(A)PX5D1804160.
I couldn't find anything about this mcu.
Have anyone an idea how to root this device? I can't try a lot of things, because i can't restore a brick without Recovery Menu and stockrom.
Does your HU have a USB port? If so, plug in a USB keyboard, reboot/reset the device and try pressing Alt + Print Screen while tapping i or e (both works)
MADNESSSsss said:
Does your HU have a USB port? If so, plug in a USB keyboard, reboot/reset the device and try pressing Alt + Print Screen while tapping i or e (both works)
Click to expand...
Click to collapse
Yes, but it warmed up the device, it shows a countdown of 5 seconds but then it starts normally.
DennisBa said:
Yes, but it warmed up the device, it shows a countdown of 5 seconds but then it starts normally.
Click to expand...
Click to collapse
Have you tried enabling adb over Wifi on the device using https://hvdwolf.github.io/Joying-RootAssistant/ (or even rooting ~ some risk is there, so try the adb method first) and using an adb command to reboot to recovery?
MADNESSSsss said:
Have you tried enabling adb over Wifi on the device using (or even rooting ~ some risk is there, so try the adb method first) and using an adb command to reboot to recovery?
Click to expand...
Click to collapse
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
The Joying Root Assistant didn't work for you to root the device?
Some firmwares lock you out of the recovery menu, where it can be only used for updating your firmware. Maybe that's why?
DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
Your unit is a WINCA/ROADNAV manufactured S200 and it can be rooted. I know because I have exactly the same MCU firmware and probably the same Android build. Check out the rooting thread on the first page of this forum. In there is all the info you need.
DennisBa said:
Yes i tried this too, but the same. I have destroyed my Firmware but i dont know where i became the Stock Rom for this Device. so i flashed the Joying Android 8 Stock Rom. and it works but not the Recovery. The same Problem. I have root but only semi rooted.
Click to expand...
Click to collapse
after updating the commands on the steering wheel still work?
looxonline said:
Your unit is a WINCA/ROADNAV manufactured S200 and it can be rooted. I know because I have exactly the same MCU firmware and probably the same Android build. Check out the rooting thread on the first page of this forum. In there is all the info you need.
Click to expand...
Click to collapse
Would you backup your stock rom?
after installing the joyng android 8.0 my controls on the steering wheel have stopped. I would like to install the stock again.
eduardofluh said:
after updating the commands on the steering wheel still work?
Would you backup your stock rom?
after installing the joyng android 8.0 my controls on the steering wheel have stopped. I would like to install the stock again.
Click to expand...
Click to collapse
I could but my stock ROM will most likely not work properly on your unit. Each ROM differs slightly from car to car with the WINCA units. It's daft but it's how they chose to design.
looxonline said:
I could but my stock ROM will most likely not work properly on your unit. Each ROM differs slightly from car to car with the WINCA units. It's daft but it's how they chose to design.
Click to expand...
Click to collapse
You are my last hope. The controls on the steering wheel do not work, not even the Parking Sensor. If it goes wrong, nothing will change. Could you backup and send me? I would be very grateful.
eduardofluh said:
You are my last hope. The controls on the steering wheel do not work, not even the Parking Sensor. If it goes wrong, nothing will change. Could you backup and send me? I would be very grateful.
Click to expand...
Click to collapse
Please send me the link to where you purchased your unit as well as all you know about the manufacturer.
Mine too is ZHAN_(NOR) i bought it in Polish Reseller, original seller is bluepowercn.com, the name of the unit is GREATSO S200. Cannot find in Russian Forums and XDA any information about that ROM or UPDATES/MODS. Alie Store:
Bluepower Electronics co., ltd
youtube.com/watch?v=AEvCX2bomoA - info from Witson with same MCU, Ok Found mine it`s: W2-W279
Is it possible to upgarade or install mod rom to W2-W279? I have some issues with OBD2 connection via Bluetooth and Bluetotoh contacts storage plus minor bugs... cannot find on XDA if ZHAN_(NOR) is possible to upgrade or change of the stock rom.
DennisBa unit is W2-W072 - Opel Astra J - i think its the same brand and topic is consistent.
Olá,
Como faço atualização desde modelo MCU ZHAN_(nor)_90_C9RD 7786 CAN(A)D1801311
Muito obrigado!.
DennisBa said:
Hello,
i buyed a Taffio S200 Android Radio for my Opel Astra J with an Octa Core PX5 2GB Ram and 32Gb
Can anyone tell me how i come into the Recovery Mode? The Radio havn't any Buttons, only a small Reset Button. I tryed it with Terminal Emulator but it's rebooting i see a little bit like Recovery Menu but than it's rebooting again to Android.
I search a Custom Rom too, but i only read about MTCD and MTCE but my device shows MCU version: 2018-04-16 17:04:06 ZHAN_(NOR)_90_C9RD6686_CAN(A)PX5D1804160.
I couldn't find anything about this mcu.
Have anyone an idea how to root this device? I can't try a lot of things, because i can't restore a brick without Recovery Menu and stockrom.
Click to expand...
Click to collapse
Hi, my car is a Opel Astra J, too and I need to reflash the MCU. I flashed the wrong one... Can you share your MCU maybe? Thank you!
Or maybe someone could share this firmware to me like in the pictures? After flashing wrong MCU and newer system version, my Canbus Box and car won't be detected anymore.
I need this firmware with ZHAN(NOR) MCU (for Opel Astra J).
Anyone who can help me?
Please check out my own thread here:
Winca/Roadnav S200 PX5 ZHAN_(NOR) MCU & firmware (Opel Astra J)
Hi guys. Maybe and hopefully someone of you can help me here. I bought a used Android system based on the Winca S200 with ZHAN_(NOR) MCU for the Opel Astra J. While looking for new system software I stupidly flashed a newer system version, but...
forum.xda-developers.com
If anyone has a dump/backup of this firmware and mcu, please let me know.
Big thanks in advance.
Good morning..
I ask for your help.
Few years ago
I bought an Android radio, unfortunately I don't know what it is.
Today I need to update it if possible, but I don't understand what model it is.
I enclose any useful information, grateful if you can help me.
thank you all
Hi.
I disturb you for having an opinion on the possibility of recovering an Android PX5 car radio that I upgraded to Android 8 by following the instructions on the XDA form
https://forum.xda-developers.com/and...units-t3847477.
Unfortunately now the car radio looks as if it is going into a loop and does not give me access to recovery.
Before attempting to update the firmware I had upgraded the Mcu KLD 2.60b2 version to the KLD 3.01 version without having any problems whatsoever.
I tried several things but maybe I lost my compass and to avoid other problems I would like to get your opinion first.
I enclose a video illustrating the current situation.
https://youtu.be/uReSCNkd_VE
..Sorry for my english
Regards
Hello peeps, i am a happy owner of a seat leon. When I bought the car there was a android radio built in. I am very happy with the fact that everything is working great except, the software is very old. I am tying to find a update for this software i’ve been looking for weeks but still no result found.
This is all of the information that I got about the device.
Information:
Android-Version:
5.1.1
System Info:
APP 1024x600 2016-09-03 15:15:16
MCU Version:
2016-01-15 16:09:46 KYD_60_C6R_R76_CAN(DAZHONG0)
I really hope that someone can help me out with the problem. I also found out the passcode off the system.