Related
Key Features of CodeRom NexusAce XXKPH 2.3.4:
• A2sd darktremor ready with A2SDGUI (credits to them)
• EXT4 support
• Rooted and Deodexed
• Used custom bootanimation.zip and powersound disabled (update: use nexus S bootanimation)
• Power menu add on: reboot, recovery, download mode (credits to: da_jok3r from 4pda.ru; sk0t and Lovetz)
• Remove some stock apps: SamsungApps, Samsung Stock Clock etc.
• Updated Google Apps & Other: Google Maps, Gmail, Messaging (with theme option), Root explorer, 3 fonts preinstalled (as seen on Galaxy Tab)
• Now with A2SDGUI support
Pre-flashing check list:
• Open KIES and backup your contacts and Bookmarks. (If you have any other app like MYBACK PRO, then you can skip this step)
• Backup your applications using Titanium Backup or any other non-rooted back up apps like App Monster.
• Make sure your phone's battery level is more than 70% before installation.
• Make sure your sdcard was inserted and has been formatted into ext4 partition.
(I am sorry I don’t have time to prepare tutorial to format SD into ext4, once completed. I will place the link here)
Tutorial to flash Samsung Galaxy Ace S5830 to CodeRom NexusAce XXKPH 2.3.4:
• First download CodeRom NexusAce rar file package which contains all the essential firmware flashing tools. Please note that after downloading the rar file, you will have to place the file on desktop and then extract the same. Use below link to download.
*MOD REMOVED* NO WAREZ*
• Check whether extracted folder contains these key files COPPER, APBOOT, MODEM, CODEROMNEXUS, CSC and of course ODIN Multi Downloader v4.38
• Open the Odin Multi downloader v 4.38 file from the extracted files after which you will see that a new window will be popping.
• Now, at this point of time you will have to ensure that the KIES is completely closed and also preferably close all other programs in your computer too so as to ensure that the software update process is not hampered or interrupted in any manner.
• After this you will have to make sure that your phone is turned ON in the download mode, the download mode can be turned ON by pressing Middle Key (OK Key) + Power key and Volume down Key simultaneously before connecting to PC after which the phone will enter in the download mode.
• So, after double checking that the phone has entered in the download mode and connect your phone to your PC, then yellow ID: COM block. Now, next up without changing any other parameters you will have to select the files as they are mentioned below, this is very important step, if any of the file is wrongly entered then you will end up bricking the phone for which we can’t be held responsible in any manner what so ever.
OPS – Cooper_v1.0.ops
BOOT – APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
Phone – MODEM_S5830XXKPH_CL260130_REV03.tar.md5
PDA – coderomnexus.tar.md5 (just ignore error message while inserting this file)
CSC – CSC_S5830SERKPH_CL260130_REV03_user_low_true.tar.md5
• After checking the entries as mentioned above, click on the “Start” tab which is just located above the “Select OPS” option. Please note that as soon as you click on the Start tab it will take 5 – 10 minutes to complete the firmware update process and its highly requested on not to interrupt the process as this may brick your phone permanently.
• You will see that after 5 – 10 minutes of time as mentioned above, the updation process is completed and you will have to wait till you see home screen in your phone and also you will have to watch out for Odin as you will see that a Blue colored box will be glowing up as “PASS”
• Now remove your phone safely from PC and go to settings and Locale to change language.
You may like the below links as well.
• Official ClockworkMod 4.0.0.9 Recovery for Samsung Galaxy Ace CodeRom NexusAce XXKPH 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1168417
• Tutorial to setup a2sd in SGA S5830 (CodeRom NexusAce XXKPH 2.3.4):
http://forum.xda-developers.com/showthread.php?p=15724057#post15724057
============================================================
Diliban. P (DP)
Phone: Samsung Galaxy Ace GT-S5830
Version: GingerBread 2.3.4 (KPH)
Rom: CodeRom NexusAce + CRT Animation + a2SD enabled
Recovery: ClockworkMod v.4.0.0.9
excellent tuto for newbies
Maybe put a reminder about flashing this with 80% or more battery..
Thanx alot! Really helpful. Waiting for tut for ext4 frmat'
Sent from my Galaxy ace using Tapatalk
Can i flash this rom via recovery....i'm a newbie here.. thanks
subaash said:
Can i flash this rom via recovery....i'm a newbie here.. thanks
Click to expand...
Click to collapse
U cant.. At least not yet.. For now just stick with Odin..
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Awesome Rom. Just can't get a2sd swap to work. Everytime i click the enable swap, it says "working" and then goes back to off. Any idea why this occurs?
code28h4p said:
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Click to expand...
Click to collapse
omg awsum newz ......
Sent from my GT-S5830 using XDA App
Hi izzoe,
I added the battery info in the thread. Thanks for reminding me.
code28h4p said:
Thanks for your tutorial...this guide was very usefully for a newbie like me...
And now i think it's a time for launch a new one fresh ROM here (not now actuallyy...maybe tomorrow)
Click to expand...
Click to collapse
That's good news.. So many good news (and good ROM) for Ace lately.. We are growing..
Hi Diliban ,
Five Stars for your detailed tutorial , will take some screens and attach it to this post so that it becomes more easier for newbies.
You have stated in you tutorial:-
" Make sure your sdcard was inserted and has been formatted into ext4 partition. "
Is this step really necessary , I have flashed with ROM's before without doing this .
I use ODIN to flash and remove SIM and SD card .
Please clarify ...
rajanprash said:
Hi Diliban ,
Five Stars for your detailed tutorial , will take some screens and attach it to this post so that it becomes more easier for newbies.
You have stated in you tutorial:-
" Make sure your sdcard was inserted and has been formatted into ext4 partition. "
Is this step really necessary , I have flashed with ROM's before without doing this .
I use ODIN to flash and remove SIM and SD card .
Please clarify ...
Click to expand...
Click to collapse
Never done this either, altough the only time I flashed my Ace it was the 2.3.3 update. I used ODIN and removed SIM and the SD card aswell. But it's not a custom ROM so I don't know if it really counts...
How can i fix gps problem,i cant switch on my gps with this rom.
Diliban said:
Key Features of CodeRom NexusAce XXKPH 2.3.4:
• A2sd darktremor ready with A2SDGUI (credits to them)
• EXT4 support
• Rooted and Deodexed
• Used custom bootanimation.zip and powersound disabled (update: use nexus S bootanimation)
• Power menu add on: reboot, recovery, download mode (credits to: da_jok3r from 4pda.ru; sk0t and Lovetz)
• Remove some stock apps: SamsungApps, Samsung Stock Clock etc.
• Updated Google Apps & Other: Google Maps, Gmail, Messaging (with theme option), Root explorer, 3 fonts preinstalled (as seen on Galaxy Tab)
• Now with A2SDGUI support
Pre-flashing check list:
• Open KIES and backup your contacts and Bookmarks. (If you have any other app like MYBACK PRO, then you can skip this step)
• Backup your applications using Titanium Backup or any other non-rooted back up apps like App Monster.
• Make sure your phone's battery level is more than 70% before installation.
• Make sure your sdcard was inserted and has been formatted into ext4 partition.
(I am sorry I don’t have time to prepare tutorial to format SD into ext4, once completed. I will place the link here)
Tutorial to flash Samsung Galaxy Ace S5830 to CodeRom NexusAce XXKPH 2.3.4:
• First download CodeRom NexusAce rar file package which contains all the essential firmware flashing tools. Please note that after downloading the rar file, you will have to place the file on desktop and then extract the same. Use below link to download.
*MOD REMOVED* NO WAREZ*
• Check whether extracted folder contains these key files COPPER, APBOOT, MODEM, CODEROMNEXUS, CSC and of course ODIN Multi Downloader v4.38
• Open the Odin Multi downloader v 4.38 file from the extracted files after which you will see that a new window will be popping.
• Now, at this point of time you will have to ensure that the KIES is completely closed and also preferably close all other programs in your computer too so as to ensure that the software update process is not hampered or interrupted in any manner.
• After this you will have to make sure that your phone is turned ON in the download mode, the download mode can be turned ON by pressing Middle Key (OK Key) + Power key and Volume down Key simultaneously before connecting to PC after which the phone will enter in the download mode.
• So, after double checking that the phone has entered in the download mode and connect your phone to your PC, then yellow ID: COM block. Now, next up without changing any other parameters you will have to select the files as they are mentioned below, this is very important step, if any of the file is wrongly entered then you will end up bricking the phone for which we can’t be held responsible in any manner what so ever.
OPS – Cooper_v1.0.ops
BOOT – APBOOT_S5830XXKPH_CL260130_REV03_user_low_true.tar.md5
Phone – MODEM_S5830XXKPH_CL260130_REV03.tar.md5
PDA – coderomnexus.tar.md5 (just ignore error message while inserting this file)
CSC – CSC_S5830SERKPH_CL260130_REV03_user_low_true.tar.md5
• After checking the entries as mentioned above, click on the “Start” tab which is just located above the “Select OPS” option. Please note that as soon as you click on the Start tab it will take 5 – 10 minutes to complete the firmware update process and its highly requested on not to interrupt the process as this may brick your phone permanently.
• You will see that after 5 – 10 minutes of time as mentioned above, the updation process is completed and you will have to wait till you see home screen in your phone and also you will have to watch out for Odin as you will see that a Blue colored box will be glowing up as “PASS”
• Now remove your phone safely from PC and go to settings and Locale to change language.
You may like the below links as well.
• Official ClockworkMod 4.0.0.9 Recovery for Samsung Galaxy Ace CodeRom NexusAce XXKPH 2.3.4:
http://forum.xda-developers.com/showthread.php?t=1168417
• Tutorial to setup a2sd in SGA S5830 (CodeRom NexusAce XXKPH 2.3.4):
http://forum.xda-developers.com/showthread.php?p=15724057#post15724057
============================================================
Diliban. P (DP)
Phone: Samsung Galaxy Ace GT-S5830
Version: GingerBread 2.3.4 (KPH)
Rom: CodeRom NexusAce + CRT Animation + a2SD enabled
Recovery: ClockworkMod v.4.0.0.9
Click to expand...
Click to collapse
im newbie.. i just want to ask if i need to update my froyo to gb 2.3.4 before doing this tutorial of this custom rom?.. and this custom rom supported tun.ko.. thanks...
how to ..
Hi Diliban,
I'm running 2.3.4 KPH from Samfirmware.
Can you share with me how to create zip to enable "Power menu add on: reboot, recovery, download mode"
Thanks
Is it necessary to format SD card in ext4 before flashing?
a few questions... i'm kinda new on this.
Before flashing any rom, I must do a wipe of everything .. data... etc right?
and... once I flash the rom, I have to root the device again?
thanks. why was the link removed?
unable to download. link not working. please give a mirror
MPAI said:
Is it necessary to format SD card in ext4 before flashing?
Click to expand...
Click to collapse
The answer is YES.
It highlighted in Pre-flashing check list on post #1.
I thought I would write this guide to help people who are having trouble with getting ICS to work reliably on their Galaxy Note. This guide is fairly beginner friendly but I do recommend that you quickly go through this once before you start. Also, this is a 'risk free' way of trying the ICS leak. You just need to have a nandroid backup from your current clockworkmod (or red-pill recovery) to try this out. If you do not like it, instructions are included on how to restore back to your Ginger Bread ROM. Hit the THANKS button if this helps. Happy Flashing!
Edit. CLICK HERE for my earlier thread demoing ICS on the Note. It has 3 videos that add up to 40 mins.
Edit 2. In case you have any trouble with the ROM and want to get back, I have now included a 'Getting back to your old Ginger Bread ROM' section in the end thanks to chasmodo. I do suggest that you read through for some user reports or better yet, try it yourself!
Edit 3. The guide now includes instructions to get TeamRocketROM ICS and criskelo's ICS ROM. I have had mixed results with these two ROMs. But feel free to try them out and see if they will work well for you. You will HAVE to install the CF repack ICS to be able to install other ICS ROMs. So follow the steps from section (2) until step 10 and choose either Section (4A) or (4B). A shout out to TeamRocket and criskelo. Original Thread for TeamRocketROM and Original Thread for criskeloROM.
Edit 4. MediaFire links for the essential files are now up. They are split into 200mb rar files. You will need WinRAR to extract them.
Index :
Section (1) Requirements
Section (2) Chainfire's ICS repack installation
Section (3) Bloatware List
Section (4A) TeamRocketROM installation
Section (4B) CriskeloROM installation
Section (5) Getting back to your old Ginger Bread ROM
Section (6) Recommended apps
Section (7) Tips, tricks & troubleshooting.
Section (1) : Requirements.
1) A Galaxy Note, obviously. It HAS TO BE model GT-N7000 (International) and NOT SGH-i717 (AT&T).
2) Samsung Kies, because it includes the latest Samsung drivers. Google it, download and install.
3) Stock GB ROM with a good radio. We are using a KKA for this. It is easily rootable AND it has a great radio. I have also included ODIN for convenience. CLICK HERE. | MIRROR | MF-Part1 | MF-Part2 | MF-Part3
4) Chainfire's CF-Root kernel/clockworkmod for KKA. CLICK HERE. | MIRROR | MF
5) Mobile ODIN Lite and files required to flash ROMs in one pack. OR you can get Mobile ODIN Pro from Market and support Chainfire's efforts. CLICK HERE. | MIRROR | MF
Note. Chainfire is one of the most prolific Android developers/reverse engineers and it will be worth every penny if you donate/buy his apps.
6) Chainfire's ICS repack. This includes CF-root kernel and clockworkmod. Package also includes the google apps zip. CLICK HERE. | MIRROR | MF-Part1 | MF-Part2 | MF-Part3
Check below for additional requirements for TeamRocketROM or criskelo ROM.
////// EXTRA REQs for TeamRocketROM //////
****ONLY IF YOU WANT TEAMROCKETROM******
Edit. MediaFire links are up for RocketROM.
1) TeamRocketROM ICS v1.4 CLICK HERE | MIRROR2
2) TeamRocketROM ICS v1.5 CLICK HERE | MIRROR2 | MIRROR3
3) 15 Button Toggle Bar CLICK HERE *OPTIONAL but recommended* CLICK HERE
Mediafire links (includes all 3 of the above files) :
MF-Part1 | MF-Part2 | MF-Part3 | MF-Part4
NOTE : You NEED to download BOTH v1.4 and v1.5 for installing v1.5.
////// EXTRA REQs for criskelo ICS ROM //////
****ONLY IF YOU WANT CRISKELO ROM******
1) Criskelo's ICS beta 1 ROM CLICK HERE | MIRROR2 | MIRROR3
Section (2) : Chainfire's ICS repack installation.
1) Your current firmware does not matter. It could be stock, stock & rooted, newer stock & ever-rooted, sammobile ICS, whatever. It's OK even if you're in a boot-loop or plain brick. It does not matter. But be prepared to loose all your app data and also maybe the files on the INTERNAL sd of the phone. This is MEANT as a clean, fresh install. Although you will get back most of the essential stuff once you logon to you google account on the new ICS.
2) MAKE SURE YOU HAVE ATLEAST 50% CHARGE.
3) Extract the file named " N7000XXKKA_N7000OXXKK5_AUT.rar". You will find three files there, .DLL, .TAR.MD5, .ZIP. Extract the zip file. Right click on 'Odin3 v1.85.exe' and click 'Run as administrator'.
4) Now you need to put your phone in Download mode. Turn off your phone if it is on. Hold volume down, home and power together and keep holding them until you see a screen that says Warning on top with a yellow warning symbol. As soon as you see the screen, you need to push the volume UP button to get into download mode. If you miss it, try holding down the three buttons and repeat. The download screen has an android with 'Downloading...' written in the bottom.
5) Now that you are in download mode, go ahead and connect the Note to your computer. If you installed Kies correctly, it will install the drivers for the new hardware and say that the device is ready for use. Now, on the ODIN screen you should see "Added" in the 'Message' window on the left. Now, click the "PDA" button and select the file that ended with .TAR.MD5. Make sure ONLY "Auto reboot" and "F. Reset Time" are checked. Say start and the flashing should begin. DO NOT INTERRUPT THIS UNTIL IT IS COMPLETED.
6) Once the flashing ends, your phone will reboot. Give it upto 5 minutes because it is the first boot. If it is stuck in a boot loop (or if things are force closing on the setup screen), hold down volume UP, home and power button together until you get into the recovery menu. Navigate the recovery using volume and home buttons. Now select the "Wipe data/Factory Reset option", select the Yes option and proceed to wipe the phone. Once done, select the reboot option and your phone should turn on now. Do not setup any accounts and just click through the setup screens. Reboot the phone.
7) Now you have a nice clean stock ROM. We will proceed with the rooting now. Go to settings and 'Applications' and enable 'Unknown sources', then go to 'Development' and enable "USB debugging". Now extract the file " InitialCFRootFlasherKKA". You will see a "not-rooted-yet.bat". Right click and run as administrator. Click enter to continue and now it should say "--- STARTING ---" and "found a samsung" and all that. If you get to the part where it tells you that it is going to flash the cf-root kernel too fast, the adb server probably failed to start. So, you need to close the bat file and run it again as admin. If everything goes right you should see the zergRush exploit in action and after some time it will tell you that it will attempt to flash cf-root kernel. Hit enter, it will flash the kernel and reboot. Congratulations, you now have root and clockworkmod.
7b) PERFORM A NANDROID BACKUP (optional but recommeded) : Turn your phone off. Hold volume UP, menu and power until you reboot into clockworkmod recovery. Go to 'backup and restore' and select backup. Clockworkmod will now create a nandroid backup of your rooted GB rom. So if you decide to g back to GB or try out different ICS roms, this will be really helpful.
8) Now we need to install Mobile ODIN Lite. Extract the file "Mobile_ODIN_Lite_GTN7000". You will see two apks. Now extract "CF_ICS_REPACK_GAPPS_INCL". You will see a .TAR and .ZIP. DO NOT EXTRACT ANY OF THESE FILES. Transfer all these files to your sd card using USB. You can go to 'Wireless and network' menu in settings and then 'USB utilities' to enable mass storage.
9) Using the included 'My Files' app, navigate to the apks. (Note. If you put your files in the external sd there is a folde called "external_sd" in My Files to take you there.) Install " MobileODINLite-v2.15" and then install " MobileODIN_FlashKernel_N7000-v2.0". Now launch Mobile ODIN. It should ask for su permissions and select "Allow" make sure the "remember" option is checked. Select 'Open file' and navigate to wherever you put the "I9220LP1-N7000-ICS-REPACK.tar" file transferred earlier. It should say that it has loaded the file. You will notice the 'Modem' and 'Param' fields are empty, that is fine. Scroll down to 'Flash firmware' and select 'Continue'. Mobile ODIN will boot into recovery and proceed with the flashing. DO NOT INTERRUPT THIS UNTIL IT IS COMPLETED.
### OPTIONAL STEP *ONLY* FOR ROCKETROM/CRISKELO-ROM : Once the flashing is complete, it will take you to clockworkmod. Perform a 'wipe data/factory reset'. Reboot. *SKIP TO SECTION 4A/4B* for further instructions.
10) Once the flashing is complete, it will take you to clockworkmod. DO NOT REBOOT. Navigate the recovery using volume and home buttons. Select 'Install zip from sdcard' and then 'choose zip from sdcard', navigate to 'gappsv7.1.zip.' Proceed to install the zip. Navigate back to main menu and select 'wipe data/factory reset' and say yes. Now select 'reboot system now'.
11) You should now have a stable, rooted ICS. BUT we need to get rid of all the bloatware before we can proceed. There is no set up screen. If your screen in all black when it boots up, that is fine. Reboot the phone. Reboot it again, just to be sure. Get Titanium Backup free either with market, or with the apk. You will need to set up your google account before you can download through market. Once you have Titanium Backup, the clean up begins. You will need to enable 'Unknown sources' under 'Security' and 'USB debugging' under 'Development' before you can use Titanium Backup.
12) Launch Titanium Backup it will ask for root and allow it. Click through the popups. Click the Backup/Restore tab. We begin from all the way dowm, so scroll down all the way. You can uninstall an app by clicking on the app and selecting "Un-install !" option. Click OK on any warnings you will see. Below is a list with the apps that I personally like to remove. It includes the "Samsung Hubs" because they mostly serve Chinese content.
Section (3) : The Bloatware list
-Two apps with Chinese characters at the very bottom.
-Zinio
-Youko
-wikiAR
-weibo
-VIVA magazine
-Trim
-TaoBao
-Straight Flush
-Software update (BOTH of them)
-Social Hub (BOTH)
-SNSAccountRr
-SNSAccountQz
-SNS disclaimer
-Sina weather, stock & news.
-RenRen
-Readers Hub
-Qzone
-QQ Browser AND QQ
-PressReader
-Palmenews & palmebook
-Navigation (This is NOT google navigation)
-Music Hub
-Media Hub
-Kobo
-Dictionary
That's it! Restart your Note and you should have a great, fully-functional ICS ROM! This procedure has been thoroughly tested by me and works every time. ALSO scroll down to check out the recommended apps for better functionality.
Section (4A) : TeamRocketROM ICS installation
****THIS SECTION IS TO BE FOLLOWED ONLY IF YOU WANT TEAMROCKETROM******
1) Once you are done with step 10 from Section (2) you should have the CF repack which forms the base for a lot of other ICS ROMs out there. So you absolutely NEED the cf repack running. If you don;t have it, go back to Section (2) and follow steps from 1 through 10.
2) Transfer the files "TeamRocketRom_ICS_Notev1.4_beta", "TeamRocketRom_ICS_Notev1.5_beta" and "Reworked_15ToggleBar_for_TeamRocketROM_v1.5" to you internal or micro sd. DO NOT UNZIP THEM. Turn off your phone and hold down volume UP, menu and power until you boot into clockworkmod recovery.
3) Now you need to perform a full wipe. Select "wipe data/factory reset" and yes. Now select "wipe cache" and select Yes. Go to advanced > Wipe dalvik cahe > Yes. Select back to go back to main menu.
4) Select "install zip from sd card" > choose zip from sd card > now navigate to the "TeamRocketRom_ICS_Notev1.4_beta" file. Remember it is *1.4*. Slect the file and proceed to flashing. After it is done flashing, perform a full wipe like we did in step 3 (wipe data/factory reset, wipe cache and wipe dalvik cahe). THIS IS ABSOLUTELY ESSENTIAL.
5) Once you are done performing the full wipe, go back to the main menu and hit "reboot system now". The phone will reboot, give it some time. Once it is up and running, quickly setup your google account.
6) Now turn the phone off and hold voulume UP, menu and power to get into cwm. Select "install zip from sdcard" > choose zip from sd card > now select "TeamRocketRom_ICS_Notev1.5_beta". Remember, THIS TIME IT IS V1.5. After it is done flashing, do not do any wipes. Go back to main menu and reboot the system.
7) Wait till the phone boots, it will take some time. Go settings and about to verify that you are running RocketROM v1.5. Now, for the final part.
8) Turn off your phone and hold down volume UP, menu and power until you boot into clockworkmod recovery. Select "instll zip from sd card" > "choose zip from sd card" > now select the "Reworked_15ToggleBar_for_TeamRocketROM_v1.5" zip file and let install. Once done, don't wipe anything. Go back to main menu and reboot system. Congrats! You are now running TeamRocketROM ICS v1.5.
Section (4B) : criskelo ROM ICS installation
****THIS SECTION IS TO BE FOLLOWED ONLY IF YOU WANT CRISKELO ROM******
1) Once you are done with step 10 from Section (2) you should have the CF repack which forms the base for a lot of other ICS ROMs out there. So you absolutely NEED the cf repack running. If you don;t have it, go back to Section (2) and follow steps from 1 through 10.
2) Transfer the file "CriskeloRomNOTE.vICS-V1-Beta1-MD5-79520216F3E0F9D0DC5F87EB82EBB143" to your internal / micro sd. DO NOT UNZIP. Turn off your phone and hold down volume UP, menu and power until you boot into clockworkmod recovery.
3) Now you need to perform a full wipe. Select "wipe data/factory reset" and yes. Now select "wipe cache" and select Yes. Go to advanced > Wipe dalvik cahe > Yes. Select back to go back to main menu
4) Select "install zip from sd card" > choose zip from sd card > now navigate to "CriskeloRomNOTE.vICS-V1-Beta1-MD5-79520216F3E0F9D0DC5F87EB82EBB143". Select file and proceed with installation.
5) After it is done flashing, perform a full wipe like we did in step 3 (wipe data/factory reset, wipe cache and wipe dalvik cahe), just to be sure. Go back to main menu and select reboot system now. Enjoy your criskelo ROM!
Section (5) : Getting back to your old Ginger Bread ROM :
If your having troubles and want to go back to your old GB ROM, this is how you restore. Credits to chasmodo for the instructions.
1. download AbyssNote 3.9 kernel from HERE | MIRROR. It's a flashable zip.
2. put this zip on your SD Card before you try to restore your previous system
3. when you want to restore, power off your phone
4. boot into recovery (Volume up + Home + Power)
5. chose 'install zip from SD Card'
6. navigate to your Abyss kernel zip and flash it
7. go back to the Recovery start menu
8. go to advanced/reboot recovery <--- this will reboot the phone directly to recovery
9. you will discover that you now have Hyperdroid Redpill Recovery - it comes with the Abyss kernel - it's pretty much the same thing as CWMR
10. wipe cache, dalvik, do your factory reset
11. start your restore, and it will work.
Section (6) : Recommended apps
- Go Keyboard - Great, highly customizable keyboard. Includes emoji, touch tone keypad, smileys and themes. Does not lag.
- Nova Launcher - Awesome launcher meant ONLY for ICS. Highly customizable with stock ICS look and feel. Very stable too. Includes persistent search bar, dock pages, etc. Original thread HERE.
- Winamp - Really good music player with great navigation and a good looking widget. Also includes lock-screen integration.
- Airdroid - This app is must have for anyone who want to sync their phone wirelessly over wifi. Free and awesome.
- MX Video - Excellent video player. Essential for this ROM because stock player does not function. Has great gesture controls and plays almost anything you throw at it.
- ROM Manager - ONLY IF you are having trouble with force closing apps and general freezes, get ROM Manager and run 'Fix permissions'. I recommend that you do not mess with any other option on ROM Manager unless you know what you're doing.
Section (7) : Tips, tricks and troubleshooting
-- 14 Button Toggle Bar : This is a very nifty little UI tweak by Chris X.. Original post here. It is basically a really cool looking Notification bar with a lot of toggles. I have included a screenshot below. This tweak also works on criskelo ROM. I haven't tested it with chainfire repack, but you are free to give it a try. CLICK HERE to download.
-- Get stock ICS icons for CF repack (Nova Launcher) :
For ICS icons on your Homescreen, download "Ice Cream Sandwich (theme)" by kovdev from Market. Now go back to your Nova Launcher homescreen, tap and hold the icon you want to change and hit edit. Now click on the icon, select "ADW Icon Pack" and proceed to select the appropriate icon. However, the icon will only change on the homescreen and not the app drawer.
-- SoD & Freezes : If you are getting random freezes and/or Screen of Death issues, remove your SIM and microsd, transfer all the required files to internal memory and start over. You can also try using clockworkmod or ROM manager to fix permissions.
Hit the Thanks button if this helps at all. All credit goes to everyone who deserves it. Especially Chainfire. And remember, hit the Thanks if it helps. Good day.
will this work on a non stock rom? ie. Romow v8, abyss kernal 4.0?
Im just waiting for the checkrom version of ICS
dr. xp55 said:
will this work on a non stock rom? ie. Romow v8, abyss kernal 4.0?
Click to expand...
Click to collapse
Yes. I assume you're already rooted? So you can just start from step 8. If you have a good baseband from Romow, I think you will be just fine.
toofank said:
Im just waiting for the checkrom version of ICS
Click to expand...
Click to collapse
Oh well... You can always update. ICS to ICS upgrades shouldn't be too hard.
acidburn89 said:
Install " MobileODINLite-v2.15" and then install " MobileODIN_FlashKernel_N7000-v2.0".
Click to expand...
Click to collapse
Hello,
I have mobile odin pro which downloaded something I started an app for the first time ( i think it was flash kernel, but I'm not sure) ...
Do I need to install MobileODIN_FlashKernel_N7000-v2.0 ?
And I have stock KK5 rooted, that means I can start from step 8 ?
edit: just read the official Mobile Odin page here, and the last sentence states that only Lite users have to manually download flashkernel
just follwoed all ur steps from step8 coming darky rom 3.3 worked perfectly thanks alot man!!!!!!!
Did everything from step 8, successfully flashed ICS and removed bloatware
Thanks a lot
i9000gt said:
just follwoed all ur steps from step8 coming darky rom 3.3 worked perfectly thanks alot man!!!!!!!
Click to expand...
Click to collapse
turshija said:
Did everything from step 8, successfully flashed ICS and removed bloatware
Thanks a lot
Click to expand...
Click to collapse
I'm glad I could help.
theres a problem theres no keybaord only stupid voice and when i installed ics keybaord the whole os keeps crashing. its too late for this i got work tommorow what am i to do
i9000gt said:
theres a problem theres no keybaord only stupid voice and when i installed ics keybaord the whole os keeps crashing. its too late for this i got work tommorow what am i to do
Click to expand...
Click to collapse
Did you make a backup in cwm by any chance? If you didn't, you might just wanna start from step 1 again. Trust me, it wont take long now that you have done it once. I did the whole thing over just to write the guide. Took me about 30 minutes.
Edit. Hold on a sec! Did you say you just 'installed' the keyboard? Through market, right? If you did it by market and do not alter any system files with clockworkmod or root explorer then, you can boot into cwm by volume up, home and power and wipe your device. Everything should be back to normal after that. You won't lose root.
is there no way i can download any keyboards apks? i just need it so that i can sign onto my gmail account?
i9000gt said:
is there no way i can download any keyboards apks? i just need it so that i can sign onto my gmail account?
Click to expand...
Click to collapse
I thought your whole ICS was being unresponsive. Just do a wipe. Or get apks for a third party keyboard. Go keyboard is what I use. Just google "go keyboard apk download"
acidburn89 said:
I thought your whole ICS was being unresponsive. Just do a wipe. Or get apks for a third party keyboard. Go keyboard is what I use. Just google "go keyboard apk download"
Click to expand...
Click to collapse
Lol yeah go keyboard worked perfectly. I must say this keyboard is kinda awsome too lol gonnakeep this one!!!! This thanks mate
just do as the he said n everythin works like charm finally usin ics thx alot
acidburn89 said:
I thought your whole ICS was being unresponsive. Just do a wipe. Or get apks for a third party keyboard. Go keyboard is what I use. Just google "go keyboard apk download"
Click to expand...
Click to collapse
Lol yeah go keyboard worked perfectly. I must say this keyboard is kinda awsome too lol gonnakeep this one!!!! This thanks mate
i9000gt said:
Lol yeah go keyboard worked perfectly. I must say this keyboard is kinda awsome too lol gonnakeep this one!!!! This thanks mate
Click to expand...
Click to collapse
Yeah, it's a great keyboard. I have reduced the height of the keys by one unit in both portrait and landscape. I also have the emoji plugin, which is kinda cool. 0_o
Fail, I liked the new Gmail, but everything seemed so big, since I got used to 240 dpi, downloaded DPI Changer from Market, decreased DPI, and after that I couldn't boot
So I had to flash stock rom using Odin, and start over ...
Now I've just rooted stock rom, and waiting for battery to charge over 50%, since all these flashing and rooting sucked most of the juice out of it
Btw, the best keyboard in my opinion is "Thumb Keyboard"
So you're saying it's FULLY FUNCTIONAL? As in everything works just as well or close to the stock rom? Then no need for me to wait for the official release from Samsung?
If so, I'll do it baby.
I am amazed how smooth this rom is
So far its stable, we will see that in few days
DN5 NOTE 5/S7 V0.41 - v0.5 - 0.6//// DN7 NOTE 7( lattest) ALL GUIDES...DOWNLOAD LINKS, ADD ON AND MINOR FIXES BY ALL INVOLVED DEVELOPER AND MEMBERS....ALL IN 1 PLACE
I just collect and share all these in 1 place to make easier for member to install and download this rom....non of these are mine....all the involved developers and members should get the credit
* you take the reponsbility and risk of what happen to your phone following this guide..fixes and downloaded file
Releted to original thread
http://forum.xda-developers.com/note-4/development/5-0-1-dn-rom-e-team-t3031712
how to (working for v0.5)
1. Using twrp recovery
2. Wipe everything(clean install)
3. Flash dn5 v0.4 (dont restart)
4. Wipe dalvik/Cache (dont restart)
5. Flash suemax kernel (dont restart)
6. Wipe dalvik / cache (dont restart)
7. Flash edge+people & glow
8. Wipe dalvik/cache
9. Restart
10. using twrp recovery
11. Flash dn5 v0.41(update)
12. Restart( you are done here if you dont need exposed)
13. install xposed v3.0 alpha4 apk
14. using twrp recovery
15. flash xposed framework( xposed-v74-sdk22)
16. Restart enjoy
17. for skip music player bug please open developers in seting and disable "Use AwesomePlayer"
18. enjoy
How to install edge glow for dn5 v0.5
1. Using twrp recovery
2. Wipe everything(clean install)
3. Flash dn5 v0.5 (dont restart)
4. Wipe dalvik/Cache (dont restart)
5. Flash suemax kernel lite 1.1 stable for 910c*(dont restart)
6. Wipe dalvik / cache (dont restart)
7. Flash edge+people & glow
8. Wipe dalvik/cache
9. Restart
all download link
DN5 note 4 v0.5(1.43 Gb) 19 nov 15
http://electron-team.com/galaxy-note/note-4/ditto-note-5/sm-n910c
suemax kernal 1.1 lite n910c : (working for v0.5)
http://forum.xda-developers.com/note-4/development/kernel-suemax-kernel-lite-v1-0-t3221865
N910C/H v1.1 Stable
suemax kernal 1.2
http://forum.xda-developers.com/showthread.php?p=63872178
suemax kernal 1.4(stable)
http://forum.xda-developers.com/showpost.php?p=64455456&postcount=847
synapse app(control kernal) (working for v0.5)
- set GPU gavenor from interactive to default
- Wireless Wakelock Timeout Control to 4
- Enable Gentle Fair Sleepers on
https://play.google.com/store/apps/details?id=com.af.synapse
edge plus+glow : (working for v0.5)
https://mega.nz/#!N5xUGS5I!u9-G1z7R_81akI70x8MNVo4Q_esqABm0fKoju7ALCC0
xposed : (working for v0.5)
1) Xposed By-wanam
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
add on for those who like to use note stock camera over note 5 camera Here is the zip for the stock Note 4 Camera*
by @agentdeep
http://forum.xda-developers.com/showpost.php?p=62934002&postcount=1431
1. Install the zip from recovery
2. Reboot then wipe data of Camera and Gallery
3. Install App Settings module in Xposed and set 640 DPI for the camera
4. Reboot and enjoy*
OR
(working for v0.5)
This is a Note 4 camera with already changed dpi ... just flash it via recovery(1)
1) https://mega.nz/#!5JIUjZpB!bIzNRvt860P-BBgppyEvOgsOPH8wHHBSqC7039G1NLg
2) download and replace existing camera apk with this one( set permmision rw r r)using es explorer or roor exporer and reboot
https://mega.nz/#!SNQBmRTQ!z4E5cLs_Og8nkFI0v89es9tYq_kqDd4T25pU6JIbFbI
REMOVE BLOATWARE OR UNWANTED APP
1- download sytem app remover From playstore
https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp
OR
bloat app remover scrip for DN5 (working for v0.5)
try this flash in recovery attached file
will remove
app:
AASAservice
AntHalService
ANTPlusPlugins
ANTPlusTest
ANTRadioService
BeamService
Bridge
Chrome
ChromecastFrameworkService
ChromeCustomizations
Facebook_stub
FBAppManager
FBInstagram_stub
FBMessenger_stub
Foundation
Gmail2
Hangouts
Hs20Provider
KeyguardWallpaperUpdator
MSSkype_stub
Music2
OCRService
OneDrive_Samsung
OneNote
Photos
RCPComponents
SamsungIRMService
SecurityManagerService
SecurityProviderSEC
Stk2
UniversalMDMClient
UniversalSwitch
WhatsAppDownloader
withTV
YahooLiveWeather
YouTube
priv-app:
AndroidForWork
Excel_SamsungStub
FaceProvider
FBInstaller
Fmm
FotaClient
IAP_release
Kies
Multiverse
PowerPoint_SamsungStub
RNB
RNBShell
SamsungBilling
SmartSwitchAgent
SPDClient
SyncmlDM
VRSetupWizardStub
Word_SamsungStub
download : http://forum.xda-developers.com/attachment.php?attachmentid=3533580&d=1446853960
modem and bootloader
This is the modem and bootloader for N910C flash it via odin in (AP) not in (BL)* based on OH4
https://mega.nz/#F!QcZE1TBA!jbKEb-XRKuRJ8tdND9RBiQ
modem jo5 flash it via recovery
https://mega.nz/#!cBwHhCiC!itX1LatpyKGwALbpxR2fNF3PDPrp6ZXS1KV0O6p9wUk
bootloader jo5 flash it through odin in (BL)
https://mega.nz/#!4AZkRRIZ!4GYQT8-zOHpSk36Ap2nxyX9iFf60Bj-5hRokbooFr-I
more stuff (working for v0.5)
This is a modded play store V6.0.5 the last one*
Install it like normal apk
*(install this over for those who have problem with playstore)
https://www.dropbox.com/s/cy5nbsgiws4kqxl/Play_Store_6.0.5_Patch_ZM_NoUp_RR.apk?dl=0
3minit battery . It will changed the battery icon
Just flash it via recovery . It works on DN5 V.4
http://forum.xda-developers.com/showpost.php?p=63935358&postcount=4006
Basic clean install guide
Full wipe and clean install
( for picture guide look here http://forum.xda-developers.com/showthread.php?p=63916925)
1) reboot recovery twrp
2) wipe>>advance
3 delvic cache...system...data....internal storage and cache
4) in main menu>> INSTALL >> SELECT ROM
5) WHEN DONE REBOOT SYSTEM
Tips for good bettery life(working for v0.5)
Read this post
http://forum.xda-developers.com/showthread.php?p=63966609
-- s note latest version --
- flash via recovery
http://forum.xda-developers.com/showthread.php?p=65669928
--Fixes--
PDF export in S Note force closing fix(working for v0.5)
http://forum.xda-developers.com/showthread.php?p=63924125
6 icon dock touchwiz home and 35 dpi for icons.(working for v0.5)
http://www.mediafire.com/download/zpsxt3gl8xayswn/TouchWizHome_ZERO_6dock.zip
fix for DN5: IdeaSketch(working for v0.5)
https://www.dropbox.com/s/d5yu1iplwveajmr/IdeaSketch_For_DN5.apk?dl=0
Scroll capture alignment fix....By- ozkaya (working for v0.5)
http://forum.xda-developers.com/showthread.php?p=63985766
Note 4 video editor By-Sawdoctor
http://forum.xda-developers.com/showthread.php?p=63925891
Note 5 ui (Animated toggles like Landscape/Auto Rotate, sync arrows rotate when turned on, Wi-fi bars lights up depending on how many bars you have).
http://forum.xda-developers.com/showthread.php?p=63928319
DIAGNOSE
BETTER BETTERY STAT(BBS) by @chamonix
Thread http://forum.xda-developers.com/showthread.php?t=1179809
Download
http://forum.xda-developers.com/attachment.php?attachmentid=3500802&d=1444382813
How to prepair dump for bbs
Please read the BBS thread
If you need help
Most of the times a dumpfile is helpful, sometimes screenshots showing your observations may help as well.
Before posting a dump please make sure that the references for kernel wakelocks and alarms were processed correctly. Reading a dump takes a few minutes and it would be great if you could not waste the time of whowver studies in, aiming at helping you.
Generally a dump "since unplugged" is better than "since charged". When you start your analysis make sure to follow following procedure:
- plug/unplug the charger
- leave the phone alone 1-4 hours( preferred to get a dump over night)
- save a dump and check that the chapters "Kernel wakelocks" and "alarms" (if you have root) are populated
- Post the dump as attachement
THEMES
THEMES FOR TOUCHWIZ DN5 FROM S6
(Not in theme store for note 5)(this is not hack or warez....this is only a work around how to install and use s6 theme) all theme are free
Installation with apk wihout the need to flash in recovery
A)Select and download themes collection here by @Gunthermic
(See page 1 in thread for many collection of themes)
http://forum.xda-developers.com/ver...e-samsung-stock-s6-themes-collection-t3080847
B) installation method - make sure you are on stock theme( It's a new way invented by @bobster0203 )
1) after download open zip file
2) inside zip you will see a tones apk
3)FIRST select and install the main apk >> (main apk - the biggest size apk amount all)
4)SECOND select and install a apk with part name WALLPAPER
5)installation can take up to 2 minute
6)use es explorer/root explorer
7)Move the .json file from data/overlays/jsonfiles/trialjson into userjson
8)Delete preferences folder in data/overlays(don't worry. It will be created again after reboot)
9)Reboot
10)Apply the theme. If some status bar icons doesn't change correctly, reboot again
Enjoy
Preview
https://www.dropbox.com/s/ibjp5k26g03b9ts/Screenshot_2015-11-28-14-12-19.jpg?dl=0
Gallery apk
https://www.dropbox.com/s/n3msrwnx2a0h9ns/SecGallery2014L.apk?dl=0
Add all app to multiwindow dn5 v0.5
http://forum.xda-developers.com/showthread.php?p=64491453
DN5 0.6 MM 6.01 (base from s7+note 5 rom)
NOOB GUIDE FOR FLASHING DN5 V 0.6 MM
let say you currently on DN5 V 0.5 LOLIPOP
1 - download MM bootloader, modem and rom(0.6)
2 - flash bootloader via odin
3 - flash lattest twrp (v 3.0 2-0)
4 - boot to recovery
5 - make backup if needed
6 - wipe >> advance
- delvic cache
- system
- data
- internal storage
- and cache
4) in main menu>> INSTALL >> SELECT ROM
5) WHEN DONE REBOOT SYSTEM
first boot will take some time....hold your horses[emoji6]
DN5 V0.6 MM : http://forum.xda-developers.com/note-4/development/5-0-1-dn-rom-e-team-t3031712
bootloader and modem : http://forum.xda-developers.com/showthread.php?p=58867937
OPTIONAL SUEMAX KERNAL 1.0B(stable)
dload and flash via recovery
suemax kernal 1.0b : http://forum.xda-developers.com/showthread.php?p=66310192
HOW INSTALL ON 910H
1 - download rom
2 - flash rom with full wipe
3 - flash kernel for N910H ( Suemax or H vitamin )
4 - flash modem for N910H ( search in thread )
5 - reboot
ROOT FIX
if you acidently wipe cache after flashing rom..you will lose root access. reflash super SU in recovery...you may try this
super su beta http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
CAMERA LOW LIGHT FC FIX
Camera low light FC Fix:
- Go to system/framework
- rename your old seccamera.jar to seccamera.old
and put the new in (fix the permissions: rw-r--r--)
http://forum.xda-developers.com/showthread.php?p=67211544
DEBLOAT MANUALY(remove blaot ware)
After install rom download system app remover from playstore and remove any system app you like on your own risk
note: do not remove facebook, if you do screen auto rotate wont work
system app remover : https://play.google.com/store/apps/details?id=com.jumobile.manager.systemapp
FOR GOOD BETTERY LIFE
install :
1 - GREENIFY
2 - POWER NAP
3 MINUTE BETTERY WITH CENTER CLOCK
Iinstall : http://forum.xda-developers.com/showthread.php?p=67233751
revert stock : http://forum.xda-developers.com/showthread.php?p=67252255
Galaxy Note 4 N910 C Ultra High Quality Camera Mod MM
http://forum.xda-developers.com/note-4/themes-apps/galaxy-note-4-n910c-ultra-quality-t3356025/post66294244
GOOGLE MAP FIX
- every time reboot it promp for access
solution : just flash the 32bit google map app from note 4 over the one in DN5 0.6/0.61
LINK : http://forum.xda-developers.com/note-4/development/5-0-1-dn-rom-e-team-t3031712/post67709782
DN7 V0.1 - NOTE 7 - 910C/H
how to install DN7
1. Using twrp recovery
2. Wipe everything(clean install)
3. Flash dn7 (dont restart)
WAIT FOR 10 MINUTE AND DONE
MAIN THREAD http://forum.xda-developers.com/note-4/development/5-0-1-dn-rom-e-team-t3031712
HOW RO INSTALL XPOSED ON DN7
1. Install "XposedInstaller_3.0_alpha4.apk"
2. Reboot recovery
3. In recocery flash "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip"
4. Reboot system...wait it will take some time.....DONE
5. and browse for any module you want in xposed
6. After select and install module....make sure (✔) the installed module...and reboot phone....there you go
Dont forget to download the "xposed-uninstaller-20160530.zip" incase you mess up.....boot recovery and flash....you phone will revive
how exchange stock smart manager to note 7 china smart manager
- download https://mega.nz/#!iAwCzLhY!RdM_wPoZocYE27BwoNGd48rii5Zs5QaNSgd1Lks03CU
- in ROOT >> SYSTEM >>PRIV APP rename the stock SmartManager_v4_DeviceSecurity and SmartManager_v4 with .bat at the end
- extrac the downlodedzip .. there will be 4 folders....place them in ROOT >> SYSTEM >>PRIV APP
- make sure set all apk or libs attribute to rw r r (644)...after that reboot RECOVERY ..WIPE CACHE/DALVIC CACHE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AUTO DEBLOAT NOTE 7 ROM
- Download and flash in recovery - http://forum.xda-developers.com/showpost.php?p=69891651&postcount=8829
DN7 Debloat free up to 315 mb. overall u just have 1.3 gig DN7 Rom
This will delete
system/app:
AASAservice
AdvSoundDetector2015
AndroidPay
AntHalService
ANTPlusPlugins
ANTPlusTest
ANTRadioService
ApexService
AppleMint
BasicDreams
BCService
BeamService
BluetoothTest
bootagent
BriefingPanel
CarmodeStub
ChocoEUKor
Chrome
ChromeCustomizations
CnnPanel
ColorBlind_M
commonimsservice
ControlTV
CoolEUKor
CoreApps_SDK
Drive
EasySidePanel
ESEServiceAgent
Facebook_stub
FactoryCameraFB
FBAppManager_NS
FBInstagram_stub
FBMessenger_stub
FidoUafClient
FilterManager
FlipboardBriefing_Grace
Foundation
GalaxyAppsWidget_Phone_Grace
GearManagerStub
Gmail2
GoogleTTS
Hangouts
HighlightPlayer_Grace
Hs20Provider
ImsTelephonyService
IWlanContentProvider
Kies
MapconContentProvider
Maps
MhdrService
minimode-res
MobilePrintSvc_Samsung-res
MobileTrackerEngineTwo
NaverV
PartnerBookmarksProvider
PENUP
Personalization
PhotoTable
PopupuiReceiver_M
Preconfig
PreloadInstaller
RoseEUKor
SamsungDLPService
SapaAudioConnectionService
SapaMonitor
SCPMClient
SecFactoryPhoneTest
SecurityManagerService
SecurityProviderSEC
ShareLink
SilentLog
SLocation
SmartcardService
SmartRemote_T
SmartSwitchAgent
SnsImageCache
SPrintSpooler6
STalkback
SysScope
TuiService
UniversalSwitch
WebManual
WfdBroker
withTV
WlanTest
YouTube
system/priv-app:
AccessControl_M
AirReadingGlass
AuthService
AutomationTest_FB
AutoPreconfig
CallLogBackup
CarrierConfig
DCMService
DeviceKeystring
DeviceTest
FaceService
FBInstaller_NS
FidoUafAsm
Fmm
GalaxyLabs
Gear360Editor_WQHD_Grace
GearManager
GoogleFeedback
HwModuleTest
intelligenceservice2
IPService
IrisUserTest
KeyguardWallpaperUpdator
MyPlaces_Hero
NSFusedLocation_Global
OMCAgent
OPEN_IMS_DM
PassService
PhoneErrService
ringtoneBR
Rlc
RNB
RNBShell
SamsungBilling
SecLiveWallpapersPicker
SEMFactoryApp
SKMSAgent
SmartcardManager
SNS_v2
SOAgent
SPDClient
StatementService
SVoiceLang_EnglishPack_GB_1.0
SVoiceLang_EnglishPack_US_1.0
SVoiceLang_FrenchPack_1.0
SVoiceLang_GermanPack_DE_1.0
SVoiceLang_ItalianPack_IT_1.0
SVoiceLang_RussianPack_RU_1.0
SVoiceLang_SpanishPack_ES_1.0
UcsPinpad
UIBCVirtualSoftkey
Velvet
VirtualTourViewer_WQHD_Hero
VRSetupWizardStub
wssyncmlnps2
hope dn5 note 4 fan catch this
send from tapatalk......note 10.1(n8000)...note 2(n7100)....note 4(n910c)
ghostryder kelate said:
DN5 NOTE 4 V0.4 - V0.41 ALL GUIDES...DOWNLOAD LINKS, ADD ON AND MINOR FIXES BY ALL INVOLVED DEVELOPER AND MEMBERS....ALL IN 1 PLACE
how to
1. Using twrp recovery
2. Wipe everything(clean install)
3. Flash dn5 v0.4 (dont restart)
4. Wipe dalvik/Cache (dont restart)
5. Flash suemax kernel lite 1.1 stable for 910c*(dont restart)
6. Wipe dalvik / cache (dont restart)
7. Flash edge+people & glow
8. Wipe dalvik/cache
9. Restart
10. using twrp recovery
11. Flash dn5 v0.41(update)
12. Restart( you are done here if you dont need exposed)
13. install xposed v3.0 alpha4 apk
14. using twrp recovery
15. flash xposed framework( xposed-v74-sdk22)
16. Restart enjoy
17. for skip music player bug please open developers in seting and disable "Use AwesomePlayer"
18. enjoy
all download link
dn5 note 4 v0.4:
https://mega.nz/#!2UlxTIga!jokB5VtMfmjuppQ2Q0uXJHHyAgJOG_ByQCZudbm3OlQ
suemax kernal n910c :
https://www.dropbox.com/s/l12qscglxjfzigs/Suemax-kernel_N910U_Stock_5.1.1_Autoroot_v.1.1.zip?dl=0
synapse app(control kernal)
set GPU gavenor from interactive to default :
https://play.google.com/store/apps/details?id=com.af.synapse
edge plus+glow :
https://mega.nz/#!N5xUGS5I!u9-G1z7R_81akI70x8MNVo4Q_esqABm0fKoju7ALCC0
dn5 note 4 v0.41(update) :
https://mega.nz/#!vBUFlaDJ!nAyW9-YiD7gj5Qt7nnDDWyN_Ms56bzJwfN2gv9dLwMA
xposed :
1) xposed v3.0 alpha4 apk :
http://dl-1.va.us.xda-developers.co....zip?key=9VT7MqiZzhv0El844sY4aQ&ts=1447592330
xposed framework :
http://forum.xda-developers.com/attachment.php?attachmentid=3481793&d=1442874989
add on for those who like to use note stock camera over note 5 camera Here is the zip for the stock Note 4 Camera*
https://mega.nz/#!QZh0iZja!Cod_Bz6hm...pSHwTUm2HEa4hI
1. Install the zip from recovery
2. Reboot then wipe data of Camera and Gallery
3. Install App Settings module in Xposed and set 640 DPI for the camera
4. Reboot and enjoy*
i just collect and share all these in 1 place to make easier for member to install and download this rom....non of these are mine....all the involved developers and members should get the credit
releted to original thread
http://forum.xda-developers.com/note-4/development/5-0-1-dn-rom-e-team-t3031712
Click to expand...
Click to collapse
I already flashed dn5 0.4.1. Is it still okay to flash the edge glow? And is it okay to installxposed using twrp recovery? I saw on other thread that I need to use CWM
---------- Post added at 05:53 AM ---------- Previous post was at 05:27 AM ----------
Maybe you know what are the apps that are safe to freeze using titanium backup? Thank you!
1) yes it is safe to install xposed on this rom that i linked above...first install xposed v3.0 alpha4 apk and reboot twrp and install xposed framework
2) u can install edge glow as long u are on suemax kernal
send from tapatalk......note 10.1(n8000)...note 2(n7100)....note 4(n910c)
for information this thread now is moved to note 4 Q&A
send from tapatalk......note 10.1(n8000)...note 2(n7100)....note 4(n910c)
Good thread one place for all minor fixes. note 4 camera without dpi link is dead.
You can also add 6 icon dock and animated notification toggles links.
Sir kindly update the link for xposed. Thanks Or anyone can share a working xposed?
Sent from my SM-N920C using Tapatalk
Ok updated
Is there anything new on Edge Glow feature because last time on v0.4.1
I flashed it & make no use of it because it only works when phone is face down.
Any thing new now ?
usmann_090 said:
Is there anything new on Edge Glow feature because last time on v0.4.1
I flashed it & make no use of it because it only works when phone is face down.
Any thing new now ?
Click to expand...
Click to collapse
Still same
ghostryder kelate said:
Still same
Click to expand...
Click to collapse
& about the Kernel
I have used Suemax Kernel for Glow Edge Feature but it gives me less benchmark as compared to stock kernel of Electron Team.
I know the kernel is better but I don't know why it doesn't perform better on my device
usmann_090 said:
& about the Kernel
I have used Suemax Kernel for Glow Edge Feature but it gives me less benchmark as compared to stock kernel of Electron Team.
I know the kernel is better but I don't know why it doesn't perform better on my device
Click to expand...
Click to collapse
Try disabling or enabling DVFS in wanam Xposed.
Enviado desde mi Telefono
Juste300 said:
Try disabling or enabling DVFS in wanam Xposed.
Enviado desde mi Telefono
Click to expand...
Click to collapse
I have not installed xposed.
Now I m gonna flash DN5 v5
So should I use stock kernel or suemax ?
Any recommendations. Thank you
usmann_090 said:
I have not installed xposed.
Now I m gonna flash DN5 v5
So should I use stock kernel or suemax ?
Any recommendations. Thank you
Click to expand...
Click to collapse
1)Stock eteam kernal - stable
2) Suemax kernal - custom kernel can provide improvements, extra features, specialization, and extreme configurability.
Developers can even add some additional features from other kernels that don’t officially exist for your device.
You can control the minimum and maximum frequencies that the CPU can scale up or down to, You can configure the I/O scheduler that is used and lots of other stuff.
Its all up to you:what:
ghostryder kelate said:
1)Stock eteam kernal - stable
2) Suemax kernal - custom kernel can provide improvements, extra features, specialization, and extreme configurability.
Developers can even add some additional features from other kernels that don’t officially exist for your device.
You can control the minimum and maximum frequencies that the CPU can scale up or down to, You can configure the I/O scheduler that is used and lots of other stuff.
Its all up to you:what:
Click to expand...
Click to collapse
Thank you.
Yeah.I have already used suemax kernel.
But I dont know much about how to control all features using synapse.
Is there any guide ?
usmann_090 said:
Thank you.
Yeah.I have already used suemax kernel.
But I dont know much about how to control all features using synapse.
Is there any guide ?
Click to expand...
Click to collapse
I never yet try tweaking kernal on suemax kernal...but i can give a example what done on my note 2 n7100 using agni kernal
Device stock dn4 note 2
- Cpu 1.6ghz(1600mhz) x 4 core
Agni kernal tweak
- 1.8ghz(1800mhz)
- cpu voltage -20mv
- volume +65
You need to google it
I more i dont remember
ghostryder kelate said:
I never yet try tweaking kernal on suemax kernal...but i can give a example what done on my note 2 n7100 using agni kernal
Device stock dn4 note 2
- Cpu 1.6ghz(1600mhz) x 4 core
Agni kernal tweak
- 1.8ghz(1800mhz)
- cpu voltage -20mv
- volume +65
You need to google it
I more i dont remember
Click to expand...
Click to collapse
Sir...
Note 2 vs Note 4 is completely different devices ok. So if your unsure about any info don't recommend it ok. Thx
If I find any info to help others with set-up I'll post it.
Bajanman said:
Sir...
Note 2 vs Note 4 is completely different devices ok. So if your unsure about any info don't recommend it ok. Thx
If I find any info to help others with set-up I'll post it.
Click to expand...
Click to collapse
I did not even use the word recommend...that was only a example...and i did say google it
I tried PM ing you but since you disabled it I have to write here. I would appreciate if you didn't post direct download links to my work. Please change them back to link to my posts (PDF export and Scroll Capture fixes) so that people can see who the work is coming from and maybe thank the proper person. Thank you.
ozkaya said:
I tried PM ing you but since you disabled it I have to write here. I would appreciate if you didn't post direct download links to my work. Please change them back to link to my posts (PDF export and Scroll Capture fixes) so that people can see who the work is coming from and maybe thank the proper person. Thank you.
Click to expand...
Click to collapse
@ozkaya
I removed your direct link from the op, and redirected them back to your post ok.
Which is how it should be done for all links posted by other members.
Thanks
Bajanman
How To Install Flyme OS 6.1.0.0G Global Stable on Chinese Pro 6 Plus devices
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a Guide to install the Global ROM Flyme OS 6Global on the Meizu Pro 6 Plus Chinese version.
Note: This is also a way to install Any custom ROM made in the future. If someone wanna Customize the ROM( Integrate Xposed and other stuff) feell free to do it.
What does this mean:
Meizu released two versions of the Pro 6 Plus, a chineese version (A) for china and an International version (G) for the devices sold in other countries (International). If you bought your Pro 6 plus from official meizu store on your country, it will come with the G version, but if you bought it from Aliexpress or any other Chinese store, you will buy a Chinese version, some seller may send you the international version if you are lucky but the majoritynot.
Global / International version:
No bloatware, chinese apps..
Multilanguage ( all languages available)
Stock apps optimized for International use (Weather....)
seems to be smoother and faster than the chinese version.
Disclaimer
*** As always - Read everything carefully and Flash on our own risk! ***
I can and will not take any responsibility for bricked phones or lost data.What do we need:
Rooted Device
FlashFire app from playstore
Flyme 6.1.0.0G _Global_Stable_Pro 6 Plus for Flashfire
Instructions:
Its recomnended to back up your data (Titanium backup, your fotos etc)in case of disaster.
Update to a newer version:
Copy the new version to Internal storage
Open Flashfire, click on the + button and choose Flash Zip / OTA
Select the Downloaded ROM from the file explorer and select Mount system read write.
Now you will see a screen with all the actions that will be done, select the action called Reboot and un-thick the option Preserve recovery, leave Normal selected.
Finally click on FLASH and wait until the process ends.
Enjoy...
Note: In case of any problems and you want a clean installation, add the wipe action from the + button before flashing. But it should not be needed.
Note: it seems to be a problem with supersu if you don't wipe data before update. so to avoid problems, you should wipe before flash.
If you want to keep your apps and data, you should make a data (data partition only) backup from flashfire before updating. then wipe and update, follow instructions to root and to have super su. After that you can use flshfire to restore data backup (only data partition) .
also you can use kingroot but its not compatible with flashfire.
If you already updated, you can use titanium backup(give root permision from system root in settings, security root permissions)make a backup of your apps and then follow the guide below How to go back to stock chinese ROM in case of disaster, after that follow the instruction of new installation and when you have the that done, you can rstore your apps with titanium backup.
[/LIST]
First Time Installation:
Root:
Go to Meizu page and create and account. Enter a valid email as its needed to activate the account. if you already have an account, just skip this step.
Now go to Settings on your device and Select Meizu account, Log in with your new created account.
Go back and select Fingerprint & security , then select Root permission, scroll down and confirm. The device will reboot. Now its rooted but i recommend installing supersu because the built int root some times has failed for me.
Install SuperSu from playstore, open it and select Update su binary, choose Normal. wait until it finishes and reboot.
Now you have Root
Note: if you dont have Google Playstore, open meizu app store and search for supersu.
Install ROM:
Root your device
Install Flashfire from Playstore
Download This modified Flyme 6.1.0.0G _Global_Stable_Pro 6 Plus for Flashfire
[*]Copy the downloaded ROM to Internal storage
[*]Open Flashfire, give root permissions and click on the + button,
[*]Select Wipe and then ok
[*]Click again on the + button and choose Flash Zip / OTA
[*]Select the Downloaded ROM from the file explorer and select Mount system read write. See these screens for more information:
[*]Now you will see a screen with all the actions that will be done, select the action called Reboot and unthick the option Preserve recovery, leave Normal selected.
[*]Finally click on FLASH and wait until the process ends.
[*]Enjoy...
Optional:
You can Install gapps from flashfire along with the rom, just select Flash zip/ota and select Gapps zip, this way it will be installed after rom. Or you can use Google Installer which you can find in meizu appstore after reboot.
Note: For future updates, do not update the device from the Updates app included as it will donload the Gobal version of Flyme but it will fail because your device is still a chinese version.
How to go back to stock chinese ROM in case of disaster:
Download the latest version of chinese Flyme from: [url]http://www.flyme.cn/firmwarelist-101.html#3
Turn off the device （hold power button until it turns off.
Hold Volume + button and power button at the same time until the phone vibrates. it will enter recovery mode.
Connect your device to your PC by usb, you will have access to a folder named Recovery. Copy the update.zip to this folder and wait for it to finish.
Go back to the device and select the options Upgrade System and Clear data.
Hit Start and wait until it finishes.
Older Versions:
Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus for Flashfire
Thanks for this tutorial! It was very detailed and easy to follow.
In the future when I want to perform an update, do I need to go through FlashFire in order for it to work correctly on a Chinese version of the device? Also, where do you download the "G" versions of the beta firmware? I know their next release is a stable version and I know it comes out after the A version; just wondering where you go to download it. Cheers!
ShaolinMilk said:
Thanks for this tutorial! It was very detailed and easy to follow.
In the future when I want to perform an update, do I need to go through FlashFire in order for it to work correctly on a Chinese version of the device? Also, where do you download the "G" versions of the beta firmware? I know their next release is a stable version and I know it comes out after the A version; just wondering where you go to download it. Cheers!
Click to expand...
Click to collapse
For future update you can download the stable from http://www.flymeos.com/firmwarelist?modelId=46&type=1. Or the betas from flyme forum. You will have to edit the installation script to be able to flash through flashfire and don't get error and avoid firmware problems. Anyway i will upload the future updates modified for flashfire.
bihariel said:
For future update you can download the stable from http://www.flymeos.com/firmwarelist?modelId=46&type=1. Or the betas from flyme forum. You will have to edit the installation script to be able to flash through flashfire and don't get error and avoid firmware problems. Anyway i will upload the future updates modified for flashfire.
Click to expand...
Click to collapse
Thanks!!! I tried looking through the zip file to see what you changed, but didn't know which file to go into. I assume it's not as easy as opening up a file in notepad and changing some data on there.
ShaolinMilk said:
Thanks!!! I tried looking through the zip file to see what you changed, but didn't know which file to go into. I assume it's not as easy as opening up a file in notepad and changing some data on there.
Click to expand...
Click to collapse
Its not hard to do but yes, i you dont know what are you doing is dangerous. Dont worry i will upload future updates.
bihariel said:
Its not hard to do but yes, i you dont know what are you doing is dangerous. Dont worry i will upload future updates.
Click to expand...
Click to collapse
Thanks dude! Looking forward to it.
im surprised at how small the response to this phone is....just stumbled upon it while looking for a new device.
this is rather off-topic but this seems to be the most active thread
thanks for that.
i have question,i can flash the Flyme 5.2.7.0G by this method?
@bihariel Hey I have a question for you. Have you ever experienced a sudden change in battery life out of nowhere? When I first installed this firmware, the battery was perfect. All of a sudden after charging my phone, the battery is draining at an unprecedented rate especially on standby. I charged the phone to 100%, disabled all notification/wifi/cellular network and left it on overnight to activate the battery calibration. The problem still exists however. It's draining about 1% every 2 minutes on standby which is ridiculous.
I'm just wondering if you ever encountered this issue before.
Sent from my PRO 6 Plus using XDA-Developers Legacy app
mr.mgmg said:
thanks for that.
i have question,i can flash the Flyme 5.2.7.0G by this method?
Click to expand...
Click to collapse
You can but you have to modify the script to avoid firmware files and recovery.img to be flashed, which would end in an installation abort,
ShaolinMilk said:
@bihariel Hey I have a question for you. Have you ever experienced a sudden change in battery life out of nowhere? When I first installed this firmware, the battery was perfect. All of a sudden after charging my phone, the battery is draining at an unprecedented rate especially on standby. I charged the phone to 100%, disabled all notification/wifi/cellular network and left it on overnight to activate the battery calibration. The problem still exists however. It's draining about 1% every 2 minutes on standby which is ridiculous.
I'm just wondering if you ever encountered this issue before.
Sent from my PRO 6 Plus using XDA-Developers Legacy app
Click to expand...
Click to collapse
Not really, the battery is surprising me on this ROM. Maybe you sould use a battery monitoring app and see whats draining it. If not, do a factory reset and see if it still prsists.
bihariel said:
You can but you have to modify the script to avoid firmware files and recovery.img to be flashed, which would end in an installation abort,
Click to expand...
Click to collapse
so,how we can do that?
i think the 6.7.4.11_beta_Global no stable yet
u can edit the Flyme 5.2.7.0G?
bihariel said:
How To Install Flyme OS 6.7.4.11 Global on Chinese Pro 6 Plus
This is a Guide to install the Global ROM Flyme OS 6.7.4.11 on the Meizu Pro 6 Plus Chinese version.
Note: This is also a way to install Any custom ROM made in the future. If someone wanna Customize the ROM( Integrate Xposed and other stuff) feell free to do it.
What does this mean:
Meizu released two versions of the Pro 6 Plus, a chineese version (A) for china and an International version (G) for the devices sold in other countries (International). If you bought your Pro 6 plus from official meizu store on your country, it will come with the G version, but if you bought it from Aliexpress or any other Chinese store, you will buy a Chinese version, some seller may send you the international version if you are lucky but the majoritynot.
Global / International version:
No bloatware, chinese apps..
Multilanguage ( all languages available)
Stock apps optimized for International use (Weather....)
seems to be smoother and faster than the chinese version.
Disclaimer
*** As always - Read everything carefully and Flash on our own risk! ***
I can and will not take any responsibility for bricked phones or lost data.What do we need:
Rooted Device
FlashFire app from playstore
Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus for Flashfire
Instructions:
Its recomnended to back up your data (Titanium backup, your fotos etc)in case of disaster.
Root:
Go to Meizu page and create and account. Enter a valid email as its needed to activate the account. if you already have an account, just skip this step.
Now go to Settings on your device and Select Meizu account, Log in with your new created account.
Go back and select Fingerprint & security , then select Root permission, scroll down and confirm. The device will reboot. Now its rooted but i recommend installing supersu because the built int root some times has failed for me.
Install SuperSu from playstore, open it and select Update su binary, choose Normal. wait until it finishes and reboot.
Now you have Root
Note: if you dont have Google Playstore, open meizu app store and search for supersu.
Install ROM:
Root your device
Install Flashfire from Playstore
Download This modified Flyme OS 6.7.4.11_beta_Global_Pro 6 Plus
Copy the downloaded ROM to Internal storage
Open Flashfire, give root permissions and click on the + button,
Select Wipe and then ok
Click again on the + button and choose Flash Zip / OTA
Select the Downloaded ROM from the file explorer and select Mount system read write. See these screens for more information:
Now you will see a screen with all the actions that will be done, select the action called Reboot and unthick the option Preserve recovery, leave Normal selected.
Finally click on FLASH and wait until the process ends.
Enjoy...
Optional:
You can Install gapps from flashfire along with the rom, just select Flash zip/ota and select Gapps zip, this way it will be installed after rom. Or you can use Google Installer which you can find in meizu appstore after reboot.
Note: For future updates, do not update the device from the Updates app included as it will donload the Gobal version of Flyme but it will fail because your device is still a chinese version.
How to go back to stock chinese ROM in case of disaster:
Download the latest version of chinese Flyme from: http://www.flyme.cn/firmwarelist-101.html#3
Turn off the device （hold power button until it turns off.
Hold Volume + button and power button at the same time until the phone vibrates. it will enter recovery mode.
Connect your device to your PC by usb, you will have access to a folder named Recovery. Copy the update.zip to this folder and wait for it to finish.
Go back to the device and select the options Upgrade System and Clear data.
Hit Start and wait until it finishes.
Click to expand...
Click to collapse
Hello everyone, thanks a lot bihariel for this guide.
I have successfully installed the beta with flashfire and it's all ok!
Some people say flashfy is not a very safe method, what do you think? I'm not an expert.
However, I did not go to the flymex account synchronization, now I've installed the closed beta apps yesterday and it works perfectly well!
We wait for the stable then!
Can you explain how you modified the update for the future? Thanks so much.
Are Alternative Methods to Flashfire? Type ADB?
In Italy a seller on his blog posted this guide, but I could not install it:
"The tutorial for installing firmware G in the Asian Meizu Pro 6 Plus smartphone is really very simple and does not require solid modding basics, you just have to be careful about installing ADB drivers correctly.
Load the battery completely before you begin the procedure and save all your important data
On your PC or on a Cloud as you will need to make the full factory reset.
Prerequisites Preinstalling Firmware G in Meizu Pro 6 Plus:
1-Smartphone fully charged
2-Any antivirus and / or firewalls disabled
3-Driver ADB properly installed, restart your PC after installation!
4-Enabled Root permissions through Flyme account (Fingerprint and Security Menu)
5-USB Debug Mode Enabled in Developer Options (Accessibility Menu)
G Firmware Installation in Meizu Pro 6 Plus:
Decompress the Meizu_Pro6plus_Flyme 5.2.7.0G.zip archive and copy it to the root folder
Of Meizu Pro 6 Plus the file system-i.img
Decompress the archive adb_tool.zip and in the folder obtained we select the file
Cmd.exe to open the command window
Write in the command window:
Adb shell
We give Send and permission to ADB through the pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the shell @ Pro6Plus command window
WARNING: If the pop-up display does not appear, ADB drivers have not been installed correctly!
Write in the command window:
su
We give Send and permission of ADB SHELL root permissions through
The pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the command window the symbol #
WARNING: If the pop-up display does not appear, root permissions are disabled!
Write in the command window:
Dd if = / sdcard / system-i.img of / dev / block / platform / 155a0000.ufs / by-name / system
We give Enter, we will see the cursor blink, we do not touch anything until the flash procedure
The system will not be completed and the screenshot message below will appear
Meizu pro 6 plus 01
Disconnect the usb cable from the Meizu Pro 6 Plus and restart it by holding down the button
Power for a few seconds, the startup process will take a few minutes, do not alarm and we start booting.
When the terminal is started we go in
Settings> About phone> Storage> Factory data reset>
We see Factory reset and Format internal storage>
Select START RESET"
I put into google translate, if you want the original in italian language let me know.
mr.mgmg said:
so,how we can do that?
i think the 6.7.4.11_beta_Global no stable yet
u can edit the Flyme 5.2.7.0G?
Click to expand...
Click to collapse
I read in some chinese forum that we cant downgrade but...
Download the ROM 5.2.7.0G, open the zip and editthis file \META-INF\com\google\android\updater-script
You can use this picture as a guide, delete the red lines:
Tony72 said:
Hello everyone, thanks a lot bihariel for this guide.
I have successfully installed the beta with flashfire and it's all ok!
Some people say flashfy is not a very safe method, what do you think? I'm not an expert.
However, I did not go to the flymex account synchronization, now I've installed the closed beta apps yesterday and it works perfectly well!
We wait for the stable then!
Can you explain how you modified the update for the future? Thanks so much.
Are Alternative Methods to Flashfire? Type ADB?
In Italy a seller on his blog posted this guide, but I could not install it:
"The tutorial for installing firmware G in the Asian Meizu Pro 6 Plus smartphone is really very simple and does not require solid modding basics, you just have to be careful about installing ADB drivers correctly.
Load the battery completely before you begin the procedure and save all your important data
On your PC or on a Cloud as you will need to make the full factory reset.
Prerequisites Preinstalling Firmware G in Meizu Pro 6 Plus:
1-Smartphone fully charged
2-Any antivirus and / or firewalls disabled
3-Driver ADB properly installed, restart your PC after installation!
4-Enabled Root permissions through Flyme account (Fingerprint and Security Menu)
5-USB Debug Mode Enabled in Developer Options (Accessibility Menu)
G Firmware Installation in Meizu Pro 6 Plus:
Decompress the Meizu_Pro6plus_Flyme 5.2.7.0G.zip archive and copy it to the root folder
Of Meizu Pro 6 Plus the file system-i.img
Decompress the archive adb_tool.zip and in the folder obtained we select the file
Cmd.exe to open the command window
Write in the command window:
Adb shell
We give Send and permission to ADB through the pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the shell @ Pro6Plus command window
WARNING: If the pop-up display does not appear, ADB drivers have not been installed correctly!
Write in the command window:
su
We give Send and permission of ADB SHELL root permissions through
The pop-up that will appear on the Meizu Pro 6 Plus display
We will read in the command window the symbol #
WARNING: If the pop-up display does not appear, root permissions are disabled!
Write in the command window:
Dd if = / sdcard / system-i.img of / dev / block / platform / 155a0000.ufs / by-name / system
We give Enter, we will see the cursor blink, we do not touch anything until the flash procedure
The system will not be completed and the screenshot message below will appear
Meizu pro 6 plus 01
Disconnect the usb cable from the Meizu Pro 6 Plus and restart it by holding down the button
Power for a few seconds, the startup process will take a few minutes, do not alarm and we start booting.
When the terminal is started we go in
Settings> About phone> Storage> Factory data reset>
We see Factory reset and Format internal storage>
Select START RESET"
I put into google translate, if you want the original in italian language let me know.
Click to expand...
Click to collapse
I can tell you that for now the safest method is flashfire because it install the ROM in same way that the Recovery does, that is: it wipes the system partition and installs the ROM with correct permissions.
The method you mention is more risky( to get a bootloop) because it overwrites the ROM files directly over the System partition with the OS still running on phone. This drives into a system hang freeze. of course you have to turn it of by holding power button until it restarts. Then you have to go recovery and do a factory reset if you get bootloop.
I tried this method before Flasfire but it gave me bootloop so then i used Flashfire because it do the same job that Recovery does.
About the modifications, its really simple. Just open \META-INF\com\google\androidupdater-script and delete all the lines in red in this picture (these lines check if your phone is Chinese version or global and update the firmware files.)
Also you can delete the files related to those lines just for safety (boot.img, recovery.img, logo.bin, ldfw, bootloader..)
bihariel said:
I can tell you that for now the safest method is flashfire because it install the ROM in same way that the Recovery does, that is: it wipes the system partition and installs the ROM with correct permissions.
The method you mention is more risky( to get a bootloop) because it overwrites the ROM files directly over the System partition with the OS still running on phone. This drives into a system hang freeze. of course you have to turn it of by holding power button until it restarts. Then you have to go recovery and do a factory reset if you get bootloop.
I tried this method before Flasfire but it gave me bootloop so then i used Flashfire because it do the same job that Recovery does.
About the modifications, its really simple. Just open \META-INF\com\google\androidupdater-script and delete all the lines in red in this picture (these lines check if your phone is Chinese version or global and update the firmware files.)
Also you can delete the files related to those lines just for safety (boot.img, recovery.img, logo.bin, ldfw, bootloader..)
Click to expand...
Click to collapse
Thanks a lot!, I'll read all as soon I could
BE Careful
Removed
bihariel said:
I read in some chinese forum that we cant downgrade but...
Download the ROM 5.2.7.0G, open the zip and editthis file \META-INF\com\google\android\updater-script
You can use this picture as a guide, delete the red lines:
Click to expand...
Click to collapse
i flashed the 6.7.4.11 but i have problem when i open the front camrera and close the camrea not open again
now i want back to the 5.2.7.0G but when i want edit the script is Different about your picture.
u can edit the just script and upload and then i will add to zip
mr.mgmg said:
i flashed the 6.7.4.11 but i have problem when i open the front camrera and close the camrea not open again
now i want back to the 5.2.7.0G but when i want edit the script is Different about your picture.
u can edit the just script and upload and then i will add to zip
Click to expand...
Click to collapse
Salam,
The camera bug is weird, i don't have that bug, i open the camera ( front and back) many times and it works perfectly, maybe you changed something in camera setting ( erasing camera app data should help)
Anyway, the script is exactly the same as mine, its just you are using and editor with Arabic orientation.
Just use the app Notepad++( google it) and open it in English lang.
If not, just upload the script for me and i will edit it.
bihariel said:
Salam,
The camera bug is weird, i don't have that bug, i open the camera ( front and back) many times and it works perfectly, maybe you changed something in camera setting ( erasing camera app data should help)
Anyway, the script is exactly the same as mine, its just you are using and editor with Arabic orientation.
Just use the app Notepad++( google it) and open it in English lang.
If not, just upload the script for me and i will edit it.
Click to expand...
Click to collapse
ealaykum alssalam
thanks bro for help
i flashed the rom without change anything in script and its work
u know when the stable rom will out?
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab 2 (7 or 10") from Stock to Android 8.1
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab 2 Unified (7 or 10", espressowifi/3g) Stock to Android 8.1 Oreo / Unlegacy Android
This detailed step-by-step guide helps you transform your Samsung Galaxy Tab 2 to a newer one with Android 8.1.
Make sure your tablet is fine before going further: in Android, go to Settings > About device > Model number is listed below.
- espressowifi
- GT-P3110 (7", Wi-Fi)
- GT-P3113 (7", Wi-Fi)
- GT-P5110 (10.1", Wi-Fi)
- GT-P5113 (10.1", Wi-Fi)
- espresso3g
- GT-P3100 (7", 3G)
- GT-P5100 (10.1", 3G)
If not, quit this tutorial.
Disney+ and Netflix are working.
CHANGELOG
v1. Initial release for Android 8.1
1) DOWNLOAD
- djibe Galaxy Tab 2 pack: https://bit.ly/djibe-galaxytab2-pack
(contains Samsung tweaked Odin 3.13.1 + Samsung USB drivers + TWRP 3.4.0-0 official recovery + Magisk Root + Aurora Store). Unzip files.
+ ROM Android 8.1 Unlegacy Android: https://forum.xda-developers.com/t/rom-aosp-8-1-oreo-unlegacy-android-unofficial.4323203/
Download latest Wi-Fi build here: https://forum.xda-developers.com/attachments/ua_espresso-8-1-0-20211021-surefixed-zip.5438769/
Download latest 3G build here: https://androidfilehost.com/?fid=7161016148664826463
### GPS and Camera don't work. Use an Android 7.1 ROM if you need these
+ BitGApps Package ARM 8.1 (R44+): https://forum.xda-developers.com/t/custom-gapps-bitgapps-for-android.4012165/post-81060605
Download latest build: https://github.com/BiTGApps/BiTGApps-Release/releases
+ a microSD card. Copy ROM, Gapps, Magisk root and Aurora Store on microSD card (FAT32 format) and insert it in phone.
+ Charge phone to 100%
2) BACKUP DATA
Install Samsung drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use app like Backupyourmobile and SMS backup & Restore to backup contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
Now connect to Wi-Fi, Settings > About device > Software update. Check you already have the latest.
3) FLASH TWRP 3.4 RECOVERY
Shut down tablet.
Boot in Download Mode: hold Power + Volume- until you see Warning's screen and release all buttons.
Confirm access to Download mode by pressing Volume+.
Connect tablet in USB, wait during bootloader drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In Files > PDA > select twrp-3.4.0-0-espressowifi.img.tar
### or twrp-3.4.0-0-espresso3g.img.tar for 3G model.
### Warranty will be Void after next click ###
Click Start.
When Success green message appears, unplug USB.
Now hold Power + Volume+ until Samsung logo shows up and release buttons.
### If tablet reboots normally, recovery will be reset. You can flash TWRP with Odin again.
4) BACKUP SYSTEM (Nandroid backup)
Wait a few seconds for TWRP recovery to boot.
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Backup > you can select the partitions you want to save.
I prefer to backup System, EFS and Boot.
Now type Select Storage > Select Micro SD card and confirm with OK
Now Swipe to Backup and wait during process.
Go to Home screen and continue with next chapter.
5) FORMAT PARTITIONS
Go to Wipe > Format Data
Type yes and confirm with bottom right icon.
Go to Home > Reboot > Recovery > Do not install app.
Back to TWRP, go to Wipe > Advanced wipe,
select Dalvik, System, Data, Internal Storage (if you really made a backup from step 2), Cache, then Swipe to Wipe,
then back.
### Don't select microSD or you will lose your backup
Go to Home > Reboot > Recovery > Do not install app.
6) FLASH ROM, GAPPS
Go to Install > choose ua_expresso*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active).
then Add more Zips > bitgapps*.zip
then Swipe to confirm Flash.
Wait for operation to end.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System.
Wait for the phone to boot during 5 minutes.
### Don't connect to your Google account before setting up root.
7) IMPROVE
Go to Settings > System > About tablet
### Wi-Fi users, don't be scared, Galaxy Tab 2 3G is written, not a big deal.
Tap on the "Build number" entry seven times. You are notified that developer settings are now active.
Go to Settings > System > Developer options,
Set Windows animation to 0, Transition animation and transition scales to x 0,5.
If Netflix or Disney+ are not accessible from the Play Store, use Aurora Store.
8) STORE YOUR BACKUP IN A SAFE PLACE
Connect phone or microSD to PC.
Open microSD folder and backup TWRP folder to a safe place.
Enjoy,
djibe
Thanks: @Mighty, @LR7875, LOS Team, TWRP Team, BitGapps team, topjohnwu
Hi, there doesn't seem to be anything named Magisk Root within the download zip. Is it missing or am I missing something?
iCasseus said:
Hi, there doesn't seem to be anything named Magisk Root within the download zip. Is it missing or am I missing something?
Click to expand...
Click to collapse
Hi,true and sorry for that
You can download it here: https://github.com/topjohnwu/Magisk/releases
djibe89 said:
Hi,true and sorry for that
You can download it here: https://github.com/topjohnwu/Magisk/releases
Click to expand...
Click to collapse
Thanks. What do you do with Magisk after copying it to the external memory as it isn't mentioned in any other steps?
I have managed to follow all other steps and have it running with android 8.1 however Disney+ and Netflix do not work as I believe they see the tablet as rooted and don't like it. I have tried a few Disney+ install work arounds but still doesn't work. Do you have any ideas? Cheers
djibe89 said:
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab 2 (7 or 10") from Stock to Android 8.1
[GUIDE/TUTORIAL/HOWTO] Samsung Galaxy Tab 2 Unified (7 or 10", espressowifi/3g) Stock to Android 8.1 Oreo / Unlegacy Android
This detailed step-by-step guide helps you transform your Samsung Galaxy Tab 2 to a newer one with Android 8.1.
Make sure your tablet is fine before going further: in Android, go to Settings > About device > Model number is listed below.
- espressowifi
- GT-P3110 (7", Wi-Fi)
- GT-P3113 (7", Wi-Fi)
- GT-P5110 (10.1", Wi-Fi)
- GT-P5113 (10.1", Wi-Fi)
- espresso3g
- GT-P3100 (7", 3G)
- GT-P5100 (10.1", 3G)
If not, quit this tutorial.
Disney+ and Netflix are working.
CHANGELOG
v1. Initial release for Android 8.1
1) DOWNLOAD
- djibe Galaxy Tab 2 pack: https://bit.ly/djibe-galaxytab2-pack
(contains Samsung tweaked Odin 3.13.1 + Samsung USB drivers + TWRP 3.4.0-0 official recovery + Magisk Root + Aurora Store). Unzip files.
+ ROM Android 8.1 Unlegacy Android: https://forum.xda-developers.com/t/rom-aosp-8-1-oreo-unlegacy-android-unofficial.4323203/
Download latest Wi-Fi build here: https://forum.xda-developers.com/attachments/ua_espresso-8-1-0-20211021-surefixed-zip.5438769/
Download latest 3G build here: https://androidfilehost.com/?fid=7161016148664826463
### GPS and Camera don't work. Use an Android 7.1 ROM if you need these
+ BitGApps Package ARM 8.1 (R44+): https://forum.xda-developers.com/t/custom-gapps-bitgapps-for-android.4012165/post-81060605
Download latest build: https://github.com/BiTGApps/BiTGApps-Release/releases
+ a microSD card. Copy ROM, Gapps, Magisk root and Aurora Store on microSD card (FAT32 format) and insert it in phone.
+ Charge phone to 100%
2) BACKUP DATA
Install Samsung drivers (you unzipped earlier).
Then plug phone to PC in File transfer mode.
Collect all .jpg or .mp4
Use app like Backupyourmobile and SMS backup & Restore to backup contacts, etc.
Check that backup is located on microSD card.
Then copy the backup on your PC.
Now connect to Wi-Fi, Settings > About device > Software update. Check you already have the latest.
3) FLASH TWRP 3.4 RECOVERY
Shut down tablet.
Boot in Download Mode: hold Power + Volume- until you see Warning's screen and release all buttons.
Confirm access to Download mode by pressing Volume+.
Connect tablet in USB, wait during bootloader drivers installation.
Then launch Odin.exe (included in my archive) and wait for Odin indicator ID:COM to become blue.
In options: Verify re-partition and Auto Reboot are NOT ticked while F. Reset Time is ticked.
In Files > PDA > select twrp-3.4.0-0-espressowifi.img.tar
### or twrp-3.4.0-0-espresso3g.img.tar for 3G model.
### Warranty will be Void after next click ###
Click Start.
When Success green message appears, unplug USB.
Now hold Power + Volume+ until Samsung logo shows up and release buttons.
### If tablet reboots normally, recovery will be reset. You can flash TWRP with Odin again.
4) BACKUP SYSTEM (Nandroid backup)
Wait a few seconds for TWRP recovery to boot.
Recovery asks for Keep System Read Only ? > Swipe to Allow Modifications.
Go to Backup > you can select the partitions you want to save.
I prefer to backup System, EFS and Boot.
Now type Select Storage > Select Micro SD card and confirm with OK
Now Swipe to Backup and wait during process.
Go to Home screen and continue with next chapter.
5) FORMAT PARTITIONS
Go to Wipe > Format Data
Type yes and confirm with bottom right icon.
Go to Home > Reboot > Recovery > Do not install app.
Back to TWRP, go to Wipe > Advanced wipe,
select Dalvik, System, Data, Internal Storage (if you really made a backup from step 2), Cache, then Swipe to Wipe,
then back.
### Don't select microSD or you will lose your backup
Go to Home > Reboot > Recovery > Do not install app.
6) FLASH ROM, GAPPS
Go to Install > choose ua_expresso*.zip,
(if you don't see the files, tap on Select Storage and make sure Micro SDCard is active).
then Add more Zips > bitgapps*.zip
then Swipe to confirm Flash.
Wait for operation to end.
Then tap Wipe cache/dalvik, swipe to confirm,
then Reboot System.
Wait for the phone to boot during 5 minutes.
### Don't connect to your Google account before setting up root.
7) IMPROVE
Go to Settings > System > About tablet
### Wi-Fi users, don't be scared, Galaxy Tab 2 3G is written, not a big deal.
Tap on the "Build number" entry seven times. You are notified that developer settings are now active.
Go to Settings > System > Developer options,
Set Windows animation to 0, Transition animation and transition scales to x 0,5.
If Netflix or Disney+ are not accessible from the Play Store, use Aurora Store.
8) STORE YOUR BACKUP IN A SAFE PLACE
Connect phone or microSD to PC.
Open microSD folder and backup TWRP folder to a safe place.
Enjoy,
djibe
Thanks: @Mighty, @LR7875, LOS Team, TWRP Team, BitGapps team, topjohnwu
Click to expand...
Click to collapse
Hi, may I ask where I can get the 7.1 ROM for my P3100?
Thank you very much! (my dad loves using old stuffs, but he wants GPS for some reasons)
Hi All,
Thanks for the tuto.
During the process, at point 6 for the zip files.
ua_expresso*.zip has been selected but i added BiTGApp 12 instead of 8.1.
ua_expresso*.zip installed but not BiTGApp.
The tablets works fine but without browser etc.
i tried to install again from Odin but it doens't come to TRW. The tablet restarts with ANDROID.
Thanks for any help,
Cheers,
bilame said:
Hi All,
Thanks for the tuto.
During the process, at point 6 for the zip files.
ua_expresso*.zip has been selected but i added BiTGApp 12 instead of 8.1.
ua_expresso*.zip installed but not BiTGApp.
The tablets works fine but without browser etc.
i tried to install again from Odin but it doens't come to TRW. The tablet restarts with ANDROID.
Thanks for any help,
Cheers,
Click to expand...
Click to collapse
Hi, can you boot with Power + Volume+ and release when Samsung logo is displayed ?
Hi djibe89,
Thanks for the quick reply.
Yes, i started with power + volume+ and it leaded to TRW.
so i installed the BiTGApp 8.1, then wiped cache/dalvik then reboot.
it didn't take 5 min but no apps has been installed unfortunately
bilame said:
Hi djibe89,
Thanks for the quick reply.
Yes, i started with power + volume+ and it leaded to TRW.
so i installed the BiTGApp 8.1, then wiped cache/dalvik then reboot.
it didn't take 5 min but no apps has been installed unfortunately
Click to expand...
Click to collapse
You can try OpenGApps then
bilame said:
Hi djibe89,
Thanks for the quick reply.
Yes, i started with power + volume+ and it leaded to TRW.
so i installed the BiTGApp 8.1, then wiped cache/dalvik then reboot.
it didn't take 5 min but no apps has been installed unfortunately
Click to expand...
Click to collapse
djibe89 said:
You can try OpenGApps then
Click to expand...
Click to collapse
or deltadroid : http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
aqt169 said:
Hi, may I ask where I can get the 7.1 ROM for my P3100?
Thank you very much! (my dad loves using old stuffs, but he wants GPS for some reasons)
Click to expand...
Click to collapse
GPS works in 8.1 rom tho
Hi,
Thanks Djibe89 and TheDoctor46.
I am wondering if files put on the sdcard from the first install could avoid right install of BiTGApp 8.1 ?
it's quite weird, i have no sound.
i could install a browser from playstore.
well, i'll try both OpenGapps and deltadroid.
bilame said:
Hi,
Thanks Djibe89 and TheDoctor46.
I am wondering if files put on the sdcard from the first install could avoid right install of BiTGApp 8.1 ?
Click to expand...
Click to collapse
Not it should not affect installation as thats what everyone does. Maybe a problem of BiTGapps?? (I have never tried them)
Hi members,
question everything works fine but i dont see playstore ore browser what did i wrong?
mp3catcher said:
Hi members,
question everything works fine but i dont see playstore ore browser what did i wrong?
Click to expand...
Click to collapse
Hi, which GApps did you flash ?
djibe89 said:
Hi, which GApps did you flash ?
Click to expand...
Click to collapse
Gapps base arm64-9.0.0 20180918 signed and bitgapps arm64-12.0.0-r45 both not working
mp3catcher said:
Gapps base arm64-9.0.0 20180918 signed and bitgapps arm64-12.0.0-r45 both not working
Click to expand...
Click to collapse
IMG-20220519-160206
Image IMG-20220519-160206 hosted in ImgBB
ibb.co
Well, Oreo is Android 8.1 so you have to download 8.1 GApps: https://github.com/BiTGApps/BiTGApp...wnload/v1.7/BiTGApps-arm-8.1.0-R45_signed.zip
Clean wipe and flash ROM + GAPPS
mp3catcher said:
Gapps base arm64-9.0.0 20180918 signed and bitgapps arm64-12.0.0-r45 both not working
Click to expand...
Click to collapse
You can't flash arm64 gapps on arm (v7) device and expect it to work.