Hi,
I have a P605 and the screen is non working because I dropped it. Now I still have an intact p600 screen where the mainboard randomly reboots. so could I use the p605 mainboard on the p600 screen?
Related
Hi there! I have a problem with the Touch screen, it's fully unresponsive.
But the problem locates in mainboard, cause when i change mainboard from the other Nexus it fully works.
It was unlocked, rooted, now it's fully stock, thanks!
Any help?
Hey a quick question- I have an AT&T note 3 and the spigen slim armor view case. Whenever i wake the phone with the cover on, it shows the normal lock screen, not the s view. This happens only after the screen has been off for a minute or two. Any help? Running a Note 4 4.4.4 port btw if that helps any. Could it be rom related?
jstar8000 said:
Hey a quick question- I have an AT&T note 3 and the spigen slim armor view case. Whenever i wake the phone with the cover on, it shows the normal lock screen, not the s view. This happens only after the screen has been off for a minute or two. Any help? Running a Note 4 4.4.4 port btw if that helps any. Could it be rom related?
Click to expand...
Click to collapse
This happened to me too with my Note 3 N9005. The problem is that new firmwares for Samsung devices don't allow cases that aren't original for that phones. You will have to change of case or buy one original if you want that your S-VIEW works again.
* Other people have the same problem. Take a look: HERE.
Hello XDA people,
The touch screen from a S4 from a friend of mine is not working. It suddenly stopt working and they tried to reboot it to see if that would help. But it didn't. The screen is not broken or anything like that. It suddenly stopt working.
I've got a S4 as well so i fitted the motherboard of my friends S4 in mine and the touch works. But when i've placed my motherboard in my friends S4 to see i've that worked but the touch screen didn't work with my motherboard in it.
Do you people of XDA maybe have a solution?
Greetings Kyrindia
Hello,
Not sure if I can ask this as I am a brand new user. I hope you can help.
Friend brought me their Galaxy S4 i337 4.4.2 stock firmware. It acts as if the very top left (or around the area) is permanently pressed not allowing for any other touch function unless I touch that area "taking over" the ghost touch. The moment I let go, it is brought back to that area of the digitizer. Sometimes it works for half a second or 2 but goes right back to the problem area soon after. I have soft reset, hard reset with no avail. I have also connected a new LCD assembly which works perfect. I am assuming after this that the digitizer is the problem though I am interested what would cause such an issue to only part of the digitizer. She did mention she is prone for dropping the phone though it had been about 24 hours after the latest drop that the digitizer started acting up and has not let up since.
Any ideas ?
Thank you and again I apologize if I am not allowed to post this here.
Tristan
Hi.
Today I bought an Galaxy Tab 4 T530 (used) with some stripes on screen (see attachment by notification area).
Wanted to know if this is a known problem to Tab 4? Could it be LCD fault or just a loose connection on ribbon cable?
Don`t know what happened that caused this.
Thank you.