Hello. Currently trying to find a solution to my faulty headphone jack on my Amazon Prime G4 Play on Verizon. The jack works in stereo if I twist it the right way, but any little bump and it either goes mono or no sound at all. Then I have to keep twisting the audio in plug to get sound again. Looked into replacing the jack but can't find just the jack, but have found the 16gb logic/motherboards on eBay. Does anyone have any advice? I can use Bluetooth but I'd rather be able to fix the issue. Are the G4 audio jacks the same? Can I use the eBay Verizon logic board? I don't want to get rid of the phone, I love this thing! Thank you. I'm out of options from googling, Amazon, YouTube, etc.
You sure its the jack and not the headset cord?
n76 said:
You sure its the jack and not the headset cord?
Click to expand...
Click to collapse
Yeah, I've tried multiple pairs of earbuds and headphones. It's definitely the jack.
Related
I'm looking for replacement for Magician's (wired) headset coz I think the one that comes with it sucks (low audio quality).
Anyone can suggest good alternatives with good MP3 quality (enough bass,...) and also as the phone's handsfree.
Thanks a lot.
If you are handy with a soldering iron, cut off that stupid pair of earbuds and solder on your favorite headset (that's what I did) or you can buy 3rd party adapters. If you solder on new headphones, don't forget to get some of that really cool heat shrink stuff to put over the wires, it turns out very professional looking and very strong.
Hmm...nice idea.
Unfortunately i'm not good at soldering.
So it seems i'm stuck with alternative to find a good earphone+hansfree combo....
SOny Ericsson p900 headset
5x times sound quality, + only one with a microphone that fits the 2.5mm plug. I searched long and hard to get this answer as i cannot solder too
this headset is not a stereo one, rigth ?
There are some adapters that have a built in mic and you plug the 3.5 headhones of your choice into it. There is also a small adapter that is just for audio 2.5-3.5. It is true that the Sony P800-900 headsets are compatible with the Jam. Unfortunately I have yet to hear original earphones that are acceptable to me. I can't remember where I bought it, but the adapter with a built-in mic and 3.5 headphone jack is probably what you are looking for. I use one in my car. Maybe somone has a link for you?
Link herehttp://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT11
Link herehttp://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT11
Click to expand...
Click to collapse
But in this case, is there any high quality 3.5mm earphone that also work as handsfree for the Jam?
This solution uses the internal mic of the PPC Phone so you can use any high quality headset from your local hi-fi store.
Can you confirm that this doesn't mess up the stereo or do anything else weird?
I found it! This is the adapter that I bought for my Sony P800 years ago(works with Magician). You can use it to plug into your home stereo, favorite headphones and it even has a volume control. Mainly I use it in my car. I use it to plug my Jam into my car stereo and sometimes I use it to plug in the earbud for one ear wired headset communication. ENJOY!
http://pc-mobile.net/sp8aa.htm
I have that. I don't like it too much since it feels very fragile (including the thin wire) and the fact that it isn't a simple straight wire means it snga everywhere.
I only use that adapter in the car. It is good for people that can't make their own headset by soldering. I made a custom headset from Koss headphones and a Sony handsfree. That baby sounds really good, and I'm picky about sound quality.
Does the mic work? Can you accept and end calls using the button?
Thanks,
K
Yes, the above adapter works exactly as the original handsfree headset (+ volume control) except that you have to plug in a normal 3.5 plug stereo headphones. If there are other models out there without the reel thingy, I haven't found it.
I recently have gone through two different Body Glove Sport Stereo headphones with some issues. I can't decide if I have another faulty headset or if the phone audio connector is the issue. The body glove headset is similar to the headset that comes with the 8125, but it looked more comfortable.
The problem I am having is this, the headphones only play in the right side. Messing with the plug on the headset results in some quick burst of audio on the left side and pulling it out a tad gives me some faint left audio and the right side audio goes out completely. It seems the plug and jack don't quite jive... anyone else experience this? It comes with an adapter for the "bigger jack" and upon trying one of my girls iPods, they work fine with the adapter in the mix.
My application is this... I listen to MP3's while riding my motorcycle and the earphones that came with the phone hurt my ears after a while. Plus they don't have the greatest audio quality. Looking for a comfy replacement, but the above issue has me scratcing my head.
Here is a link to the headphones: here
i think...
i think you have the wrong adapter. i tried using the slvrs adapter with my 8125 and it did not work same prob as you. i went to radioshack and got one from there and it did. im most absolutely sure is the inner wiring. what happens is that there's also a connection for a microphone on the 8125 so some adapters dont work.
http://www.pocketpctechs.com/main~unit~Cingular_8125-559~area~accessories~item~PPCPADPT21.htm
ps my friend got a mono one at radio shack and it worked for him both sides. hes not a audiophile but you get the idea, it has to be the connection of your plug.
The headphones in addition to be being stereo, have the microphone too, I think the paragraph in the page you linked clears up a few questions for me:
Most manufacturers create their devices allowing audio compatibility with only their specific brand headset or headphones. We have designed and engineered several different types of audio adapters to accommodate a variety of devices. Our unique audio adapters give you the freedom to use any standard 2.5/3.5 mm. 3 conductor headset and/or your favorite set of headphones.
Click to expand...
Click to collapse
It would seem although the Body Glove headset uses the 2.5mm jack, the internals of the 8125 are off enough that a select few aftermarket stereo headsets with mics will work with the phone. Interesting.
Upon further examination of the jack, it is different than the one that came with the phone. In spite of the BodyGlove being a stereo headet with a mic... just like the one that comes with the phone, the connector is different enough to not with aftermarket stuff I guess. Those dirty rascals!!!
The connector on the left is the one that comes with the 8125, the one on the right is the BodyGlove.
Searched and found this old thread. I went to connect my 8125 Wizard to my cars 3.5 jack using a standard adapter and it only came left channel.
Is there a more cost effective proprietary four-conductor jack to a 3.5 mm converter than posted above at PPC Techs? I was hoping to spend a few dollars.
I'm actually using my old Ngages audio cable to get Stereo sound out of my car stereo. It works but sometimes I can't use the mic on the cell phone to talk.
When it works it's really cool, but otherwise I gotta unplug the cable and use it like a regular phone during phone calls.
Hey everyone, I have been looking around to find an adapter that will allow you to charge the device, and has a plug(s) that allows for an external mic and ear phones. I have seen the ones that allow for just the 3.5 for music but don't have another plug for a mic input... Or they have a built in mic which will not work for me. The reason for this is so I can put it in my motorcycle helmet. I need to be able to attach a wind resistant mic. Also want to use my ear buds so I can actually hear people and music. Any ideas? Thanks!
John
Try www.Expansys.com they have some good accessories for the TyTN II
Already looked
I looked on expansys already. Did not find anything on their site. The closest thing I could find is this: http://www.semsons.com/2miusband3st.html
Any other ideas?
I don't think there is currently anything that will do what you want out of the box. You are probably going to have to get a soldering iron out and come up with a homebrew solution. You could wire up your wind resistant mic to replace the built in mic in either the standard headset or an adaptor. You are still going to need something like 11pin to 5&6pin or 3in1 adaptor to allow charging and audio/mic.
You can use the y-cable and stereo headphones w/ built in mic from the AT&T 8525 to do what you're asking.
When I plug my heaphones in, it seems that the internal microphone on my Tilt gets disabled. That is with my headphones plugged in, no one can hear me on the phone.
Is it possible to talk on the phone without having to uplug the headphones?
Nope.... plugging in headphones assumes you have headphones with a built in hands free mic, like what are supplied with the phone - its possible to get an inline mic so that you can use your own phones though.
Thanks
Thanks, my phone did not come with such headphones. So I am using a headphone adapter and a pair of earbuds. Has anyone seen any headphone adapters with a mic built in?
I want to be able to plug it to my car's stereo's aux in, hear people through the speakers and talk at the same time Short of splicing the cable and soldering on a mic, can such adapters be purchased anywhere? Anyone seen one?
Wow Just saw one!
Just saw one on the top banner Exactly what I am looking for. Unfortunatley they are out of stock. Would also be cool if it had an extension for the charger....
http://store.xda-developers.com/xproduct.php?xProd=1854&jssCart=765305601f8657736001990a45961674
denull said:
Just saw one on the top banner Exactly what I am looking for. Unfortunatley they are out of stock. Would also be cool if it had an extension for the charger....
http://store.xda-developers.com/xproduct.php?xProd=1854&jssCart=765305601f8657736001990a45961674
Click to expand...
Click to collapse
Go directly to the manufacturer.
BTW, googled it!
Hi guys, so im wondering if anyone else have encountered a similar problem to mine.
I usually play music through bluetooth headsets, works absolutely flawless!
But in my car, a 2010 Audi A4 i only have the option to talk via the phone, car doesnt support music playback. So when i plug my 3.5mm in and try to play music (via spotify) i get this crackling sound. Doesnt happen on other devices like my JBL speaker, but the wierd thing is that my girlfriends iphone doesnt produce any crackling sound what so ever in the car. So im looking for options, i run stock OOS and kernel, no root or anything.
Would V4A help with this?
Anyone else got a similar problem?
Someone might recommend me to get a bluetooth adapter via AMI in the car but sadly the car doesnt have AMI. Or atleast i cant find it anywhere!
Any other solutions you guys could recommend?
Thanks in regards.
felixdahl said:
Hi guys, so im wondering if anyone else have encountered a similar problem to mine.
I usually play music through bluetooth headsets, works absolutely flawless!
But in my car, a 2010 Audi A4 i only have the option to talk via the phone, car doesnt support music playback. So when i plug my 3.5mm in and try to play music (via spotify) i get this crackling sound. Doesnt happen on other devices like my JBL speaker, but the wierd thing is that my girlfriends iphone doesnt produce any crackling sound what so ever in the car. So im looking for options, i run stock OOS and kernel, no root or anything.
Would V4A help with this?
Anyone else got a similar problem?
Someone might recommend me to get a bluetooth adapter via AMI in the car but sadly the car doesnt have AMI. Or atleast i cant find it anywhere!
Any other solutions you guys could recommend?
Thanks in regards.
Click to expand...
Click to collapse
Can you update the car stereo firmware? At that age possibly not, but I had similar issues with a different phone and updating the media panel firmware fixed connectivity.
Also, try changing the Bluetooth codec in settings > advanced to see if that helps connect.
The crackling via 3.5 jack sounds like a faulty wire or lose connection on input or output. Do you get the same issue when you plugin the jack to your JBL input socket?
gurningchimp said:
Can you update the car stereo firmware? At that age possibly not, but I had similar issues with a different phone and updating the media panel firmware fixed connectivity.
Also, try changing the Bluetooth codec in settings > advanced to see if that helps connect.
The crackling via 3.5 jack sounds like a faulty wire or lose connection on input or output. Do you get the same issue when you plugin the jack to your JBL input socket?
Click to expand...
Click to collapse
Could probably update the firmware, but the shop is most likely gonna ruin me haha.
Thats the wierd thing, doesnt happen on my JBL speaker, or a wired pair of headphones. Hence why i was sure it was the car. But my girlfriends phone sounds crystal clear, old moto x style didnt have the problem either!
Had the same problem with 3.5mm headphones until I removed the pre-applied plastic screen protector... This thing was causing too much static electricity in my jeans pocket as I walked resulting in crackling noises in the headphones
We have two op5, And The other sounds exactly same, cracling sound. The other Works just fine. We also have A4 b8. Our other car, VW Caddy, both Works fine.
Wires are good, jacks also.
Any ideas Whats wrong?
I have the OnePlus 5t and a 2011 a4 b8 and have the same issue... tried with 2 different aux cables (that worked fine with my old phone) Glad I'm not the only one. My phone sounds fine on any other device. Blasting music through my headset right now no problem. But in the a4 I get crackles any time I bring my phone volume over half! If anyone finds a solution I'd love to try it. Unfortunately can't get viper arise to install on stock room (rooted) so I haven't tried that route. My only Idiea is to try an amplifier.