Hey guys, I'm a longtime XDA browser but hardly ever post. I have the MXPE rooted with the newest TWRP build and has been running great since I got it. last night flashed the Deodexed 6.0 build from AICPs 5.1.1. I had some issues with the SD card being mounted as internal storage and erasing something so I tried to flash back to stock as my nandroids weren't seen as usable.
Long story short when I flashed back to stock, the recovery would never take. I've flashed the stock recovery and twrp to no avail. For some reason it wont actually stick. Everything else is back to stock but that. When I used the win toolkit and tried to flash twrp again it said something about the folder locations so I'm wondering if I messed something in the partitions.
Question is, have you guys ran into this issue or have any insight on where to go from here? I've looked around but I couldn't find a post that the same as this issue. As a side note, I can get into the bootloader just fine.
I appreciate any info that someone can provide.
Flash twrp. Reboot back to recovery from recovery. Reboot system.
Hopefully it's that easy. Stock os flashes stock recovery on boot. Rebooting recovery from recovery prevents that from happening.
From TWRP:
"Note many devices will replace your custom recovery automatically during first boot.... Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install."
mxpe 6.0
Thanks for the info ffejy462. What happens when I try to flash TWRP and it doesnt stick? I know for a fact that I can boot into it temporarily with fastboot boot and the recovery file. Should I just flash it from there?
THEFILLTER said:
Thanks for the info ffejy462. What happens when I try to flash TWRP and it doesnt stick? I know for a fact that I can boot into it temporarily with fastboot boot and the recovery file. Should I just flash it from there?
Click to expand...
Click to collapse
I'm sorry I didn't see this sooner. Flash recovery with fastboot. Boot into recovery. From reboot menu in recovery, select reboot recovery. Twrp will patch so recovery isn't lost again.
mxpe 6.0
That did it. thanks alot ffejy462!
Hi, I need help in installing Recovery.
I unlocked the bootloader, installed TWRP and then CyanogenMod 13 ROM.
After this, Oxygen Os 3 got released. I downloaded the zip file and flashed through TWRP.
Oxygen OS got installed but after this, I couldn't go back in TWRP recovery.
I tried everything. I use "fastboot flash recovery twrp.img"
everything works
but when I boot in recovery, phone gets stuck on the LOGO and nothing happens.
Is there any way to solve this issue.
Almost the same for me.
When I flash oOS 3.0.2, unable to reboot using Grarak'sTWRP or TWRP-3.0.2-1.
Always stuck on boot logo without animation.
I reverted to old TWRP and oOS 2.2.1
piyushmodi01 said:
Hi, I need help in installing Recovery.
I unlocked the bootloader, installed TWRP and then CyanogenMod 13 ROM.
After this, Oxygen Os 3 got released. I downloaded the zip file and flashed through TWRP.
Oxygen OS got installed but after this, I couldn't go back in TWRP recovery.
I tried everything. I use "fastboot flash recovery twrp.img"
everything works
but when I boot in recovery, phone gets stuck on the LOGO and nothing happens.
Is there any way to solve this issue.
Click to expand...
Click to collapse
Try to install OOS recovery or Hybrid recovery.
Nobody ever learns or reads nowadays....
Read up on bootloader versions on Oneplus 2 and you will find the explanation perfectly understandable.
Thank You So much for your help. Finally it worked but I lost my data! Anyways, no issues.
Can you give us the way you fixed your problem .
Thanks
Hi guys, been using my rooted but otherwise stock OOS rom with TWRP and Magisk for the past few weeks. Today I decided to take the plunge and try either the Lineage OS or Resurrection Remix roms.
I'm using the latest OFFICIAL TWRP.
So I decrypted following the instructions to flash "no-verity-opt-encrypt-5.1.zip", then format data. All went well, so I then sent over the ROMS I wanted to try out. I started with the official ResurrectionRemix. Bootloop. Then the unofficial LineageOS. Bootloop.
Ok, well I guess I'm not gonna get to use any of the cool new OS's for awhile. I'll install the full stock firmware zip so I can have a working phone again. Bootloop.
Now when I say bootloop, the phone is booting to the BootAnimation and just repeating it. It shows the proper boot animation for whatever zip I have installed (resurrection/LOS/OOS), but it stays on there for up to 20 minutes before I have to hard reboot to the recovery again.
I decided to install the stock recovery trying a few methods. I first tried the ALL-IN-ONE tool. It said it flashed the recovery fine, so I booted to the recovery and after staying on a black screen for too long, the language options came up and I sighed a breath of relief. But before I could select English with the volume buttons, it rebooted by itself. It did this again when I manually entered recovery. So I figured maybe the tool flashed the wrong version, so I googled stock recovery for OnePlus 5, I found a few random links for stock recoveries for the OP5 and flashed them, but they more or less do the same thing or not boot at all.
I've tried changing the filesystem for both Data and System using any combinations of EXT4 and F2FS. Everything results in boot animation bootloops.
I have been flashing Roms since the Samsung Galaxy S3 and every phone since and never had any problems.
Currently when trying to install the stock Full OOS official zip with TWRP, the phone won't even go to the boot animation, it only goes to a black screen with the top LED in a light blue color.
I have also tried every version of TWRP there is for the OnePlus 5. Unofficial, Official, 3.1.1-0 and 3.1.1-1.
So I guess my question is....What filesystem is each partition supposed to be on and for which OS?
Lineage based:
System: ?
Data: ?
OOS Based:
System: ?
Data: ?
And any ideas on getting my phone running again?
And anyone have an official confirmed working version of the stock recovery? The one from ALL-IN-ONE TOOL doesn't work for me. It loads the language selection, then the screen goes black with a light blue LED on the top of the phone.
Actually I'm getting that on some roms instead of the bootanimation, like FreedomOOS. What does it mean when you have a black screen and a white LED?
Man, I really thought I was getting somewhere. If I boot into TWRP, change the Data partition to "F2FS", then flash the stock recovery, the stock recovery will boot, however, when inside the stock recovery and I try to flash the stock zip, it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
Ok, I have the official stock recovery from the OnePlus site, but still can't use it. Here is was happens depending on how I left it with TWRP:
System: F2FS
DATA: F2FS
- Stock recovery will load after some time, freeze, then the screen goes black with white LED on top.
System: EXT4
DATA: F2FS
- Stock recovery loads fine, I can go through the settings and install from SD card, but when I do it says "Flashing, don't turn off your device" for about 5 seconds and then goes back to the list of roms on the SD card, not having flashed anything at all.
System: EXT4
DATA: F2FS
- If I try to flash stock rom through TWRP, it just boot loops on the animation forever.
I have now also tried flashing the stock boot.img, but no difference.
I have 2 things you can try!
First, replace the bootloader with stock and do a factory reset:
1. flash the stock recovery over
2. then in fastboot mode enter, fastboot oem lock (This forces the phone to wipe cache and data, and also do a complete reset)
Did it work? if yes YAY if not go to Second!
Second if your system.img is ****ed up you have to replace it!
Download the newest version of the stock rom from oneplus link here
Unpack it
research how to use an extractor to convert the system.new.dat to system.img
once thats completed enter fastboot mode and flash the new system.img over with Fastboot flash system system.img
now go into recovery and do a factory reset and wipe cache, and dalvik
Please reply back wether or not this work
"Ihave 2 things you can try! First, replace the bootloader with stock and do a factory reset..."
Is the bootloader simply the boot.img?
After doing the first thing, it simply says that the device is corrupt and will not boot. But it is locked again.
But I will have to unlock it again to do any further flashing.
Hmm, I think I may have gotten it. After unlocking again, flashing the stock recovery and boot.img, then locking again and wiping in the stock recovery, I have finally booted into the stock rom.
I still have no idea what went wrong, and I really want to know, so that in the future I can flash other Roms, like LineageOS.
I mean, I followed the steps exactly.
If it says the device is corrupt it simply means you got something else besides stock rom.
So now unlock it and try the system.img instead
It was because I still had TWRP with the stock rom.
I got it working though, thanks for your help.
Do you have any idea on what might have went wrong when trying to flash the lineageOS based roms and why it got messed up so royally?
Great to hear you fixed it ^_^
Probably some minor bug, if you wanna try installing lineageos again use the 3.1.1 TWRP build that supports backups and do a full backup so you don't have to go thru all this again
---------- Post added at 12:17 AM ---------- Previous post was at 12:13 AM ----------
Not really just try again but remember to use TWRP 3.1.1, as 3.1.0 don't support backup and probably have been part of your problem
If your trying again and gets it successfully installed could you do me a favor and test if Drivedroid works on it? And pm me the result, I'm looking for a rom where Drivedroid will work... Haven't found one so far
You know, I did do a backup with the OFFICIAL TWRP, but it also resulted in a bootloop. I made the backup after decrypting, so I don't know why it bootlopped.
https://forum.xda-developers.com/oneplus-5/development/rom-unified-lineageos-7-1-2-t3635483
Is this the one you tried installing?
I tried like every ROM at one point yesterday, but I think I started with
https://forum.xda-developers.com/oneplus-5/development/rom-resurrection-remix-n-7-1-2-t3636578
Did you remember Gapps?
Also in some cases its better not to root before you have the custom rom running, you usually only need a custom bootloader like TWRP
Yeah, I tried with Gapps, and I never rooted before first trying to boot.
As of yesterday Ressurrection remix, released the first official stable build so try again your should'nt have any problems if you follow the guide 100%
Ever find a solution? I'm stuck here now. Can't get any ROM to boot up, they all get stuck on the boot animation
Bump. I am also stuck in this state
Hey fellas,
so I rooted my phone and tried to install some Magisk modules, but after rebooting it got stuck in the TWRP bootloop. So I flashed the Nandroid backup and it got stuck in the OOS boot animation. After that I tried reflashing OOS, but it didn't change anything, so I tried Lineage OS and now it won't even get past the Oneplus logo at the beginning and keeps restarting.
Thanks in advance
EDIT: when I flash the stock ROM through TWRP it installs normally, but then when I try to reboot it says there is no OS. So I flashed the stock OS to try adb sideload, but my pc says it cannot read the zip.
I also decrypted my phone through the OP5 Decrypt App, before the bootloop it worked for some time.
Of course I wiped everything before every action.
if you can bootup into recovery, try go into advanced and format data and system.
if you can't your last chance is using adb - flash a default rom.
Is it any different than wiping everything? Because it didn't do anything. I can access both twrp and fastboot so I guess it's not that bad
sounds like you went from unencrypted to an encrypted rom and your data is encrypted, or visa versa.
yep, it's vice versa, I used the OP5 Decrypt App after rooting. Is OP5 encrypted by default?
If you've tried the Android 8.0 Rom, just go to the official OP5 support site and download stock rom, flash it via ADB sideload if you can. (Don't forget to format data etc etc..) and restart from scratch.
Unlock BL if it's relock, then flash TWRP and go for a custom ROM. That's what I did, happened to me 2 days ago.f
EDIT : Oh you just flashed Magisk.. Well, try this anyway.
I tried flashing Lineage, but I can't install Oxygen
Ok, so apparently OOS boots up only after relocking the bootloader. And I had to make adb use more RAM to get sideload to work.
I had OB3 installed with the unlocked bootloader and I wanted to try installing TWRP and going back to stock recovery.
So what I did was:
1. Install TWRP
2. Launch TWRP and confirm that it is working
3. Flashing boot.img from the OB3 stock dump from the related dev thread
4. The OS boots but it is stuck in "Android is starting". It seems that it cannot complete the process and starts from scratch for some reason
After this issue, I also tried to sideload OB3 OTA but no avail.
Do you have any idea what I might be doing wrong? Or is there a solution to this issue without reflashing the full rom?
If I recall when rooting my phone, after flashing the files in TWRP I had to select which partition to reboot to (A or B) and had this same problem before realizing I was booting into the wrong partition. New to Android so someone with more experience may have more useful info....