Database Users

[help] "firmware upgrade encountered an issue"

I was trying to install an Official Stock Samsung Galaxy S4 GT-I9505 firmware, from SAMMOBILE Link for the firmware I tried to use: http://www.sammobile.com/firmwares/3/?download=26516. So while flashing it with ODIN, I think it just randomly disconnected, but that just bricked my phone. I don't know whether it is a soft brick or a hard brick, but this is what happens to my phone, every time I turn on my phone whether it's done normally, the download mode or recovery mode method I will be stuck on that screen.
So now I typed in the error on Google to see how it can be fixed. Link to the method to fix the error: http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
Firstly, my computer (running Windows 7 ULTIMATE 64-BIT) can detect my phone, saying the drivers have been installed successfully. However KIES doesn't detect mine. Anyways I still try to do this method where I have to go to Tools -> Firmware Upgrade and Initialization on KIES. I type in my model name: GT-I9505, that works, now I have to do my S/N or Serial Number: RF1DXXXXXXX, so when I press OK it says GT-I9505 doesn't support 'Intialising', so I am stuck have no idea what to do.
Also, while flashing I tried repartition my S4, to remove all of the stuff I had, none important, except my music which I transferred to my PC. Solved, just flashed Official firmware, it now works.
Just separately repartitioned my S4, it works but S4 is now stuck on boot loop, so have to flash a 4.4.2 Official Firmware.

Harnessful said:
I was trying to install an Official Stock Samsung Galaxy S4 GT-I9505 firmware, from SAMMOBILE Link for the firmware I tried to use: http://www.sammobile.com/firmwares/3/?download=26516. So while flashing it with ODIN, I think it just randomly disconnected, but that just bricked my phone. I don't know whether it is a soft brick or a hard brick, but this is what happens to my phone, every time I turn on my phone whether it's done normally, the download mode or recovery mode method I will be stuck on that screen.
So now I typed in the error on Google to see how it can be fixed. Link to the method to fix the error: http://androidcentral.us/2013/09/how-to-fix-firmware-upgrade-encountered-an-issue-on-kies/
Firstly, my computer (running Windows 7 ULTIMATE 64-BIT) can detect my phone, saying the drivers have been installed successfully. However KIES doesn't detect mine. Anyways I still try to do this method where I have to go to Tools -> Firmware Upgrade and Initialization on KIES. I type in my model name: GT-I9505, that works, now I have to do my S/N or Serial Number: RF1DXXXXXXX, so when I press OK it says GT-I9505 doesn't support 'Intialising', so I am stuck have no idea what to do.
Also, while flashing I tried repartition my S4, to remove all of the stuff I had, none important, except my music which I transferred to my PC.
Just separately repartitioned my S4, it works but S4 is now stuck on boot loop, so have to flash a 4.4.2 Official Firmware.
Click to expand...
Click to collapse
Hi,
Can you get into recovery?
Can you still see your phone in odin?
If so , disable kies (task manager) and try to flash the firmware again.
Wipe data and cache before and after flashing firmware.

bootloader problem on s6edge+

hey guys im sorry if i post this on the wrong section but i followed this tutorial: droidviews(dot)com/root-galaxy-s6-and-s6-edge-on-android-6-0-1-marshmallow-update/ to root my s6 edge+ and it went black... after some research i found out the tutorial wasnt for my device(SM-G2928F) so i flashed it with cf-autoroot and then it boot looped for like an hour. I downloaded the original greek firmware from sammobile but it brings me up this error: SECURE CHECK FAIL : (BOOTLOADER).. any help?

UPDATE: changed the port and run Odin as admin now it says: SECURE CHECK FAIL : (RADIO) Odin log: pastebin(dot)com/4w1943HF

UPDATE: now when I exit recovery mode it doesnt start and tells me: An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software.(I can still go into recovery mode)

Let me check you have flashed a firmware not for your device with odin or just a zip? First I would try flashing the most recent firmware you can find for your device with odin, some bootloaders can't be downgraded. If that doesn't work then the emergency firmware recovery will work, I've used kies emergency firmware a few times.
Hopefully someone with your device will point you in the right direction if you are stuck

I flashed a firmware not for my device but I found a solution on another XDA post thank you

My Galaxy S5 appears to be unflashable/unrootable, any advice?

Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas

Khalitas said:
Hi,
I recently got me a Galaxy S5 (SM-G900F) and the first thing i wanted to do was installing CM13 as I always do with my new phones. However, when i followed te steps on CM wiki using Heimdall to flash TWRP the blue bar of the downlaod mode increases a small bit, then stops and in the command promt it says something about error with finding PIT. After trying this for three times i decided to go with Odin, which I do prefer anyways.
I tried flashing TWRP , the blue bar is filling to 100% but then on the little screen where Odin usually states FAIL! or PASS! it just says RESET! and my phone is restarting. Shortly after it restarded you can see the RESET! turning to PASS!, but when I tried checking in TWRP is installed, it wasn't. I tried it again and then Odin suddenly says FAIL! After restarting my phone it says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I couldnt even enter download mode anymore till I tried if getting out the battery would work. I could enter download mode again and flashed the same TWRP on my phone again, and aigain it says RESET! but after that my phone worked again. I tried flashing with another version of Odin and TWRP but same thing happened - First run it said RESET!, second run FAIL!.
I thought maybe rooting the device and installing TWRP via their app afterwards could do the trick. So i tried flashing Autoroot with Odin but it made my phone showing a screen with Samsung logo and in the upper left corner something about recovery mode, seemed to be a loop/freeze. So i took out the battery again and flashed TWRP and that solved the problem again. At last I tried rooting by using TowelRoot but it says the service is not available for my device, even though S5 is listed as a supported device.
I really have no idea what to do anymore, would be very grateful if someone could come up with a solution.
BTW: Is it possible to flash CM13 without using custom recovery by using stock recovery?
Greetings
Khalitas
Click to expand...
Click to collapse
RESET! is basically the same thing as PASS! What version of TWRP are you installing? The keis screen you got is the same as download mode. Why are you using heimdal? your idea to go with Odin was a good one. Anyways, download TWRP 3.0.2 (not 3.0.2-1 or 3.0.2-2 as they are buggy) and flash it in Odin, reboot to recovery and install the ROM you like, of course following its specific install instructions. No, you cant install a custom rom with stock recovery

Thanks for your answer, meanwhile i managed to fix this problem. Had to flash the latest Firmware because twrp (could just install the oldest version otherwise I had no option to boot into recovery at all) said no OS installed. After rooting via Odin worked like it's supposed to.
Why did I use Heimdall? Because I wanted to stick to CM-wikis instruction and they used Heimdall.

S7 Edge G935F // Faulty ODIN flash // Stuck in Bootloader [SOLVED]

Hi Guys,
today I wanted to flash the latest Stock ROM for my device via ODIN. I've done this many times before and (thought) I knew what I was doing. It is my third Phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly I wasn't aware that this particular device was locked.
After downloading the international firmware I tried to install it and ODIN got stuck while writing the system.img. After that my phone did not boot up (of course). After that I downloaded and tried to isntall the firmware of the carrier, but I had the exact same issue. When I turn my device on I get to an error screen which tells me to execute an "emergency recovery" via the Samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
FRP hinders me to install a custom recovery and the stock one does not allow any isntallations via ADB or SD card.
My qustion is: Does anyone know how I can install a rom from here?
I know that I had to have made some changes prior to the flashing, but as I said I was not aware and an Idiot for not double checking.
Since it is not bricked yet I suppose there must be an answer but I can't find anything.
Thanks in advance
Edit:
After only installing the stock bootloader, I am autmaticly entering it when I boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"

Fix
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.

fabivons said:
hi guys,
today i wanted to flash the latest stock rom for my device via odin. I've done this many times before and (thought) i knew what i was doing. It is my third phone frome the same carrier and none of them were branded/ locked devices before. Unfortunatly i wasn't aware that this particular device was locked.
After downloading the international firmware i tried to install it and odin got stuck while writing the system.img. After that my phone did not boot up (of course). After that i downloaded and tried to isntall the firmware of the carrier, but i had the exact same issue. When i turn my device on i get to an error screen which tells me to execute an "emergency recovery" via the samsung smart switch software. But it too gets stuck on some point and only gets me to an error screen.
Frp hinders me to install a custom recovery and the stock one does not allow any isntallations via adb or sd card.
My qustion is: Does anyone know how i can install a rom from here?
I know that i had to have made some changes prior to the flashing, but as i said i was not aware and an idiot for not double checking.
Since it is not bricked yet i suppose there must be an answer but i can't find anything.
Thanks in advance
edit:
After only installing the stock bootloader, i am autmaticly entering it when i boot my devive. On the bottom of the screen is an error message: "dm-verity verification failed...
E:failed to mount /system (invalid argument)"
Click to expand...
Click to collapse
have u solved your problem ? This problem i am facing on the s7edge nougat ? Plz help ?

Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might be worth a try!
Good luck!

Fabivons said:
Hey,
look at the second post I made in this thread. There is described how I got my S7 up and running again. I'm not sure if it is a valid solution since it felt like trial and error to me, but I'm writing this text from my S7 so it might me worth a try!
Good luck!
Click to expand...
Click to collapse
y i have done that and the device boots up but some applications force close and when i insert the memory card , the phone gets restarted everytime

Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Tell us in detail now.

SjDU said:
Tell us in detail now.
Click to expand...
Click to collapse
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.

Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?

suhaibahmad said:
the time when u were fixing your device , you were on marshmallow or nougat ? beacuse i am on nougat and whenever i flash twrp , it stucks there and not booting into it even i have ticked the oem unlock and usb debugging in developer mode ?
Click to expand...
Click to collapse
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.

Fabivons said:
Does the TWRP flash complete? Can you boot up the OS after you flashed TWRP? (And did you download the correct version of TWRP for your device?)
As a last resort, you could try and flash marshmallow on your device and see if it works there.
Click to expand...
Click to collapse
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally

suhaibahmad said:
if i flash marshmallow it doesnt even boot up and in the odin mode showing binary and everything as custom , if i flash nougat and then flash twrp and try to manually boot into twrp it stucks on the s7edge screen which comes before recovery , and if i boot the mobile normally without the button combination then it stucks on the second logo SAMSUNG . if i flash again the stock recovery then boots normally
Click to expand...
Click to collapse
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.

Fabivons said:
Have you tried to perform a regular factory reset via the OS on nougat? Sometimes that does the job, too.
But as I said. I can only give you my best guess here - my phone worked after my procedure, so I didn't investigate further.
And don't forget: Google is your friend.
Click to expand...
Click to collapse
thats your kindness , yes i have performed the factory reset several times from recovery , but when i trying to reset it from settings , it goes after restart to recovery with dm-verity error , then i wipe and factory reset from there

Fabivons said:
For anyone in the same situation: I fixed it.
In the end all you have to do is flash the firmware with the fitting PIT file. If you firmware consists of multiple files and there is a "HOME"-file, flash it with this one first on the AP slot in ODIN. After that the same again just use the AP file this time.
My phone is up and running again now.
Click to expand...
Click to collapse
Fabivons said:
"please"
I described everything I did in the posts before.
As soon as you can enter the system again all you need to do is deactivate the locks I was talking about in my first post and perform a full wipe.
After that you can install any ROM you want via ODIN just like you are used to.
If that doesn't work for you, I don't have any answers either.
But again:
Prep work:
1. Download most recent ODIN
2. Download the correct firmware for your carrier (from www.sammobile.com)
3. Download the correct PIT file for your device
4. Put your device in download mode
Process:
1. Extract your firmware if it is a zip
2. Start up ODIN
3. Connect your device and check if it's detected by ODIN
3. Put the PIT file in ODIN
4. Put the "HOME" file of your firmware in the PDA slot of ODIN
5. Press start
6. When finished unplug your device and restart phone and ODIN
7. Reconnect your phone and check if it's detected by ODIN
8. Put all the other files of your firmware + the PIT in the correct slot in ODIN
9. Press start
After that my device booted up but still was, as you described too, a little buggy. So I deactivated FRP, activated USB debugging in the dev options, installed TWRP, performed a full wipe and installed another firmware of my choosing via ODIN (without a PIT file this time).
I am running 7.0 on my device now and it works flawlessly.
Click to expand...
Click to collapse
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model

SjDU said:
Well I had the same issue but Odin method didn't work for me on Nougat. And also FRP lock was On. every time I flashed the files it give me FRP on error. so I had to use Smartswitch. Even though I used original csc and ap files with latest Odin. BTW I have SM-G935FD model
Click to expand...
Click to collapse
Well FRP has to be turned off (the button in the menu is called "OEM unlock, the button has to be set to on which deactivates FRP). You don't mention using a PIT file - did you use one?

Bricked S8, have tried multiple solutions

I successfully rooted my phone but it got stuck in a bootloop when I restarted it.
I can't enter recovery mode or turn it off, all I can do is enter odin mode.
I have tried:
1. The AGQ5 fix (https://forum.xda-developers.com/ga...g-aqg5-fix-t3636857/post73032395#post73032395) it doesn't work.
2. Smart switch, it says my device is unsupported
Please help!

1- flash twrp again
2- flash stock rom with odin ( download mode )
you can reboot just with vol - + shut down B

you maybe installed the wrong version of twrp the latest one is for the new bootloader if you have the older bootloader install the last version

It doesn't boot into TWRP even after I flash it again

djisgod said:
you maybe installed the wrong version of twrp the latest one is for the new bootloader if you have the older bootloader install the last version
Click to expand...
Click to collapse
Sorry if I'm asking a question but how do I check my bootloader version? I just used the latest version (twrp-3.1.1-0-herolte.img.tar) from a site but I can't link it.

popmpopm said:
1- flash twrp again
2- flash stock rom with odin ( download mode )
you can reboot just with vol - + shut down B
Click to expand...
Click to collapse
It doesn't boot into TWRP even after I flash it again

Flash full stock in odin. Then you can try twrp again if you wish.

It worked, thanks so much for all your help. Words cannot describe how grateful I am.

help
osidaksjdmw said:
It worked, thanks so much for all your help. Words cannot describe how grateful I am.
Click to expand...
Click to collapse
help me
how can did you get to download

HELP ! S8 Wont BOOT !!
I have the same problme! I can flash Combination file and then its booting and I can go to recovery mode ,but after when I flash again STOCK rom succesfully ,S8 wont boot Any Idea what is going on ? Im on U2CRED ....PLEASE HELP !!!!

zassamel said:
I have the same problme! I can flash Combination file and then its booting and I can go to recovery mode ,but after when I flash again STOCK rom succesfully ,S8 wont boot Any Idea what is going on ? Im on U2CRED ....PLEASE HELP !!!!
Click to expand...
Click to collapse
I can flash Combination file
Click to expand...
Click to collapse
What this supposed to me ?

samsung s8
StonebridgeGr said:
What this supposed to me ?
Click to expand...
Click to collapse
Combination File ,its AP witch allow you to bypass for example FRP lock

osidaksjdmw said:
I successfully rooted my phone but it got stuck in a bootloop when I restarted it.
I can't enter recovery mode or turn it off, all I can do is enter odin mode.
I have tried:
1. The AGQ5 fix (https://forum.xda-developers.com/ga...g-aqg5-fix-t3636857/post73032395#post73032395) it doesn't work.
2. Smart switch, it says my device is unsupported
Please help!
Click to expand...
Click to collapse
EXACT same problem. Put I cant flas anything via Odin. Not even TWRP. What do I do???
PLEASE help

benna said:
EXACT same problem. Put I cant flas anything via Odin. Not even TWRP. What do I do???
PLEASE help
Click to expand...
Click to collapse
why you cant? what error did it give you? might you dont have drivers installed on your pc?

StonebridgeGr said:
why you cant? what error did it give you? might you dont have drivers installed on your pc?
Click to expand...
Click to collapse
ODIN MODE
DOWNLOAD SPEED : FAST
NAME: SM-G950F
CURRENT BINARY: CUSTOM
SYSTEM STSTUS : CUSTOM
RMM STATE: PRENORMAL
FAP LOCK: OFF
OEM LOCK : OFF
SECURE DOWNLOAD: ENABLED
SW REV. CHECKFAIL(BOOTLOADER) DEVICE :2 BINARY :1
I can ONLY boot into download mode.
When switching on the phone , I get the Galaxy S8 logo by Samsung with the red writing on the top:
"Only officiall released binaries are allowed to be flashed"
Flashing original firmware via ODIN just fails.
"Complete (write) operation failed !!" is the error in Odin.
I tried different versions of Odin , original firmware and boot loaders suggested on XDA. All just fails.
So my phone is just dead.
I had the lasted firmware on ( OTA update about a week ago)
I installed TWRP now , roooted with Magisk , all was fine untill I rebooted the phone.
So drivers and all are fine , everything worked until I rebooted the phone.
Please help. What to do now. I need my phone !!!
PLEASE