Related
Dear developers,
I have deleted (by mistake) program Launcer from my Smartphone and now it is not going to load. When I turn on it, there is only symbol of IDEOS. After a minute symbol starting to twinkle, but system not loading.
Could you please tell me how can I return to original firmware?
I hope someone will be able to support me.
If the launcher is the problem, you can just install another, or push again the original from a rom via adb. I assume that the device is rooted(I think you cannot delete a system app if isn´t). If you can connect to pc, then possibly you can install a launcher from huawei' s suite(I´m not sure because I don' t use windows and I haven't try this app) or from a android file manager like QtADB, Android commander or Droid Explorer. You can also install it only with adb via windows command prompt:
http://www.brighthub.com/mobile/google-android/articles/37151.aspx
And maybe, if wifi is enabled and connected, you can just install a launcher from market via pc' s web browser:
https://market.android.com/
The Modaco wiki has a list of original firmwares, but no link to Huawei works anymore. However, it is possible to download the latest China Unicom firmware - which does contain english language support. That should at least get you started.
As a new user I can't post links yet, but it is easy to find if you look for u8800 software, and then switch to Chinese.
Put the extracted directory (dload) on an sd card, in the top/root, put it in the phone and then hold volume down and power on.
Note, this will blow everything away to start from scratch so make sure it is what you want. In addition everything will be in Chinese so you need to be able to navigate to the settings to set it to English.
Better ideas? I am a noob myself so no guarantees...
I have unrooted it before to delete some trial games. And deleted Launcher by mistake.
I can't connect via usb now.
I'm afraid if I upgrade firmware, I have less memory because old one will not be deleted. Or maybe I'm wrong?
No, you're not gonna have less memory.
Did you tried to wipe to factory defaults from recovery mode(power button and vol+)?
You will not have less space because an original firware will format everything from boot partition, system and data... Basically , it will give you original software and status like it came from factory ... Like the other user said, jut find it, extract it , put the dload directory to the root of you sd card and hold volume down and start up the phone ... You will see a progress bar and when it is finished , the phone will restart itself, you will have to wait longer due to the creation of new files and there you go
vladislavnm said:
I have unrooted it before to delete some trial games. And deleted Launcher by mistake.
I can't connect via usb now.
I'm afraid if I upgrade firmware, I have less memory because old one will not be deleted. Or maybe I'm wrong?
Click to expand...
Click to collapse
Install recovery first, then you can connect your device to PC using recovery. If you have friend that have X5, copy the launcher. Else, just install Custom ROM.
The old one will be removed if you install custom ROM. If I'm not wrong.
Recovery.
Unplug USB, turn off your phone, press and hold vol + and -, then press power. Hold those three buttons until it turned on and the screen is purple-pink.
Backup all image data(copy). The rest is in the link.
Sorry for my English. Hope you understand what I write..
dancer_69 said:
No, you're not gonna have less memory.
Did you tried to wipe to factory defaults from recovery mode(power button and vol+)?
Click to expand...
Click to collapse
You are magician. it works now.
hmmm... but there is no launcher application - no workspace available. it doesn't want to load as before. strange.
upgrade don't work too. It is cycle repeating of step1/2.
I just tested and found that you can copy the missing apk from bootloader mode. In this mode(power + vol- + vol+ buttons), when connected to pc via usb cable all partitions of device mounted(at least this happens on linux). So, you can navigate to system partition on /system/app folder and copy there the missing launcher' s apk file. You can find this file on a custom' s rom(or on an official' s rooted rom like modaco's roms) update.zip file. It's on system/app folder. I tested this on linux and I could(not as normal but as root user though) copy or delete files from there.
dancer_69, thank you for your support. At my side when I connect via bootmode, there is only flashdrive is visible.
It's really strange that it is not going to upgrade.
I'm able to apply sdcard:update.zip. So maybe if to put this application inside of the card, it could install. but I don't know how to do it.
I finded apk file and tried to install it but it don't receive file because it hasn't some certificate. ???
I think you have 3 options here.
1. flash an official rom(you put the dload folder of rom's zip file on root of sdcard and boot to bootloader mode. The update starts automatic)
2. Use a linux system(maybe a livecd) to access the other partitions.
3. Try to reroot the device from pc, via superoneclick app(you can find it here), so to have access to system again.
but I haven't access to installation program area. nothing!
I have only ability by pressing (vol + and on) to choose install update.zip from flash card.
so.
1. when I runned new firmware from dload it didn't install. it was cycling at first level (1/2)
2. linux is good idea. but I'm not sure that it's will be profitable. maybe I have turned off access to partitions inside of phone
3. I can't install superoneclick as I'm not able to install any application.
I hope we are closer to some geniously idea. I have bought phone yesterday and we haven't service center in our city. So, I need to buy the other one.
This is not so serious problem, it' s not hardware, it´ software related. And I think you cannot turn off access so easy.
The superoneclick is a pc application. You don't need to install something on device(if I remember well, because I use it once before a long time). You can try it.
And you can try linux too.
I don't think that this is a problem that only service can solve it.
What firmware you tried? Try another one. And better try to find the one that you device has(if you know it)
Thank you for positive opinion.
1. Will try to change firmware as you said. Try 2 more firmware from Huawei.
2. Superoneclick needs approval from phone, today night I wasn't able to run it.
3. I'll try Linux too.
dancer_69 said:
This is not so serious problem, it' s not hardware, it´ software related. And I think you cannot turn off access so easy.
The superoneclick is a pc application. You don't need to install something on device(if I remember well, because I use it once before a long time). You can try it.
And you can try linux too.
I don't think that this is a problem that only service can solve it.
What firmware you tried? Try another one. And better try to find the one that you device has(if you know it)
Click to expand...
Click to collapse
Thank you very much for your excellent support. It's work now after trying of other firmware. Everything is excellent now.
I only noticed that battery is no very capacitive.
Please, send me your paypal account, I want to donate you a little.
I've managed to softbrick my nexus 10 by trying to disable extra services (was getting about 1.5 hours battery life with media services running the processor 100% all the time). It worked wonderfully (no negative side effects, went back to 10+ hours with the screen on, or days on standby) until I reboot it and now it won't load past the moving colors (Android 4.4.3, unlocked and all that).
I have TWRP, I was hoping to backup everything possible via usb, but it seems it's incapable of doing so. ADB backup can't be done using TWRP since there's no unlock function (reaaal useful there, recovery mode that doesn't support backups) and adb pull fails if I try to pull everything since there are files and folders with invalid file names (who puts ":" in folder names? they should be shot), and I don't know specifically what to pull, I was just going to get everything put back what I found was missing that I needed. There's no room to do a backup onto the device, and since the N10 has to sd/microsd, well... Useless options are useless.
Is there anyway to just do a proper backup with TWRP over USB? Or is the "recovery" mode as useless as I think it is when it comes to backups? (I'm aware I can get the tablet back to working order if I disregard the data on it, this is a question about backing things up before doing so)
Edit: Also, I have a pro version of SkipSoft ToolKit, but unless you can actually load into the OS the toolkit can't do anything at all.
Just really frustrated with the lack of doing something as basic as copying files from one place to another. Been messing with this all morning.
Diet6 said:
I've managed to softbrick my nexus 10 by trying to disable extra services (was getting about 1.5 hours battery life with media services running the processor 100% all the time). It worked wonderfully (no negative side effects, went back to 10+ hours with the screen on, or days on standby) until I reboot it and now it won't load past the moving colors (Android 4.4.3, unlocked and all that).
I have TWRP, I was hoping to backup everything possible via usb, but it seems it's incapable of doing so. ADB backup can't be done using TWRP since there's no unlock function (reaaal useful there, recovery mode that doesn't support backups) and adb pull fails if I try to pull everything since there are files and folders with invalid file names (who puts ":" in folder names? they should be shot), and I don't know specifically what to pull, I was just going to get everything put back what I found was missing that I needed. There's no room to do a backup onto the device, and since the N10 has to sd/microsd, well... Useless options are useless.
Is there anyway to just do a proper backup with TWRP over USB? Or is the "recovery" mode as useless as I think it is when it comes to backups? (I'm aware I can get the tablet back to working order if I disregard the data on it, this is a question about backing things up before doing so)
Edit: Also, I have a pro version of SkipSoft ToolKit, but unless you can actually load into the OS the toolkit can't do anything at all.
Just really frustrated with the lack of doing something as basic as copying files from one place to another. Been messing with this all morning.
Click to expand...
Click to collapse
Do you still need help? What about mtp mounting? You can pull * for a whole folder
Why not adb sideload a new rom?
I don't think I can MTP mount a Nexus 10, at least not in recovery mode. What I ended up doing was buying a OTG usb drive and making a backup to that. Problem was it split the tar over 4 files, which corrupted them (or at least made them not work with 7zip or tartool) fortunately I was able to get them to work with cygwin enough to get the files I wanted. I didn't want to sideload a new rom until I had backed up certain application data just in case it removed it.
All in all, had to buy a OTG usb drive (I would have just bought a cable but all the stores around here had was this "Dane 16gb OTG drive". So 20 bucks later I had the files I needed. Still annoyed that you can't do a ADB backup from fastboot or recovery mode, it seems like those would be the best places because no system files are in use, but who knows maybe the developers know something I don't.
In summary:
TWRP recovery cannot confirm a ADB backup over USB. ADB backups can only be done from the operating system.
TWRP recovery mode can only backup to OTG (if your device supports it, Nexus 10 does), but if the backup is larger than 2gb it will split the file and you will need some form of linux to extract it.
ADB cannot copy every file in recovery mode over USB due to certain file names being invalid for NTFS (this is probably not a problem on other file system types), this is problematic since the "pull" command has no skip option, it just fails when it hits one of these files.
Well you can easily flash latest rwrp that does well on my Linux mount internal storage but another solution is just flashing a rom with abd sideload and the'the back up from pc the content
---------- Post added at 04:24 AM ---------- Previous post was at 04:23 AM ----------
Or that will just un brick your tablet
Diet6 said:
Still annoyed that you can't do a ADB backup from fastboot or recovery mode
Click to expand...
Click to collapse
adb doesn't work in fastboot mode, only recovery or Android itself.
Diet6 said:
In summary:
TWRP recovery cannot confirm a ADB backup over USB. ADB backups can only be done from the operating system.
Click to expand...
Click to collapse
Maybe because /data (not talking about /data/media) wasn't mounted?
Diet6 said:
TWRP recovery mode can only backup to OTG
Click to expand...
Click to collapse
Huh?
Diet6 said:
ADB cannot copy every file in recovery mode over USB due to certain file names being invalid for NTFS (this is probably not a problem on other file system types), this is problematic since the "pull" command has no skip option, it just fails when it hits one of these files.
Click to expand...
Click to collapse
That's NTFS' problem, not TWRP's.
beekay201 said:
1. adb doesn't work in fastboot mode, only recovery or Android itself.
2. Maybe because /data (not talking about /data/media) wasn't mounted?
3. Huh?
4. That's NTFS' problem, not TWRP's.
Click to expand...
Click to collapse
1. I was just covering that you can't actually do a ADB backup unless you have access to android OS, in case anyone else came across this. (I didn't know when I started, and it took awhile to find it said concretely anywhere)
2. I made sure everything was mounted, the issue is when you send a backup command over ADB it says the "Now unlock your device and confirm the backup operation" message in terminal which you can't do from recovery mode on the device, thus you cannot do a ADB backup command over TWRP (or other recovery modes I'd imagine).
3. I should have been more specific. TWRP can do a backup to the device itself (built in storage), SD card (if your device has one and you mount it), or a OTG (on the go) device via usb directly to media like a flash drive. It cannot issue a backup over USB to a computer.
4. Completely agree it's a NTFS issue, but it could be mostly avoided by allowing files that error to be skipped or renamed rather than terminating the process. (I understand that's on the android devs since pull is made by them, and I doubt they would care to improve the command for a file system I doubt they use). Again I mostly included that so if anyone else is trying to figure it out they can stop looking for "a way" and just accept it can't be done.
Ultimately Khaon is right in that sideloading a rom would have unbricked it and I could have done the ADB backup then, I just wasn't sure how that might affect the app data storage so I was looking for a way to back it up before doing that.
Diet6 said:
1. I was just covering that you can't actually do a ADB backup unless you have access to android OS, in case anyone else came across this. (I didn't know when I started, and it took awhile to find it said concretely anywhere)
2. I made sure everything was mounted, the issue is when you send a backup command over ADB it says the "Now unlock your device and confirm the backup operation" message in terminal which you can't do from recovery mode on the device, thus you cannot do a ADB backup command over TWRP (or other recovery modes I'd imagine).
3. I should have been more specific. TWRP can do a backup to the device itself (built in storage), SD card (if your device has one and you mount it), or a OTG (on the go) device via usb directly to media like a flash drive. It cannot issue a backup over USB to a computer.
4. Completely agree it's a NTFS issue, but it could be mostly avoided by allowing files that error to be skipped or renamed rather than terminating the process. (I understand that's on the android devs since pull is made by them, and I doubt they would care to improve the command for a file system I doubt they use). Again I mostly included that so if anyone else is trying to figure it out they can stop looking for "a way" and just accept it can't be done.
Ultimately Khaon is right in that sideloading a rom would have unbricked it and I could have done the ADB backup then, I just wasn't sure how that might affect the app data storage so I was looking for a way to back it up before doing that.
Click to expand...
Click to collapse
I'd just 'tar' what I wanted on the device and then pull that with adb.
Yeah, I just had no idea what I wanted. I'm not 100% familiar with how the system stores application data, I figured if I copy everything than anything I "miss" after I formated it I'll be able to just research where it was and dig in the backup and pull it out.
Yeah adb sideload a rom will only affect system partition thus your data would not have been modified in any way. So you are done with your issue?
Sent from my Xiaomi MI2s
Khaon said:
Yeah adb sideload a rom will only affect system partition thus your data would not have been modified in any way. So you are done with your issue?
Sent from my Xiaomi MI2s
Click to expand...
Click to collapse
Yes, sorry for the slow reply. I've completed my update, just wanted to follow up on everything I did incase the information is useful for anyone else new to this like I am.
Code:
/*
*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
IMPORTANT: Read the ENTIRE instructions set before starting, make sure you know what you are getting into. I have been as straight forward as possible with my instructions to assist noobs with the procedure.
Mission Statement
The purpose of this post is to combine the following 4 guides, in an easy to read manner to help people get from a stock Note 4 Version running 6.0.1 to a fully rooted Note 4 running CM13.0
Guides Referenced and Summarized:
[Guide] A noob's guide to Perm Root & TWRP on Verizon Note 4 Retail 5.1.1 (BPA1) http://forum.xda-developers.com/note-4-verizon/general/guide-noobs-guide-to-perm-root-twrp-t3360883
[HOWTO] Bootloader Unlock and Upgrade to Marshmallow [N910V] http://forum.xda-developers.com/not...t/howto-bootloader-unlock-upgrade-to-t3398144
(no title, sub post #1403, describes going from CPD1 to Jasmine with CPF3 and Firmware/Kernel Patch) http://forum.xda-developers.com/showpost.php?p=67481370&postcount=1403
[ROM] [6.0.1] [UNOFFICIAL] CyanogenMod 13.0 [Jul 24, 2016] http://forum.xda-developers.com/note-4-verizon/development/cyanogenmod-t3253973
I will use large chunks from some of these guides, skip some parts not necessary and/or extrapolate/modify on the instructions given within.
Thankx & Achnologments
Main Contributors (I plagiarized, quoted, or sourced)
Robots_Never_Die
hsbadr
Tech Support
BickNasty
Feel like I missed you, it wasn't intentional....PM me and I'll consider adding you, if I feel you actually contributed in some way or I copied your work.
Satisfied Customers (Did my method work for you? Post a reply and let us know, I'll add you to the list)
jwp1299 - 1 hour
Viper-Link
keviinese - 1.5 hours
pfcland - 1.5 hours
Required Apps (Google Play) All Free
Search for and install these apps
eMMC Brickbug Check (free)
Required Downloads (note on version numbers: version numbers I specify are ones available at the time I wrote this guide. For most tool grab the newest version, such as Odin/ADB)
NOTICE Total size of Downloads is approximately 7 GB, some of the links may be slow! Time required may vary due to your network speeds, and luck with speeds from file hosts. (expect several hours)
ADB – minimal_adb_fastboot_v1.4.0_setup.exe
Odin - newest version (3.12.3 at time of writing)
Kingroot - Grab latest stable version, only grab NewKingroot(XXXXX).apk
Samsung USB drivers (windows) - newest version
Bootloader Unlock - samsung_unlock_n4-fix
TWRP - twrp-3.0.2-0-trltevzw.tar.md5
N910VVRU2BPA1_N910VVZW2BPA1_VZW.tar.md5
N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 (Alternate Torrent if slow: Torrent started by pfcland)
JasmineROM_v7.0_N910VVRU2CPF3.7z
N910VVRU2CPF3_PartialFirmware_PatechedKernel.tar.m d5.7z
Gapps For ARM SDK23 (Android 6.0) (mini version is recommended)
UNOFFICIAL CyanogenMod 13.0 Builds for Verizon Samsung Galaxy Note 4 (SM-N910V) (grab newest from top)
Xposed framework for ARM SDK 23 (NOTE: Grab both the xposed23.zip and XposedInstaller****.apk)
XPosed is OPTIONAL, but there are a lot of rooted apps that use the XPosed framework to get more control over your phone. Such as hiding mock locations for example.
NOTE: Internet is REQUIRED for KingRoot to function (grants temporary root, so ADP commands can be executed to unlock bootloader), at one point WiFi will NOT function but internet is still required. So a valid SIM with internet is required (Verizon will definitely work, others might[/] work)
NOTE: The entire installation will take an estimated 1-2 hours. (Not including time spent downloading) All steps are MANDATORY, do not SKIP anything....You've been warned
Install eMMC Brickbug Check (free) on your phone, and RUN IT. Your CID MUST start with 15. If it doesn't I can't help you, and this guide is not for you.
Install the Samsung USB drivers on your windows PC
Backup your phone, if you don't know how.....google it...And learn how, you will want to backup frequently. Every time you get to a point you can boot up into Android, backup...it's safer for you...I will not remind you again, this is on your head.
Disable Encryption on your phone, both the SD card and Device
Disable Samsung Phone Lockout. YOU MUST DO THIS OR ELSE!!!! (Settings > Security > Reactivation Lock)
Do 2 factory resets on your phone, one after another (hold volume up, home button, power when starting to enter recovery mode where you can reset phone). Not required but if you don't, you'll spend an extra hour or two doing this because Kingroot will crash/fail more often.
Boot up your phone in Download Mode (hold volume down, home button, power)
Open Odin3, Click the AP button and select the file N910VVRU2BPA1_N910VVZW2BPA1_VZW.tar.md5, once it checks it, goto options and make sure the Re-Partition is NOT selected. Now click start to flash and downgrade to Android 5.1.1.
Turn on your phone, and let it boot up.
Skip everything possible when setting up your phone. Don't even put in a google account, not necessary
Goto Setings and set the following
Settings > Security > Reactivation Lock = Disabled (EXTREMELY IMPORTANT, VERIFY)
Settings > Security > Unkown Sources = Enabled
Settings > Developer Options > USB debugging = Enabled
Developer options are unlocked by going to Settings > About Phone. Find "Build Number", and start clicking it till you get a message that Developer Options have been unlocked (about 10 clicks I believe, never counted).
Settings > Developer Options > Verify App via USB = Enabled (should be by default, CHECK)
Settings > Lock Screen = None
Settings > Display > Turn off Display = 10 Minutes
Plug your phone into your computer via USB, copy the NewKingroot****.apk to your download directory (samsung-sm-N910V\Phone\Download)
Install ADB onto your Windows PC. Select an easy directory such as c:\ADB
Copy the following file directly into the ADB directory
samsung_unlock_n4-fix
Open up command line interface. Hold windows key & press R key for run, type in "cmd" press enter. Will open a terminal window for you. Type the following commands:
cd\
cd adb (or whatever you named your directory where you installed ADB)
adb devices
This should return a list of devices you have connected, something like:
Code:
List of devices attached
SerialNum device
If no devices are displayed, check you have the Samsung USB drivers installed properly.
Type the following command
adb push samsung_unlock_n4-fix /data/local/tmp/
Got an error? check your spelling (or copy/paste from me), check you put the file into the ADB directory (not just a link), your phone must be on and screen not locked and check you have usb debugging enabled.
BTW: Do NOT CLOSE the window unless I instruct you to!
Install Kingroot on your phone, which you previously moved into your downloads folder, you can find it via My Files app that comes with phone.
Now run KingRoot. Flip down to the bottom and click "Try It", it will run some quick test then give you a button to try to root your phone.
Wait...Wait...Do not worry if your phone restarts, it will go back into KingRoot automatically on reboot. Just sit back and wait, it may fail multiple times and you may have to re-run Kingroot. Just keep trying . Once it succeeds you must do the following IMMEDIATELY AND AS FAST AS POSSIBLE. Kingroot is HIGHLY UNSTABLE.
On the windows PC, back in the command window you left open. Start Typing.
adb shell
su
cd /data/local/tmp/
chmod 777 samsung_unlock_n4-fix
chown root.root samsung_unlock_n4-fix
./samsung_unlock_n4-fix
After the last command it may prompt you to type yes, do so immediately. it won't write on the screen but type yes anyway for it to continue. Once it's done it should automatically start to reboot your phone. Unplug it and pull the battery, wait 5 seconds, put battery back in and plug the phone back in.
This was the initial setup for unlocking your bootloader, you now have to run it AGAIN so turn your phone back on. Repeat steps 22-24, after the 2nd time PULL OUT YOUR SD CARD BEFORE TURNING ON YOUR PHONE
Congratulations you now have an unlocked bootloader, you can close the command window on your PC.
The SD card has a restore point for your phone prior to removing your bootlock. Save it if you want, or plug into your phone and format the 18mb partition you are able to. You must format it on a PC before you can use it again in a phone!!!! Will shut your phone off immediately if you put the SD in without formatting that 18mb partition.
Now reboot your phone into download mode (hold volume down, home and power buttons when turning on)
Open Odin App on your PC, Click the "AP" button and select the file twrp-3.0.2-0-trltevzw.tar.md5 (which you downloaded earlier). Once it does it's check, verify that re-partition is NOT selected in options. Now click start to flash twrp bootloader.
Your phone will restart, re-enter download mode. If you missed it pull cable/battery and try again.
Now extract and flash N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5 via Odin, same as you did with twrp. VERIFY THAT RE-PARTITION IS NOT SELECTED IN OPTIONS.
Boot up in recovery mode (hold volume up, home and power when turning on) (note: no longer TWRP since you flashed firmware, will look different again)
"Wipe data/factory reset ", then reboot your phone.
Now repeat steps 9-12 (NewKingRoot should still be in your downloads, but verify anyway) (NOTICE: wifi will NOT work with the CPD1 firmware, but Verizon internet should in case you need internet for some reason, wifi will restore later in guide - Other internet from other providers MIGHT work with proper APN settings)
Install a clean SD card into the phone.
Now repeat steps 15-25. This time you should only need to run the samsung_unlock_n4-fix file once to break your boot. This is what it typically says on successful bootloader unlock: (if you got this message, pull the battery, cable and SD card.)
Code:
[email protected]:/ # cd /data/local/tmp/
[email protected]:/ # chmod 777 samsung_unlock_n4-fix <
[email protected]:/ # ./samsung_unlock_n4-fix
============================== samdunk unlock 0.0.1 ==============================
NOTE 3 BETA UNLOCK!!!!!!!!!!!!!
this application comes with NO WARRANTY (express or implied)
this binary may not be rehosted, repackaged, one-clicked, etc.
there is no support provided for this application
this application has been tested on the Verizon Galaxy S5 only
it may work on the AT&T Galaxy S5, and possibly other similar Galaxy devices
there are no compatibility checks, do your research first
if run on an incompatible phone, it will likely permanently ruin the device
we STRONGLY advise against running any binary not obtained from the official source
official source is available at http://github.com/beaups/SamsungCID
SD card is required, all data on the SD card will be destroyed
changing to this developer CID may have other implications
the psn derived from the CID may be used for critical services
changing this psn may cause unexpected behavior or loss of services
continue at your own risk, you've been warned
aboot dev signature research credit to ryanbg
http://forum.xda-developers.com/member.php?u=766721
eMMC vulnerability, exploit, and the code you are running by beaups (sean beaupre)
http://forum.xda-developers.com/member.php?u=711482
Do you understand the implications of these warnings?
(Yes/No)
[+] CID at boot time is/was: 150100523231384d4100657e54fc1200
[+] dev CID matching, proceeding to unlock
[+] backing up loaders, this will take a few minutes
[+] loaders successfully backed up
[+] success! powering off device, hopefully its not bricked!
Now boot back into download mode
Flash TWRP via Odin again (I'm summarizing greatly now, as you should by now understand this kind of shorthand)
Ok, now boot up into TWRP recovery mode (vol up, home, power)
Navigate through TWRP menus to create a Backup. Click Backup Button, and swipe to create backup. (this is just so that it creates the directory structure on your phone)
Click the Reboot System button, skip all the setup you can again. (DO NOT INSTALL SUPERSU!!! will cause bootloop)
Extract the "JasmineROM_v7.0_N910VVRU2CPF3.7z" file it will create a directory called "JasmineROM_v7.0_N910VVRU2CPF3".
Plug USB into phone and to computer. Copy the JasmineROM_v7.0_N910VVRU2CPF3 folder into \Internal storage\TWRP\BACKUPS\Phone SN\
Reboot into TWRP recovery
Click the Restore button (DONT start the restore yet!!!), and check that your JasmineROM is listed as a recovery option. (don't recover YET) If it's not there you copied it into the wrong directy, try again before proceeding.
Go back to the main menu, Click the Wipe button. Click the 'Advanced Wipe' button, and wipe the following cache/dalvik/system/data
Go back to Restore (from 2 steps ago) and run the JasmineROM_v7.0_N910VVRU2CPF3 recovery, return to main menu afterwards
Go to wipe, and wipe the cache/dalvik only this time.
Reboot into download mode
Flash the N910VVRU2CPF3_PartialFirmware_PatechedKernel.tar.m d5.7z file via Odin
Reboot the system, this will take a LONG TIME. WAIT for it. (if reboot takes >10 min, pull battery and restart)
Once it boots up, skip all the setup again. Copy the CM13, Gapps and XPosed (both zip and apk) to your downloads. Don't unzip anything, not necessary.
Now reboot into recovery go to WIPE and do a factory reset by swiping.
Then goto Install (still in recovery) and install CM13, then Install Gapps.
Reboot your phone, this time you are setting up properly reboot will take a while to optimize your apps depending on Gapps version used. So do all your setup as you want your phone setup. Once that's done, restart the phone in recovery. (if reboot takes > 5 min, pull battery and restart)
Install via TWRP the XPossed.zip file.
Reboot your phone, once on. Navigate via My Files, to downloads and install XPosed.apk
CONGRATULATIONS. You now have a fully Unlocked, Rooted Note 4 Verizon with CryanogenMod 13.0 installed and XPosed Installed.
Suggested Apps
Kernel Auditor [ROOT], will allow you to adjust kernel settings. Such as CPU clock speeds and thermal throttling, if your phone is too hot.
Note: About ROOT[/], you will have root once you finish this guide. But it is disabled by default, you can enable root in developer options (no reboot required when changing). Unlock your developer options again, and scroll down you will see an option to enable/disable root. This allows you to keep turn off during normal use, and only enable it when you need to install an app that requires root. You can always just leave it on all the time, that is your choice.
Note: Some apps on Google PlayStore will become unavailable due to incompatibility (according to google, HA). Such as YouTube Music, you will no longer be able to install it through the store. But you can install it by using an APK site, such as APK Downloader. On this site you find the app you want on play.google.com, copy the HTTP link and put it into the APK Downloader and it will generate a direct download link to the APK file. Copy onto your phone and sideload (ie. install) through file explorer. I don't endorse them, they are just one of many places you can get APK files.
Change Log
7/28/2016
Another success story :good:
Added note about how root works in CM 13.0
Corrected Step 34
Minor text adjustments, for clarification
Made note that wifi doesn't work with CDP1 flash
Added note that you MUST HAVE a valid sim card with internet access for step 35! KingRoot requires internet to function, and Wifi will NOT WORK after flashing CPD1 firmware (incomparable drivers).
Added another note about internet at the top of the instructions, to make sure people are aware.
7/27/2016
Added Bicknasty to the Contributors list - helped resolve issues I had with CM 13.0 kernel & modem.
Added a note to downloads section regarding total size of files downloaded and expected time.
Re-wrote steps 40-48 to make it easier to understand. Adding some steps and explaining in more detail.
Added note at the top to read ALL the instructions once before starting
Added note with the estimated time to perform all the steps
Added note suggesting Kernel Auditor app, and made reference to the fact that some apps on playstore will NOT install from playstore. Suggested APK Downloader for apps not available from store
Added a Success Story Section
Added note on how to enable developer options
Any faster source for N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5
jwp1299 said:
Any faster source for N910VVRU2BPA1_N910VVRU2CPD1_FullFirmware.tar.md5
Click to expand...
Click to collapse
Probably, but that's the only one I know which is a free download that I'd trust.
JacekRing said:
Probably, but that's the only one I know which is a free download that I'd trust.
Click to expand...
Click to collapse
Alright, still works just a little long. Thanks so much for the guide, working great so far!
jwp1299 said:
Alright, still works just a little long. Thanks so much for the guide, working great so far!
Click to expand...
Click to collapse
How far are you now?
And let me know when you finish, critique my guide. If parts weren't clear enough let me know.
And finally if you run into any issues let me know.
Great guide (I honestly haven't read it, it's too long but it looks thorough, and I know you were annoyed with the tedious process), glad I was able to help you figure things out!
Bicknasty said:
Great guide (I honestly haven't read it, it's too long but it looks thorough, and I know you were annoyed with the tedious process), glad I was able to help you figure things out!
Click to expand...
Click to collapse
Yea I do appreciate the help Bicknasty. I'll add you to contributors list later as helping with cyanogen issues I was having.
Bicknasty said:
Great guide (I honestly haven't read it, it's too long but it looks thorough, and I know you were annoyed with the tedious process), glad I was able to help you figure things out!
Click to expand...
Click to collapse
You know it wasn't so much that it annoyed me it's that there was no concrete guide telling me what to do. It's a thread here, a post there to do a specific thing but they aren't coordinated in a logical way for users to easily find.
Alright ignore what I said before this edit, I just skipped a step.
I must say though, steps 41-43 are very confusing. What is the ROM folder?
jwp1299 said:
Alright ignore what I said before this edit, I just skipped a step.
I must say though, steps 41-43 are very confusing. What is the ROM folder?
Click to expand...
Click to collapse
The ROM folder I'm referring too is the folder inside the Jasmine zip file. I only reference it so people wouldn't try to take just the files inside the folder which is inside the zip file. Lol yea that's confusing....I'll think about how to rewrite those and make adjustments in a couple hours to make it clearer.
But basically when you extract the Jasmine zip file it creates a folder with files in it. Copy the whole folder not just the files to where it makes your recovery folders.
JacekRing said:
The ROM folder I'm referring too is the folder inside the Jasmine zip file. I only reference it so people wouldn't try to take just the files inside the folder which is inside the zip file. Lol yea that's confusing....I'll think about how to rewrite those and make adjustments in a couple hours to make it clearer.
But basically when you extract the Jasmine zip file it creates a folder with files in it. Copy the whole folder not just the files to where it makes your recovery folders.
Click to expand...
Click to collapse
Okay, awesome. Also I think the TWRP part could be explained a little clearer.
Other than that, 100%
oh also, at the start I would say to read the entire thing before starting, and give a warning that downloads will take like 4 hrs
jwp1299 said:
Okay, awesome. Also I think the TWRP part could be explained a little clearer.
Other than that, 100%
oh also, at the start I would say to read the entire thing before starting, and give a warning that downloads will take like 4 hrs
Click to expand...
Click to collapse
Lol yea, didn't think to mention reading the whole thing first. To me that's a given I always read everything before starting. I'll add a note to read everything.
As to download time, well it is like what 12 gigs in total? Basically 4 full versions of the Android OS at 2 gigs reach plus all the extras.
I'll try to see if I can't explain the twrp recovery of Jasmine better. Only reason you need to do Jasmine is for the 6.0.1 device drivers (such as modem).
jwp1299 said:
Okay, awesome. Also I think the TWRP part could be explained a little clearer.
Other than that, 100%
oh also, at the start I would say to read the entire thing before starting, and give a warning that downloads will take like 4 hrs
Click to expand...
Click to collapse
I've modified the guide appropriately, to resolve all of the issues (I think) you mentioned. And to make some steps easier to understand and follow.
I also added a recommended app on the bottom, and mentioned a site you can use to get PlayStore apps which will now list as incompatible with our phones.
Finally, question: Did you succeed using this Guide? Just curious if everything is working as expected after following my guide. I wrote the thing from memory, after spending 3 days rooting my phone and figuring everything out from various sources. Hopefully this saves people some time where they don't have to piece a dozen sources together to figure out how to do it. I only mentioned the main 4 I referenced, but there were other lessons learned from various places that aren't covered in those posts.
JacekRing said:
I've modified the guide appropriately, to resolve all of the issues (I think) you mentioned. And to make some steps easier to understand and follow.
I also added a recommended app on the bottom, and mentioned a site you can use to get PlayStore apps which will now list as incompatible with our phones.
Finally, question: Did you succeed using this Guide? Just curious if everything is working as expected after following my guide. I wrote the thing from memory, after spending 3 days rooting my phone and figuring everything out from various sources. Hopefully this saves people some time where they don't have to piece a dozen sources together to figure out how to do it. I only mentioned the main 4 I referenced, but there were other lessons learned from various places that aren't covered in those posts.
Click to expand...
Click to collapse
I was quite successful with the root. Even though I messed up a few times (skipping steps), it all works out and now it's working lovely. It only took an hour of actual work, plus a lot of download time because of slow hosts.
Thanks so much for the guide, the only issue was with the slow hosts, and that's hardly your fault. I do wonder if maybe setting up a torrent of the heavier files might help though.
Edit: I will say, this is a wonderfully tedious root effort.
jwp1299 said:
I was quite successful with the root. Even though I messed up a few times (skipping steps), it all works out and now it's working lovely. It only took an hour of actual work, plus a lot of download time because of slow hosts.
Thanks so much for the guide, the only issue was with the slow hosts, and that's hardly your fault. I do wonder if maybe setting up a torrent of the heavier files might help though.
Edit: I will say, this is a wonderfully tedious root effort.
Click to expand...
Click to collapse
An hour..........I spent 2 hours watching kingroot try and root my damb phone, LOL because I didn't wipe before trying to get temporary root the first time you use it (before I read in a post that wiping twice will make it MUCH more successful). Took me 10+ hours of actual work to get my phone rooted and CM 13.0 setup, because I didn't have steps to follow, LMAO. Made it up as I went.
As to the Torrent, I'd be the only one sharing and my upload speeds are not that great. maybe 500 kbps, I live in a rural area. At least my download speed is 40 mbps.
And it is hellofa tedious root for the Note 4, I haven't seen any other phone as crazy tedious to root.
Edit: Mind if I add a 'success story' section and add you to it?
JacekRing said:
An hour..........I spent 2 hours watching kingroot try and root my damb phone, LOL because I didn't wipe before trying to get temporary root the first time you use it (before I read in a post that wiping twice will make it MUCH more successful). Took me 10+ hours of actual work to get my phone rooted and CM 13.0 setup, because I didn't have steps to follow, LMAO. Made it up as I went.
As to the Torrent, I'd be the only one sharing and my upload speeds are not that great. maybe 500 kbps, I live in a rural area. At least my download speed is 40 mbps.
And it is hellofa tedious root for the Note 4, I haven't seen any other phone as crazy tedious to root.
Edit: Mind if I add a 'success story' section and add you to it?
Click to expand...
Click to collapse
Oh of course, go ahead and add me.
Also, if you do end up making a torrent, i'd be happy to help seed at least for a while. I have pretty good upload and no data caps or anything so it would probably help a bit (anything is faster than that 100 kbps that xda was giving)
You called N910VVRU2BPA1_N910VVZW2BPA1_VZW.zip, "N910VVRU2BPA1 Full Firmware". Which kinda got me confused, (maybe its just me trying to do this at 1 am >_>) but might want to edit that. Other then that Iv'e had a pretty easy time following this guide. Thanks! (still doing it fyi, I got an infinite bootloop, so figured I messed up somewhere after reflashing TWRP, now im starting from scratch.)
I have a Very weird problem , I followed your instructions correctly i was on step 25 did exactly what you said pulled the unpluged the USB and pulled the battery and and waited 5 seconds and put the battery back in and rebooted the phone only problem is now it is stuck in a boot loop of the image Samsung galaxy note 4 and just keeps rebooting . I haved tryed doing a factory reset and wiping cache and reinstalling 5.1..1 via odin and it is still doing the boot loop i am not sure what i did wrong or what to do . I know its not hard brick because i can get into recovery and download but just wont boot the past the Samsung not 4 logo
---------- Post added at 05:05 AM ---------- Previous post was at 04:57 AM ----------
Ok so i went and wiped and factory rest like 10 times and now it got past the screen So that is a relief lol
Viper-Link said:
You called N910VVRU2BPA1_N910VVZW2BPA1_VZW.zip, "N910VVRU2BPA1 Full Firmware". Which kinda got me confused, (maybe its just me trying to do this at 1 am >_>) but might want to edit that. Other then that Iv'e had a pretty easy time following this guide. Thanks! (still doing it fyi, I got an infinite bootloop, so figured I messed up somewhere after reflashing TWRP, now im starting from scratch.)
Click to expand...
Click to collapse
Not sure what to tell you viper as not enough info. Hope you figured it out...
pfcland said:
I have a Very weird problem , I followed your instructions correctly i was on step 25 did exactly what you said pulled the unpluged the USB and pulled the battery and and waited 5 seconds and put the battery back in and rebooted the phone only problem is now it is stuck in a boot loop of the image Samsung galaxy note 4 and just keeps rebooting . I haved tryed doing a factory reset and wiping cache and reinstalling 5.1..1 via odin and it is still doing the boot loop i am not sure what i did wrong or what to do . I know its not hard brick because i can get into recovery and download but just wont boot the past the Samsung not 4 logo
---------- Post added at 05:05 AM ---------- Previous post was at 04:57 AM ----------
Ok so i went and wiped and factory rest like 10 times and now it got past the screen So that is a relief lol
Click to expand...
Click to collapse
Was this after the first time you inputted the adb commands our second? Make sure you pull the SD card after the second time, as it will cause reboots after the second time until you reformat the SD card on your PC. Size will be wrong on PC but size will fix when you reformat the SD card a second time on your phone.
Edit it creates like 20 partitions on the ad card when you do adb, it creates a backup of your phone os.
Hello, ladies and lads!
Here's a short version of where I'm at: after installing Wondershare' s dr.phone Recovery on my mom's PC and using it on her phone:
its screen won't respond to touch (can't enter SIM card's PIN nor open screen lock)
the On/Off button won't turn off the phone on long press (maybe due to screen lock)
on restart there's a yellow text that reads "Set Warranty Bit : kernel"
the physical buttons still work
I can see the phone's files and folders only through PC's command prompt, using ADB ('This PC\Galaxy Grand Prime' folder in Win Explorer says it's empty).
Ideally I want to keep her data (FB Messenger, Skype, Chrome, WiFi passwords, etc), and her phone to function again. What do you think I should do?
I think I need an advice and suggestions from someone more experienced than me - I don't even know trusted sites where to download the firmware roms from.
The phone's details are (I'm afraid you'll have to walk me through to get more details to this list, as I'm new to the forum):
Phone: Samsung Grand Prime
Model name: SM-G530FZ
Firmware version: G530FZXXS1BQC2 (Android 5.0.2 with Baltic bloatware, I guess)
Now in detail:
My knowledge and experience regarding the smartphone software & restoration is very basic (I've only restored the firmware to a LG-L70 once some years ago, and that's it).
Before the problem I lost some over 600 media files from that phone by Cutting and Pasting a folder from phone's internal SD to PC's disc. Now I learned never to Cut-Paste important or irreplaceable files. The files ended up on the phone, because a folder with over 800 files couldn't be uploaded to the Google Drive (the camera's folder had over 1k files in it, so I moved some of them to another folder, which the phone created on the internal partition rather than the SD Card, where the original folder was from).
Instead of using a trusted software, I foolishly Googled a photo recovery program for phones, using my mom's PC. A list of bogus recovery program sites appeared (had to look them up on her PC, as I found only legit, widely trusted programs now, using my laptop. Those darn Google's personalized search result algorithms!).
Before using the dr.fone Recovery software I synced most of the data to her account.
Used the "free" dr.fone Recovery software as per its site's instructions, the phone did a restart and the touchscreen went unresponsive to touch. Later the software showed the lost files it found, and offered to restore them for a sum. Naturally I declined.
The software said that to return the phone to normal I need to disconnect the USB cable. I did so, but the phone's screen remained unresponsive to touch, even after restart (long-press [Pow] + [Vol-]).
I tried connecting an USB mouse via the dongle, but the mouse cursor didn't appear (maybe this phone doesn't have this functionality).
Now, after using that FAIL-covery program, I was overly cautious not to make things even worse.
I wanted to make a copy of the phone's internal SD state (or is it called a phone's hard drive?), to get the media files from the clone and to have a backup of mom's files.
But I failed: I downloaded APK, ncat, KingoRoot and BusyBox. Tried to follow the steps in this video: youtu[dot]be/KKkvkCgMeMA. Got stuck at "busybox not found" at about 10:27 mark in that video ("dd if=/dev/block/mmcblk0" "busybox nc -l -p 8888"). Turns out you need to run some of the apps from that phone prior to that step, and I don't know any workarounds.
Then I remembered that the files were on the external SD in the first place. Well duh! I then connected the Micro SD card to PC's reader via a Micro SD adapter. To make a copy of the SD card's 1s & 0s, and to restore the media files from said copy I used ZAR (Zero Assumption Recovery) z-a-recovery[dot]com/. The backup creation (an .ISO file or some such) and media recovery are free of charge.
Now I only need to remove duplicates and blurry pics (I think I had a Moleskinsoft's Clone Remover from an old PC magazine's CD lying around somewhere for the latter). Oh, and I better not forget to run a malware scanner on her PC and remove the mr.fone installed services and folders from it. Went a bit off-topic here, sorry!
Last I pulled a wifi passwords file with "adb pull /data/misc/wifi/wpa_supplicant.conf" command as per instructions on this page: mashtips[dot]com/see-wifi-password-android/. I don't know whether putting the file back on that phone will do the trick or not.
That's pretty much all.
I hope the situation can be resolved and I appreciate your input! :fingers-crossed: Maybe someone has come across a similar post, has constructive commentary or knows something obvious that I haven't come up with? Thank you in advance!
Edit 30 Jan '19: Got the phone working. Accessed the phone with a Chrome browser extension (name here). All accounts except some mail account were gone. WiFi didn't work.
Found a stock ROM here: (address here).
Found the Odin3 tool here: (address here). It came with a different locale ROM.
Flashed the 1st ROM with Odin. The screen started to work.
Flashed the 1st ROM with Odin again. The WiFi started working.
I'll update this with links soon.
I've got the exact same problem after using Dr Fone app!
Hi there.
I've got the same problem with my Samsung Galaxy Grand Prime after using Dr Fone, like you. I contacted Wondershare website from which I downloaded the app but they haven't bothered replying. Not happy at all!!
I contacted Samsung's support team and after trying different things (the usual stuff: reboot; remove the battery and SIM card; restart in Safe Mode; etc) which didn't solve the problem, they ended up telling me to reset the phone to the factory settings but that didn't work either.
Now my phone is stuck on the Samsung Galaxy Welcome screen which asks me to choose the language I want on my phone. The touchscreen is still unresponsive.
How did you manage to fix the problem if the touchscreen was unresponsive?
Thanks in advance for your help!
Your-Mum said:
Hello, ladies and lads!
Here's a short version of where I'm at: after installing Wondershare' s dr.phone Recovery on my mom's PC and using it on her phone:
its screen won't respond to touch (can't enter SIM card's PIN nor open screen lock)
the On/Off button won't turn off the phone on long press (maybe due to screen lock)
on restart there's a yellow text that reads "Set Warranty Bit : kernel"
the physical buttons still work
I can see the phone's files and folders only through PC's command prompt, using ADB ('This PC\Galaxy Grand Prime' folder in Win Explorer says it's empty).
Ideally I want to keep her data (FB Messenger, Skype, Chrome, WiFi passwords, etc), and her phone to function again. What do you think I should do?
I think I need an advice and suggestions from someone more experienced than me - I don't even know trusted sites where to download the firmware roms from.
The phone's details are (I'm afraid you'll have to walk me through to get more details to this list, as I'm new to the forum):
Phone: Samsung Grand Prime
Model name: SM-G530FZ
Firmware version: G530FZXXS1BQC2 (Android 5.0.2 with Baltic bloatware, I guess)
Now in detail:
My knowledge and experience regarding the smartphone software & restoration is very basic (I've only restored the firmware to a LG-L70 once some years ago, and that's it).
Before the problem I lost some over 600 media files from that phone by Cutting and Pasting a folder from phone's internal SD to PC's disc. Now I learned never to Cut-Paste important or irreplaceable files. The files ended up on the phone, because a folder with over 800 files couldn't be uploaded to the Google Drive (the camera's folder had over 1k files in it, so I moved some of them to another folder, which the phone created on the internal partition rather than the SD Card, where the original folder was from).
Instead of using a trusted software, I foolishly Googled a photo recovery program for phones, using my mom's PC. A list of bogus recovery program sites appeared (had to look them up on her PC, as I found only legit, widely trusted programs now, using my laptop. Those darn Google's personalized search result algorithms!).
Before using the dr.fone Recovery software I synced most of the data to her account.
Used the "free" dr.fone Recovery software as per its site's instructions, the phone did a restart and the touchscreen went unresponsive to touch. Later the software showed the lost files it found, and offered to restore them for a sum. Naturally I declined.
The software said that to return the phone to normal I need to disconnect the USB cable. I did so, but the phone's screen remained unresponsive to touch, even after restart (long-press [Pow] + [Vol-]).
I tried connecting an USB mouse via the dongle, but the mouse cursor didn't appear (maybe this phone doesn't have this functionality).
Now, after using that FAIL-covery program, I was overly cautious not to make things even worse.
I wanted to make a copy of the phone's internal SD state (or is it called a phone's hard drive?), to get the media files from the clone and to have a backup of mom's files.
But I failed: I downloaded APK, ncat, KingoRoot and BusyBox. Tried to follow the steps in this video: youtu[dot]be/KKkvkCgMeMA. Got stuck at "busybox not found" at about 10:27 mark in that video ("dd if=/dev/block/mmcblk0" "busybox nc -l -p 8888"). Turns out you need to run some of the apps from that phone prior to that step, and I don't know any workarounds.
Then I remembered that the files were on the external SD in the first place. Well duh! I then connected the Micro SD card to PC's reader via a Micro SD adapter. To make a copy of the SD card's 1s & 0s, and to restore the media files from said copy I used ZAR (Zero Assumption Recovery) z-a-recovery[dot]com/. The backup creation (an .ISO file or some such) and media recovery are free of charge.
Now I only need to remove duplicates and blurry pics (I think I had a Moleskinsoft's Clone Remover from an old PC magazine's CD lying around somewhere for the latter). Oh, and I better not forget to run a malware scanner on her PC and remove the mr.fone installed services and folders from it. Went a bit off-topic here, sorry!
Last I pulled a wifi passwords file with "adb pull /data/misc/wifi/wpa_supplicant.conf" command as per instructions on this page: mashtips[dot]com/see-wifi-password-android/. I don't know whether putting the file back on that phone will do the trick or not.
That's pretty much all.
I hope the situation can be resolved and I appreciate your input! :fingers-crossed: Maybe someone has come across a similar post, has constructive commentary or knows something obvious that I haven't come up with? Thank you in advance!
Edit 30 Jan '19: Got the phone working. Accessed the phone with a Chrome browser extension (name here). All accounts except some mail account were gone. WiFi didn't work.
Found a stock ROM here: (address here).
Found the Odin3 tool here: (address here). It came with a different locale ROM.
Flashed the 1st ROM with Odin. The screen started to work.
Flashed the 1st ROM with Odin again. The WiFi started working.
I'll update this with links soon.
Click to expand...
Click to collapse
I have a Samsung Galaxy Tab 10.1" SM-P580 and started working to root it so I could install more apps using a micro SD card. It was a long time ago with Android 7 or so and a while back I thought I would upgrade so I tried upgrading it to Android 11 and Lineage 18.1 and bare bones Google apps. This has been only partially successfully as the system runs but I cannot install any apps at all and have been unable to make any further progress. So I am looking to go back to the drawing board here. What recommendations do you have with regard to what to use that will allow me to install more apps? Thank you very much!
JR1979 said:
I have a Samsung Galaxy Tab 10.1" SM-P580 and started working to root it so I could install more apps using a micro SD card. It was a long time ago with Android 7 or so and a while back I thought I would upgrade so I tried upgrading it to Android 11 and Lineage 18.1 and bare bones Google apps. This has been only partially successfully as the system runs but I cannot install any apps at all and have been unable to make any further progress. So I am looking to go back to the drawing board here. What recommendations do you have with regard to what to use that will allow me to install more apps? Thank you very much!
Click to expand...
Click to collapse
I assume you got the basic stuff out of the way - unlocked bootloader, installed TWRP, etc.
Did you install a Gapps package?
If you prefer something more vanilla, without the LineageOS customizations, you can try an Android GSI, which is like turning your device into a Pixel tablet. Check out my guide here.
JR1979 said:
I have a Samsung Galaxy Tab 10.1" SM-P580 and started working to root it so I could install more apps using a micro SD card. It was a long time ago with Android 7 or so and a while back I thought I would upgrade so I tried upgrading it to Android 11 and Lineage 18.1 and bare bones Google apps. This has been only partially successfully as the system runs but I cannot install any apps at all and have been unable to make any further progress. So I am looking to go back to the drawing board here. What recommendations do you have with regard to what to use that will allow me to install more apps? Thank you very much!
Click to expand...
Click to collapse
There are differences between Android 7,8,9 and now, especially eg.the use of sd-cards and permissions for users in general. Maybe you have to check such things as "Allow Installing apps from unknown ressources" in Settings, or you ckeck magisk modules that could help.
abagm said:
There are differences between Android 7,8,9 and now, especially eg.the use of sd-cards and permissions for users in general. Maybe you have to check such things as "Allow Installing apps from unknown ressources" in Settings, or you ckeck magisk modules that could help.
Click to expand...
Click to collapse
Thanks for the input. I have it upgraded to Android 11. Yhe unknown resources shouldn't matter AFAIK, in this case, as I am only trying to install via Play Store. I was trying to work with Magisk - I have it installed. I was going to try the ExSD module but I haven't been able to add it.
V0latyle said:
I assume you got the basic stuff out of the way - unlocked bootloader, installed TWRP, etc.
Did you install a Gapps package?
If you prefer something more vanilla, without the LineageOS customizations, you can try an Android GSI, which is like turning your device into a Pixel tablet. Check out my guide here.
Click to expand...
Click to collapse
Thank you. I will look into that. I will look into what the differences are between that and LineageOS. Question: will the pen/stylus work under this configuration? Thank you again.
JR1979 said:
Thank you. I will look into that. I will look into what the differences are between that and LineageOS. Question: will the pen/stylus work under this configuration? Thank you again.
Click to expand...
Click to collapse
In theory, yes - because GSIs are meant to be used with the stock kernel, and the system image doesn't have to have any specific hardware support.
LineageOS is built from AOSP, with added tweaks and customizations. I used it for a while, but grew tired of the Magisk issues I was having (PHH builds have built in SuperSU) so I just went straight vanilla with GMS.
So I looked at your guide and decided to give it a shot. With Multidisabler, when I tried pushing that to the tablet with sideload, it failed. I have also been unable to move system.img to the tablet. I'm at a loss. I know I am missing something here but just can't figure out what I am doing wrong. I just want to get this tablet up and running with Android and being able to use the 400GB SD card.
Thanks.
JR1979 said:
So I looked at your guide and decided to give it a shot. With Multidisabler, when I tried pushing that to the tablet with sideload, it failed. I have also been unable to move system.img to the tablet. I'm at a loss. I know I am missing something here but just can't figure out what I am doing wrong. I just want to get this tablet up and running with Android and being able to use the 400GB SD card.
Thanks.
Click to expand...
Click to collapse
Does MTP work for you in TWRP? ADB sideload is only for installing zips from your computer; the correct command to send files to device storage is adb push. Still, if you're able to get storage access over USB in TWRP just move the files that way because it's simpler.
I'm honestly not sure if the multidisabler is necessary when using custom firmware or GSIs. I think most likely not.
V0latyle said:
Does MTP work for you in TWRP? ADB sideload is only for installing zips from your computer; the correct command to send files to device storage is adb push. Still, if you're able to get storage access over USB in TWRP just move the files that way because it's simpler.
I'm honestly not sure if the multidisabler is necessary when using custom firmware or GSIs. I think most likely not.
Click to expand...
Click to collapse
Sorry - I just saw this response from you. So MTP is enabled but my laptop was unable to see the tablet. I connected the SD card to my laptop and placed the system.img file on it and then dropped the SD card back into the tablet. I was able to see it in the File Manager. As you said to, I wiped /system and flashed the system.img file. It showed "[IMAGE FLASH COMPLETED]". But when I went to reboot from the main TWRP menu, it said there was no OS installed and asked if I was sure if I wanted to reboot. So I took a gamble and selected Reboot and System again. And I guess I lost on the gamble. It now just loops on the "Samsung Galaxy Tab A with S Pen" splash screen. Well, game over... for tonight.
JR1979 said:
Sorry - I just saw this response from you. So MTP is enabled but my laptop was unable to see the tablet. I connected the SD card to my laptop and placed the system.img file on it and then dropped the SD card back into the tablet. I was able to see it in the File Manager. As you said to, I wiped /system and flashed the system.img file. It showed "[IMAGE FLASH COMPLETED]". But when I went to reboot from the main TWRP menu, it said there was no OS installed and asked if I was sure if I wanted to reboot. So I took a gamble and selected Reboot and System again. And I guess I lost on the gamble. It now just loops on the "Samsung Galaxy Tab A with S Pen" splash screen. Well, game over... for tonight.
Click to expand...
Click to collapse
Don't worry about the No OS warning, I get the same thing on my Tab A after installing a GSI.
You formatted data, yes?
You did NOT wipe /boot or /product I hope?
Something I noticed with the LineageOS GSIs is that the securized ones bootlooped, and I had to flash one of the pre-rooted builds. Can you link the image you tried to flash?
As a test to ensure a GSI runs properly, download one of the Android Developer Preview GSIs and try installing that. Let me know how it goes.
I didn't wipe /boot or /product.
I did format data.
I used the system.img from the aosp_arm64-exp-T2B2.221216.006-9443277-e508d63f.zip file on this page, from the Android Developer Preview GSIs: https://developer.android.com/topic/generic-system-image/releases
I'm guessing I didn't select the right build ?
Thanks again!
JR1979 said:
I didn't wipe /boot or /product.
I did format data.
I used the system.img from the aosp_arm64-exp-T2B2.221216.006-9443277-e508d63f.zip file on this page, from the Android Developer Preview GSIs: https://developer.android.com/topic/generic-system-image/releases
I'm guessing I didn't select the right build ?
Thanks again!
Click to expand...
Click to collapse
I also just tried the system.img from gsi_gms_arm64-exp-T2B2.221216.006-9443277-12a8e193.zip file. I get the same results - the splash screen loop.
JR1979 said:
I also just tried the system.img from gsi_gms_arm64-exp-T2B2.221216.006-9443277-12a8e193.zip file. I get the same results - the splash screen loop.
Click to expand...
Click to collapse
And so I tried the system.img files from the 2 zip files that are in the Android 13 (stable) folder:
aosp_arm64-exp-TP1A.220624.014-8819323-996da050.zip
gsi_gms_arm64-exp-TP1A.220624.014-8819323-8a77fef1.zip
Neither of these work. I still get the splash screen boot loop.
One thing I noticed is when I wipe system, it shows:
========================================
Updating partition details...
...done
Full SELinux support is present.
MTP Enabled
Failed to mount '/system_root' (Invalid argument)
Formatting system using mke2fs...
Done.
Updating partition details...
...done
=========================================
It's almost tablet frisbee time.