Hi all
First time posting.
I have plugged in Mad Catz Mojo by male to male usb cable into bmy pc running Windows 10 but doesn't pick it up as a USB device and in Device Manager I get "Unknown USB Device (Port Reset Failed)"
How do I get this resolved so Mojo can work and I get reflash it?
Thanks
Related
Hi all,
I'm experiencing the above problem. It started last week when I tried to reflash the firmware to a third party firmware. The unit could power up as normal, wifi, bluetooth all working fine but not the USB. I've tried installing a utility which switches the mode from RNDIS to USB but it still failed .. hard resetting the device does not help either. Is there a way that I could revive the USB connection? I couldn't sync my contact etc at the moment with my PC.
BTW, currently I'm on Onyx Jr. 4.1.2. I could not update to any firmware due to this and I don't have microSD to SD converter which I could use to copy the firmware to the microSD.
TA.
Disconnect sync cable. Reconnect to different usb port on computer. Right click ActiveSync in taskbar. Click connections. Make sure "Allow USB connections" is checked. If above fails, uninstall usb adapter in device manager, reboot computer. It'll reinstall with stock drivers after reboot.
It may happen due to faulty USB cable. Try and use another cable and on some other computer and check
I've tried all that I could think off including removing activesync and reinstalling it back. I've few miniUSB lying around and I've tested many of them but my notebook just did not want to recognized the htc touch. I've tried using those cables with my wife's tytnII and they worked .. could it be the hardware problem inside htc touch itself?
Tried with a new USB cable found in my newly bought GPS and if I reseat the cable properly, my notebook could recognised the htc touch. So I guess a new cable does help.. thanks all for the help.
Ok...here is my story. I have a really big problem. I have the 10s(same is the advent vega) for about 3 weeks and i couldn't manage to connect it to my computer. I bought a male to male usb cable and when i plug in the tab and do the 2 sec back, 2 sec power thing my computer sees the tab as a unknown device. I tryed all the usb ports on my computer and nothing. I have xp but i tried on two other computers with win 7 and the same thing. I tried to update the driver from device manager ...tried to uninstall and search for new device and the same thing. I tried everything.... read all tutorials tried every usb driver... I ''broke '' my tablet and it won't boot now ...the backlight just starts and it turns off.So I need to connect my tab now badly.... so if someone could help....
Once more.....things i tried:
every usb port on comp
diffrent windows and computers
usb driver update
audi
vega tools
10000000 times to get in to the recovery mode (hoping that the comp would show the apx device)
I didn't get a usb cable with my device so i had to buy one..i found a male to male cable
So if anyone knows a way to help me with my unknown device problem... please do... i'm really sad that my tab is ''dead'' have it for a couple of weeks...
Do you have the device USB drivers?
I can send you the drivers and you can try to see if it works with your device , Not sure if it will fix the problem but you can try.
PM me your email and I will send you the file
same problem here, onluy "Unknown device".
Have the right drivers and tried to manuell select the drivers, but it won't work, see screenshot
I had the same issue, BUY ANOTHER CABLE, IF POSSIBLE DIFFERENT BRAND.
That solved my issue, believe it or not the cable was broken. This will work in case you have all the drivers and entered into recovery mode correctly.
Give it a try.
Hi!
I used to have the same problem with my Viewpad 10s whenever I came from stock version. What I found out was that the driver for advent vega must be a bit different from viewsonics.
Try to use the ones on viewsonics site and then try to flash...
...if not maybe its really a cable problem!
Cheers
I have zenfone 5 (16gb 2gb) version whenever i connect my phone to charger it shows charging using USB.....and when i coonect my phone to Computer it does not recognize.....plz someone help
Try with another USB cable, or try your USB cable with another phone on another computer.
Same problem here please help
Same issue here
-Tried reinstalling drivers
-changing ports
-changing USB cables
-restarting PC
-booting phone to safemode
-reformatting phone
-settings>storage>USB computer connection says USB is now disconnected if clicked.
Please help!thank you..
Current rom-Resurrection Remix L 5.5.8
So my wife note 4 (sprint) is stock (6.0.1) and works great except for it will not connect via USB to my windows 10 PC. Device manager shows:
Windows has stopped this device because it has reported problems. (Code 43)
A request for the USB device descriptor failed.
I would like to root in order to debloat but cannot connect to the PC in either download mode or just on.
I have tried installing Kies and drivers also I am using the original USB cable with no hubs.
Try another cable and another USB port.
It could be the on device micro usb socket. This type of socket is pathetically fragile and does have a high failure rate. I have seen this issue time after time...The older the device (and let's face it, the N4 isn't exactly the current flagship) the more often this port is the culprit.
Hi all!,
For some reason my shield stopped working, it only boots in safe mode, but no other option in the fastboot seems to work. Tried to plug in the shield to pc with a usb c to usb a cable but it is not showing up in device manager so I can't flash it. It was on stock, nothing was modded before also. Is there anyway to fix the no device on pc? i've tried to different pc and 2 cables, my phone works with those cables, it is only the shield that doesn't connect using the farthest usb from the hdmi.