$60 goes to the person who finds a way to get this working!
This is a random issue that I've been having that's driving me nuts. I have the N1 car dock along with a Clarion CZ500 BT car stereo and everything is working fine... BUT I cannot change the media volume over BT while docked.
Why do I need to? Because my call volume is terribly low and I'm constantly changing volume levels on my car stereo and occasionally blowing out my ear drums when I forget to lower it as the call is ending and the music starts up again automatically.
If I had access to change the media volume, I could set the BT media volume at a comfortable level (with Tasker's help obviously ) when the phone is docked and not have to ever adjust my volume!
I'm wondering if this is actually a PowerAMP issue, but I can't seem to test the issue properly because I can't find a music player with a volume control slider.
BTW, I know that this is a docking issue because when I'm simply connected over BT without being docked the media volume changes just fine.
I'm running CM7 nightlies for the record.
Thanks!
PowerAmp seems to have some minor issues with bluetooth. Or it might be the combo of that and CM7 as it does odd things at times for me.
Does your headset try to tell the phone how to change volume, or are you doing it from the volume control on the side of the dock? I find that the built-in music app lets me change the volume just fine from the buttons but that poweramp seems to be a bit temperamental about it. (Although there was an update today that may have fixed it, I haven't checked yet).
My car stereo doesn't communicate the volume change to my device, it just adjusts the stereo volume.
I'm not controlling the volume from the physical buttons because the only ones accessible are those on the dock and those aren't connected when you're not connected to the dock via BT. I'm controlling the volume using the volume slider on PowerAMP.
As I change the volume using the PowerAMP slider, I see the display for "Media volume playing over Bluetooth" and the volume bar changes but it doesn't affect the volume. The only time the sound gets affected is when I get to 0 in which case it mutes.
No one has any other ideas???
Mine just works with my Sony XAV-70bt. I set the volumes once, and it just keeps them working. So my suggestion, sell Clarion, buy Sony. Can i have my $25?
But seriously, a lot of these head units have a separate builtin volume for the handset profile vs an a2dp. Mine has a phone call volume, then a separate BT Audio volume. You might run through your settings, find a different media player, or try another rom/kernel. Are you connected via physical 3.5mm cable from the Car dock to your Clarion, or using a bluetooth connection to it?
BT. There are no volume settings that I can find for the specific profiles.
rickytenzer said:
BT. There are no volume settings that I can find for the specific profiles.
Click to expand...
Click to collapse
So you want to be able to control phone volume from the head unit? I don't believe this is possible at this point. I suppose someone could build an interface using the AVRCP profile that would control volume. In theory it's possible.
bimmerd00d said:
So you want to be able to control phone volume from the head unit? I don't believe this is possible at this point. I suppose someone could build an interface using the AVRCP profile that would control volume. In theory it's possible.
Click to expand...
Click to collapse
I just want to be able to modify the media volume when I'm docked and connected via BT to the stereo. It seems as if the OS blocks a volume change when docked and connected to an external BT and I simply want to override that "feature".
As I stated above, if I'm NOT docked but still connected to the stereo via BT, the volume can be changed.
I battled the same issue for a couple of months. Solution: Tasker on the android market.
I have it set that when I dock my phone the media and in-call volume both max out. As soon as I un-dock it everything returns to the previous levels.
It's even cheaper than your $25 bounty
edit: just saw your tasker comment...so do you have it installed? or is it still not enough workaround for you? I have my N1 connecting to the bluetooth on the dock for calls, but i also run a 3.5 line-out into the aux port on my radio for music
Ya it's installed. But I'm running through BT. That's where the problem originates.
Maybe try contacting the PowerAmp dev or leaving a message on the forum on his site?
My BT head unit is in the mail so if you haven't got a solution by the weekend I'll be wanting to try the same combination so I'll check it out then.
knightnz said:
Maybe try contacting the PowerAmp dev or leaving a message on the forum on his site?
My BT head unit is in the mail so if you haven't got a solution by the weekend I'll be wanting to try the same combination so I'll check it out then.
Click to expand...
Click to collapse
I don't think it's a PowerAMP issue. I mean, I get the volume dialog and it changes as I "turn the knob".
Does anyone know of another music player that has a volume slider?
So NO ONE knows of a music player with a volume slider other than PowerAMP? I would like to see if PowerAMP is the culprit.
Obligatory bump.
Alright, I'll pay $40. Someone please!
Dropping too low!
Geez, patience dude. It's not that critical.
To me it is. And as soon as it's off the first page it's lost for good.
It's just frustrating that there are so many good devs here and no one wants to lend a serious hand.
Best of luck to you. I discovered that the volume is automatically reset when the phone is in the dock, regardless of what you set it to manually (even if you change it while it is in the dock, it immediately changes itself back). What you might need to be looking for is a modification of either the car home app, or of whatever protocols are responsible for the volume change.
MaximReapage said:
Best of luck to you. I discovered that the volume is automatically reset when the phone is in the dock, regardless of what you set it to manually (even if you change it while it is in the dock, it immediately changes itself back). What you might need to be looking for is a modification of either the car home app, or of whatever protocols are responsible for the volume change.
Click to expand...
Click to collapse
That's what I'm willing to pay for.
When connecting my new $80 BlueAnt T1 headset, to my rooted Android phone running Bionix V with voodoo always resets the "Bluetooth In-Call volume" to a level that is really low. It seems to be dependent on the type of headset I use. On some headsets it's set to 100%, others to 0%, and others somewhere in between. During a call you can set the volume to a comfortable level with the hardware volume buttons on the phone, which persists during the same bluetooth session. However, once you disconnect and reconnect, the volume level is at it's "default" level again.
In the mornings, when I connect my bluetooth to my phone, I get a brief message "Adjusting volume for bluetooth", which denotes that there is some type of profile setting that is unique for that headset.
This problem can be very annoying when using a hands-free system for the car for example, because you always have to take your phone out of your pocket to adjust the volume, while driving. This issue creates a dangerous situation rather than preventing one. When receiving a call, I must now look at AND adjust my phone volume every time a call is accepted while I drive. The bluetooth in-call volume NEEDS a way to be set and retained, before someone is badly injured or worse.
The correct behavior should be that it stores the bluetooth in-call volume level for every bluetooth headset that is connected.
I've done some research on the internet, but it's very clear that many people are having this problem with a lots of different headsets.
It very well might be an Android problem, but that doesn't explain why I'm having this issue with the BlueAnt T1, not my other headsets.
I have a Samsung Vibrant with Android 2.2. Is anyone else having this issue?
Okay! It seems I found a workable solution (kind-of). I downloaded the free app 'Volume Locker' from the market. Volume Locker locks your sound volume levels inplace, to where if you accidentally change your levels, it puts them back in place where you locked them.
Now, what I did is I called someone using by bluetooth headset, I had to manually turned up the 'in-call bluetooth volume' then I activated the Volume Locker app.
Now, everytime I call out using my Bluetooth headset, I don't have to KEEP turning up the 'in-call bluetooth volume' that resets everytime I disconnect a call.
I hope the Android engineers who make these OS updates will recognize this BUG and develop a fix. For right now, I can use 'Volume Locker'.
This is a unique problem I've never seen on any other device. When I connect to a Bluetooth speaker (like the Aukey SK-S1), pushing the volume buttons changes the Bluetooth volume of the phone. This means that the speaker jumps volume steps two at a time.
For the earphones I use (Tronsmart S5), they also do double steps when controlling volume with the phone (they don't have their own volume control IIRC) this means either they're quiet or they're a bit too loud for office work, no intermittent step. Very annoying. Is this an Essential Phone problem or one with stock Android? My old Huawei devices do not do this with either Bluetooth accessory.
I actually have the G7 Power but the forum for that device is not very active right now so I thought I would ask here first.
Since getting my G7 Power I noticed that music I listen to through the BT FM transmitter I have in my car comes through noticeably quieter than it did with my previous phones (Note 4 and OnePlus 5). I am trying to see if a volume amplifier app out there actually works or not but I can't seem to get the desired results. Does anybody here have any similar experiences or insight?
Thanks.
Disable BT Absolute Volume in Developer Settings and turn unit volume to maximum.
Touch Build Number few times in About Phone to enable Developer Settings
mingkee said:
Disable BT Absolute Volume in Developer Settings and turn unit volume to maximum.
Touch Build Number few times in About Phone to enable Developer Settings
Click to expand...
Click to collapse
I was able to Disable BT Absolute Volume but I don't see a 'unit volume' setting anywhere unless you're just talking about turning up the volume on my phone. It still sounds relatively quiet on my FM transmitter.
So for as long as I can remember, my launch day OP5 has responded to BT volume changes (e.g. I turn the volume up or down from the BT device, speaker, or headphones, and the volume level on the phone is adjusted). Recently, I've noticed that this is no longer the case. I have tried both enabling and disabling that Developer Options > Disable absolute volume, but haven't been able to get back to the state I was in before.
I've tested with my Jabra Elite Sport headphones, and my Tribit XSound Go... But neither of them will make the phone volume level change...